manuel.cortes
Quiz by , created more than 1 year ago

Quiz on AVAYA 6002, created by manuel.cortes on 10/01/2013.

964
2
0
No tags specified
manuel.cortes
Created by manuel.cortes over 10 years ago
Close

AVAYA 6002

Question 1 of 71

1

When troubleshooting a system fault, if the web interface or SAT are unavailable, which method should
be used?

Select one of the following:

  • SAL

  • TTY2

  • CLI

  • MODEM

Explanation

Question 2 of 71

1

Which two series support RAID 5 configuration for CM6.0? (Choose two)

Select one or more of the following:

  • A. S8730 Server with 8 GB RAM

  • B. S8800 Server with 12 GB RAM

  • C. S8510 Server with 8 GB RAM

  • D. S8300D Server with 8 GB RAM

Explanation

Question 3 of 71

1

Hunt group number 99, with group extension 4199, is administered for messaging.
Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?

Select one of the following:

  • A. Shoe tracelog huntgroup 4199

  • B. View logs real time huntgroup 99

  • C. Display real time logs hunt group 99

  • D. List trace hunt-group 4199

Explanation

Question 4 of 71

1

A customer needs to set up SIP integration on Communication Manager Messaging Application 6.0
What are three pieces of information that are needed to meet this requirement? (Choose three)

Select one or more of the following:

  • A. Signaling group number

  • B. SIP domain

  • C. Transport Method

  • D. Extension length

  • E. Hunt Group number

Explanation

Question 5 of 71

1

Which three are tests that can be performed to Verify a communication manager Messaging 6.0
application is working properly? (Choose three)

Select one or more of the following:

  • A. Verify the hunt group status

  • B. Check the messaging port status using the display port command

  • C. Call the messaging Hunt Group

  • D. Check the messaging port status using the status port command

  • E. Perform message waiting indication test

Explanation

Question 6 of 71

1

On a media gateway G450, which slots are permitted for the MM 342?

Select one of the following:

  • A. V1 and V2

  • B. V6 and V6

  • C. V3 and V8

  • D. V5 and V7

Explanation

Question 7 of 71

1

A customer is planning to upgrade from CM 5X to CM 6.0 an existing 8510 server.
What is the total minimum memory requirement for this upgrade?

Select one of the following:

  • A. 4 GB RAM

  • B. 8 GB RAM

  • C. 12 GB RAM

  • D. 16 GB RAM

  • E.NINGUNA DE LAS ANTERIORES

Explanation

Question 8 of 71

1

Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?

Select one of the following:

  • A. Communication manager Web interface

  • B. Console domain Server Management Path management

  • C. Console domain Server Management Platform Upgrade

  • D. Console domain Virtual Machine Management

Explanation

Question 9 of 71

1

Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?

Select one of the following:

  • A. Communication manager Web interface

  • B. Console domain Server Management Path management

  • C. Console domain Server Management Platform Upgrade

  • D. Console domain Virtual Machine Management

Explanation

Question 10 of 71

1

Which three statements about CM_Duplex CM 6.0 are true?

Select one or more of the following:

  • A. Software duplication is available, but hardware duplication is not available.

  • B. The S8510 server is not used for duplication

  • C. Server duplication is configured via ""Failover"" option on CDROMs web interface"

  • D. S8730 with DAL 2 card does not support server duplication in CM 6.0.

  • E. The CM duplex template supports CMM

Explanation

Question 11 of 71

1

Which gateway command resets the Gateway back to factory default?

Select one of the following:

  • A. Reset

  • B. Restart

  • C. Softboot

  • D. Nvram init

Explanation

Question 12 of 71

1

A technician wants to test and see if the voice channel between two IP phones
Which command in site administration terminal (SAT) can be used to determine?

Select one of the following:

  • A. Status station

  • B. Status shuffling

  • C. List station

  • D. Test station

Explanation

Question 13 of 71

1

Which Ethernet port on S8800 server is for server duplication?

Select one of the following:

  • A. ETH0

  • B. ETH1

  • C. ETH2

  • D. ETH3

Explanation

Question 14 of 71

1

Which three commands are port of Avaya Aura CM_survRemote_Embed templates?
(Choose three)

Select one or more of the following:

  • A. Utility services

  • B. CM 6.0

  • C. Session manager

  • D. CMM 6.0

  • E. AES 6.0

Explanation

Question 15 of 71

1

A technician is planning to support to upgrade an Avaya communication Manager system to release 6.0
from Release 5.2
Which two tasks must be performed during the upgrade procedure? (Choose two)

Select one of the following:

  • A. The S8700-series servers must be displayed by S8800 servers.

  • B. All G350 gateways must replaced by S8800 servers.

  • C. The survivable remote servers must be upgraded by Release 6.0

  • D. The survivable Remote servers can stay at Release 5.2

Explanation

Question 16 of 71

1

In the navigation pane, what are the steps to create a test mailbox on the Communication manager
messaging 6.0 Application?

Select one of the following:

  • A. Select messaging administration, then Subscribe Management, and then click Add or edit.

  • B. Select messaging administration, the click new.

  • C. Select messaging administration, Select messaging administration, and then click add.

  • D. Select Forms control, and then at the command line run then add subscribe command.

Explanation

Question 17 of 71

1

When configuring a G450 Media gateway, which two port settings must be set? (Choose two)

Select one of the following:

  • A. FTP Server

  • B. 100 MB port speed

  • C. Auto-negotiation enabled

  • D. Full Duplex

Explanation

Question 18 of 71

1

A switch administrator wants to busyout trunk 530for maintenance and administration work however,
there is one call active on port 5 of the trunk
Which command should be extended from SAT terminal to find out IP addresses and port of the near-end
and far-end node of the auto connection?

Select one of the following:

  • A. Status trunk 53/5

  • B. List trace port 53/5

  • C. Display trunk 53/5

  • D. Display trunk statistics 53/5

  • E. Status port 53/5

Explanation

Question 19 of 71

1

Which three objects can be downloaded from the product license delivery system (PLDS)?
(Choose three)

Select one of the following:

  • A. Authentication file

  • B. Patches

  • C. Firmware updates

  • D. PuTTY

  • E. Communication manager templates

Explanation

Question 20 of 71

1

Which two statements describe the new procedures that a customer can use to directly and permanently
turn ON or OFF licensed features in CM 6.0? (Choose two)

Select one or more of the following:

  • A. Customers can turn features ON or OFF using the change system parameters customer- options
    command on the system access terminal (SAT).

  • B. Customers can turn features ON or OFF using the system management interface features
    administration page.

  • C. Customers can PDLS directly to turn futures ON or OFF and then download and install a new license
    file with the updated features.

  • D. Customers can turn features ON or OFF using the WebLM server and the system platform
    management Console

Explanation

Question 21 of 71

1

Which statement describes the action to assure the CM_SurvRemoteEmbeded template was installed
correctly?

Select one of the following:

  • A. From a browser, using the communication manager IP address, successfully log into the
    communication manager system management.

  • B. From a browser logged into communication Manager, Select administration > server (Maintenance)>
    server>Process Status. Click on view.

  • C. From a browser logged into the system Management console verify cm, bsm, and utility_server and
    application status is running

  • D. When monitoring the template installation workflow status, verify the message. ""Wizard completed"
    "successfully"" displays."

Explanation

Question 22 of 71

1

Which three statements about when communication manager release 6.0 is deployed as a feature server
are true? (Choose three)

Select one or more of the following:

  • A. It supports G450/G430 gateways.

  • B. It supports Analog trunks.

  • C. It supports SIP telephones.

  • D. It supports SIP trunks.

  • E. It supports Digital trunks.

Explanation

Question 23 of 71

1

When using the Avaya Site administrator CEDI interface, which command would be used to check the
configuration of telephone set with the extension of 1000?

Select one of the following:

  • A. Print station 1000

  • B. Display station 1000

  • C. Show station 1000

  • D. View station 1000

Explanation

Question 24 of 71

1

Which three statements are true for a configuration that consists of Duplicated S8800 main servers with a
duplicated port network and is a survivable core? (Choose three)

Select one or more of the following:

  • A. Software duplication exists between the two main S8800 servers.

  • B. The two main servers have duplication IPSls

  • C. Hardware Duplication exists between the two main S8800 servers.

  • D. The main servers share a single control network

  • E. All Clam media and Medpro cards must be in a one subnet

Explanation

Question 25 of 71

1

A technician has installed pair or duplication S8800 servers with IPSI duplication.
Which two procedures indicate that the duplicate IPSIs are both operated? (Choose two)

Select one or more of the following:

  • A. The enable operation of IPSI Duplication field on the display system-parameter duplication form is set
    to y.

  • B. IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is flashing.

  • C. Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the result
    column.

  • D. A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns success
    for the active IPSI and failure for the standby IPSI.

Explanation

Question 26 of 71

1

What are the recommended CLAN and MEDPRO port settings?

Select one of the following:

  • A. 10Mbps half duplex

  • B. 1000Mbps full duplex

  • C. 100Mbps full duplex

  • D. 100Mbps half duplex

Explanation

Question 27 of 71

1

Which two statements are true regarding a media gateway full back (recovery) to main (primary) servers?
(Choose two)

Select one or more of the following:

  • A. All active (stable) Ip calls on the media gateway drop when the media gateway falls back from the
    survivable remote server to the main server.

  • B. The list survivable-processor command can be used to confirm that the remote Survivable server is
    registered to the main server and that the remote survivable server is no longer active.

  • C. When the main server recovers it issues registration requests to all the media gateways in the network.

  • D. Executing the status media-gateways command from the main server will show which media gateways
    are registered with the main server.

Explanation

Question 28 of 71

1

To confirm that a survivable server is currently registered to the main CM servers, using the SAT.
Which command should be entered

Select one of the following:

  • A. Status ess clusters

  • B. Display survivable-processors

  • C. Status ess port-networks

  • D. Status survivable-processors

Explanation

Question 29 of 71

1

A customer wants to enable audio encryption for Ip phone calls, but the potion is not available on any
IP-codec-set.
Which procedure must be followed to obtain this feature?

Select one of the following:

  • A. From the SAT, type change system-parameter customer-options. Find the media Encryption over IP
    field, and set the option to Y. Save the change

  • B. From the SMI Feature administration page, find the media Encryption over IP field Set the option to Y.
    save the changes

  • C. From the system platform WebLM page. Find the media Encryption over IP field set the option to Y.
    Save the changes.

  • D. From the Aura System Manager's Feature Server Administration page. Find the media encryption over
    IP field, and set the option to Y. save the changes.

Explanation

Question 30 of 71

1

Which statement describes the action to assure the system platform was installed correctly?

Select one of the following:

  • A. From the laptop connected to the network, ping the dom0 IP address and verify a successful response.

  • B. Immediately after the installation, verify the DVD is ejected from the drive and that the server reboots.

  • C. After connecting the server using PuTTY and logging in as root, verify there are no errors when
    running the xm list command.

  • D. From the system management console browser, verify domain-0 and cdom are running

Explanation

Question 31 of 71

1

Which statement is true about duplex servers in CM 6.0?

Select one of the following:

  • A. The survivable remote Duplex template includes branch session ,manager

  • B. CM uses the high availability that system platform can now provide

  • C. The license for the survivable server is different than the license file of the main server

  • D. The main and all survivable servers require an authentication file

Explanation

Question 32 of 71

1

System platform web console is used to apply the service pack for which three virtual machines?

Select one or more of the following:

  • System platform

  • AES 6.0

  • Utility Server

  • Communication Manager 6.0

  • CMM 6.0

Explanation

Question 33 of 71

1

System platform web console is used to apply the service pack for which three virtual machines?

Select one or more of the following:

  • System platform

  • AES 6.0

  • Utility Server

  • Communication Manager 6.0

  • CMM 6.0

Explanation

Question 34 of 71

1

Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) to CM 6.0?

Select one of the following:

  • Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.

  • Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after rebooting.

  • Insert the raid CD, reboot the server, and than take backup.

  • Insert the hard drive and the 3rd hard drive is incorporated automatically

Explanation

Question 35 of 71

1

Which communication manager 6.0 command is used to add a new survivable

Select one of the following:

  • add surviveable-processor

  • add survivable-processor ess

  • add survivable-processor core

  • add survivable-processor

Explanation

Question 36 of 71

1

Which Ethernet port on S8800 server is connected to the customer network?

Select one of the following:

  • ETH0

  • ETH1

  • ETH2

  • ETH3

Explanation

Question 37 of 71

1

When using the Avaya Site Administration GSDI interface, which command would be use to built a new
telephone set with the extension of 1000?

Select one of the following:

  • New station 1000

  • Add station 1000

  • Build station 1000

  • Add set 1000

Explanation

Question 38 of 71

1

Which two components are part of the Avaya Aura CM_Simplex template? (Choose two)

Select one or more of the following:

  • Utility services

  • CM 6.0

  • Session manager 6.0

  • Avaya Enablement Services (AES)

Explanation

Question 39 of 71

1

When using the Avaya Site Administrator GEDI interface, which command would be used to confirm the
media gateway number 3 is registered?

Select one of the following:

  • Show media-gateway 3

  • Display media-gateway 3

  • Print media-gateway 3

  • View media-gateway 3

Explanation

Question 40 of 71

1

For Avaya Aura CN6.0, how is the license file installed on the server?

Select one of the following:

  • By accessing the web interface of CM

  • Using the load license command through shell prompt of CM

  • Through the web interface of DOM0

  • Using the web interface of Console Domain

Explanation

Question 41 of 71

1

Concerning the type of integration with communication manager, on the navigation pane, where us the
communication manager messaging 6.0 application mentioned or configured?

Select one of the following:

  • Click the system wide Messaging parameters, than switch integration type field.

  • Click the switch link administration, and then switch type.

  • Click integration type

  • Click Switch link administration, then switch link admin, and then switch integration type field

Explanation

Question 42 of 71

1

A small enterprise customer needs 450 SIP /H.323 users.Which CM 6.0 template will be the most economical solution?

Select one of the following:

  • A. CM_Simplex

  • B. CM_survRemote_Embeded

  • C. CM_Duplex

  • D. CM_onlyEmbeded

Explanation

Question 43 of 71

1

For the Duplex S8800 servers running CM 6.0, by default which Ethernet port communication with IPSts?

Select one of the following:

  • A. Eth0

  • B. Eth1

  • C. Eth2

  • D. Eth3

Explanation

Question 44 of 71

1

When configuring the G450 Media gateway using the Gateway CLI interfaces which command would be
used to view the serial number and software status

Select one of the following:

  • A. Show serial number

  • B. Show system

  • C. Print G450

  • D. Show G450

Explanation

Question 45 of 71

1

Which three elements are needed to CLAN IP interface? (Choose three)

Select one of the following:

  • A. Network region

  • B. Gateway node name

  • C. Node name

  • D. Duplicate node name

  • E. link

Explanation

Question 46 of 71

1

Which three elements are needed to CLAN IP interface? (Choose three)

Select one of the following:

  • A. Network region

  • B. Gateway node name

  • C. Node name

  • D. Duplicate node name

  • E. link

Explanation

Question 47 of 71

1

Which three procedures are used to determine whether a gateway with a survivable remote server has
lost its H.248 link (connection) to the main (Primary) servers? (Choose three)

Select one of the following:

  • A. Execute the communication manager command display alarms, to set whether the link loss delay timer
    has expired.

  • B. Execute the communication manager command display alarms, to see whether the no service timeout
    timer (NSTT) has expired.

  • C. Execute the SAT command list media-gateway from the remote survivable server, to determine
    whether media gateway is registered to the survivable server.

  • D. Execute the SAT command list media-gateway to determine which media gateways are not registered
    to the main server.

  • E. Execute the command status H.248 link from the remote gateway, to determine whether the link to the
    main server is active.

Explanation

Question 48 of 71

1

In which two modes is communication manager Release 6.0 deployed? (Choose two)

Select one of the following:

  • A. Feature server

  • B. Signaling server

  • C. Evolution server

  • D. System management

Explanation

Question 49 of 71

1

Which two hardware components support CM_survRemote template? (Choose two)

Select one of the following:

  • A. S8730 Servers with 8 GB RAM

  • B. S8800 Servers

  • C. S8510 Server with 8 GB RAM

  • D. S8300D Server

Explanation

Question 50 of 71

1

On a media gateway G450, into which Slot does the S8300 D server blade need to be inserted?

Select one of the following:

  • A. V1

  • B. V2

  • C. V4

  • D. V8

Explanation

Question 51 of 71

1

Which statement describes how the licensed mailboxes are enabled on a communication manager
messaging application 6.0?

Select one of the following:

  • A. Mailboxes are enabled in the communication manager 6.0 license file.

  • B. Mailboxes are enabled by a separate license that needs to be generated anddeployed.

  • C. Mailboxes are enabled by default.

  • D. Mailboxes are enabled in the system Parameter features form.

Explanation

Question 52 of 71

1

An administrator has just installed a 9620 IP Phones on an existing system. The command change IP
network-map is use to administer the phone into to network region 100. All other phones are in network
region 1. Like all other 9620 phones on this system, this one successfully gets IP address information fro,
the one DHCP server. However, the new phone fails to register with CM.
Which two statements describe the cause of the problem? (Choose two)

Select one or more of the following:

  • A. Neither PROCR nor CLANs were administered in network region 100

  • B. There are no Medpros or H.248 Media Gateways administered in network region 100

  • C. Network region 100 is not configured to communicate with other network regins

  • D. On the IP interface form, some one recently set the field "Allow H.323 registration" to `n'

Explanation

Question 53 of 71

1

Through which protocols can integration of communication manager messaging application 6.0 with
communication manager occur?
(Choose two)

Select one or more of the following:

  • A. H.323/Q. Sig protocol

  • B. RTP protocol

  • C. SSP protocol

  • D. SIP protocol

Explanation

Question 54 of 71

1

Which statement describes how the communication message application is enabled the first time after the
installation?

Select one of the following:

  • A. Connect the SAT terminal login using the craft, and then enable using the enable messaging
    command.

  • B. Open the communication manager IP address using web browser. Login as craft, click installation, than
    communication manager messaging.

  • C. Open the communication manager IP address using web browser. Login as craft; click Administration,
    then server (maintenance), than click miscellaneous, than messaging software, and than click enable.

  • D. Communication manager messaging is enabled by default after the installation.

Explanation

Question 55 of 71

1

To ensure the communication manager messaging application is working, what are three tests that can
be performed? (Choose three)

Select one or more of the following:

  • A. Call one of the two stations that you set as subscriber to the messaging server, and let the call go to
    coverage

  • B. Leave message on a covered call and verify that the message waiting indicator (MWI) lamp on the
    receiving extension is lit.

  • C. Call the station and after the call is answered leave a message.

  • D. Call the messaging hunt group from any of the stations to ensure it is answering.

  • E. Log into communication manager messaging to verify CDOM is running.

Explanation

Question 56 of 71

1

A customer has a communication Manager R6.0 system with IP phones and some older TDM phone, and
says there is no dial tone for all of the IP phones. All of the hardware has been verified to be working
properly.
Which two steps can be taken to identify the cause of problem? (Choose two)]

Select one or more of the following:

  • A. Verify that the TN2602 Media resources circuit pack has the correct IP settings.

  • B. Verify that the processor Ethernet mode is enabled in the Server.

  • C. Set a static IP address on a laptop and see if the server can be pined

  • D. Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged.

Explanation

Question 57 of 71

1

Which three servers can be upgraded to communication manager Release 6.0? (Choose three)

Select one or more of the following:

  • A. S8300C

  • B. S8300D

  • C. S8510

  • D. S8800

Explanation

Question 58 of 71

1

A network failure prevents communication between all the port networks (IPSIs) and there main CM
servers.
What is the maximum number of port networks (IPSIs) that can be registered to a survivable remote
embedded server?

Select one of the following:

  • A. no port network

  • B. 63 port networks

  • C. 64 port networks

  • D. 126 port networks

Explanation

Question 59 of 71

1

Which Avaya G450 Module provides 8 DCP ports?

Select one of the following:

  • A. MM711

  • B. MM712

  • C. MM7202

  • D. TN2224

Explanation

Question 60 of 71

1

Which two statements regarding shuffling and hairpining are true? (Choose two)

Select one or more of the following:

  • A. Hairpining does not use media processor resources.

  • B. The audio connection type field on the communication manager status station formation can be used
    to determine whether a call is shuffled.

  • C. A call between a DCP endpoint and H.323 end point can be shuffled.

  • D. Shuffling release media processor resources.

Explanation

Question 61 of 71

1

A customer has selected Avaya Aura CM_survremote_embedded template.
Which Avaya server should be used?

Select one of the following:

  • A. S8730 Server 8Gb RAM

  • B. S8800 Server

  • C. S8510Server with 8GB RAM

  • D. S8300D Server

Explanation

Question 62 of 71

1

Which statement describes the action to assure the CM_Simplex Template was installed correctly?

Select one of the following:

  • A. From browser logged into Systen Management Console, verify cm and utility_Server appear and
    application state is running.

  • B. From a browser using the communication Manager IP address, successfullylog into the communication
    manager system management interface (SMI)

  • C. When monitoring the template installation workflow status, verify the message, "Wizard completely
    successfully" displays.

  • D. From a browser logged into communication manager, select administration > server( maintenance)>
    server>process status, click on view and verify communicaMgr appears.

Explanation

Question 63 of 71

1

What two pieces of information does the product licensing and delivery system (PLDS) required to be
entered for a license file to be generated? (Choose two)

Select one or more of the following:

  • A. Serial number

  • B. License activation code

  • C. MAC address

  • D. Platform type

Explanation

Question 64 of 71

1

Which greeting should be received when you are calling the messaging Hunt group?

Select one of the following:

  • A. Welcome to Audix

  • B. Welcome to messaging

  • C. Your call is being answered by Audix

  • D. Please leave a message after the tone

Explanation

Question 65 of 71

1

A user at extension 1111 complaints that when dialing extension 2222, the call is the call is unexpectedly
answered by a person at extension 3333. All other calls made are connected as expected. There is not
display on the phone. While at the SAT, the technician has the user repeat the call to extension 2222
Which command identifies the reason this phone call is behaving in the expected way?

Select one of the following:

  • A. List trace station 1111

  • B. List trace station 3333

  • C. Status station 1111

  • D. Display station 3333

Explanation

Question 66 of 71

1

The backup communication Manager, what two choices does the customer have? (Choose two)

Select one or more of the following:

  • A. Backup/restore

  • B. Backup now

  • C. Schedule backup

  • D. Backup/restore later

Explanation

Question 67 of 71

1

Which MAC address is recommended for the license file?

Select one of the following:

  • A. The MAC address of the Console domain

  • B. The MAC address of the CM eth0 port

  • C. The MAC address of the CM host name

  • D. The MAC address of the DOM0

Explanation

Question 68 of 71

1

A technician is asked to retrieve a maintenance log for CMM that shows the information for 8"00 AM to
5:00 PM local tome that day.
Which shell command should be executed to retrieve the maintenance log?

Select one of the following:

  • A. Show main log 0800 101010

  • B. Displog-1 maint -d 10/10/10 08:00

  • C. Print log for maint 101010 08:00

  • D. Print-1 maint -d 08:00 10/10/10

Explanation

Question 69 of 71

1

Which circuit pack provides an IP Server interface in an Avaya G650 Gateway?
A. TN2312BP

Select one of the following:

  • A. TN2312BP

  • B. TN2342Ac

  • C. MM711

  • D. MM714

Explanation

Question 70 of 71

1

How is the status of virtual machines (eg.DOM-0, CDOM-0, CM 6.0) on S8800 server checked?

Select one of the following:

  • A. By going to the home page of console domain.

  • B. By going to the homepage of Avaya communication manager.

  • C. By going to the home page of Dom 0

  • D. By using the internet explorer http://Cdom .lpaddr/vm

Explanation

Question 71 of 71

1

A user at a remote branch location is registered to a G450 media Gateway connected via processor
Ethernet (PE) to a main communication manager in the core. The report that they are no longer able to
place calls to users at the core
Which three procedures can be used to diagnose the source of problem? (Choose three)

Select one or more of the following:

  • A. Confirm that the registered field on the communication Manager Display media-gateway to Y.

  • B. Conform that the PE interface is active by executing the communication manager display processor
    Ethernet command and confirm that the allow H.248 Gateway field is set to Y.

  • C. Use the show MGC command on the media gateway to confirm the IP address of the PE enabled
    server at the core is administered as the primary controller of the media gateway.

  • D. Use the list registered -IP-station command on the communication manager to determine whether the
    user on the media gateway is registered.

  • E. Use the list survivable processor command to confirm that the survivable server is registered to the
    main communication manager.

Explanation