Quix7 - D4 - 50Q

What important factor differentiates Frame Relay from X.25?

During a security assessment of a wireless network, Jim discovers that
LEAP is in use on a network using WPA. What recommendation
should Jim make?

Ben has connected his laptop to his tablet PC using an 802.11g
connection. What wireless network mode has he used to connect these
devices?

Lauren’s and Nick’s PCs simultaneously send traffic by transmitting at
the same time. What network term describes the range of systems on a
network that could be affected by this same issue?

Sarah is manually reviewing a packet capture of TCP traffic and finds
that a system is setting the RST flag in the TCP packets it sends
repeatedly during a short period of time. What does this flag mean in
the TCP packet header?

Gary is deploying a wireless network and wants to deploy the fastest
possible wireless technology. Due to technical constraints, he is
limited to using a 2.4 GHz option. Which one of the following wireless
networking standards should he use?

Chris is configuring an IDS to monitor for unencrypted FTP traffic.
What ports should Chris use in his configuration?

Which OSI layer includes electrical specifications, protocols, and
interface standards?

FHSS, DSSS, and OFDM all use what wireless communication method
that occurs over multiple frequencies simultaneously?

Brian is selecting an authentication protocol for a PPP connection. He
would like to select an option that encrypts both usernames and
passwords and protects against replay using a challenge/response
dialog. He would also like to reauthenticate remote systems
periodically. Which protocol should he use?

Which one of the following protocols is commonly used to provide
backend authentication services for a VPN?

Susan is deploying a routing protocol that maintains a list of
destination networks with metrics that include the distance in hops to
them and the direction traffic should be sent to them. What type of
protocol is she using?

Ben has configured his network to not broadcast an SSID. Why might
Ben disable SSID broadcast, and how could his SSID be discovered?

What network tool can be used to protect the identity of clients while
providing Internet access by accepting client requests, altering the
source addresses of the requests, mapping requests to clients, and
sending the modified requests out to their destination?

During troubleshooting, Chris uses the nslookup command to check
the IP address of a host he is attempting to connect to. The IP he sees
in the response is not the IP that should resolve when the lookup is
done. What type of attack has likely been conducted?

A remote access tool that copies what is displayed on a desktop PC to a
remote computer is an example of what type of technology?

Which email security solution provides two major usage modes: (1)
signed messages that provide integrity, sender authentication, and
nonrepudiation; and (2) an enveloped message mode that provides
integrity, sender authentication, and confidentiality?

During a security assessment, Jim discovers that the organization he is
working with uses a multilayer protocol to handle SCADA systems and
recently connected the SCADA network to the rest of the
organization’s production network. What concern should he raise
about serial data transfers carried via TCP/IP?

What type of key does WEP use to encrypt wireless communications?

Arnold is receiving reports from end users that their internet
connections are extremely slow. He looks at the firewall and
determines that there are thousands of unexpected inbound
connections per second arriving from all over the world. What type of
attack is most likely occurring?

What speed and frequency range is used by 802.11n?

The Address Resolution Protocol (ARP) and the Reverse Address
Resolution Protocol (RARP) operate at what layer of the OSI model?

Which of the following is a converged protocol that allows storage
mounts over TCP, and which is frequently used as a lower-cost
alternative to Fibre Channel?

Chris is building an Ethernet network and knows that he needs to span
a distance of more than 150 meters with his 1000BaseT network. What
network technology should he use to help with this?

Which of the following drawbacks is a concern when multilayer
protocols are allowed?

Chris uses a cellular hot spot (modem) to provide internet access when
he is traveling. If he leaves the hot spot connected to his PC while his
PC is on his organization’s corporate network, what security issue
might he cause?

In her role as an information security professional, Susan has been
asked to identify areas where her organization’s wireless network may
be accessible even though it isn’t intended to be. What should Susan
do to determine where her organization’s wireless network is
accessible?

The DARPA TCP/IP model’s Application layer matches up to what
three OSI model layers?

One of Susan’s attacks during a penetration test involves inserting
false ARP data into a system’s ARP cache. When the system attempts
to send traffic to the address it believes belongs to a legitimate system,
it will instead send that traffic to a system she controls. What is this
attack called?

Sue modifies her MAC address to one that is allowed on a network that
uses MAC filtering to provide security. What is the technique Sue
used, and what nonsecurity issue could her actions cause?

Jim’s audit of a large organization’s traditional PBX showed that
Direct Inward System Access (DISA) was being abused by third
parties. What issue is most likely to lead to this problem?

SMTP, HTTP, and SNMP all occur at what layer of the OSI model?

Lauren uses the ping utility to check whether a remote system is up as
part of a penetration testing exercise. If she does not want to see her
own ping packets, what protocol should she filter out from her packet
sniffer’s logs?

Lauren wants to provide port-based authentication on her network to
ensure that clients must authenticate before using the network. What
technology is an appropriate solution for this requirement?

Ben has deployed a 1000BaseT 1 gigabit network and needs to run a
cable to another building. If Ben is running his link directly from a
switch to another switch in that building, what is the maximum
distance Ben can cover according to the 1000BaseT specification?

Jim is building the network for a remote site that only has ISDN as an
option for connectivity. What type of ISDN should he look for to get
the maximum speed possible?

SPIT attacks target what technology?

What does a bluesnarfing attack target?

Which of the following options includes standards or protocols that
exist in layer 6 of the OSI model?

There are four common VPN protocols. Which group listed contains
all of the common VPN protocols?

What network technology is best described as a token-passing network
that uses a pair of rings with traffic flowing in opposite directions?