David Rand
Quiz von , erstellt am more than 1 year ago

MCSA Digital Technologies Quiz am MCSA 70-410, erstellt von David Rand am 14/09/2016.

17
0
0
David Rand
Erstellt von David Rand vor mehr als 7 Jahre
Schließen

MCSA 70-410

Frage 1 von 10

1

You have a server named Server1 that runs Windows Server 2012 R2. Server 1 has the Hyper-V server role installed.
An iSCSI SAN is available on the network
Server1 hosts four virtual machines named VM1, VM2, VM3 , and VM4.
You create a LUN on the SAN to host the virtual hard drive files for the virtual machines.
You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being paused if the LUN runs out of disk space.
Which type of virtual hard disk should you create on the LUN?

Wähle eine der folgenden:

  • Dynamically expanding VHDX

  • Fixed-size VHDX

  • Fixed-Size VHD

  • Dynamically expanding VHD

Erklärung

Frage 2 von 10

1

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual 1.
On VM5, you install a network monitoring application named Monitor1
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell?

Wähle eine oder mehr der folgenden:

  • Get-VM “VM6” | Set-VMNetworkAdapter-lovWeight 1

  • Get-VM “VM5” | Set-VMNetworkAdapter-IovWeight –

  • Get-VM “VM5” | Set-VMNetworkAdapter-PortMirroring Source

  • Get-VM “VM6” | Set-VMNetworkAdapter-AllowTeaming On

  • Get-VM “VM6” | Set-VMNetworkAdapter-PortMirroring Destination

  • Get-VM “VM5” | Set-VMNetworkAdapter-AllowTeaming On

Erklärung

Frage 3 von 10

1

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has the virtual switches listed in the following table.
Virtual Switch name | Virtual switch type | Physical network adapter name
vSwitch1 External NIC1
vSwitch2 External NIC2

You create a virtual machine named VM1. VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2. You configure NIC teaming on VM1. You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.
What should you do on Server1?

Wähle eine der folgenden:

  • Run the Set-VmNetworkAdapter cmdlet

  • Add a new network adapter to VM1

  • Create a new virtual switch on Server1

  • Modify the properties of vSwitch1 and vSwitch2

Erklärung

Frage 4 von 10

1

Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contains several virtual machines that run Windows Server 2012 R2
You install the Network Load Balancing feature on the virtual machines
You need to configure the virtual machines to support Network Load Balancing (NLB)
Which virtual machine settings should you configure?

Wähle eine der folgenden:

  • DHCP guard

  • Port Mirroring

  • Router Guard

  • MAC address

Erklärung

Frage 5 von 10

1

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table.

Host bus adapter (HBA) name | Fibre Channel SAN name
HBA1 SAN1
HBA2 SAN2
HBA3 SAN1
HBA4 SAN2

You have a virtual machine named VM1.
You need to configure VM1 to connect to SAN1.
What should you do first?

Wähle eine der folgenden:

  • Create a virtual fibre channel SAN

  • Create a Hyper-V virtual switch

  • Add one HBA

  • Configure network adapter teaming

Erklärung

Frage 6 von 10

1

Your network contains an Active Directory domain named contoso.com. The domain constains a server named Server 1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
Setting | Configuration
Minimum RAM 2048 MB
Maximum RAM 4096 MB
Disk type Fixed Size
Disk size 100 GB

You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?

Wähle eine der folgenden:

  • Run the Resize-VHD cmdlet

  • Convert Disk1.vhd to a dynamically expanding disk

  • Shut down VM1

  • Run the Convert-VHD cmdlet

Erklärung

Frage 7 von 10

1

You have a print server named Server1 that runs Windows Server 2012 R2.
You discover that when there are many pending print jobs, the system drive occasionally runs out of free space.
You add a new hard disk to Server1. You create a new NTFS volume.
You need to prevent the print jobs from consuming disk space on the system volume.
What should you modify?

Wähle eine der folgenden:

  • A. The properties on the new volume

  • B. The properties of the Print Spooler service

  • C. The Print Server Properties

  • D. The properties of each shared printer

Erklärung

Frage 8 von 10

1

Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.

On a server named Corel, you perform a Server Core Installation of Windows Server 2012 R2. You join Corel to the adatum.com domain.

You need to ensure that you can use Event Viewer on Server1 to view the event logs on Corel.

What should you do on Corel?

Wähle eine der folgenden:

  • Run the Enable-NetFirewallRule cmdlet

  • Run the Disable-NetFirewallRule cmdlet

  • Install Windows Management Framework

  • Install Remote Server Administration Tools (RSAT)

Erklärung

Frage 9 von 10

1

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup.

On Server1 and Server2, you create a local user account named Admin1. You add the account to the local Administrators group. On both servers, Admin1 has the same password.

You log on to Server1 as Admin1. You open Computer Management and vol.connect to Server2. When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access Denied messages.

You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management.

What should you configure on Server2?

Wähle eine der folgenden:

  • From Server Manager, modify the Remote Management Setting

  • From Local Users and Groups, modify the membership of the Remote Management Users group.

  • From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule

  • From Registry Editor, configure the LocalAccountTokenFilterPolicy registry value

Erklärung

Frage 10 von 10

1

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

Server1 hosts four virtual machines named VM1, VM2, VM3 and VM4.

Server1 is configured as shown in the following table.

Hardware Component | Configuration
Processor Eight quad-core CPUs that have non-uniform memory access (NUMA)
Memory 32 GB of RAM
Disk Two local 4-TB disks
Network Eight network adapters VMQ-supported PCI-SIG-supported

You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS).

You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.

Which virtual machine setting should you configure for VM2?

Wähle eine der folgenden:

  • NUMA topology

  • Resource Control

  • Resource metering

  • Virtual Machine Chimney

  • The VLAD ID

  • Processor Compatibility

  • The startup order

  • Automatic Start Action

  • Integration Services

  • Port Mirroring

Erklärung

Vorherige
Antwort prüfen
Nächste