Frage 1
Frage
When "Hydrogen Control" is specified for a manual metal arc welding project the electrode would normally be:
Antworten
-
Cellulosic
-
Iron Oxide
-
Acid
-
Basic
Frage 2
Frage
When "Hydrogen Control" is specified for a manual metal arc welding project the electrode would normally be:
Antworten
-
Cellulosic
-
Iron Oxide
-
Acid
-
Basic
Frage 3
Frage
You would certainly recognize a hydrogen controlled flux electrode from its:
Antworten
-
Colour
-
Length
-
Trade Name
-
BS639/AWS Code Letter
Frage 4
Frage
You notice manual metal arc electrodes are being, stripped of flux, are being used as a filler metal wire for TIG welding. You would object because:
Frage 5
Frage
For open site manual metal welding the following equipment is available. Which would you choose for safe site working?
Antworten
-
Single operator transformer
-
multi-operator transformer
-
AC/DC composition power unit
-
Diesel engine driven motor generator
Frage 6
Frage
In MMA welding what parameter is used for control of penetration into the base metal?
Frage 7
Frage
What type of characteristic is required for manual welding?
Antworten
-
Constant voltage
-
flat characteristic
-
Drooping characteristic
-
DC generator
Frage 8
Frage
The weld metal deposit for MMA electrodes achieves its mechanical strength through:
Frage 9
Frage
What constituent is needed in the coating of an electrode to prevent the formation of porosity in the welding of a rimming steel?
Antworten
-
Iron powders
-
Calcium florid
-
Silicon
-
calcium carbonate
Frage 10
Frage
Cellulose electrodes are often used when welding the root pass of pipes in the field because:
Antworten
-
Hydrogen control is needed
-
There are iron powders in the electrode
-
Higher arc voltage can be obtained
-
Shorter arc length can be obtained
Frage 11
Frage
MMA electrodes can be grouped into three main types:
Antworten
-
Basic, cellulose and rutile
-
Neutral, cellulose and rutile
-
None of the above
Frage 12
Frage
Movement of the arc in MMA welding by magnetic forces is called:
Antworten
-
Arc deviation
-
Arc misalignment
-
Arc blow
-
Arc eye
Frage 13
Frage
Which of the following coatings is associated with welding?
Antworten
-
Rutile
-
Cellulose
-
Basic
-
Oxodizing
-
A,B,C
Frage 14
Frage
The voltage necessary to maintain an arc during metal arc welding is termed:
Antworten
-
Main supply voltage
-
arc current
-
Arc Voltage
-
Open circuit voltage
Frage 15
Frage
When MMA welding low carbon steel which electrode which electrode will give the greatest deposition rate?
Antworten
-
Hydrogen controlled
-
cellulose
-
rutile
-
Iron powder
Frage 16
Frage
Hydrogen controlled electrodes were developed principally for:
Antworten
-
The prevention of porosity
-
The prevention of cracking
-
The enhancement of arc voltage
-
There ease of arc starting
Frage 17
Frage
A basic electrode would normally:
Antworten
-
Have superior mechanical properties
-
Require baking before use
-
Not to be used on low carbon steels
-
Both A and B
Frage 18
Frage
MMA welding of low alloy steels is more likely to be performed with:
Frage 19
Frage
When manual metal arc welding low carbon steel, which electrode covering will give the greatest degree of penetration?
Antworten
-
Iron powder
-
Rutile
-
Cellulose
-
Low hydrogen
Frage 20
Frage
MMA welds made with damaged electrode coatings are subject to:
Antworten
-
Porosity
-
Undercut
-
Excessive penetration
-
Excessive bead hieght