Examen AIX Administration 7

Beschreibung

Examen de Certificaciones
mauriciocartes92
Quiz von mauriciocartes92, aktualisiert more than 1 year ago
mauriciocartes92
Erstellt von mauriciocartes92 vor mehr als 8 Jahre
362
0

Zusammenfassung der Ressource

Frage 1

Frage
1. A system administrator suspects that a colleague rebooted their server the Previous evening. Which of the following commands will confirm this Suspicion?
Antworten
  • uptime
  • lastboot
  • reboot -l
  • bootinfo –t

Frage 2

Frage
Once the machine has been powered on, which of the following is the correct Way to reach the Systems Management Services menu on a PCI machine?
Antworten
  • Press the space-bar when the LED displays 262.
  • Turn the key to Service mode when the LED displays 200.
  • Choose SMS when the boot option menu appears on screen.
  • Press the appropriate function key once the keyboard has been enabled.

Frage 3

Frage
While attempting a preservation install, all of the hardware connections Appear to be correct. However, when trying to boot from CD-ROM, the Machine ends up in diagnostics. Which of the following is the most likely Cause of this problem?
Antworten
  • The battery on the machine is bad.
  • The root volume group is corrupt.
  • The low-level debugger is not enabled.
  • There is a hardware problem with the CD-ROM.

Frage 4

Frage
The marketing group within the Widget Company plans to implement a new database to house their demographic data. The administrator has requested a tape drive and an additional disk to support the installation of this new database. The IBM hardware engineer has connected the new equipment, and the machine has been rebooted. Which of the following commands should be used to verify the tape device is installed correctly?
Antworten
  • lspv
  • lsdev
  • lstape
  • lsdisk

Frage 5

Frage
The marketing group within the Widget Company plans to implement a new database, as in question one. The new tape drive appears to be installed and functioning correctly. However, while attempting to perform a mksysb utilizing the new drive, it fails. What would be the first recommended action to take to determine the cause of the failure?
Antworten
  • Replace the tape drive.
  • Run cfgmgr to reconfigure the tape device.
  • Check the error log for tape drive errors.
  • Use SMIT to change the compression attribute on the tape device.

Frage 6

Frage
A system administrator has just set up a new machine with two external hard disks in a SCSI chain. One is a 2.2 GB SE (single ended) disk, and the other is a 4.5 GB differential disk. The system administrator reboots the machine and notices that only the SE disk is available. Which of the following is the most likely cause?
Antworten
  • The SE disk is most likely experiencing hardware problems.
  • There is most likely a SCSI conflict between the two drives.
  • The SE and differential drives are on the same chain.
  • The differential disk is most likely experiencing hardware problems.

Frage 7

Frage
Which of the following commands can be used to determine the serial port settings?
Antworten
  • lscfg -vl ttyXX
  • ls -l /dev/ttyXX
  • lsattr -El ttyXX
  • lsdev -C |grep ttyXX

Frage 8

Frage
A machine has a bootlist that is set for network booting. In attempting to access SMS menus to change the bootlist to the local disk, it is discovered that someone has set an SMS supervisory password, and the password is not recorded. Which of the following actions will allow the system administrator to gain access to the SMS menus?
Antworten
  • Boot from AIX installation media, then reinstall SMS.
  • Boot from AIX installation media, then reset the supervisory password.
  • Call IBM and ask for the over-ride password based on the serial number.
  • Remove the battery from the system for at least one minute. Replace the battery and then reboot.

Frage 9

Frage
An AIX installation has just completed. Maintenance Level 6 has been applied to the BOS. Which command will show all installed maintenance levels concurrently?
Antworten
  • oslevel -a
  • lslpp -l | grep AIX
  • smitty show_apar_stat
  • instfix -i | grep ML

Frage 10

Frage
How would an administrator verify that the system has all required prerequisite fixes prior to installing a software fix?
Antworten
  • Use the lsprereq command.
  • Use installp with the preview option.
  • View the .toc file in the root directory.
  • Use the inutoc command to update the .toc file.

Frage 11

Frage
It has been determined that fix IX39714 needs to be applied to a server as soon as possible. How can this fix be obtained if the system has Internet connectivity?
Antworten
  • Use the fixdist utility to download the fix.
  • FTP the fix from fixes.pseries.ibm.com.
  • Send an E-mail to fixes.pseries.ibm.com with IX39714 in the subject line.
  • Use the Web-Based System Manager to download the fix.

Frage 12

Frage
During the first reboot after the AIX 5L Version 5.1 operating system installation process has completed, what is the first screen the administrator will see?
Antworten
  • Login prompt
  • Root shell prompt
  • Installation Assistant
  • Configuration Assistant

Frage 13

Frage
Which of the following commands lists the current fix level of the bos.net.nfs.client fileset?
Antworten
  • lsfs bos.net.nfs.client
  • lslpp -l bos.net.nfs.client
  • lppchk -l bos.net.nfs.client
  • installp -ver bos.net.nfs.client

Frage 14

Frage
Which of the following commands can be used to verify the success of an operating system upgrade?
Antworten
  • oslevel
  • lslpp -h bos.obj
  • what_fileset -v
  • lsattr -Vl bos.rte

Frage 15

Frage
If bos.up displays on your machine as being at 4.3.1.7, what is the modification level?
Antworten
  • 1
  • 3
  • 4
  • 7

Frage 16

Frage
A system administrator wishes to determine if a newly configured tape drive is correctly added to the ODM database. Which command would the administrator use?
Antworten
  • odmshow
  • odmadd
  • odmget
  • odcreate

Frage 17

Frage
The ODM is located in:
Antworten
  • /etc/objrepos
  • /usr/lib/objrepos
  • /usr/share/lib/objrepos
  • All of the above

Frage 18

Frage
While using the SMIT install menus to install an LPP, the response yes has been selected for the option: EXTEND file systems if space needed. After successfully installing the LPP, the /usr file system appears to be unnecessarily large. Which of the following actions can be performed to reduce the size of the /usr file system?
Antworten
  • Backup, unmount, remove, recreate and restore the file system.
  • Unmount, run defragfs /usr and the reducefs -size XXX /usr commands.
  • Boot from mksysb tape and follow the procedure to reduce the file system.
  • Update /etc/filesystems with the desired size for /usr and reboot the system.

Frage 19

Frage
A system administrator's daily monitoring has revealed a failing disk drive. While examining the system, the administrator identified an unallocated drive. Which of the following actions should be performed first to migrate the data from the failing drive to the unallocated drive?
Antworten
  • Migrate logical volumes to the new drive.
  • Add the unallocated drive to the volume group.
  • Create a copy of the file systems to the new drive.
  • Create a mirror of the logical volumes to the new drive.

Frage 20

Frage
Due to high I/O volume to several file systems, the system administrator has decided to create a second JFS log volume to balance the I/O requests. After creating the logical volume to serve as the JFS log, what must be done to make the jfslog available for use?
Antworten
  • Use the chvg command to enable the JFS log volume.
  • Use the chjfs command to enable the JFS log volume.
  • Use the logform command to format the logical volume.
  • Edit /etc/filesystems and add the logical volume name.

Frage 21

Frage
A system has been recovered from a hard disk failure and the failed disk has been replaced with a new unformatted one. When the system administrator varies on the volume group, an error message about a missing or unavailable disk matches the one the system administrator replaced. Which of the following commands will eliminate this error message?
Antworten
  • cfgmgr
  • export VGName
  • mkdev -1 hdisk3
  • reducevg -df VGName PVID

Frage 22

Frage
The system administrator has created 20 file systems that are set to mount each time the system boots. Which of the following is the quickest method to mount these file systems?
Antworten
  • mount -a
  • Reboot the system.
  • /usr/lib/methods/cfgfs
  • Mount each individual file system.

Frage 23

Frage
To increase the size of a file system, the system administrator must:
Antworten
  • Unmount the file system.
  • Boot the system into single user mode.
  • Have enough free physical partitions within the volume group.
  • Back up the file system, change the size, and restore the file system.

Frage 24

Frage
To decrease the size of the /home file system, the system administrator must:
Antworten
  • Use the chfs command.
  • Use the reducefs command.
  • Run the defragfs command and then use the reducefs command.
  • Back up, delete, redefine, and restore the file system.

Frage 25

Frage
What is the correct sequence of steps to mirror a volume group? 1. extendvg 2. mirroring 3. syncvg 4. set quorum 5. mkfscopy 6. reorgvg
Antworten
  • 1, 2, 3, 4
  • 1, 5 , 3, 4
  • 1, 2, 4, 6
  • 6, 5, 4, 3

Frage 26

Frage
Several error log entries indicate that hdisk5 is going bad. Before it completely fails, the system administrator decides to copy the information from that disk to the other five hard disks in that volume group. Which of the following commands should be used?
Antworten
  • copyfs
  • movelv
  • populatefs
  • migratepv

Frage 27

Frage
A system has one internal disk drive (hdisk0) and one external disk drive (hdisk1). – hdisk0 is a 2.2 GB SCSI/2 Fastwide disk drive and contains a volume group called rootvg. – hdisk1 is a 4.5 GB SSA drive and contains a volume group called appsvg. – The external SSA drive has over 3.0 GB of free space. The system administrator would like to make a mirrored copy of a 500 MB logical volume that currently is on hdisk0. What would prohibit the system administrator from establishing a mirrored copy between the internal and external disk drives?
Antworten
  • The disks are not the same physical size.
  • The disks are not within the same volume group.
  • AIX does not support mirroring logical volume mirroring.
  • The disks are not the same drive type (for example, SSA verses SCSI/2).

Frage 28

Frage
Which of the following commands displays the status of a physical volume (hdisk1) before adding it to a volume group called cdvg?
Antworten
  • lsvg cdvg
  • chvg cdvg
  • lspv hdisk1
  • chpv hdisk1

Frage 29

Frage
What step must be taken prior to removing a file system?
Antworten
  • Unmount the file system.
  • Remove the logical volume.
  • Delete the data from the file system.
  • Remove the NFS export for the file system.

Frage 30

Frage
The system administrator realizes that paging space, paging12, must first be removed from hdisk12. Which of the following is the correct sequence of events for an older AIX system?
Antworten
  • chps -an paging12, reboot, rmps paging12
  • swapoff paging12, rmps paging12
  • swapoff paging12, reboot, rmps paging12
  • chps -an paging12, swapoff paging12, rmps paging12

Frage 31

Frage
A customer would like to remove an unneeded, but active, paging space called paging00. What is proper sequence of steps to accomplish this?
Antworten
  • Remove the paging space by using the rmps command and reboot the system.
  • Disable the paging space by using the chps command, reboot the system, and remove the paging00 logical volume by using the rmps command.
  • Disable the paging space by using the chps command, remove the paging00 logical volume by using the rmps command, and reboot the system.
  • Disable the paging space by using the chps command, reboot the system, and remove the paging00 logical volume by using the rmlv command.

Frage 32

Frage
A system administrator would like to list all of the paging spaces residing on the server. What is the correct syntax of the command to accomplish this?
Antworten
  • lsps -a
  • lsps -s
  • lsps -l
  • lsps -all

Frage 33

Frage
What is the purpose of the -i flag with the mksysb command?
Antworten
  • It creates/updates the /.fsdata.
  • It reports the size of a file in bytes.
  • It creates a bootable system backup.
  • It creates or updates the /image.data file.

Frage 34

Frage
The administrator of the Widget company has decided that doing full backups of the /apps directory each night is taking much more time than originally assumed and that incrementals should be done during the week with one Full backup each Saturday night. Which file if present can be used to manage this during the week?
Antworten
  • /last_full_backup
  • /etc/last_full_backup
  • /etc/incremental_dump_dates
  • /etc/incremental_file_backup

Frage 35

Frage
What is the purpose of the mkszfile command?
Antworten
  • It creates or updates the /image.data file.
  • It reports the size of a file in bytes.
  • It creates a bootable system backup.
  • It creates/updates the /.fsdata.

Frage 36

Frage
After creating a tar archive on a tape and verifying that the backup was successful, a system administrator then inserts the tape into another machine to access the data and receives the following error: "Media Read Error - I/O Error" Which of the following is the most likely cause of the error?
Antworten
  • The blocksize or density setting is incorrect.
  • There is a lack of disk space in the root file system.
  • The tape is not read/writable.
  • There is a bad cable on the tape drive.

Frage 37

Frage
A system administrator would like to restore the third image from a mksysb tape. To position the tape to the correct image, which of the following commands should be run?
Antworten
  • lsattr
  • tctl
  • ffwd
  • chdev

Frage 38

Frage
The finance group at the Widget Company has just approved a new financial package that runs on an RS/6000. They will be converting their old data to the new system. Currently, they have 10 GB of data but will be growing to 18 GB with the new system because they want to maintain one year of history online. The new system they have ordered is an F50 with 128 MB of RAM, an SSA card, two 9.1 GB SSA drives, and a single FDDI card. What would be the best addition to this system for redundancy? 1. One SSA card 2. Two 9.1 GB SSA disks 3. Error correcting RAM 4. Two additional processors
Antworten
  • 3 and 1
  • 4 and 1
  • 4 and 2
  • 1 and 2

Frage 39

Frage
The system administrator would like to log messages related to user login failures to a file. How could this be accomplished?
Antworten
  • Issue the command: alog -f /etc/security/failedlogin -q
  • Modify the /etc/security/login to add an auth_method for logging.
  • Add a line to the /etc/syslog.conf file to capture this information.
  • Set log=true in the default stanza in the /etc/security/user file.

Frage 40

Frage
A system administrator would like to collect a log file of su activity on all hosts across a network. The central logfile will reside on host mars. The syslog daemon is already operational on host mars. Which of the following is the first step in accomplishing this task?
Antworten
  • Edit the /var/adm/sulog file on all hosts except mars adding the line: remote:mars
  • Edit the /etc/syslog.conf file on all hosts except mars adding the line: auth.debug @mars
  • Edit the /var/adm/syslog file on all hosts except mars adding the line: sulog = mars
  • Edit the /etc/security/user file on all hosts except mars adding the following line to the default stanza: sulog = mars

Frage 41

Frage
An overwrite installation has just been completed to bring the machine up to the latest AIX version. Which of the following is the next step to take in order to enable operation of skulker?
Antworten
  • Run the command: startsrc -s skulker
  • Run the command: chitab "skulker:2:wait:/etc/rc.skulker"
  • Remove the comment from the skulker entry of the root crontab
  • Remove the comment from the skulker entry in the inetd.conf and refresh inetd.

Frage 42

Frage
Which of the following actions allow a System Administrator to configure anonymous FTP?
Antworten
  • smit ftp
  • /usr/samples/tcpip/anon.ftp
  • startsrc -s ftp -a anonymous
  • add the FTP anonymous user using smit

Frage 43

Frage
A System Administrator is given only one Ethernet network card (en0) in a system, with an IP address of 192.168.1.3. A user wants to host two different initial home pages on the Web server. The System Administrator has verified that the Web server does support multiple IP Addresses. To add another IP address to the already configured interface, which of the following choices should be selected?
Antworten
  • smitty chgenet
  • smitty add_interface
  • ifconfig en0 newipaddress netmask netmask alias
  • This task cannot be accomplished without adding a new Ethernet interface.

Frage 44

Frage
When a RPC (remote procedural call) server starts up, it registers itself with which of the following daemons?
Antworten
  • yp daemons
  • nfs daemons
  • inetd daemons
  • portmap daemon

Frage 45

Frage
Which of the following actions will allow the system administrator to stop and restart the TCP/IP daemons manually?
Antworten
  • Use the netstat command.
  • Use the SRC utility to stop and restart.
  • Use the netconfig utility menu.
  • Issue the rmdev command on the appropriate network adapter.

Frage 46

Frage
Two Web servers need to be configured on a single machine that has only one network interface. Each Web server needs to have its own unique IP address. How should an administrator accomplish this?
Antworten
  • Use the smitty alias command
  • Add it in /etc/defaults
  • Use the newaliases 192.127.10.10 command
  • Use the ifconfig en0 192.127.10.10 alias command

Frage 47

Frage
An AIX system administrator decides to experiment with NFS. She exports /home and /var, two file systems from a system called pluto. The system administrator now is on system called mars, another AIX machine on the same subnet as pluto. She now wishes to mount the exported file systems from pluto onto mars. Which of the following commands will she use to view the export list of 'pluto'?
Antworten
  • exportlist pluto
  • rpcinfo -p pluto
  • showmount -e mars
  • showmount -e pluto

Frage 48

Frage
A system administrator has been working on a project for the last couple of months that requires writing different scripts on Server A. These scripts, which have been run nightly, have been collecting data within log files in a journaled file system called /project22. The system administrator would now like to access this JFS from a remote server called Server B. The system administrator has issued the command lssrc -g nfs and discovered that the daemons are inoperative on Server A. Which of the following actions should be performed to correct this situation?
Antworten
  • Run the nfs.start command.
  • Run the startsrc -g nfs command.
  • Run the refresh -s nfsd command.
  • Log out and then log back into the system.

Frage 49

Frage
The same scenario from question one still applies. Which of the following actions should be performed by the system administrator to give Server B access to Server A's file system?
Antworten
  • Run the chfs command on Server A.
  • Run the chfs command on Server B.
  • Run the exportfs command on Server A.
  • Run the exportfs command on Server B.

Frage 50

Frage
The finance department at the Widget Company needs a larger server. The current server has 40 GB of hard drive space, two processors and 2 GB of memory. The application is a fully multi-threaded process and is very I/O intensive. What configuration should the company purchase to fix current problems and plan for future expansion?
Antworten
  • One 60 GB SCSI hard disk, 4 processors, and 2 GB of memory.
  • Two 20 GB SSA hard disks, 4 processors, and 4 GB of memory.
  • Two 20 GB SCSI hard disks, 2 processors, and 8 GB of memory.
  • Three 20 GB SSA hard disks, 4 processors, and 2 GB of memory.

Frage 51

Frage
The Widget Company is trying to implement disaster recovery procedures and techniques. They currently have two daily backups taken of all data. In the event that they need to restore data to another machine, what type of machine would be ideal?
Antworten
  • A slightly slower machine of the same type.
  • An exact duplicate of the original machine.
  • A slightly slower machine of the same type with less processors.
  • An exact duplicate of the original machine with less processors.

Frage 52

Frage
A system administrator is experiencing performance problems and runs the vmstat command. The output of vmstat is shown in the following exhibit. procs memory page faults cpu ----- ----------- ------------------------ ------------ ----------- r b avm fre re pi po fr sr cy in sy cs us sy id wa 2 0 22534 1465 0 0 0 0 0 0 238 903 239 77 23 0 0 2 0 22534 1445 0 0 0 0 0 0 209 1142 205 72 28 0 0 2 0 22534 1426 0 0 0 0 0 0 189 1220 212 74 26 0 0 3 0 22534 1410 0 0 0 0 0 0 255 1704 268 70 30 0 0 2 1 22557 1365 0 0 0 0 0 0 383 977 216 72 28 0 0 What can be concluded from this output?
Antworten
  • The machine is CPU bound.
  • The machine needs memory optimized.
  • the machine needs a FDDI card installed.
  • A user program is causing unnecessary paging.

Frage 53

Frage
A system administrator runs the vmstat command. The output of vmstat is shown in the following exhibit (using a 15 minute interval). kthr memory page faults cpu ----- ----------- ------------------------ ------------ ----------- r b avm fre re pi po fr sr cy in sy cs us sy id wa 2 0 9200 11027 0 0 0 0 0 0 103 52 14 14 16 0 69 2 1 9200 11027 0 0 0 0 0 0 207 251 29 12 11 0 67 3 1 9200 11027 0 0 0 0 0 0 207 120 29 9 11 0 80 5 1 9200 11027 0 0 0 0 0 0 206 120 29 13 5 0 79 4 1 9200 11027 0 0 0 0 0 0 207 131 32 9 8 0 72 Based on this output, what is the average CPU idle time as a percentage?
Antworten
  • 45.5
  • 75.3
  • 44.04
  • 73.4

Frage 54

Frage
A user is able to get a login prompt for the server but gets a failed login error message when trying to login with an ID. Which of the following is the most likely cause of this problem?
Antworten
  • the hard drive is bad.
  • The /home file system is full.
  • The server is low on paging space.
  • The user has entered an invalid ID or password.

Frage 55

Frage
Which of the following files contains UID, home directory, and shell information?
Antworten
  • /etc/passwd
  • /etc/security/user
  • /etc/security/environ
  • /etc/security/passwd

Frage 56

Frage
A customer has cloned a machine using mksysb. The source machine contained a graphics adaptor and display and was running Xwindows. The target machine has an IBM 3151 terminal and no graphics capability. The customer states that they are seeing the following message repeatedly scroll across the login screen. ******************************************************* * Starting Desktop Login on display :0÷ * * Wait for the Desktop Login screen before logging in. * ******************************************************* To prevent this message from appearing, which of the following actions should be performed?
Antworten
  • Run the cdecfg -disable command.
  • Run the startx -no command and reboot.
  • Run the dtconfig -d command and reboot.
  • Remove the X=start line from the /etc/security/login.cfg file and reboot.

Frage 57

Frage
After completing the installation of the Base Operating System on one of the servers, the system administrator would like for all users who telnet into this machine to see a specific message each time they successfully log in. Which file should be edited to provide this message?
Antworten
  • /etc/motd
  • /etc/profile
  • /etc/environment
  • /etc/security/login.cfg

Frage 58

Frage
A marketing manager would like her shell prompt to reflect the directory she is in so that if she needs to remove a file, she will be sure to be in the proper directory. Which of the following environment variables can be set to accomplish this?
Antworten
  • PS1
  • PATH
  • DISPLAY
  • LOCPATH

Frage 59

Frage
The Widget Company has installed a new laser printer on their network. The RS/6000 has been configured to print to that printer using the pcl queue. A print job was submitted to the pcl queue and was running until the printer ran out of paper. The printer was offline for 30 minutes before the paper was added. What needs to be done to continue the print job?
Antworten
  • enable pcl
  • startsrc -s lpd
  • refresh -s lpd
  • resubmit the job

Frage 60

Frage
To list the print job 120 on printer lineprinter, which command would you use?
Antworten
  • qchk -P lineprinter
  • qcan 120
  • ps lineprinter
  • lsdev lineprinter | grep 120

Frage 61

Frage
To print the file /etc/host to the printer lineprinter, which command would you use?
Antworten
  • lpr /etc/hosts -P lineprinter
  • lpstat lineprinter
  • lprm /etc/hosts -P lineprinter
  • print /etc/hosts

Frage 62

Frage
A Company would like to create an e-mail alias on an AIX workstation that will forward e-mail to a user on another workstation for collection of data. The system administrator would like to add this entry to the /etc/aliases file. Which of the following actions should be performed in order for the change to take affect?
Antworten
  • Reboot the workstation.
  • Run the mailq command.
  • Stop and start TCP/IP.
  • Use the sendmail command.

Frage 63

Frage
A system administrator wants to process a mail queue after every 45 minutes. Which of the following commands should be used if the change must take effect immediately and be permanent?
Antworten
  • sendmail -q45d
  • sendmail -q45h and also edit /etc/rc.tcpip to change qpi=45h
  • sendmail -q45 and also edit /etc/rc.tcpip to change qpi=45m
  • sendmail -q45

Frage 64

Frage
All mail sent to root on system mars needs to be redirected to user administrator on system earth. Prior to running the newaliases command, which command should be run to accomplish this goal?
Antworten
  • On system earth, run the command: echo "mars: earth" >> /etc/hosts
  • On system mars, run the command: echo "root:admin@earth" >> /etc/aliases
  • On system mars, run the command: echo "root:admin@earth" >> /etc/sendmail.cf
  • On system earth, run the command: echo "root:admin@earth" >> /etc/sendmail.cf

Frage 65

Frage
By installing the Documentation Search Services client fileset, the following will be made available to your AIX Version 4.3 system:
Antworten
  • CDE icon
  • Web browser
  • docsearch command and CDE icon
  • info command and CDE icon

Frage 66

Frage
From a forms-capable Web browser, the URL used to access the online documentation server on an AIX Version 4.3 system is:
Antworten
  • http://server_name[:port_number]/cgi-bin/ds_form
  • http://server_name[:port_number]/cgi-bin/docsearch
  • http://server_name[:port_number]/cgi-bin/info
  • http://server_name[:port_number]/cgi-bin/man

Frage 67

Frage
A system administrator uses the startsrc command to start the font server and gets the following message: subsystem not on file Which of the following is the proper way to make this subsystem available?
Antworten
  • Run the definesrc -s xfs command.
  • Run the xfsconf script and then run startsrc -s xfs command.
  • The font server can not be controlled by the system resource //controller.
  • Run the startsrc -s xfs command and then refresh -s inetd command.
Zusammenfassung anzeigen Zusammenfassung ausblenden

ähnlicher Inhalt

prueba 1
ANGELA HIDALGO
ESTUDIANTE
Omar valeta
ELEMENTOS Y CONCEPTOS FUNDAMENTALES trabajo final
supervisortropi
EXAM TIME FICHAS
Daniela Velasque5264
Tema 1. Introducción a las técnicas de investigación social
Vicky Uned
ELEMENTOS Y CONCEPTOS FUNDAMENTALES
Fernando González
ANTECEDENTES DEL DESARROLLO ECONOMICO DE MEXICO (1876- 1940)
jamoreno
RESPONSABILIDAD SOCIAL EMPRESARIAL
helmerhans1123
EMPRESA
jimmyavilap73