Avaya - 3100 Test - AUTOEVAL -

Question 1 of 92

1

QUESTION NO: 52
With reference to the Alarm Report shown in the exhibit, which option describes the location of the
alarm that occurred on May 13 at 09:25?

Select one of the following:

cabinet 1, gateway b, media module 12, port 12
gateway 1, server b, extension 1212
cabinet 1, carrier b, slot 12, port 12
server 1, gateway b, media module 12, port 12
port network 1, cabinet b, carrier 12, slot 12

Explanation

Question 2 of 92

1

QUESTION NO: 53
Your Avaya Aura® Communication Manager System has been operating without Incident for
several months. Then, one day at 10:00 AM, you get multiple reports about blocked access and
users unable to make calls.
You run Processor Occupancy Summary and Trunk Group Summary reports and determine that
there are no issues with processor occupancy or availability of trunks. So now you decide to see if
someone made a change to the system around 10:00 AM
Which report will show what administrative or maintenance system changes that were made
around 10:00 AM and by whom?

Select one of the following:

A. A history report
B. An activity performed report
C. An administrative or maintenance summary report
D. A hardware error log report
E. A system-parameters change report

Explanation

Question 3 of 92

1

QUESTION NO: 54
Which trunk type is supported by media module MM710, and circuit packs TN767E, TN464HP,
TN2464CP, and TN2207?

Select one of the following:

A. An IP trunk
B. A DSI trunk
C. A SIP trunk
D. An analog trunk

Explanation

Question 4 of 92

1

QUESTION NO: 55
Communication Manager and system Platform each have their own backup function and each
back up different data. For system Platform based systems, both backups need to be done
routinely.
What is a difference between the backup function for System Platform and Communication
Manager?

Select one of the following:

A. Only the Communication Manager backup can encrypt the file.
B. Only the Communication Manager backup can be scheduled.
C. Only the System Platform backup can use secure copy Protocols (SCP).
D. Only the System Platform backup can use secure file transfer protocol (SFTP).

Explanation

Question 5 of 92

1

QUESTION NO: 56
Which feature can you administer using a multi-appearance telephone with Console Permission?

Select one of the following:

A. Receive Security notifications of Authorization codes violation
B. Record integrated Announcements
C. Activate and deactivate Coverage paths for another extension
D. Add and remove agents from CORs

Explanation

Question 6 of 92

1

QUESTION NO: 57
You execute the List history command to display the system transaction log.
Which two types of Information do you expect to find in the transaction log or history report?
(Choose two)

Select one or more of the following:

A. valid user logins and logoffs to or from the system
B. valid and invalid logins and logoffs to or from the system
C. recent, successful administration and maintenance commands to the system
D. recent successful and unsuccessful administration and maintenance commands to the system

Explanation

Question 7 of 92

1

QUESTION NO: 58
Changes that an administrator performs on a system are always only written to ---- RAM.
Which SAT command must be used to copy these changes so that the hard disk, so that in case
of a loss of power, the changes will be available?

Select one of the following:

A. Save ------
B. Copy running configuration startup configuration
C. Copy ------ all
D. Save ------ startup configuration

Explanation

Question 8 of 92

1

QUESTION NO: 59
Through which Communication Manager interface do you add an H.248 gateway to CM?

Select one of the following:

A. System Access Terminal (SAT)
B. System Management Interface (SMI)
C. System Platform Management Console
D. Linux command line

Explanation

Question 9 of 92

1

QUESTION NO: 60
With respect to Avaya Aura®, into which two categories does Communication Manager fit?
(Choose two.)

Select one of the following:

A. Architecture
B. Communication Services
C. Application
D. Gateway

Explanation

Question 10 of 92

1

QUESTION NO: 61
Which ASA main menu option displays the capacity of the Communication Manager?

Select one of the following:

A. Advanced
B. Tasks
C. General
D. Fault and Performance

Explanation

Question 11 of 92

1

QUESTION NO: 62
Which component registers SIP Endpoints?

Select one of the following:

A. System Manager
B. Communication Manager
C. Switch
D. Session Manager

Explanation

Question 12 of 92

1

QUESTION NO: 63
With respect to a Communication Manager Dial Plan, which command shows Multiple Locations
enabled?

Select one of the following:

A. Display Dial Plan Analysis
B. Display System-Parameters Customer Options
C. Display Dial Plan Parameters
D. Display Customer Options

Explanation

Question 13 of 92

1

QUESTION NO: 64
You must configure a deportment manager's station so that calls to employees ring even though
the called station might have send All Calls activated.

Select one of the following:

A. Button activated Executive Calling
B. FAC or button activated Automatic Inclusion
C. FAC or button activated Priority Calling
D. Button activated Send All Calls override

Explanation

Question 14 of 92

1

QUESTION NO: 65
A company is adding a new building to its campus. During construction you receive notice that no
one in the Accounting department, which is supported to move the new building when completed,
can make an outgoing call.
Which Interface and page or command do you use to begin troubleshooting the problem?

Select one of the following:

A. SMI, Network Configuration page
B. SMI, Certificate Alarms page
C. List trace command
D. SAT, display node-names command

Explanation

Question 15 of 92

1

Which two main interfaces are used for Communication Manager administration? (Choose two.)

Select one or more of the following:

A. IPSI
B. SAT
C. SMI
D. COS

Explanation

Question 16 of 92

1

QUESTION NO: 67
You are a technician responsible for an Avaya Aura® Communication Manager implementation.
You need to connect your PC/laptop to the server for initial setup and administration, as well as,
set up a PC/laptop for the customer for on-going administration.
From the following list, which method is best used for on-site access to Communication Manager?

Select one of the following:

A. Through the service PC/laptop connected to the pre-configured CM IP address of 192.11.13.5
B. Through the service PC/laptop connected to the services port on the server using a crossover
cable
C. Through the service PC/laptop connected to the services port on the server using a USB cable
D. Through the service PC/laptop connected to the Secure Access Link (SAL) interface on the
server using a crossover cable

Explanation

Question 17 of 92

1

QUESTION NO: 68
When assigning on Abbreviated Dialing Group lists, by which multiple can the list be increased?

Select one of the following:

A. One
B. Three
C. Five
D. Ten

Explanation

Question 18 of 92

1

QUESTION NO: 69
Changes performed to Communication Manager are written to volatile RAM.
Which Communication Manager SAT command must be used to copy these changes to the hard
disk, so that In case of a loss of power, the changes will be available?

Select one of the following:

A. Save translation
B. Copy running-configuration startup-configuration
C. Copy translation all
D. Save translation startup-configuration

Explanation

Question 19 of 92

1

QUESTION NO: 70
What is the maximum number of digits allowed for a FAC?

Select one of the following:

A. 2
B. 3
C. 4
D. 5

Explanation

Question 20 of 92

1

QUESTION NO: 71
To which two Communication Manager forms are FRLs assigned? (Choose two.)

Select one or more of the following:

A. COS
B. COR
C. Route Pattern
D. Station

Explanation

Question 21 of 92

1

QUESTION NO: 72
AAR is used to route which type of traffic?

Select one of the following:

A. Internal/Private Network
B. External/Public Network
C. Public Switched Telephone Network
D. Internal and External Networks

Explanation

Question 22 of 92

1

QUESTION NO: 73
A customer wants to connect two branch offices with an ISDN trunk, where each branch office has
a PBX system.
Which Service Type should be selected when configuring the trunk?

Select one of the following:

A. Tie
B. Tandem
C. Central Office (CO)
D. Direct Inward Dial (DID)

Explanation

Question 23 of 92

1

QUESTION NO: 74
In Communication Manager, which two Interfaces support DS1 trunks? (Choose two.)

Select one or more of the following:

A. Circuit Pack
B. ISDN/BRI
C. Media Module
D. Port Network

Explanation

Question 24 of 92

1

Which Call Coverage feature enables the call to be sent back to the originator?

Select one of the following:

A. Go To
B. Send All Calls
C. Consult
D. Busy

Explanation

Question 25 of 92

1

QUESTION NO: 76
When adding an extension, you must conform to which form In Communication Manager?

Select one of the following:

A. COR
B. COS
C. Dial Plan
D. FAC

Explanation

Question 26 of 92

1

Refer to the exhibit.
Consider the settings shown in the exhibit displayed by using the display route-pattern command.
You must deny calls from users in COR 10 to use route pattern 1.
To what should the Facility Restriction Level (FRL) for COR 10 be set?

Select one of the following:

A. 2
B. 3
C. 4
D. 5
E. 6

Explanation

Question 27 of 92

1

QUESTION NO: 78
Which command is needed to verify an Enhanced Call Forwarding destination?

Select one of the following:

A. Change station xxxx
B. Status station xxxx
C. Add station xxxx
D. Edit station xxxx

Explanation

Question 28 of 92

1

QUESTION NO: 79
Which two fields and settings must be verified on the system-parameters customer-options form
when adding 16xx or 96xx type telephones? (Choose two.)

Select one or more of the following:

A. Maximum Concurrently Registered IP Stations greater than "0"
B. Maximum Media Gateway VAL Sources greater than "0"
C. Maximum Off-PBX Telephones greater than "0"
D. IP Stations field is "y"
E. Digital Stations field is "y"

Explanation

Question 29 of 92

1

QUESTION NO: 80
Once the route pattern has been designated for ARS, what is the next step?

Select one of the following:

A. Choose the AAR
B. Choose the FAC
C. Choose the network
D. Choose the trunk group

Explanation

Question 30 of 92

1

QUESTION NO: 81
Which users does Call Park best serve?

Select one of the following:

A. Users who need to retrieve calls from any extension in the system
B. Users who travel domestically using smartphones for basic communication
C. Users who travel Internationally using smartphones for basic communication
D. Users who need to pick up calls from their smartphones while traveling

Explanation

Question 31 of 92

1

QUESTION NO: 82
Which concept is associated with Terminal Translation Initialization <TTI>?

Select one of the following:

A. Class of Service (COS)
B. Class of Restriction (COR)
C. Extension to Cellular (EC)
D. Administration without Hardware (AWOH)

Explanation

Question 32 of 92

1

QUESTION NO: 83
When creating on administrator account, what is the setting In the user profile that allows full
access for all commands?

Select one of the following:

A. r-
B. rm
C. wm
D. rx

Explanation

Question 33 of 92

1

Which two features are ports of COS? (Choose two.)

Select one or more of the following:

A. Data Privacy
B. Bridged Call Appearance
C. ISDN-PRI
D. Console Permissions

Explanation

Question 34 of 92

1

Which type of traffic does a DID trunk support?

Select one of the following:

A. Incoming and outgoing calls between the telephone system and the local central office
B. Customer-provided equipment to the telephone system
C. Incoming calls routed directly to internal extensions
D. Outgoing calls between telephone system and the local central office

Explanation

Question 35 of 92

1

QUESTION NO: 86
What does the Class of Service (COS) setting control?

D. The pre-defined features that a user can access and use

Select one of the following:

A. The applications that a user can access and use
B. The capabilities or limits of calling privileges
C. The level of service that the user will receive
D. The pre-defined features that a user can access and use

Explanation

Question 36 of 92

1

QUESTION NO: 87
Which statement is true about the Station Lock feature?

Select one of the following:

A. The feature permits only incoming calls, and using a FAC and security code permits emergency
or outgoing calls.
B. The feature permits only outgoing calls, and using a FAC and security code permits Incoming
and outgoing calls.
C. The feature permits Incoming calls, and the telephone can be unlocked only from designated
telephone(s) by inputting a security code.
D. The feature overrides the COR of a station.

Explanation

Question 37 of 92

1

QUESTION NO: 88
On the add trunk-group x form, what must match the DAC in the Dial Plan Analysis form?

Select one of the following:

A. FNPA
B. TAC
C. COS
D. Ext

Explanation

Question 38 of 92

1

QUESTION NO: 89
Which Call Pickup Group allows the administrator the ability to combine different Pickup Groups?

Select one of the following:

A. Directed Call Pickup
B. Pickup Group
C. Expanded Pickup Group
D. Extended Pickup Group

Explanation

Question 39 of 92

1

QUESTION NO: 90
Which signaling protocol registers with Communication Manager?

Select one of the following:

A. SIP
B. H.225
C. H.323
D. SIP1

Explanation

Question 40 of 92

1

QUESTION NO: 91
In Communication Manager, in which way are alarms classified?

Select one of the following:

A. By the number of times the alarms are recorded
B. As a function of their effect on the system's operation
C. Whether the alarms are on-board or off-board
D. By the number of errors that appear

Explanation

Question 41 of 92

1

QUESTION NO: 92
You execute the list history command.
Which type of information do you expect to find in the history report?

Select one of the following:

A. ASG session establishment/rejection data
B. Processor occupancy statistics
C. Security violation status summary
D. Log Ins/logoffs, administrative and maintenance action commands

Explanation

Question 42 of 92

1

QUESTION NO: 51
In addition to protocol and function, which two other factors affect the choice of trunk type?
(Choose two)

Select one or more of the following:

A. number of users
B. link bounce timer value
C. type of endpoints
D. distance
E. type of gateways

Explanation

Question 43 of 92

1

QUESTION NO: 50
Which parameters must be configured to implement Automatic Route Selection (ARS)?

Select one of the following:

A. Dial Plan, Codec Set, Private Numbering, Network Region
B. Far-End Node, Near-End Node, Coverage Path, Call Forwarding
C. Feature Access Code, Digit Analysis, Digit Conversion, Route Pattern, Trunk Group
D. MGC List, H 2<18 Link Timer, Call Admission Control. Feature Access Code

Explanation

Question 44 of 92

1

QUESTION NO: 49
A remote user who uses Avaya Softphone to work from home reports that the client (Desktop)
application will not register. After verifying that the user has configured the softphone application to
“point” to the correct IP address of a communication manager gatekeeper using administered
extension, you ask if the user supplied a password when logging on. The user confirms that the
password was used on each log-on attempt.
You look up the user’s information and note that the type field is 4620 (IP telephone) and the
Security Code field is #.
With referent e to the scenario described in the exhibit, which form will help you diagnose the
situation?

Select one of the following:

A. feature access
B. station
C. coverage path
D. remote access security
E. class of service

Explanation

Question 45 of 92

1

QUESTION NO: 48
Which Communication Manager command creates the most helpful report to diagnose problems
with users who, when attempting to place outgoing calls, get reorder tone?

Select one of the following:

A. List trace station
B. List measurement occupancy
C. List performance hunt-group
D. List measurements call-rate

Explanation

Question 46 of 92

1

QUESTION NO: 47
A user reports that when attempting to dial an external call to local number the system does
nothing – just silence.
You interview the user as follows.
You: What happens if you longer after you dial your number?
User: once I waited for about half a minute, then I heard these tones that supported the something
was wrong.
You: Did the sound stay on the same pitch or did it change pitches back and forth?
User: Back and forth one pitch higher than the other.
You: OK, that helps. What did you dial to get an outside line?
User: Nine (9)
You: Thank you, I appreciate the information, I will get back with you shortly.
With reference to the scenario described in the exhibit, which statement most accurately describes
the situation?

Select one of the following:

A. The user should have been able to complete the call as dialed
B. The system must be re-administered to correct the situation
C. After dialing "9" the user should have dialed more digits, then the external call would have
completed
D. The user did not dial the correct access code to make an external call

Explanation

Question 47 of 92

1

QUESTION NO: 46
Which two Fields and Settings must be verified on the system-parameters customer-options form
when adding 46xx or 96xx type telephones? (Choose two)

Select one or more of the following:

A. Maximum Concurrently Registered IP Stations greater than "0"
B. Maximum Media Gateway VAL Sources greater than "0"
C. Maximum Off-PBX Telephones greater than "0"
D. IP Stations field in "y"
E. Digital Stations field In "y"

Explanation

Question 48 of 92

1

QUESTION NO: 45
You are a technician responsible for an Avaya Aura® Communication Manager Implementation
and you need to connect your PC/laptop to the server for Initial setup and administration, as well
as setup a PC/laptop for the customer to do on-going administration.
Which two methods are available for on-site access to the Communication Manager server?
(Choose two.)

Select one or more of the following:

A. through any PC on the customer's LAN connecting to the predefined, static IP addresses for
the communication server or the service PC
B. through the service PC/laptop connected to the services port on the communication server
using a crossover cable
C. through the service PC/laptop connected to the services port on the communication server
using a USB cable
D. through the service PC/laptop connected to the SAL (secure access link) interface on the
communication server using a crossover cable

Explanation

Question 49 of 92

1

QUESTION NO: 44
The monitor and display capacity commands can be sued to get a real-time status of the system
using Avaya Site Administration (ASA).
Which command and tool should you use to view the current load for a specific trunk group?

Select one of the following:

A. monitor load command using terminal emulation
B. monitor traffic command using terminal emulation
C. monitor traffic command using GEDI
D. display capacity using GEDI or terminal emulation

Explanation

Question 50 of 92

1

QUESTION NO: 43
System functionality for a user is controlled by accessing one of the 16 class of service (COS)
settings.
What does the COS settings control?

Select one of the following:

A. the applications that a user can access and use
B. the capabilities or limits of calling privileges
C. the level of service that the user will get during peak usage time
D. the optional features that a user can access and use

Explanation

Question 51 of 92

1

Consider the ARS Digit Conversion Table and ARS Digit Analysis Table shown in the exhibit. A
user dials the sequence 9602323501 in a system where the number 9 is assigned to Automatic
Route Selection (ARS) FAC.
What Route Pattern will route the call?

Select one of the following:

A. Route Pattern 1
B. Route Pattern 2
C. Route Pattern 3
D. Route Pattern 4

Explanation

Question 52 of 92

1

QUESTION NO: 41
When adding an IP Station type 96xx, which statement is true regarding the port field?

Select one of the following:

A. It is automatically populated by the system as “IP”.
B. It must be populated as "SOOOXX"
C. It must be populated with an available port on an MM712 or TN2214
D. It must be populated with an available port on the LAN switch.

Explanation

Question 53 of 92

1

QUESTION NO: 40
You must add 500 new stations with a four digit length, starting with station 4500.
What information must you populate in the dial plan analysis form?

Select one of the following:

A. Dialed String = 4; Total Length =4; Call type = sta
B. Dialed String = 45; Total Length =4; Call type = ext
C. Dialed String = 4; Total Length =4; Call type = ext
D. Dialed String = 45; Total Length =4; Call type = sta

Explanation

Question 54 of 92

1

QUESTION NO: 39
A customer wants to connect two branch offices with an ISDN trunk, where each branch office has
a PBX system.
Which service Type Should you selected in the configuration of the trunk?

Select one of the following:

A. Tie
B. Tandem
C. Operator
D. Internal

Explanation

Question 55 of 92

1

QUESTION NO: 1
There are two GUI-based access tools available: Avaya site administration (ASA) and system
management interface (SMI).
Which statement correctly differentiates between ASA and SMI?

Select one of the following:

A. Both SMI and ASA can perform the same administration tasks but ASA is being replaced by
SMI.
B. Both SMI and ASA can perform the same administration tasks but SMI is for technicians and
ASA is for customers.
C. SMI provides access to less frequent administration, installation and upgrade functions, while
ASA provides access to day-to-day administration functions.
D. Old hardware and software (Pre – 5.x) is administered using SMI, while current hardware and
software (5.x and later) is administered using ASA.

Explanation

Question 56 of 92

1

QUESTION NO: 2
Consider the signaling Group Information shown in the exhibit.
Which SAT command can you use to get the IP address of the Far-end Node of the Signaling
group 50?

Select one of the following:

A. Display board CLAN10
B. List node-name all
C. List ip-address nodes
D. List ip-interface nodes

Explanation

Question 57 of 92

1

QUESTION NO: 3
Communication Manager Backups are done through the system management interface (SMI).
Which three statements about the Communication Manager backup function are correct? (Choose
three)

Select one or more of the following:

A. The backup function creates two complete files on the internal hardware drive.
B. The backup function can create a file on a network device using protocols: SCP, SFTP, or FTP.
C. The backup function can encrypt the file with a pass phrase.
D. The backup is done dynamically and cannot be scheduled in advance.
E. The full Backup option does not do Save Transaction Command Automatically before creating
the backup file.

Explanation

Question 58 of 92

1

QUESTION NO: 4
You are adding ten new IP telephones in a small company administered with a G430 Media
Gateway and a S8300D ICC main server. The G430 has the S8300D inserted in the slot V1, and
MM710 in the slot V2, and an MM712 in the slot V3.

Which hardware module will act as Gatekeeper for the telephones?

Select one of the following:

A. MM710
B. MM712
C. MGP on the media gateway
D. S8300D server using Processor Ethernet (PE)

Explanation

Question 59 of 92

1

QUESTION NO: 5
The Avaya Extension to Cellular feature provides users with the capability to have one
administered telephone that supports communication manager features for both an office
telephone and one outside cellular or wireless telephone, two fields must be set to “Yes” in order
to use this functionality:
Enhanced EC500 and extended Cvg/Fwd Admin.
Which command do you use to verify the field settings?

Select one of the following:

A. System-parameters features
B. System-parameters customer-options
C. System-parameters wireless
D. System-parameters converge-forwarding

Explanation

Question 60 of 92

1

QUESTION NO: 6
A remote user Avaya softphone to work from home reports that the client desktop application will
not register. After verifying that the user has configured the softphone application to “point” to the
current IP address of a Communication Manager Gatekeeper using an administered extension,
you ask if the user supplied a password when logging on. The user confirms that the password
was used on each log-on attempt.
You look up the user’s information and note that the type field is 4620 (IP telephone) and the
security code field is.

With reference to the scenario described in the exhibit, which action should you take to ensure that
the user can use the IP SoftPhone?

Select one of the following:

A. Change the IP SoftPhone field to y.
B. Change the Converge Path 1 value to match the value in converge path 2.
C. Change the message Lamp Ext value to match the extension number.
D. Change the name in the name field to match the name as administered in the LDAP directory

Explanation

Question 61 of 92

1

QUESTION NO: 7
You want a user’s station to be able to dial extension 5605 and 5608 only.
Which station configuration will achieve this?

Select one of the following:

A. Assign COR 11 to user’ station, In COR11
Set COR-to COR calling permission = ‘n’ for all except COR 10.
Assign COR to 5605 and 5608.
Ensure that these two CORs are not assigned to any other station object.
B. The FRL = 7to user’s station. FRL = 7 to station 5606 and 5608.
Set FRL for all other stations to 6 and lesser
C. Assign COR 10 to user’s station.
In COR 11, set CPR-to-COR calling permission = ‘n’ for all except.
Assign COR 11 to 5605 and 5608.
Ensure that these two CORs are not assigned to any other object.
D. The FRL = 5 to user’s station, FRL = 7 to station 5606 and 5608.
Set FRL for all other stations to 5 or lesser.

Explanation

Question 62 of 92

1

QUESTION NO: 8
With reference to the Dial Plan Analysis Tables, how many codes are available in the system for
activation / deactivation of features?

Select one of the following:

A. 2
B. 3
C. 11
D. 21

Explanation

Question 63 of 92

1

QUESTION NO: 9
You have to add a new G650 Media Gateway to the system.
Which command will perform this I

Select one of the following:

A. add cabinet next
B. add port network next
C. add media – gateway next
D. add G6SO-port next.

Explanation

Question 64 of 92

1

QUESTION NO: 10
Although not exactly the same, a bridged call appearance and a team button can perform some of
the same functions.
Which statement correctly contrasts the team button and bridged call appearance?

Select one of the following:

A. The team button does not allow conferencing to an active call or speed dial to the monitored
station.
B. The team button allows conferencing to an active call and making outgoing calls for the
monitored station.
C. The bridged call appearance does not allow conferencing to an active call or speed dial to the
mirrored station.
D. The bridged call appearance allows conferencing to an active call and making outgoing calls for
the mirrored station.

Explanation

Question 65 of 92

1

QUESTION NO: 11
You need to configure a station so that when a department manager makes calls to employees the
manager's calls will ring even though the called station might have Sent All Calls activated.
Although the manager's station can be designated as a VIP telephone, the manger must be able
to selectively activate this feature.
Which feature addresses this need?

Select one of the following:

A. Button activated Executive Calling
B. FAC or button activated Automatic Inclusion
C. FAC or button activated Priority Calling
D. Button activated Send All Calls override

Explanation

Question 66 of 92

1

QUESTION NO: 12
Your customer has a communication Manager 6.0 branch location with SIP endpoints that need to
survive a WAN failure when communication to the core or main Session Manager is unavailable.
Which solution will provide survivability to the remote location?

Select one of the following:

A. an S8300 configured as an local survivable processor (LSP)
B. a simplex server configured as an enterprise survivable server (ESS)
C. an S8300 or simplex server configured as a Survivable Remote
D. an S8300 01 simplex server configured for high availability (HA)

Explanation

Question 67 of 92

1

QUESTION NO: 13
Consider the settings shown in exhibit displayed by using the display route – pattern command.
You must deny calls from users in COR 10 to use route pattern 1. What should the fault restriction
level (FRL) for COR 10 be?

Select one of the following:

A. 2
B. 3
C. 4
D. 5
E. 6

Explanation

Question 68 of 92

1

QUESTION NO: 14
With reference to the list trace station 1101 printout shown in the exhibit, what statement describes
what happened during the time period of the trace?

Select one of the following:

A. Station 1101 called station, hung-up and finally called station 100.
B. Station 1101 called station 1000, the unanswered call went to the voicemail, and finally station
1101 called 1001.
C. Station 1101 called station 1000, and the station answered, then station 1000 transferred to call
to station 1001.
D. Station 1101 called station 1000, unanswered; the call covered the station 1001

Explanation

Question 69 of 92

1

QUESTION NO: 15
You are configuring Personal Station Access (PSA) and you configure the Communication
Manager with the following settings:
- Set TTI enabled = ‘Y’
- Set PSA Associated code = ‘25’ and disassociate code ‘#25’
- Set security code for the station = ‘1234’
You activate the station by keying in FAC for PSA, station extension number, ‘#’, the security code
of the station, and ‘#’. However, the station is not activated.
Which statement describes the issue to be addressed?

Select one of the following:

A. You need to set TTI = ‘n’
B. You did not enable PSA on the COS of the station.
C. You should not set the security code in sequential order.
D. You did not key in the correct activation sequence

Explanation

Question 70 of 92

1

QUESTION NO: 16
Which statement most accurately describes the major difference between Automatic Alternative
Rom (AAR) and Automatic Route Selection (ARS) in a typical installation?

Select one of the following:

A. AAR routes calls over a public network; ARS routes calls over a private network.
B. AAR routes calls over a private network; ARS routes calls over a public network.
C. AAR chooses routes automatically; ARS chooses routes according to pre programmed, bestchoice
parameters.
D. AAR chooses routes automatically; ARS chooses routes according to a manually administered
route plan.

Explanation

Question 71 of 92

1

QUESTION NO: 17
The monitor and display capacity commands can be used to get a real-time status of the system
using Avaya Site Administration (ASA).
Which command and tool should you use to view a summary of the overall condition of the
system?

Select one of the following:

A. Monitor system command using terminal emulation mode
B. Monitor system command using GEDI
C. Monitor status command using terminal emulation mode
D. Display status using GEPI or terminal emulation mode

Explanation

Question 72 of 92

1

QUESTION NO: 18
Which setting in the system parameter feature screen will enable TTI to be applicable to both
analog and digital stations?

Select one of the following:

A. Terminal Trans. Init.? Y, TTI state = ‘voice’, TTI enable = ‘y’, TTI security code = ‘1709’, CTI
enabled = ‘n’.
B. Terminal Trans. Init.? Y, TTI state = ‘data’, TTI enable = ‘y’, TTI security code = ‘1709’, CTI
enabled = ‘y’.
C. Terminal Trans. Init.? Y, TTI state = ‘vdata’, TTI enable = ‘y’, TTI security code = ‘1709’, CTI
enabled = ‘n’.
D. Terminal Trans. Init.? Y, TTI state = ‘voice’, TTI enable = ‘y’, TTI security code = ‘1709’, CTI
enabled = ‘y’.

Explanation

Question 73 of 92

1

QUESTION NO: 19
Which user’s does Call Park best serve?

Select one of the following:

A. users who travel domestically using smartphones for basic communication
B. users who need to pick up calls from any extension In the system when the call Is placed on
hold
C. users who travel internationally using smartphones for basic communication
D. users who need to pick up calls from their smartphones while traveling

Explanation

Question 74 of 92

1

QUESTION NO: 20
Which statement most accurately describes the function of automatic call back feature?

Select one of the following:

A. It allows internal users who placed a call to a busy or unanswered external telephone to be
called back when the called telephone becomes available.
B. It allows internal users who placed a call to a busy or unanswered internal telephone to be
called back when the called telephone becomes available.
C. It allows internal users who are called when they are busy to activate a feature to automatically
call back that second caller, once the first call is finished.
D. It allows internal users who are called when they are busy to place the second call on hold until
the first call is finished.

Explanation

Question 75 of 92

1

QUESTION NO: 21
Which two Statements are true about Automatic Route Selection (ARS)? (Choose two)

Select one or more of the following:

A. ARS routes calls only across tie trunks to local switching equipment.
B. ARS routes calls to remote company locations in the absence of a private network.
C. ARS allows Communication Manager to use an ISDN trunk to connect to the PSTN.
D. ARS mutes calls across all trunk types but only to remote switching equipment

Explanation

Question 76 of 92

1

QUESTION NO: 22
Your customer wants to extend their office calls using the Extension to Cellular features.
Where will calls be redirected?

Select one of the following:

A. To another extension on the same system
B. To a hunt group
C. To an administered off-system number
D. To a call pickup group

Explanation

Question 77 of 92

1

QUESTION NO: 23
The station lock feature manually or automatically changes the COR of a station to block outgoing
calls recently, extensions at a customer’s site have been used for out of hours outgoing calls. IT
would like to activate this feature automatically on the telephone on site.
To address safety concerns, what do you tell the site manager regarding outgoing emergency
calls and incoming or outgoing calls if staff needs to work overtime?

Select one of the following:

A. The station lock feature does not block incoming calls and using a code they can make
emergency or outgoing calls.
B. The station lock features does not block outgoing emergency calls and using a code they can
receive incoming calls and make outgoing calls.
C. The station lock feature does not block incoming calls or emergency outgoing calls and the
telephone can be unlocked from designated telephone(s) by inputting a code.
D. The station lock feature does not block incoming calls or emergency outgoing calls and the
telephone can be unlocked by inputting a code.

Explanation

Question 78 of 92

1

QUESTION NO: 24
You run a daily Occupancy Summary Measurements report to monitor system capacity and to
review processor occupancy metrics.
Which occupancy situation is an issue that warrants further analysis?

Select one of the following:

A. For two nonconsecutive hours, the idle Occ value was between 20 and 25 pervent.
B. For one hour, the combined SM Occ and idle Occ was 90 percent.
C. For two consecutive hours, the Static Occ and SM Occ were each below 10 percent.
D. For two consecutive hours, the combined Static Occ and CP occ was 77 percent

Explanation

Question 79 of 92

1

QUESTION NO: 25
You are creating a new ISDN bunk group in a production system and you want to know the
capacity and features that are enabled in the installed license file of the system.
Which command will provide this information?

Select one of the following:

A. system -parameters capacity
B. system-parameters customer-options
C. system -parameters features
D. system-parameters customer-license

Explanation

Question 80 of 92

1

QUESTION NO: 26
You are preparing to configuration the system to perform an automatic daily full backup to external
storage medium.
What Information must you know about HIP FTP server to program the backup?

Select one of the following:

A. IP address, port number, and default directory
B. User name, password, IP address, and default directory
C. User name, password, and default directory
D. IP address, port number, protocol, and default directory

Explanation

Question 81 of 92

1

QUESTION NO: 27
With consideration to the exhibit, in which hardware component do you configure the IP address
150.122 44 210?

Select one of the following:

A. In the Media Gateway
B. In the Server administration port
C. In a CLAN board or Processor Ethernet port
D. In the Server services port

Explanation

Question 82 of 92

1

You are adding five new digital stations in a branch office where there is a G450 media Gateway.
On which media Module do you look for available ports?

Select one of the following:

A. MM717
B. MM711
C. MM712
D. MM714

Explanation

Question 83 of 92

1

QUESTION NO: 29
Administrative users are assigned a user profile that specifies both a web profile group and a SAT
profile group. This controls the functions a user can perform with SAT and within the system
Management Interface (SMI).
How does the SAT profile control the functions?

Select one of the following:

A. It controls the SAT “action” commands the user can use.
B. It controls the time of day that the user can do Sat administration.
C. It controls which SAT screens or categories the user can access.
D. It controls the type of SAT access (GEDI or terminal emulation) the user can use.

Explanation

Question 84 of 92

1

QUESTION NO: 30
Your customer had a short WAN outage and you want to know If all of the gateways have reregistered
with the Communication Manager server.
Which Interface and command must be used?

Select one of the following:

A. ASA with a display process-status command
B. SMI with a process status command
C. SMI with a status summary command
D. ASA with a status media-gateway command

Explanation

Question 85 of 92

1

All release ox and later Avaya Aura® Communication Manager (CM) deployments support secure
link access: SAL for remote access to the server and alarm notification from the server to the
support engineer?
Which hardware or software is required at the customer site for SAL support of the CM server?

Select one of the following:

A. SAL software is required and uses a separate SAL server.
B. SAL software is required and uses a secure external modem.
C. SAL software is part of System Platform and requires no additional hardware.
D. SAL software is part of System Platform and uses a remote maintenance board (RMB) that
must be installed in the server.

Explanation

Question 86 of 92

1

QUESTION NO: 32
Security Violation show valid and invalid attempts to access the system using three types of
codes.
In addition to station security codes, which two types of codes are measured in security Violation
reports? (Choose two)

Select one or more of the following:

A. Barrier codes
B. Access security gateway (ASG) codes
C. Dial access codes (DAC)
D. Authorization codes
E. Administrative login codes

Explanation

Question 87 of 92

1

QUESTION NO: 33
For which purpose is Automatic Alternate Routing (AAR) used?

Select one of the following:

A. Calls placed within a company over a public network
B. Calls placed within a company over a private network
C. Calls placed from outside a company over a private network
D. Calls placed from outside a company over a public network

Explanation

Question 88 of 92

1

QUESTION NO: 34
Which command must be used to define the system internal number scheme of the extensions?

Select one of the following:

A. Change diaplan parameters
B. Change node-name IP
C. Change dialplan analysis
D. Change uniform-dialplan

Explanation

Question 89 of 92

1

QUESTION NO: 35
Your customer does not use an AAA server. You have been asked to add four new administrative
users with a new user profile that has display only access and no maintenance for the same
categories as profile 20.
Which interface must be used?

Select one of the following:

A. ASA with GED1
B. ASA with terminal emulation
C. SMI
D. SMI or ASA

Explanation

Question 90 of 92

1

QUESTION NO: 36
A user reports that when attempting to dial an external call to local number the system does
nothing – just silence.
You interview the user as follows.
You: What happens if you longer after you dial your number?
User: once I waited for about half a minute, then I heard these tones that supported the something
was wrong.
You: Did the sound stay on the same pitch or did it change pitches back and forth?
User: Back and forth one pitch higher than the other.
You: OK, that helps. What did you dial to get an outside line?
User: Nine (9)
You: Thank you, I appreciate the information, I will get back with you shortly

With reference to the scenario shown in the exhibit, which action should you take?

Select one of the following:

A. Re-administer the Dial Plan to requiring 10 digits for making local external calls
B. Determine the correct Feature Access Code to make an external call and inform the user
C. Re-administer the feature access code for the user’s situation to dial ‘9’ to make an external
call.
D. Do nothing to the Dial Plan but delete the “*” Feature Access Code

Explanation

Question 91 of 92

1

QUESTION NO: 37
You must set the calling privileges for a user so that the user can make calls but not receive calls.
You assign COR 5 to the user’s station.

What other settings must be completed?

Select one of the following:

A. In COR 5, set calling party restriction = ‘origination’ and called party restriction = ‘none’
B. In COR 5, set calling party restriction = ‘outward’ and called party restriction = ‘termination’
C. In COR 5, set calling party restriction = ‘origination’ and called party restriction = ‘termination’
D. In COR 5, set calling party restriction = ‘none’ and called party restrictions = ‘termination’

Explanation

Question 92 of 92

1

QUESTION NO: 38
You must verify in a production system that the number of rings between each point for coverage
paths is two rings. You access the system-parameters coverage-forwarding from and check that
the value for the local coverage Subsequent Redirection/ CFWD No Answer interval field is set to
2.
Which users will be affected by this setting?

Select one of the following:

A. users belonging to a specific COR
B. users belonging to a specific COS
C. users belonging to a specific COS-group
D. all users in the system

	Created by DAVID MONTALVA over 8 years ago

Quiz on Avaya - 3100 Test - AUTOEVAL -, created by DAVID MONTALVA on 09/09/2015.

Avaya - 3100 Test - AUTOEVAL -

Avaya - 3100 Test - AUTOEVAL -

Question 1 of 92

QUESTION NO: 52 With reference to the Alarm Report shown in the exhibit, which option describes the location of the alarm that occurred on May 13 at 09:25?

Select one of the following:

Explanation

Question 2 of 92

Select one of the following:

Explanation

Question 3 of 92

QUESTION NO: 54 Which trunk type is supported by media module MM710, and circuit packs TN767E, TN464HP, TN2464CP, and TN2207?

Select one of the following:

Explanation

Question 4 of 92

QUESTION NO: 55 Communication Manager and system Platform each have their own backup function and each back up different data. For system Platform based systems, both backups need to be done routinely. What is a difference between the backup function for System Platform and Communication Manager?

Select one of the following:

Explanation

Question 5 of 92

QUESTION NO: 56 Which feature can you administer using a multi-appearance telephone with Console Permission?

Select one of the following:

Explanation

Question 6 of 92

QUESTION NO: 57 You execute the List history command to display the system transaction log. Which two types of Information do you expect to find in the transaction log or history report? (Choose two)

Select one or more of the following:

Explanation

Question 7 of 92

QUESTION NO: 58 Changes that an administrator performs on a system are always only written to ---- RAM. Which SAT command must be used to copy these changes so that the hard disk, so that in case of a loss of power, the changes will be available?

Select one of the following:

Explanation

Question 8 of 92

QUESTION NO: 59 Through which Communication Manager interface do you add an H.248 gateway to CM?

Select one of the following:

Explanation

Question 9 of 92

QUESTION NO: 60 With respect to Avaya Aura®, into which two categories does Communication Manager fit? (Choose two.)

Select one of the following:

Explanation

Question 10 of 92

QUESTION NO: 61 Which ASA main menu option displays the capacity of the Communication Manager?

Select one of the following:

Explanation

Question 11 of 92

QUESTION NO: 62 Which component registers SIP Endpoints?

Select one of the following:

Explanation

Question 12 of 92

QUESTION NO: 63 With respect to a Communication Manager Dial Plan, which command shows Multiple Locations enabled?

Select one of the following:

Explanation

Question 13 of 92

QUESTION NO: 64 You must configure a deportment manager's station so that calls to employees ring even though the called station might have send All Calls activated.

Select one of the following:

Explanation

Question 14 of 92

Select one of the following:

Explanation

Question 15 of 92

Which two main interfaces are used for Communication Manager administration? (Choose two.)

Select one or more of the following:

Explanation

Question 16 of 92

Select one of the following:

Explanation

Question 17 of 92

QUESTION NO: 68 When assigning on Abbreviated Dialing Group lists, by which multiple can the list be increased?

Select one of the following:

Explanation

Question 18 of 92

QUESTION NO: 69 Changes performed to Communication Manager are written to volatile RAM. Which Communication Manager SAT command must be used to copy these changes to the hard disk, so that In case of a loss of power, the changes will be available?

Select one of the following:

Explanation

Question 19 of 92

QUESTION NO: 70 What is the maximum number of digits allowed for a FAC?

Select one of the following:

Explanation

Question 20 of 92

QUESTION NO: 71 To which two Communication Manager forms are FRLs assigned? (Choose two.)

Select one or more of the following:

Explanation

QUESTION NO: 52
With reference to the Alarm Report shown in the exhibit, which option describes the location of the
alarm that occurred on May 13 at 09:25?

QUESTION NO: 54
Which trunk type is supported by media module MM710, and circuit packs TN767E, TN464HP,
TN2464CP, and TN2207?

QUESTION NO: 55
Communication Manager and system Platform each have their own backup function and each
back up different data. For system Platform based systems, both backups need to be done
routinely.
What is a difference between the backup function for System Platform and Communication
Manager?

QUESTION NO: 56
Which feature can you administer using a multi-appearance telephone with Console Permission?

QUESTION NO: 57
You execute the List history command to display the system transaction log.
Which two types of Information do you expect to find in the transaction log or history report?
(Choose two)

QUESTION NO: 58
Changes that an administrator performs on a system are always only written to ---- RAM.
Which SAT command must be used to copy these changes so that the hard disk, so that in case
of a loss of power, the changes will be available?

QUESTION NO: 59
Through which Communication Manager interface do you add an H.248 gateway to CM?

QUESTION NO: 60
With respect to Avaya Aura®, into which two categories does Communication Manager fit?
(Choose two.)

QUESTION NO: 61
Which ASA main menu option displays the capacity of the Communication Manager?

QUESTION NO: 62
Which component registers SIP Endpoints?

QUESTION NO: 63
With respect to a Communication Manager Dial Plan, which command shows Multiple Locations
enabled?

QUESTION NO: 64
You must configure a deportment manager's station so that calls to employees ring even though
the called station might have send All Calls activated.

QUESTION NO: 68
When assigning on Abbreviated Dialing Group lists, by which multiple can the list be increased?

QUESTION NO: 69
Changes performed to Communication Manager are written to volatile RAM.
Which Communication Manager SAT command must be used to copy these changes to the hard
disk, so that In case of a loss of power, the changes will be available?

QUESTION NO: 70
What is the maximum number of digits allowed for a FAC?

QUESTION NO: 71
To which two Communication Manager forms are FRLs assigned? (Choose two.)

QUESTION NO: 72
AAR is used to route which type of traffic?

QUESTION NO: 73
A customer wants to connect two branch offices with an ISDN trunk, where each branch office has
a PBX system.
Which Service Type should be selected when configuring the trunk?

QUESTION NO: 74
In Communication Manager, which two Interfaces support DS1 trunks? (Choose two.)

QUESTION NO: 76
When adding an extension, you must conform to which form In Communication Manager?

Refer to the exhibit.
Consider the settings shown in the exhibit displayed by using the display route-pattern command.
You must deny calls from users in COR 10 to use route pattern 1.
To what should the Facility Restriction Level (FRL) for COR 10 be set?

QUESTION NO: 78
Which command is needed to verify an Enhanced Call Forwarding destination?

QUESTION NO: 79
Which two fields and settings must be verified on the system-parameters customer-options form
when adding 16xx or 96xx type telephones? (Choose two.)

QUESTION NO: 80
Once the route pattern has been designated for ARS, what is the next step?

QUESTION NO: 81
Which users does Call Park best serve?

QUESTION NO: 82
Which concept is associated with Terminal Translation Initialization <TTI>?

QUESTION NO: 83
When creating on administrator account, what is the setting In the user profile that allows full
access for all commands?

QUESTION NO: 86
What does the Class of Service (COS) setting control?

D. The pre-defined features that a user can access and use

QUESTION NO: 87
Which statement is true about the Station Lock feature?

QUESTION NO: 88
On the add trunk-group x form, what must match the DAC in the Dial Plan Analysis form?