The two primary purposes of physical security are protection and _______________?
A guard checking IDs at the gate of an installation is a good example of what type of security?
___________ is the layering of physical security countermeasures such as fencing, guards, cameras, lighting, and locks.
Before you can conduct a risk analysis based on the impact and likelihood of an unwanted event happening, what steps in the risk management process must you take first?
Determine countermeasure options
Make risk management decisions
Which policy guidance would you consult to find the minimum standards for the physical protection of DoD assets?
DoD 5200.08-R, Physical Security Program
DoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
DoDM 5200.01, Volumes 1-4 DoD Information Security Program
Which policy should you consult to find the physical security requirements of protecting classified information?
Which policy authorizes commanders to issue regulations for the protection or security of property and places under their command?
Who is charged with management, implementation, and direction of all physical security programs?
Physical Security Officer
Who is responsible for providing valuable information on the capabilities, intentions, and threats of adversaries?
Who is responsible for developing countermeasures against potential threats to national security and other DoD assets?
Which of the following individuals should be included in a Threat Working Group?
Counterintelligence (CI) representative
Law enforcement representative
Operations security officer
Information operations representative
Chemical, biological, radiological, nuclear and high yield explosive representative
Which of these can be made of solid steel to make them more attack resistant?
Which of these house ventilation systems that should be secured with steel bars?
Which of these should be covered with a protective film to make them less dangerous in an attack?
Which of the following locks are approved to secure classified information or material?
Kaba Mas X-10
S&G 833 C
Standby lighting is used when regular lighting is not available.
Site lighting is used to enable guard force personnel to observe activities inside or outside the installation.
Movable lighting is used when supplemental lighting is needed such as at construction sites.
At a minimum _________ should include special and general guard orders, access and material control, protective barriers, lighting systems, locks, and Intrusion Detection Systems (IDS).
Standard Operating Procedures
Physical Security Plans
________ establish duties, roles, and responsibilities at individual assignments, checkpoints, gates, and guard posts.
___________provide supplemental guidance for physical security programs and establish procedures for emergency events as well as operational and administrative procedures.
Commanders may only implement measures according to the FPCON level in force at the time.
Commanders must comply with and integrate DoD physical security and installation access control policies into their FPCON plans.
Commanders educate their personnel on the insider threat to DoD elements and personnel.
Which threat level signifies terrorists are present but there are no indications of anti-U.S. activity and the Operating Environment favors the Host Nation or the U.S.?
Who is responsible for assessing requirements for physical security and conducting criticality, vulnerability, and risk assessments?
Antiterrorism Working Group
Threat Working Group
Antiterrorism Executive Committee
Mission Assurance Senior Steering Group
Commanders should comply with and integrate DoD physical security and installation access control policies into their Force Protection Conditions (FPCON) plans.
______________ are provided to senior leaders to assist in determining the appropriate Force Protection Condition (FPCON) level.
Physical security layer strategies
Which of the following establishes duties and responsibilities that assist in maintaining operational order during both normal and stressful situations?
Standard Operating Procedures and the Physical Security Plan
Post Orders and the Physical Security Plan
Standard Operating Procedures and Post Orders
Select ALL the correct responses.
Which of the following are facility access control procedures?
Entry and exit inspections
Inspections can ensure compliance with the physical security plan, verify policy compliance, and promote cost effective security.
Site lighting supplements other protective measures.
Who is responsible for identifying threats and informing the installation Commanding Officer on current threats?
The primary purpose of physical security is prevention and protection.
When required, the two-person concept may be part of a facility access control method.
Select ALL the correct responses. Which of the following are appropriate physical security countermeasures?
Desks with digital drawer locks for classified material
Which of the following implements the physical security aspects of protecting classified information?
Who is responsible for physical security planning, coordination, and integration of identified mission essential capabilities?
Installation Commander/Facility Director
Select ALL the correct responses.
Security Forces may be comprised of which of the following?
DoD civilian personnel
Military working dogs
Military and contract personnel
Which of the following best defines security-in-depth?
The use of fencing around the perimeter of a structure
The use of barriers around the perimeter of a structure
The layering of physical security measures through the application of active and passive complementary security controls
Which of the following physical security countermeasures serve as a security system response force?
Which step in the risk management process is designed to identify and assess the perceived imminence of intended aggression by a capable entity to harm a nation, a government, or its instrumentalities?
Identify and assess Threats
Identify and assess Vulnerabilities
Determine Countermeasure Options
Identify and assess Assets
Which of the following typically establish duties, roles, and responsibilities at individual assignments, checkpoints, and gates?
Who is responsible for supporting antiterrorism concerns, efforts, and emergency response and law enforcement activities?
Law Enforcement Officials
What regulation covers Physical Security?
What regulation covers Information Security?
DODM 5200.01 (Vol 1-4)
What is the Primary purpose of Physical Security?
DODM 52001.01, Vol 1-4
Which policy authorizes commanders to issue regulations for the protection or security and places under their command?
DODM 5200.01, Vol 1-4
Well-designed _______________, including detection, deterrence, delay, denial, and notification, are accomplished through the development of a plan outlining who will do what, where, when, and how.
Threat Level Indicators
Physical security measures
The _____________ system allows commanders to be flexible and adaptable in developing and implementing antiterrorism measures that are more stringent than those mandated by higher authorities whenever they are invoked.
Threat level indicators
Antiterrorism physical security measures
Force Protection Conditions (FPCON)
Who is responsible for developing and maintaining physical security plans, establishing standard policies and procedures for a facility and/or installation?
Select ALL the correct responses. Which of the following are site design considerations that provide a physical and psychological deterrence to intruders?
Card key system for entrance/exit doors
Which of the following are supplemental guidance for implementing specific components of the physical security program to cover events such as major accidents, fire, and bomb threats?
The _________________________ provides oversight in mission assurance efforts on issues that cut across all DoD protection programs and functions as an Office of Secretary of Defense (OSD) and Joint Staff-level management and decision support forum.
Which of the following is conducted by members of your own organization and usually with the aid of a checklist?
Internal Control Inspection
In order to plan and implement effective physical security measures, you must use the __________________ to determine where and how to allocate your security resources.
risk management process
operation assessment process
threat assessment process
vulnerability assessment process
Select ALL the correct responses. Which of the following protective measures can make doors more attack-resistant?
Install solid steel doors
Limit the number of entrances and exits to what is necessary
Mount cameras on the roof
What is the first line of defense in any physical security system?
Barriers and fencing
The Threat Working Group is responsible for identifying foreign, domestic, and local threats and informing the installation commanding officer of current threat trends in the area of responsibility.
Which of the following is defined as defensive measures used to reduce the vulnerability of individuals and property to terrorist attacks, to include limited response and containment?
Physical Security Plan
Which threat level signifies anti-U.S. terrorists are operationally active and use large casualty-producing attacks as their preferred method of operation?
Select ALL the correct responses. Which of the following represent the purpose of physical security?
Prevent theft, damage, or unauthorized access to assets
Safeguard against threats
Who is responsible for providing information on the capabilities, intentions, and threats of adversaries associated with foreign intelligence entities?
CI Support Personnel
The ______________________ is a comprehensive written plan for appropriate and economical use of personnel and equipment to prevent or minimize criminal and disruptive activities.
Monthly Action Plan
Which of the following is conducted by a senior official to ensure regulatory requirements are being met and include assist visits, command inspections, and Inspector General (IG) inspections?
_____________ have reinforced concrete on all walls, ceilings, and floors and hardened steel doors.
GSA-approved security containers can be used to store classified information, weapons, and sensitive items.
Who is responsible for managing the installation or facility antiterrorism program and using defensive measures to reduce vulnerability of individuals and property from terrorist attacks?
Select ALL the correct responses. Which of the following is an exterior intrusion detection system (IDS)?
Fence disturbance sensors
Buried line sensors that detect vibrations
_______________________ is the most common protective lighting system, consisting of a series of fixed lights arranged to flood an area with overlapping cones of light.
Security systems such as intrusion detection systems (IDS) and closed circuit television (CCTV) systems are countermeasures.
Which type of locks may be appropriate for safeguarding classified information?
Combination Locks such as a built-in electromechanical lock
Key-operated locks such as the high security padlock or mortise lock
Low security padlock
Select ALL the correct responses. Which of the following comprise the Mission Assurance Senior Steering Group?
Senior Executive Service
General or flag officers at the one and two-star levels
Which of the following statements best describes an example of point security?
Protection at an entry and exit location using guards
Protection of an entire area of the installation or facility by consolidating as many assets as possible.
Select ALL the correct responses. Which of the following are examples of security-in-depth, layering of physical security countermeasures?
Staff assist visits
Lighting and cameras
Fencing and guards
Select ALL the correct responses. Which of the following are types of inspections that can ensure compliance with the physical security plan?
Select ALL the correct responses. Which of the following are the weakest points in a building?
Air conditioning and ventilation units housed on roof tops
Interior doors made of wood or composite material
Windows that can shatter
The primary purpose of physical security is ____________ and protection.