Final Exam for Stained Glass

Question 1 of 26

1

This tool is used to create a score line in the glass, so the glass will break along that line.

Select one of the following:

Glass Runner
Glass cutter
Glass Knife

Explanation

Question 2 of 26

1

When scoring the glass, I should start and stop my cutter a lot, and I can start my cut in the center of the glass.

Select one of the following:

True
False

Explanation

Question 3 of 26

1

This type of pliers are good for what?

Select one of the following:

To break small pieces of glass for Mosaic
To break curved or small pieces of glass from a scored line on glass
To hold stained glass pieces while soldering to keep hands from burning

Explanation

Question 4 of 26

1

What is the name of this tool?

Select one of the following:

Grozing pliers
Wheeled Nippers
Running Pliers

Explanation

Question 5 of 26

1

True or false? This tool is very inexpensive, and should be thrown in the bin, or not turned back in at all.

Select one of the following:

True
False

Explanation

Question 6 of 26

1

What is this?

Select one of the following:

Solder Iron Stand
Flux Stand
Patina stand

Explanation

Question 7 of 26

1

When do you apply this to your tiffany stained glass?

Select one of the following:

This is patina, you apply it when you are soldering your pieces together
This is patina, you apply it as the absolutely last step in your process
This is patina, you choose either copper or black, and apply to the solder lines after you wash off the flux from soldering.

Explanation

Question 8 of 26

1

Glass cutting oil is very important to have on your glass cutter because...

Select one of the following:

the wheels in the glass cutters need oil to keep glass clear from the axel and lubricate so they roll smooth
the oil creates a line for the glass to break
the teacher tells me to do it, but I have no idea why

Explanation

Question 9 of 26

1

How do you apply this to your glass?

Select one of the following:

Spray on your glass, and let set for 5-10 minutes before wiping off
Drip on seams, and scrub with patina buddy
Take a few drops and buff glass and seams, then use clean clothes to continue buffing until shiny

Explanation

Question 10 of 26

1

What do you see in this picture?

Select one or more of the following:

Foil Wrap
Copper wire
Cooper paper
Copper foil

Explanation

Question 11 of 26

1

These are not scissors...what is it?

Select one of the following:

Pattern cutter
Foil pattern sheer
Three blade scissors

Explanation

Question 12 of 26

1

I'm ready to copy my pattern, what do I do?

Select one of the following:

Make a copy with a copy machine and cut out the pieces with scissors
Make a copy with carbon paper, tape down the original, trace with black pen and cut one out pieces with scissors
Tape down a new paper, tape down the carbon paper black side down, tape down original copy, and trace with colored pencil, and cut out copy with pattern sheers

Explanation

Question 13 of 26

1

What is this? What is it for?

Select one of the following:

This is flux, used to cool the iron when soldering glass together
This is flux, it is used to clean the surfaces of the copper so the solder can fuse with the foil
This is flux, it is used for creating a black line along the solder line

Explanation

Question 14 of 26

1

What is this?

Select one of the following:

A one hundred and ten watt soldering iron
An eighty watt soldering iron

Explanation

Question 15 of 26

1

What is in this picture?

Select one of the following:

Black Patina
Black granite
Black grout
Chocolate

Explanation

Question 16 of 26

1

What is this?

Select one of the following:

Fib
Fid
Foiler
Copper foil

Explanation

Question 17 of 26

1

What tool would I use when I'm braking off a long straight score on a piece of glass?

Select one of the following:

Grozing Pliers
Running Pliers
Wheeled Nippers
Glass Cutter

Explanation

Question 18 of 26

1

Why is it important that you burnish the copper foil until smooth?

Select one of the following:

To make the solder shiny
Because you have to activate the glue on the tape, and that's the only way it will stick
So the flux and other liquid can not get under the copper foil and weaken the solder line
Because Mrs. Ross said to

Explanation

Question 19 of 26

1

When choosing to cut my patterns on a piece of glass, I will always plan my designs on my glass, so I am able to cut the smoother side.

Select one of the following:

True
False

Explanation

Question 20 of 26

1

When I am finished with my grout mixture, I should rinse the rest of it down the drain.

Select one of the following:

True
False

Explanation

Question 21 of 26

1

Chose the correct order of operations.

Select one of the following:

Copy pattern, cut pattern with foil sheers, cut glass patterns, grind pieces to fit, wash pieces, copper foil and burnish smooth, tack and solder seams, wash clean, patina finish, buff shiny with finishing compound
Copy pattern, tack and solder seams, cut pattern with foil sheers, wash clean, cut glass patterns,copper foil and burnish smooth, grind pieces to fit, wash pieces, patina finish, buff shiny with finishing compound
Tack and solder seams, copper foil and burnish smooth, cut pattern with foil sheers, wash pieces, copy pattern, wash clean, patina finish, cut glass patterns, grind pieces to fit, buff shiny with finishing compound

Explanation

Question 22 of 26

1

One way to put emphasis on a detail in your mosaic is to make all the glass the same exact size.

Select one of the following:

True
False

Explanation

Question 23 of 26

1

If I want to emphasize the water in my mosaic I could... (check all that might apply)

Select one or more of the following:

Cut solid blue glass in the a uniform shape
Cut blue glass glass in a wavy shape for texture
Use multiple colors of blue to show movement
Place one piece of a solid blue glass where the water is

Explanation

Question 24 of 26

1

Which options do we have for a patina finish? Choose all that apply.

Select one or more of the following:

White Patina
Black patina
Gold Patina
Blue Patina
No patina-Silver solder finish
Silver Patina
Solder Patina
Copper Patina

	Created by BossRoss almost 9 years ago

This is a comprehensive exam, to measure the learning of students who took the stained glass class at Totino Grace high school

Final Exam for Stained Glass

Final Exam for Stained Glass

Question 1 of 26

This tool is used to create a score line in the glass, so the glass will break along that line.

Select one of the following:

Explanation

Question 2 of 26

When scoring the glass, I should start and stop my cutter a lot, and I can start my cut in the center of the glass.

Select one of the following:

Explanation

Question 3 of 26

This type of pliers are good for what?

Select one of the following:

Explanation

Question 4 of 26

What is the name of this tool?

Select one of the following:

Explanation

Question 5 of 26

True or false? This tool is very inexpensive, and should be thrown in the bin, or not turned back in at all.

Select one of the following:

Explanation

Question 6 of 26

What is this?

Select one of the following:

Explanation

Question 7 of 26

When do you apply this to your tiffany stained glass?

Select one of the following:

Explanation

Question 8 of 26

Glass cutting oil is very important to have on your glass cutter because...

Select one of the following:

Explanation

Question 9 of 26

How do you apply this to your glass?

Select one of the following:

Explanation

Question 10 of 26

What do you see in this picture?

Select one or more of the following:

Explanation

Question 11 of 26

These are not scissors...what is it?

Select one of the following:

Explanation

Question 12 of 26

I'm ready to copy my pattern, what do I do?

Select one of the following:

Explanation

Question 13 of 26

What is this? What is it for?

Select one of the following:

Explanation

Question 14 of 26

What is this?

Select one of the following:

Explanation

Question 15 of 26

What is in this picture?

Select one of the following:

Explanation

Question 16 of 26

What is this?

Select one of the following:

Explanation

Question 17 of 26

What tool would I use when I'm braking off a long straight score on a piece of glass?

Select one of the following:

Explanation

Question 18 of 26

Why is it important that you burnish the copper foil until smooth?

Select one of the following:

Explanation

Question 19 of 26

When choosing to cut my patterns on a piece of glass, I will always plan my designs on my glass, so I am able to cut the smoother side.

Select one of the following:

Explanation

Question 20 of 26