Microsoft 70-687 - Configuring Windows 8.1

A company has 100 client computers that run Windows 8.1.

You need to assign static IPv6 addresses to the client computers.

Which Windows Powershellcmdlet should you run?

• Set-NetTCPSetting

• Set-NetIPInterface

• Set-NetlPv6Protocol

• set-NetIPAddress

A company has client computers that run Windows 8.1. The corporate network is configured for IPv4 and IPv6.

You need to disable Media Sensing for IPv6 on the client computers without affecting IPv4 communications.

What should you do on each client computer?

• Run the Disable-NetAdapterBinding Windows PowerShell cmdlet.

• Run the Disable-NetAdapter Windows PowerShell cmdlet.

• Run the Set-NetlPv6Protocol Windows PowerShell cmdlet.

• Run the Set-NetlPv4Protocol Windows PowerShell cmdlet.

A company has 100 client computers that run Windows 8.1. The client computers are members of a workgroup.

A custom application requires a Windows Firewall exception on each client computer.

You need to configure the exception on the client computers without affecting existing firewall settings.

Which Windows PowerShell cmdlet should you run on each client computer?

• New-NetFirewallRule

• Set-NetFirewallSetting

• Set-NetFirewallRule

• Set-NetFirewallProfile

• New-NetIPSecMainModeRule

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1. Portable client computers connect to the corporate wireless network.

You have the following requirements:

Prevent users from configuring a wireless network by using settings from a USB flash drive.
Do not affect the use of other USB devices.

You need to create a Group Policy object (GPO) to meet the requirements.

Which GPO should you create?

• A GPO that disables the Allow only USB root hub connected Enhanced Storage Features policy setting.

• A GPO that enables wireless policy processing.

• A GPO that prohibits connections to mobile broadband networks when roaming.

• A GPO that configures Windows Connect Now settings.

A company has client computers that run Windows 8.1.

The client computers are connected to a corporate private network.

Users are currently unable to connect from their home computers to their work computers by using Remote Desktop.

You need to ensure that users can remotely connect to their office computers by using Remote Desktop. Users must not be able to access any other corporate network resource from their home computers.

Which setting should you configure on the home computers?

• Virtual Private Network connection

• Remote Desktop local resources

• DirectAccess connection

• Remote Desktop Gateway IP address

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1. Client computers use Window BitLocker Drive Encryption with a Trusted Platform Module (TPM) chip.

You need to create a Group Policy object (GPO) that will secure the TPM owner information.

Which policy setting should you configure?

• Enable the Turn on TPM backup to Active Directory Domain Services policy setting.

• Enable the Configure the level of TPM usage authorization information available to the registry policy setting.

• Set the Configure the level of TPM owner authorization information available to operating system policy setting to Full.

• Enable the Configure TPM platform validation profile policy setting.

A company has client computers that run Windows 8.1. The company uses Windows BitLocker Drive Encryption with the data-only option o all client computers.

You delete a file containing highly confidential information from your computer.

You need to clear the free space on the hard drive to minimize the chance of the confidential information being recovered.

Which command should you run on the client computer?

• manage-bde -w

• chkdsk/spotfix

• diskpart clean

• BdeHdCfg -target c: shrink

You deploy several tablet PCs that run Windows 8.1.

You need to minimize power usage when the user presses the sleep button.

What should you do?

• Configure the active power plan to disable Wake Timers.

• Configure the active power plan to use Fast Startup.

• In Power Options, configure the sleep button setting to Hibernate.

• In Power Options, configure the sleep button setting to Sleep.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1 and are joined to the domain.

You have the following requirements:

Ensure that files in shared network folders are available offline.
Maximize efficiency for users who connect to shared network folders from a mobile device.

You need to configure Group Policy settings to meet the requirements.

What should you do first?

• Enable and configure the Configure slow-link mode policy setting.

• Enable the Enable file synchronization on costed networks policy setting.

• Enable the Synchronize all offline files when logging on policy setting.

• Enable and configure the Specify administratively assigned Offline Files policy setting.

You install Windows 8.1 on a desktop computer. You create a system image and then install third-party desktop apps and create personal data. You disable the creation of restore points.

The computer is not running optimally.

You need to remove the third-party applications and preserve files that are stored in your Documents folder.

You start the computer from a system repair disk.

Which troubleshooting option should you use?

• Refresh your PC without affecting your files

• System Restore

• Remove everything and install Windows

• System Image Recovery

A company has client computers that run Windows 8.1. File History is on.

An employee downloads data to a folder on drive D named Archives.

You need to ensure that the user can restore files from the Archives folder by using File History.

What should you do?

• Configure the File History advanced settings to include the Archives folder.

• From the File History configuration options, change the drive and select the Archives folder.

• Create a library named History and add the Archives folder to the library.

• Move the Archives folder into the Windows system folder.

A company has client computers that run Windows 8.1.

You install a new device on a client computer. The device installation includes an application that runs when the computer starts. You experience problems with the application.

You need to prevent the application from running when the computer starts, without affecting any other application.

What should you do?

• Configure the application by using Task Manager.

• Run the bcdedit command.

• Configure the device by using Device Manager.

• Run the msconuig command.

A company has a branch office with client computers that run Windows 8.1. Files are saved locally on the client computers and are not backed up regularly.

You need to ensure that you can retrieve previous versions of locally saved files from each client computer.

Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

• 1. Configure a Shared Folder Named SharedArchive on the network
  2. Configure FIle History to use the SharedArchive folder.
  3. Turn on File History and copy the data to the Documents Library

• 1. Configure a Shared Folder names SharedArchive on the network
  2. Create a folder named Local Archive on the system drive
  3. Configure File History to use the LocalArchive folder

• 1. Create a folder named Local Archive on the system drive
  2. Configure a Shared Folder names SharedArchive on the network
  3. Configure File History to use the LocalArchive folder

An organization has client computers that run Windows 7.

You install the Windows Assessment and Deployment Kit (ADK) in the environment.

You capture user settings and data files to a network share, and then perform a clean installation of Windows 8.1 on the client computers.

You need to apply the user profiles from the Windows 7 installation to the Windows 8.1 installation.

What should you do?

• Run the Ioadstate command.

• Copy the Default Profile to a folder on drive C.

• Run the scanstate command.

• Run Windows Easy Transfer and select the user profile to migrate.

• Run the ImageX command

A computer currently runs a 32-bit version of Windows 7 Ultimate.

You need to deploy a 64-bit version of Windows 8.1 to the computer. The new deployment must be the only version of Windows on the computer.

Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

• 1. Start the computer from the Windows 8 installation media.
  2. Select the Custom installation option.
  3. Select the installation option to delete each partition on the hard drive.

• 1. Select the Custom installation option.
  2. Start the computer from the Windows 8 installation media.
  3. Select the installation option to delete each partition on the hard drive.

• 1. Select Upgrade installation option
  2. Using Windows Explorer, run the setup program from the Windows 8 installation media
  3. Select the installation option to delete each partition on the hard drive.

A company has 100 client computers that run Windows XP 64-bit Edition.

You are deploying new computers that run a 32-bit version of Windows B.

You need to transfer the contents of each user’s Documents folder to the new computer by using the least amount of administrative effort.

What should you do?

• Back up the folders by running the NTBackup command.
  Then restore the backup to the new computer.

• Manually copy the folder content to a USB flash drive.
  Then paste the files to the new computer.

• Use Windows Easy Transfer.

• Use the User State Migration Tool.

Ten client computers run Windows Vista and a custom application. The custom application is compatible with Windows 8.1.

You purchase 10 new computers that have Windows 8.1 pre-installed. You plan to migrate user settings and data from the Windows Vista computers to the Windows 8.1 computers. You install the User State Migration Toolkit (USMT) on a USB flash drive.

You need to ensure that the custom application settings are applied to the Windows 8.1 computers after the migration is complete.

Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

• 1. Run the scanstate command on the Windows Vista Computer
  2. Install the custom application on the Windows 8 Computers.
  3. Run the loadstate command on the Windows 8 computers.

• 1. Install the custom application on the Windows 8 computers.
  2. Run the scanstate command on the Windows Vista Computer
  3. Run the loadstate command on the Windows 8 Computer

• 1. Run the scanstate command on the Windows Vista Computer
  2. Run the loadstate command on the Windows 8 Computer
  3. Install the custom application on the Windows 8 computers.

A company has 100 client computers that run Windows 8.1.

You plan to install a custom app that requires a license key.

You need to ensure that the installation process does not prompt for the manual entry of a license key.

What should you do?

• Install and run the Microsoft Deployment Toolkit.

• Install and run the Microsoft Assessment and Planning Toolkit.

• Install and run the Windows App Certification Kit.

• Install and run the Windows Application Compatibility Toolkit.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1 and are members of the domain. Client computers maintain a list of sites in the Internet Explorer Restricted Sites security zone.

Users of one client computer are able to download and install an application from a site within the Restricted Sites zone.

You need to ensure that users of the computer can install applications only from sites that are not in the Restricted Sites zone.

What should you do?

• Run the Set-ExecutionPolicy Windows PowerShell cmdlet.

• Configure the Software Restriction Policy settings in the local Group Policy of the computer.

• Add the blocked application as a software restriction policy to the GPO that configures AppLocker.

• Run the Cet-AppLockerPolicy Windows PowerShell cmdlet.

• Add the blocked application as an additional AppLocker rule to the GPO that configures AppLocker.

You manage computers that run Windows 8.1.

You plan to install a desktop app named App1 on one of the client computers.
You need to install the app without any user interaction and without displaying a progress bar.

Which command should you run?

• msiexec /i appl.msi /qb

• msiexec /x appl.msi /qb

• msiexec /i appl.msi /qn

• msiexec /x appl.msi /qn

You update the video card driver on a portable computer that runs Windows 8.1.

When a user connects the portable computer to an external monitor, the external monitor duplicates the display on the portable computer screen.

You need to ensure that the user can display additional desktop space on the external monitor.

What should you do?

• Run the DisplaySwitch /extend command.

• Start the computer from the Windows 8.1 installation media and perform a system image recovery.

• Roll back the video card driver to the previous version.

• Run the sic /scannow command.

A company has client computers that run Windows 8.1.

You attempt to roll back a driver for a specific device on a client computer.

The Roll Back Driver button is unavailable in Device Manager.

You need to roll back the driver to the previous version.

What should you do first?

• In the system properties for hardware, modify the device installation settings.

• Disable driver signature enforcement.

• In the local Group Policy, modify the device installation restrictions.

• Run Device Manager as an administrator.

A company has an Active Directory Domain Services (AD DS) domain with one physical domain controller. All client computers run Windows 8.1.

A client computer hosts a Windows 8.1 virtual machine (VM) test environment. The VMs are connected to a private virtual switch that is configured as shown in the Virtual Switch Manager exhibit. (Click the Exhibit button.)

Exhibit shows a new virtual switch with the switch being a "Private Virtual Switch"

Configure the test environment to allow VMs to communicate with the host machine.
Minimize impact on the host machine.

You need to meet the requirements.

What should you do?

• Create a new virtual switch with a Private Network [CP1] connection type.

• Create a new virtual switch with an ExternalNetwork connection type.

• Change the VLAN ID of the private virtual switch to Enable Virtual LAN identification.

• Create a new virtual switch with an Internal Network connection type.

A company has client computers that run Windows 8.1. On all client computers, Internet Explorer has the Display intranet sites in Compatibility View option enabled and the Download updated compatibility lists from Microsoft option disabled.

The corporate website was designed for a previous version of Internet Explorer. When viewed on the client computers, menus and image on the corporate website are displayed out of place.

You need to ensure that the corporate website displays correctly on the client computers
without negatively impacting the display of any other website.

What should you do?

• Manually add the corporate website to the compatibility view settings.

• Enable the Display all websites in Compatibility View option.

• Disable the Display intranet sites in Compatibility View option.

• Manually download an updated compatibility list from Microsoft.

A portable computer that runs Windows 8.1 uses a mobile broadband connection for the corporate wireless network. The computer also has a wired corporate network connection. The computer successfully downloads Windows updates when connected to either network.

You need to ensure that the computer automatically downloads updates by using Windows Update only while connected to the wired corporate network connection.

What should you do?

• Set the corporate wireless network to metered.

• Set the corporate wireless network to non-metered.

• Configure the Specify intranet Microsoft update service location local Group Policy setting.

• Configure a Windows Firewall connection security rule.

A company has client computers that run Windows 8.1.

You need to create a baseline performance report that includes disk status by using the least amount of administrative effort.

What should you do?

• Start the System Diagnostics Data Collector Set.

• Create and start a custom Data Collector Set.

• Start the System Performance Data Collector Set.

• Add counters to Performance Monitor, and then print the Performance Monitor output.

A company has client computers that run Windows 8.1 in a kiosk environment.

You need to ensure that Windows updates are automatically applied and cannot be disabled by users.

What should you do?

• Configure Windows Update to install updates automatically.

• In the local Group Policy, enable the Turn on recommended updates via Automatic
  Updates policy setting.

• msiexec /i app1.msi /qn

• In the local Group Policy, configure the Remove access to use all Windows Update features policy setting.

A company has client computers that run Windows 8.1. Each computer has two hard drives.

You need to create a dynamic volume on each computer that maximizes write performance.

Which kind of dynamic volume should you create?

• Striped volume

• RAID 5 volume

• Spanned volume

• Mirrored volume

A local printer named PRINTER1 is shared from a client computer named COMPUTER1 that run a 32-bit version of Windows 8.1. A workgroup contains client computers that run a 64-bit version of Windows 8.1.

Computers in the workgroup can’t currently print to PRINTER1.

You need to ensure that the workgroup computers can print to PRINTER1.

Which three actions should you perform in sequence? (To answer, move the appropriate actions to the answer area and arrange them in the correct order.)

• 1. Obtain the 64-bit driver for Printer1
  2. Add the driver on COMPUTER1
  3. Connect the workgroup computers to Printer1

• 1. Add the driver on COMPUTER1
  2. Obtain the 64-bit driver for Printer1
  3. Connect the workgroup computers to Printer1

• 1. Add the driver on COMPUTER1
  2. Connect the workgroup computers to Printer1
  3. Obtain the 64-bit driver for Printer1

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1.

A local printer is shared from a client computer. The client computer user is a member of the Sales AD security group.

You need to ensure that members of the Sales security group can print to the shared printer and modify only their own print jobs.

Which permission should you grant to the Sales group?

• Manage queue

• Print

• Manage documents

• Manage this printer

• Manage spooler

Your computer runs Windows 8.1 and is connected to an Active Directory Domain Services (AD DS) domain.

You create a folder and share the folder with everyone in your organization.

You need to modify the NTFS permissions of the folder to meet the following criteria:

Users from the Supervisors AD security group must be able to open files, but not modify them.
Users from the Marketing AD security group must be able to create, modify, and delete files.
Users from both groups must not be able to delete the folder.

• Assign the Supervisors group the Read and Write permissions. Assign the Marketing group the Modify permission and the Delete Subfolders and Files special permission.

• Assign the Supervisors group the Read and Write permissions. Assign the Marketing group the Full Control permission.

• Assign the supervisors group the Read permission. Assign the Marketing group the Read and Write permissions and the Delete Subfolders and Files special permission.

• Assign the Supervisors group the Read permission. Assign the Marketing group the Read and Write permissions and the Delete special permission.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows Vista and are members of the domain. A Group Policy object (GPO) configuring a software restriction policy is implemented in the domain to block a specific application.

You upgrade a computer to Windows 8.1 and implement a GPO that configures an AppLocker rule in the domain. The blocked application runs on the Windows 8.1 computer but not on the Windows Vista computers.
You need to ensure that the application is blocked from running on all computers and the AppLocker rule is applied to the computers in the domain.

What should you do?

• Add the blocked application as an additional AppLocker rule to the GPO that configures AppLocker.

• Run the Get-AppLockerPolicy Windows PowerShell cmdlet.

• Run the Set-ExecutionPolicy Windows PowerShell cmdlet.

• Configure the software restriction policy as a local policy on the Windows 8.1 computer.

• Add the blocked application as a software restriction policy to the GPO that configures AppLocker.

A company has client computers that run Windows 8.1. Users store data on company- issued USB flash drives.

You establish that users are able to store data on personally owned USB flash drives.

You need to ensure that users can save data on company flash drives but not on personal flash drives.

What should you do?

• Disable driver signature enforcement.

• Run Device Manager as an administrator.

• In the local Group Policy, modify the device installation restrictions.

• In the system properties for hardware, modify the device installation settings.

You manage computers that run Windows 8.1.

You plan to install a desktop app named MarketingApp on one of the client computers.

You need to display a progress bar to the user while installing the app.

Which command should you run?

• msiexec /i marketingapp.msi Jqn

• msiexec /i marketingapp.msi /qb

• msiexec /x marketingapp.msi /qb

• msiexec /x marketingapp.msi /qn

A company has 10 client computers that run Windows 8.1. You are responsible for technical support. You purchase a support tool from the Windows Store while logged in with your Microsoft account.

You install the support tool on several client computers.

Three months later, you attempt to install the support tool on another client computer. The installation fails.

You need to ensure that you can install the support tool on the client computer.

What should you do?

• Log in with your Microsoft account and remove a computer from the Windows Store device list.

• On the computer on which you want to install the tool, synchronize the Windows Store application licenses.

• Disassociate your Microsoft account from the computer on which you want to install the tool. Then reassociate your Microsoft account with the computer.

• Reset your Microsoft account password.

You update the video card driver on a computer that runs Windows 8.1.

You can no longer configure the display settings to extend the display to a projector.

You need to restore the display options as quickly as possible and retain all user data.

What should you do?

• Roll back the video card driver to the previous version.

• Run the DisplaySwitch/extend command.

• Run the sic /scannow command.

• Start the computer from the Windows 8.1 installation media and perform a system image recovery.

A company has an Active Directory Domain Services (AD DS) domain with one physical domain controller. All client computers run Windows 8.1.

A client computer hosts a Windows 8.1 virtual machine (VM) test environment. The VMs are connected to a private virtual switch that is configured as shown in the Virtual Switch Manager exhibit.

The VMS are unable to connect to the domain controller. You have the following requirements:

Configure the test environment to allow VMs to communicate with the domain controller.
Ensure that the VMs can communicate with other VMS fl the test environment when the domain controller is unavailable.

You need to meet the requirements.

What should you do first?

• Create a new virtual switch with an Internal Network connection type.

• Create a new virtual switch with a Private Network connection type.

• Create a new virtual switch with an External Network connection type.

• Change the connection type of the private virtual switch to Internal only.

A company has an Active Directory Domain Services domain. All client computers run Windows 8.1 and are joined to the domain.

You run the ipconfiq command on a client computer. The following output depicts the results.

Ethernet adapter Local Area Connection 3:

IPv4........... - 192.168.1.102
Subnet...... - 255.255.255.0
Gateway... -

You need to ensure that you can establish a DirectAccess connection from the client computer to the network.

What should you do?

• Create a new VPN connection.

• Remove the computer from the domain.

• Enable IPv6 on the network adapter.

• Configure a static IPv4 address.

An organization has client computers that run Windows 7. You upgrade the client computers to Windows 8.1 without migrating the local user profiles. You install the Windows Assessment and Deployment Kit (ADK) in the environment.

You need to migrate the user profiles from the Windows 7 installation to the Windows 8.1 installation.
What should you do first on each client computer?

• Run the scanstate command.

• Run Windows Easy Transfer and select the user profile to migrate

• Run the Ioadstate command.

• Copy the Default Profile to a folder on drive C.

• Run the ImaqeX command.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1.

A local printer is shared from a client computer. The client computer user is a member of the Sales AD security group.

You need to ensure that members of the Sales security group can modify the order of documents in the print queue, but not delete the printer share.

Which permission should you grant to the Sales group?

• Manage queue

• Manage this printer

• Print

• Manage spooler

• Manage documents

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1.

A notification appears when domain users change Windows settings and when applications try to make changes to client computers.

You need to ensure that a notification appears only when an application tries to make changes to the computer.

What should you do?

• Configure the Notification Area Icons settings on the client computers.

• Create a Group Policy object (GPO) that enables the Admin Approval Mode for the built- in Administrator account policy.

• Configure the User Account Control (UAC) settings on the client computers.

• Create a Group Policy object (GPO) that disables the Run all administrators in Admin Approval Mode policy.

Your computer runs Windows 8.1 and is connected to an Active Directory Domain Services (AD DS) domain.

You create a folder and share the folder with everyone in your organization.

You need to modify the NTFS permissions of the folder to meet the following criteria:

Users from the Marketing security group must be able to open files, but not modify them.
Users from the Supervisors security group must be able to create, modify, and delete files.
Users from both groups must not be able to delete the folder.

Which permissions should you set?

• Assign the Marketing group the Read permission. Assign the Supervisors group the Read and Write permissions and the Delete Subfolders and Files special permission.

• Assign the Marketing group the Read and Write permissions. Assign the Supervisors group the Full Control permission.

• Assign the Marketing group the Read and Write permissions. Assign the Supervisors group the Modify permission and the Delete Subfolders and Files special permission.

• Assign the Marketing group the Read permission. Assign the Supervisors group the Read and Write permissions and the Delete special permission.

You deploy several tablet PCs that run Windows 8.1.

You need to minimize power usage when the user presses the sleep button.

What should you do?

• In Power Options, configure the sleep button setting to Hibernate.

• Disable the C-State control in the computer’s BIOS.

• Configure the active power plan to set the system cooling policy to passive.

• In Power Options, configure the sleep button setting to Sleep.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1.

You need to minimize the amount of Trusted Platform Module (TPM) authorization information that is stored in the registry.

What should you do?

• Enable Platform Configuration Register indices (PCRs) 0, 2, 4, and 11 for the Configure TPM validation profile for native UEFI firmware configuration policy setting.

• Create a Group Policy object (GPO) that disables the Configure the level of TPM owner authorization information available to operating system policy setting.

• Create a Group Policy object (GPO) that sets the Configure the level of TPM owner authorization information available to operating system policy setting to None.

• Create a Group Policy object (GPO) that enables the Turn on TPM Local Encryption policy setting.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run

Windows 8.1 and are joined to the domain.

You have the following requirements:

Ensure that files in shared network folders are available offline.
Minimize all data access times.
Reduce network bandwidth usage.

You need to configure Group Policy settings to meet the requirements.

What should you do first?

• Enable the Enable file synchronization on costed networks policy setting.

• Enable and configure the Configure slow-link mode policy setting.

• Enable and configure the specify administratively assigned Offline Files policy setting.

• Enable the Synchronize all offline files when logging on policy setting.

A company has client computers that run Windows 8.1. The company uses Windows BitLocker Drive Encryption with the data-only option o all client computers.

You need to remove data fragments that exist in the free space on the local computer disk drives, without affecting current user data.

Which command should you run on the computers?

• BdeHdCfg

• diskpart

• chkdsk

• manage-bde

A company has 100 client computers that run Windows 8.1.

The client computers are connected to a corporate private network.

Users are currently unable to connect from their home computers to their work computers by using Remote Desktop.

You need to ensure that users can remotely connect to their office computers by using
Remote Desktop. Users must not be able to access any other corporate network resource from their home computers.

What should you do?

• Configure a Virtual Private Network connection.

• Configure the Remote Desktop Gateway IP address in the advanced Remote Desktop Connection settings on each client.

• Configure the local resource settings of the Remote Desktop connection.

• Configure a DirectAccess connection.

You install Windows 8.1 on a desktop computer and install a third-party desktop app. The computer runs optimally until you install another third-party desktop app.

You need to remove only the most recently installed third-party desktop app.

You start the computer from a system repair disk.

Which troubleshooting option should you use?

• System Image Recovery

• Remove everything and install Windows

• System Restore

• Refresh your PC without affecting your files

A company has a main office and three branch offices. The company has 20 portable computers that run Windows 8.1. Portable computer users can install local devices while in any branch office.

Your manager has instructed you to collect information about faulty devices and drivers within the company’s branch offices.

You need to create a performance report that includes a list of incorrectly installed devices by using the least amount of administrative effort.

What should you do?

• Add counters from each portable computer to Performance Monitor, and then print the Performance Monitor output.

• Start the System Performance Data Collector Set on each portable computer.

• Start the System Diagnostics Data Collector Set on each portable computer.

• Create and start a custom Data Collector Set on each portable computer.

A company has an Active Directory Domain Services (AD DS) domain. Client computers in the Test department run Windows 8.1 and are connected to the domain.

You need to ensure that Windows updates are not automatically applied and cannot be enabled by users.

What should you do?

• Create a Group Policy object (GPO) to enable the Turn on recommended updates via Automatic Updates policy setting.

• Configure Windows Update to install updates automatically.

• Create a Group Policy object (GPO) to configure the Remove access to use all Windows Update features policy setting.

• Create a Group Policy object (GPO) to configure the Configure Automatic Updates policy setting.

A portable computer that runs Windows 8.1 uses a mobile broadband connection for the corporate wireless network.

The computer also ha a wired corporate network connection. The computer successfully downloads Windows updates when connected to either network.

You need to ensure that the computer automatically downloads updates by using Windows Update while also connected to the wireless corporate network connection.

• Set the corporate wireless network to metered.

• Set the corporate wireless network to non-metered.

• Configure the Specify intranet Microsoft update service location local Group Policy setting.

• Configure a Windows Firewall connection security rule.

A company has client computers that run Windows 8.1. Each computer has two hard drives.

You need to create a dynamic volume on each computer that maximizes write performance with data fault tolerance.

Which kind of dynamic volume should you create?

• Striped Volume

• RAID 5 Volume

• Spanned Volume

• Mirrored Volume

All client computers in a company’s network environment run Windows 8.1. A client computer has two internal hard disk drives. The hard drives are configured as shown in the following table.

Drive . Size . Free Space . Type
------------------------------------------------------------------
C . 250GB . 20GB . Dynamic
D . 500GB . 450GB . Dynamic

You are choosing a backup destination for drive C.

You have the following requirements:

Ensure that the backup file is available if drive C fails.
Ensure that the backup file can be accessed by other computers on the network.
Support the backup of multiple system images.

You need to select a backup destination that meets the requirements.

Which destination should you select?

• shared network folder

• drive D

• multiple DVDs

• external hard drive

You are in the process of setting up File History on your workstation.

You are configuring the Size of offline cache Advanced settings.

Which of the following is the default setting?

• 2%

• 5%

• 10%

• 20%

You are in the process of setting up File History on your workstation.

You are configuring the Save copies of files Advanced settings.

Which of the following is the default setting?

• 15 minutes

• 30 minutes

• 1 hour

• 6 hours

You are employed as an administrator at contoso.com.

The network consists of a single Active Directory Domain Services (AD DS) domain, named contoso.com.

All workstations on the contoso.com network have Windows 8.1 installed.

You need to configure files history on a client system.

You notice that the free storage space on the selected drive is low, but you do not have a spare drive to replace it.

What should you do?

• Configure the save copies of files setting to back up files once a day.

• Configure Size of offline cache setting to 2%

• Keep saved versions setting to be 1 month

• Keep saved versions setting until space is needed

You are employed as an administrator at contoso.com. The contoso.com network is made up of an Active Directory Domain Services (AD DS) domain, named ABC.com.

All workstations on the contoso.com network, including laptops, have Windows 8.1 installed.

Your users have just been issued new laptops for use outside the office.

These users currently log in to their desktop workstations using a Windows domain account.

They would like their laptops to be set up exactly like their desktop workstations.

Which of the following would easily allow them to achieve this?

• Transfer the user settings with the File and Transfer wizard

• Windows Easy Transfer

• Migrate the user profiles with USMT

• Link the Windows domain accounts to a Windows Live ID.

A company has 50 touch-enabled client computers that run Windows 7.

You are planning to migrate the client computers to Windows 8.1. You have the following requirements:

Choose the installation or upgrade path that includes touch-optimized desktop versions of Microsoft Word, Excel, PowerPoint, and OneNote.
Minimize new hardware requirements.

You need to choose the path that meets the requirements.

Which path should you choose?

• Upgrade to Windows RT

• Perform a clean installation of Windows 8.1 Enterprise

• Purchase hardware with Windows RT pre-installed.

• Upgrade to Windows 8.1 Enterprise.

A company has 100 client computers that run Windows Vista. The company uses several custom applications.

The company plans to replace the Windows Vista computers with new computers that run Windows 8.1.

You need to establish which of the currently installed applications will work on Windows 8.1.

What should you do?

• Install and run the Windows App Certification Kit.

• Install and run the Microsoft Assessment and Planning Toolkit.

• Install and run the Microsoft Deployment Toolkit.

• Install and run the Windows Application Compatibility Toolkit.

A company has 10 client computers that run Windows 8.1. Employees log on to resources by using multiple accounts.

You need to back up the user name and password for each logon account.

What should you do on each client computer?

• Back up each user’s Personal Information Exchange PKCS #12 (.pfx) certificate.

• Use Credential Manager to save the information to a USB flash drive.

• Use File History to back up the ntuser.dat file.

• Run the Export-Certificate Windows PowerShell cmdlet.

A company has client computers that run Windows 8.1. You implement an AppLocker file hash rule that allows an application to run. You then apply a service pack to the application.

When users attempt to run the application, the application is blocked by Group Policy.

You need to ensure that the application runs.

What should you do?

• Enable the Reschedule Automatic Updates scheduled installations Group Policy setting.

• Set the wired network connection to non-metered.

• Set the wired network connection to metered.

• Configure the Automatic Maintenance setting.

A company has an Active Directory Domain Services (AD DS) domain. The corporate environment includes a Windows Software Update Services (WSUS) server. All client computers run Windows 8.1 and a custom web application. The company has a Microsoft Software Assurance for Volume Licensing agreement.

After deploying Windows Updates to the computers, the web application stops responding. You establish that a specific optional update installed by Windows Update is causing the problem. In the Windows Update Control Panel item, the option to remove the update is unavailable.

You need to remove the optional update from one client computer.

What should you do?

• Install and run the Debugging tools for Windows.

• Clear the SusClientID registry value on the client computer.

• Restart the computer from a Diagnostic and Repair Toolset (DaRT) boot disk and use the Crash Analyzer tool.

• Run the wuauclt /resetauthorization command on the client computer.

• Restart the computer from a Diagnostic and Repair Toolset (DaRT) boot disk and use the Hotfix Uninstaller tool.

A client computer that runs Windows 8.1 has two hard disk drives: a system drive and a data drive.
You are preparing to back up the computer prior to installing a developing software product.

You have the following requirements:

The system disk that is part of the backup must be mountable from within Windows.
The system disk that is part of the backup must be bootable.
The backup must be viable to restore in the event of a hard disk failure.
The backup must contain data from both hard disk drives.

You need to select a backup method.

Which method should you use?

• System repair disk

• Storage pool

• System image

• File History

A company has client computers that run Windows 8.1. The client computer systems frequently use IPSec tunnels to securely transmit data.

You need to configure the IPSec tunnels to use 256-bit encryption keys.

Which encryption type should you use?

• 3DES

• DES

• RSA

• AES

You are configuring a computer that will be used in a kiosk in a public area. You install a new internal hard drive.

You need to protect the computer from starting an unauthorized operating system.

What should you do?

• Ensure that the computer BIOS supports Unified Extensible Firmware Interface (UEFI) and is enabled.
  Install Windows 8.1 Pro 64-bit using UEFI and install it on the internal hard drive.

• Install Windows 8.1 Pro 64-bit on the internal hard drive.
  Enable BitLocker on the internal hard disk.

• Partition the internal hard drive as MBR disk.
  Install Windows 8.1 Enterprise 64-bit.

• Partition the internal hard drive as GPT disk.
  Install Windows 8.1 Pro 64-bit.

A desktop computer that runs Windows 8.1 downloads updates but does not install them. The computer is connected to the corporate network by using a wired network connection.

You need to ensure that the computer automatically installs updates.

What should you do?

• Set the wired network connection to non-metered.

• Configure the Automatic Maintenance setting.

• Enable the Reschedule Automatic Updates scheduled installations Group Policy setting.

• Set the wired network connection to metered.

You administer Windows 8.1 computers in your company network.

You install a new video driver. The computer will not start properly after restart. You are able to enter Safe Mode with Command Prompt.
You need to be able to start normally. You also need to ensure that user data is not lost.

What should you do?

• Run the rstrui.exe command.

• Roll back the driver.

• Turn on File History.

• Create a restore point.

You administer computers in your company network. All computers in the network belong to a single Active Directory Domain Services (AD DS) domain. The network includes Windows Server 2012 servers located in a perimeter network.

You add a new Windows 8.1 computer to the perimeter network. You enable only Remote Desktop access to the Windows 8.1 computer from other computers located outside the perimeter network.

You need to use the Windows 8.1 computer to manage the Windows servers in the perimeter network.

What should you do?

• Add the Windows 8.1 computer as a Trusted Host to the servers.

• Enable PowerShell Remoting on the Windows 8.1 computer.

• Add the Windows 8.1 computer as a Trusted Host to computers outside the perimeter network.

• Install Remote Server Administration Tools for Windows 8.1 (RSAT) on the Windows 8.1 computer.

A company has 10 portable client computers that run Windows 8.1.

The portable client computers have the network connections described in the following table.

Network Name...............Connection Type...................Network Profile
CorpWifi..................................Wireless...............................Private..........
CorpWired................................Wired..................................Public...........
HotSpot.............................Public Hotspot..........................Public...........

None of the computers can discover other computers or devices, regardless of which connection they use.

You need to configure the connections so that the computers can discover other computers or devices only while connected to the CorpWired or CorpWifi connections.

What should you do on the client computers?

• For the CorpWired connection, select yes, turn on sharing and connect to devices.

• Change the CorpWired connection to public. Turn on network discovery for the Public profile. For the HotSpot connection, select No, don’t turn on sharing or connect to devices.

• For the CorpWifi connection, select yes, turn on sharing and connect to devices.

• Turn on network discovery for the Public profile.

• Turn on network discovery for the Private profile.

You administer Windows 8.1 Pro laptops in your company network. Your network has a
Remote Access Server (RAS) in a perimeter network that runs Windows Server 2012.

All laptop users have a PPTP VPN configured on their computer. Users report that their VPN disconnects when they switch between WLAN and WWAN networks.

You need to ensure that if a VPN is disconnected, the laptop will automatically attempt to reconnect.

What should you do?

• Create a new VPN connection, and the open Local Computer Policy and define Files not cached policy.

• Run the netsh.exe command and include the wlan parameter

• Create a new VPN connection, and disable offline files

• Create a new Remote Desktop connection, and then set the Local Computer policy to Disable drives redirection for Remote Desktop Services.

You administer client computers in your company network. The network includes an Active Directory Domain Services (AD DS) domain.

Employees in the human resources (HR) department are getting new Windows 8.1 Enterprise computers. The HR department uses a line of business (LOB) Windows Store app named Timesheet that is not available in Windows Store.

You need to ensure that all employees in the HR department can use Timesheet on their new computers.

What should you do?

• Use a Microsoft account to log on to each computer.

• Use a local account to log on to each computer.

• Activate the side loading product key on each computer.

• Install and run the Windows App Certification Kit.

You install Windows 8.1 Enterprise on new laptops that will be shipped to remote users in the sales department of your company. You create new VPN connections on the laptops.

Your company security policy requires that the maximum allowed network outage time for the VPN connection should be less than 10 minutes.

You need to configure the required timeout.

Which protocol should you use?

• 

• Here is a hint you A-hole

A company has client computers that run Windows 8.1. Each computer has two hard drives.

You need to create a dynamic volume on each computer to support the following features:

Fault tolerance
Fast write performance

What kind of dynamic volume should you create?

• Striped volume

• Spanned volume

• RAID 5 volume

• Mirrored volume

A portable computer that runs Windows 8.1 uses a mobile broadband connection. The computer successfully downloads Windows updates only when not connected to the corporate wireless network.

You need to ensure that the computer automatically downloads updates by using Windows Update while connected to the corporate wireless network.

What should you do?

• Configure the Specify intranet Microsoft update service location local Group Policy setting.

• Set the corporate wireless network to metered.

• Set the corporate wireless network to non-metered.

• Configure a Windows Firewall connection security rule.

You administer Windows 8.1 Enterprise computers in your company’s Active Directory Domain Services (AD DS) domain.

Your company uses several peripheral devices. The drivers for these devices are not available on Windows Update.

You need to ensure that the drivers install when users connect these devices to their computers.

What should you do?

• For the Group Policy setting Prioritize all digitally signed drivers equally during the driver ranking and selection process, select Disabled.

• From Device Manager, find the detected scanner device and select Update Driver.

• Add the following registry key to the computers:
  HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/DevicePath. Add ?osystemroot%\inf and the UNC path to the drivers share.

• For the Group Policy setting Configure driver search locations, select Enabled. Make the drivers available on the UNC path to the driver’s share.

You use a Windows 8.1 Pro computer. The computer stores research data in a folder named C:\Research.
You turn on File History.

You need to back up the Research folder.

What should you do?

• Create a new library and include the folder in the library.

• Create a new volume mount point in the root of the folder.

• Create a new storage space and move the folder to the storage space.

• Create a new restore point.

You administer 100 Windows 8.1 laptops, all of which have PowerShell Remoting enabled.

You run the following command on a computer named Computer1.

Invoke-Command -filepath \\Computer2\Share\MyScript.ps1 -computer name Computer2

MyScriptl.psl fails to execute.

You verify that you are able to access it from the network.

You need to be able to execute MyScriptl.psl on Computer1.

What should you do?

• Copy MyScriptl.psl to a local drive on Computer1 and run the Invoke-Command cmdlet on Computer1.

• Run the Set-ExecutionPolicycmdlet on Computer1.

• Run the Enter-PSSessioncmdlet on Computer1.

• Run the Set-ExecutionPolicycmdlet on Computer2.

You administer Windows 8.1 computers for a software development company.

The marketing department is going to meet a potential customer to demonstrate the product. You want to configure a laptop that has a stand-alone virtual machine that runs Windows 8.1 Enterprise and the latest build of your software.

You need to enable BitLocker on the system drive of the virtual machine.

What should you do first?

• Activate Windows.

• Join the virtual machine to an Active Directory Domain Services (AD DS) domain.

• Turn on the Require additional authentication at startup local policy.

• Turn off the Require additional authentication at startup local policy.

A company has a main office and several branch offices. The company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1. All printers are deployed to all client computers by using Group Policy.

When a user attempts to print from his portable client computer while at a branch office, the main office printer is set as his default printer.

You need to ensure that a location-specific default printer for each branch office is set for the user.

What should you do?

• Create a Group Policy object (GPO) that enables the Computer location policy setting.

• In the Manage Default Printers dialog box, select the Always use the same printer as my default printer option.

• In the Manage Default Printers dialog box, select the Change my default printer when I change networks option.

• Create a Group Policy object (GPO) that enables the Allow Print Spooler to accept client connections policy setting.

A computer runs Windows 8.1. You install an application by running an .msi file.

You need to apply a patch to the application.

Which command should you run?

• dism /Online /add-package:C:\MyPatch.msp

• dism /get-AppPatches /get-PackageInfo:C:\MyPatch.msp

• msiexec /x “C:\MyPatch.msp”

• msiexec/p “C:\MyPatch.msp”

A company has client computers that run Windows 8.1.

Users can run applications that have been downloaded from the Internet only with administrator approval.

You need to ensure that users can run downloaded applications without administrator approval.

What should you do?

• Set the Internet zone privacy level to Low.

• Set the Internet zone security level to Medium.

• Set the User Account Control (UAC) settings to Never notify.

• Turn off Windows SmartScreen.

A company has client computers that run Windows 8.1. File History is on.

An employee downloads data to a folder on drive D named Archives.

You need to ensure that the user can restore files from the Archives folder by using File History.

What should you do?

• Create a library named History and add the Archives folder to the library.

• Start the Windows Backup service.

• Turn on the Volume Shadow Copy Service.

• Start the Block Level Backup Engine service.

You administer Windows 8.1 Pro computers in your company network.

A user named User1 encrypts a sensitive file named file.txt by using Encrypting file systems (EFS) A user named User2 must be able to read file.txt.

You need to configure unencrypted read access to file.txt for User2

What should you do?

• Configure Advanced Attributes

• Configure Effective Access

• Configure Advanced Security Settings

• Share the folder that contains file.txt.

You plan to purchase new Windows 8.1 tablets for you company network.

You need to ensure that tablet users are able to use the Windows 8.1 Snap feature.

Which hardware specifications should you meet in choosing tablets?

• monitor and video adapter that support a minimum screen resolution of 1366 x 768

• monitor that supports at least three simultaneous touches

• monitor that supports at least five simultaneous touches

• monitor and video adapter that support a minimum screen resolution of 1024 x 768

You have a computer that runs Windows 8.1. You install a custom application by using an .msi file that is located in your Documents library.

The computer begins to experience performance issues. You decide to reinstall the custom application. When you run the .msi file, you receive an error message about a corrupted file.

You need to ensure that you can reinstall the application.

What should you do?

• Run the replace command, specify the application’s .msi file as the source, and then specify the application’s original installation directory as the destination.

• Use file History to revert the application’s .msi file to a previous version.

• Run the msiexec /f command and specify the application’s .msi file.

• Run the reset /f command and specify the application’s .msi file.

A company has client computers that run Windows 8.1.

When a user tries to print from his portable client computer while connected to the corporate network, he discovers that the default printer is set to his home printer instead of to the office printer.

You need to ensure that the default printer for the computer is the office printer when the computer is connected to the corporate network and the user’s home printer when the computer is connected to his home network.

What should you do on the portable computer?

• In the printer properties of the corporate printer, configure the active port with the correct TCP/IP settings for the printer.

• Install the corporate printer and set it as the default printer. Then add the home printer to the homegroup settings.

• Connect to the home network and choose Connect from the shared printer object context menu. Then connect to the corporate network and choose Connect from the shared printer object context menu.

• Set a default printer for each network.

You install Windows 8.1 on a client computer.

Several days later, you establish that the computer has been infected by malware. You are unable to establish when the computer was infected.

You need to restore the client computer to full functionality.

What should you do?

• Start the computer using the Last Known Good Configuration option.

• Use the Refresh your PC without affecting your files function.

• Start the computer in Safe Mode.

• Use the Remove everything and install Windows function.

A company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 8.1 and are joined to the domain. All Sales department employees are members of the Sales organizational unit (CU). AppLocker rules control the installation of applicatior on client computers.

You create a new Group Policy object (GPO) to configure an AppLocker file hash rule. The file hash rule allows an application to run and links the application to the Sales OU. Several minutes later, you establish that the AppLocker rule is not present on some computers within SalesOU and the application cannot run.

You need to quickly ensure that the application can run.

What should you do?

• Run the Get-AppLockerPolicy Windows PowerShell cmdlet.

• Configure the AppLocker properties to enforce rules.

• Run the gpupdate /force command.

• Create a new AppLocker file hash condition.

You administer Windows 8.1 laptops in your company network.

You install several custom desktop applications on the laptops.

You need to create a custom recovery image for Windows to use when selecting the Refresh your PC option. The custom recovery image must include the custom desktop applications.

Which command should you use to create the custom recovery image?

• Recdisc.exe

• Recover.exe

• Recimg.exe

• RecoveryDrive.exe

A computer that runs Windows B has two hard disk drives. The user stores data files in specific storage locations outside of the standard libraries on both drives.

File search results are delayed.

You need to return relevant search results more quickly.

What should you do?

• Remove all directories from indexed locations.

• Add the specific storage locations to indexed locations.

• Allow indexing of file contents in non-indexed locations.

• Add encrypted files to the index.

You administer Windows 8.1 Enterprise client computers in your company network.

You change settings on a reference computer by using the Windows Firewall with Advanced Security tool. You want to apply the same settings to other computers.

You need to save the Windows Firewall with Advanced Security configuration settings from the reference computer. You also need to be able to import the configuration settings into a Group Policy object later.

What should you do?

• Run the netshadvfirewall export c:\settings.xrnl command.

• Run the netshadvfirewall export c:\settings.txt command.

• Run the netshadvfirewall export c:\settinqs.wfw command.

• Run the netsh firewall export c:\settings.xml command.

You administer Windows 8.1 Pro computers in your company network. A server named Server1 runs Windows Server 2012. Server1 allows incoming VPN and Remote Desktop connections.

A remote user requires access to files on Server1.

You need to prevent the user from downloading any files from Server1 to his local computer. Your solution must ensure that the user can read the files on Server1.

What should you do?

• Create a new VPN connection. Disable local drive mappings.

• Create a new Remote Desktop connection.

• Set the Local Computer policy to Disable drives redirection for Remote Desktop Services.

• Create a new Remote Desktop connection. Set the Local Computer policy to Disable clipboard redirection for Remote Desktop Services.

A company has 10 client computers that run Windows 8.1.

An employee updates a device driver on her computer and then restarts the computer. Windows does not start successfully. You start the computer in Safe Mode.

You need to identify the most recently installed driver and gather the maximum amount of information about the driver installation.

What should you do?

• In Device Manager, run a scan for hardware changes.

• In the Event Viewer console, display the Hardware Events log.

• In the Programs and Features Control Panel item, display the installed updates.

• Display the contents of the Windows\inf\setupapi.dev.log file.

A company has lab computers that run Windows 8.1. On all lab computers, Internet Explorer has the Display intranet sites in Compatibility View option enabled and the Download updated compatibility lists from Microsoft option disabled. All lab computers access only internal corporate websites.

A corporate website was designed for a previous version of Internet Explorer. When viewed on the lab computers, menus and images on the website are displayed out of place.

You need to ensure that all corporate websites display correctly on the lab computers.

What should you do?

• Enable the Display all websites in Compatibility View option.

• Manually add the corporate website to the compatibility view settings.

• Manually download an updated compatibility list from Microsoft.

• Disable the Display intranet sites in Compatibility View option.

You administer Windows 8.1 Pro computers in your company network. The computers are configured to allow remote connections. You attempt to create a Remote Desktop Connection to a computer named Computer1. You receive the following message:

”Remote Desktop can’t connect to the remote computer.”

You are able to ping Computer1. You discover that Remote Desktop Firewall rules are not present on Computer1.

You need to connect to Computer1 by using Remote Desktop.

Which PowerShell commands should you run on Computer1?

• New-NetFirewallRule -DisplayNameRdpTCPin -localPort 3389 -Protocol TCP

• Set-NetFirewallRule -Name RemoteSvcAdmin-In-TCP -Enabled True

• New-NetFirewallRule -DisplayNameRdpTCPout -localPort 3389 -Protocol TCP – Direction Out -Action Allow

• Set-NetFirewallRule -Name RemoteFwAdmin-In-TCP -Enabled True

A company has a client computer that runs Windows 8.1 with secure boot enabled. You install a third-party adapter with an Option ROM in the computer.

When you start the computer, it starts in the Windows Recovery Environment (Windows RE).

You need to ensure that the computer starts normally.

What should you do?

• Install a Trusted Platform Module (TPM) chip.

• Start the computer in Safe Mode. Then update the adapter drivers.

• Replace the third-party adapter with an adapter that is signed by a trusted Certificate Authority (CA).

• Create a self-signed certificate. Associate the certificate with the third-party adapter.

A company has an Active Directory Domain Services (AD DS) domain. The company has 100 client computers and tablets that run Windows 8.1. Each user has a unique local user account on each device he or she uses.

The company wants to simplify the logon process for atl users.

You have the following requirements:

Reduce the number of unique user accounts for each user.
Unify the initial Windows 8.1 theme across all Windows 8.1 devices.
Ensure that Windows Store apps maintain the last used state across all Windows 8.1 devices.

You need to configure an authentication method that meets the requirements.

Which authentication method should you configure?

• Pin

• Microsoft account

• Active Directory user account

• Picture password

You use a computer that has Windows 8.1 Pro installed.

Your personal files are stored in a storage pool that is distributed across multiple USB drives.

You need to configure a daily backup solution that meets the following requirements:

Automatically backs up all of your personal files that are located in the storage pool.
Automatically backs up operating system files.
Ensures that you can restore any file.

What should you do?

• Create a recovery drive.

• Turn on File History.

• Configure Windows 7 File Recovery.

• Configure system protection.

A computer that runs Windows 8.1 is configured with a 2 TB storage pool. The storage pool currently shows 1 TB of available space.

You try to save 100 MB of files to the storage drive. An error message states that the drive is full.

You need to make an additional 1 TB of space available in the storage pool.

What should you do?