40 Question quiz 24 (1001-1040)

1

Which of the following is true?

1

If the pseudo code below were a programming language ,how many tests are required to achieve 100% statement coverage?
1. If x=3 then
2. Display_messageX;
3. If y=2 then
4. Display_messageY;
5. Else
6. Display_messageZ;
7. Else
8. Display_messageZ;

1

In which order should tests be run?

1

A program validates a numeric field as follows:
Values less than 10 are rejected, values between 10 and 21 are accepted, values greater than or equal to 22 are rejected. Which of the following covers the MOST boundary values?

1

What is the important criterion in deciding what testing technique to use?

1

Which is not true-The black box tester

1

A number of critical bugs are fixed in software. All the bugs are in one module, related to reports. The test manager decides to do regression testing only on the reports module.

1

Which of the following statements contains a valid goal for a functional test set?

1

Which set of metrics can be used for monitoring of the test execution?

1

Which of the following can be root cause of a bug in a software product?
(I) The project had incomplete procedures for configuration management.
(II) The time schedule to develop a certain component was cut.
(III) the specification was unclear
(IV) Use of the code standard was not followed up
(V) The testers were not certified

1

The following list contains risks that have been identified for a software product to be developed. Which of these risks is an example of a product risk?

1

A test engineer is testing a Video Player (VCR), and logs the following report:
Title: Fast Forward stops after 2 minutes. It happens every time
Expected result: Fast forward continues till the end of the tape
Severity: High
Priority: Urgent
What important information did the engineer leave out?

1

Test data planning essentially includes

1

Functional testing is mostly

1

Component integration testing can be done

1

White Box Testing

1

Equivalence partitioning consists of various activities:

1

Static Analysis

1

In formal review, Rework: fixing defects found typically done by _________

1

The _________ may facilitate the testing of components or part of a system by simulation the environment in which the test object will run

1

Which testing technique do you prefer for the following situations?
1. Severe time pressure
2. Inadequate specification

1

Which of the following is false?

1

Which of the following is a form of functional testing?

1

Static analysis is best described as:

1

Which of the following statements about reviews is true?

1

A configuration management system would NOT normally provide:

1

Considering the following pseudo-code, calculate the MINIMUM number of test cases for statement coverage, and the MINIMUM number of test cases for decision coverage respectively.
READ A
READ B
READ C
IF C>A THEN
IF C>B THEN
PRINT "C must be smaller than at least one number"
ELSE
PRINT "Proceed to next stage"
ENDIF
ELSE
PRINT "B can be smaller than C"
ENDIF

1

Why are static testing and dynamic testing described as complementary?

1

In practice, which Life Cycle model may have more, fewer or different levels of development and testing, depending on the project and the software product. For example, there may be component integration testing after component testing, and system integration testing after system testing.

1

Entry criteria should address questions such as:
I. Are the necessary documentation, design and requirements information available that will allow testers to operate the system and judge correct behavior.
II. Is the test environment-lab, hardware, software and system administration support ready?
III. Those conditions and situations that must prevail in the testing process to allow testing to continue effectively and efficiently.
IV. Are the supporting utilities, accessories and prerequisites available in forms that testers can use

1

From the below given choices, which one is the Confidence testing

1

What should be taken into account to determine when to stop testing?
I. Technical risk
II. Business risk
III Project constraints
IV Product documentation

1

The following code segment contains a potential "divide by 0" error.
J=50
K=1
while (N>=10) and (N<=10) loop
M [K] = J/N
K = K + 1
N = N 1
end loop

Which of the following is the most effective way of detecting this error?

1

IEEE stands for:

1

What are good practices for testing within the development life cycle?

1

Postal rates for 'light letters' are 25p up to 10g, 35p up to 50g plus an extra 10p for each additional 25g up to 100g. Which test inputs (in grams) would be selected using equivalence partitioning?

1

Which of the following would structure-based test design techniques be most likely to be applied to?
1. Boundaries between mortgage interest rate bands.
2. An invalid transition between two different arrears statuses.
3. The business process flow for mortgage approval.
4. Control flow of the program to calculate repayments.

1

Which of the following is the most important difference between the metrics-based approach and the expert-based approach to test estimation?

1

Which of these statements about functional testing is true?

1

How is the scope of maintenance testing assessed?

Quiz on 40 Question quiz 24 (1001-1040), created by Daniel Neag on 11/12/2017.

40 Question quiz 24 (1001-1040)

Which of the following is true?

If the pseudo code below were a programming language ,how many tests are required to achieve 100% statement coverage? 1. If x=3 then 2. Display_messageX; 3. If y=2 then 4. Display_messageY; 5. Else 6. Display_messageZ; 7. Else 8. Display_messageZ;

In which order should tests be run?

A program validates a numeric field as follows: Values less than 10 are rejected, values between 10 and 21 are accepted, values greater than or equal to 22 are rejected. Which of the following covers the MOST boundary values?

What is the important criterion in deciding what testing technique to use?

Which is not true-The black box tester

A number of critical bugs are fixed in software. All the bugs are in one module, related to reports. The test manager decides to do regression testing only on the reports module.

Which of the following statements contains a valid goal for a functional test set?

Which set of metrics can be used for monitoring of the test execution?

The following list contains risks that have been identified for a software product to be developed. Which of these risks is an example of a product risk?

A test engineer is testing a Video Player (VCR), and logs the following report: Title: Fast Forward stops after 2 minutes. It happens every time Expected result: Fast forward continues till the end of the tape Severity: High Priority: Urgent What important information did the engineer leave out?

Test data planning essentially includes

Functional testing is mostly

Component integration testing can be done

White Box Testing

Equivalence partitioning consists of various activities:

Static Analysis

In formal review, Rework: fixing defects found typically done by _________

The _________ may facilitate the testing of components or part of a system by simulation the environment in which the test object will run

If the pseudo code below were a programming language ,how many tests are required to achieve 100% statement coverage?
1. If x=3 then
2. Display_messageX;
3. If y=2 then
4. Display_messageY;
5. Else
6. Display_messageZ;
7. Else
8. Display_messageZ;

A program validates a numeric field as follows:
Values less than 10 are rejected, values between 10 and 21 are accepted, values greater than or equal to 22 are rejected. Which of the following covers the MOST boundary values?

A test engineer is testing a Video Player (VCR), and logs the following report:
Title: Fast Forward stops after 2 minutes. It happens every time
Expected result: Fast forward continues till the end of the tape
Severity: High
Priority: Urgent
What important information did the engineer leave out?

Which testing technique do you prefer for the following situations?
1. Severe time pressure
2. Inadequate specification

What should be taken into account to determine when to stop testing?
I. Technical risk
II. Business risk
III Project constraints
IV Product documentation

The following code segment contains a potential "divide by 0" error.
J=50
K=1
while (N>=10) and (N<=10) loop
M [K] = J/N
K = K + 1
N = N 1
end loop

Which of the following is the most effective way of detecting this error?