Personal Test

Question 1 of 268

1

An administrator is planning a vSphere infrastructure with the following specific networking requirements:
• The ability to shape inbound (RX) traffic
 • Support for Private VLANs (PVLANs) • Support for LLDP (Link Layer Discovery Protocol)
What is the minimum vSphere Edition that will support these requirements?

Select one or more of the following:

Essentials Plus
Standard
Enterprise
Enterprise Plus

Explanation

Question 2 of 268

1

What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two)

Select one or more of the following:

Networks
Applications
Storage
Management

Explanation

Question 3 of 268

1

An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle.
Which two files should the administrator analyze to determine the cause of the failure? (Choose two)

Select one or more of the following:

Server\utils\logs\imsTrace.log
Server\utils\logs\install.txt
%TEMP%\utils\logs\vminst.log
%TEMP%\vminst.log

Explanation

Question 4 of 268

1

Which Single Sign-On deployment mode should an administrator use for two 5.x vCenter Servers configured with linked mode?

Select one or more of the following:

Basic Single Sign-On with vCenter Server Heartbeat
Multisite Single Sign-On
Basic Single Sign-On
Single Sign-On with Linked Mode

Explanation

Question 5 of 268

1

Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two)

Select one or more of the following:

Hyperthreading is disabled in the host's BIOS
The physical CPUs in the host are not multi-core
The number of CPUs meets or exceeds the maximum without hyperthreading
The physical CPUs in the host do not support hyperthreading

Explanation

Question 6 of 268

1

An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 5.0 and the administrator wants to upgrade to the latest version possible. The environment contains several ESXi 5.1 hosts.
Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two)

Select one or more of the following:

Upgrade the vSphere Distributed Switch to 5.5
Upgrade the ESXi 5.1 hosts to version 5.5, then upgrade the vSphere Distributed Switch to 5.5
Upgrade the vSphere Distributed Switch to 5.1
Upgrade the ESXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5

Explanation

Question 7 of 268

1

Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two)

Select one or more of the following:

LocalOS
OpenLDAP
NIS as an LDAP Server
VCMSDS

Explanation

Question 8 of 268

1

A small company wants to use VMware products for its production systems. The system administrator needs to recommend a solution that will deliver High Availability to the company's production applications.
What is the minimum vSphere offering that will support this requirement?

Select one or more of the following:

vSphere Essentials
vSphere Essentials Plus
vSphere Hypervisor
vSphere Standard

Explanation

Question 9 of 268

1

A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost?

Select one or more of the following:

vSphere Hypervisor
vSphere Essentials
VMware Player 
VMware Workstation

Explanation

Question 10 of 268

1

An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day.
What is the most appropriate first step the administrator should take to resolve this issue?

Select one or more of the following:

Verify the web browser being used has Adobe Flash plugin version 11.5 or later
Verify the vCenter Single Sign-On service is running on the vCenter Server
Verify the vSphere Web Server service is running on the vCenter Server
Verify the administrator has permissions configured in vCenter Server

Explanation

Question 11 of 268

1

What is a valid plug-in status for a plug-in that has been added to a vSphere client?

Select one or more of the following:

Disabled
Unknown
Stopped
Installed

Explanation

Question 12 of 268

1

An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements:
• A web browser will be utilized to manage the vSphere environment.
 • 16 ESXi hosts will be deployed. • Licenses must be shared with a vCenter Server at another site.
 • An external Oracle 10g database server will be used to host the vCenter Server database.
Why will the administrator need to deploy vCenter Server on a Windows server?

Select one or more of the following:

Linked Mode is a requirement for the solution
Oracle 10g is a requirement for the solution
The vSphere web client is a requirement for the solution
Management of more than 5 hosts is a requirement for the solution

Explanation

Question 13 of 268

1

Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI).
What is the most likely explanation?

Select one or more of the following:

The host has not yet been added to a vCenter Server
The BIOS on the host does not have NX/XD enabled
The ESXi host is running in evaluation mode
The host requires a reboot before this feature is available

Explanation

Question 14 of 268

1

During the installation of ESXi 5.5, the following error message is reported:
Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS.
Which condition would generate this message?

Select one or more of the following:

LAHF/SAHF is not enabled in the BIOS
NX/XD is not enabled in the BIOS. C. SSE3 is not enabled in the BIOS
Hyperthreading is not enabled in the BIOS
SSE3 is not enabled in the BIOS

Explanation

Question 15 of 268

1

During an upgrade, the ESXi 5.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5.
Which option should be chosen to meet this requirement?

Select one or more of the following:

Upgrade ESXi and preserve the VMFS datastore
Install ESXi and preserve the VMFS datastore
Install ESXi and overwrite the VMFS datastore
Upgrade ESXi and overwrite the VMFS datastore

Explanation

Question 16 of 268

1

What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?

Select one or more of the following:

Users remain logged in and can run commands, except to disable lockdown mode
Users remain logged in and can run commands, including disabling lockdown mode
Users are immediately logged out of ESXi Shell
Users are logged out after a timeout specified by the vSphere administrator

Explanation

Question 17 of 268

1

The vSphere administrator attempts to connect to an ESXi host via an SSH client and receives the following security alert:
The vSphere administrator needs to determine whether the RSA key fingerprint shown in the security alert is the fingerprint of the intended ESXi host.
Which tool should the vSphere administrator use?

Select one or more of the following:

Direct Console User Interface
vSphere Client 
vSphere Web Client
vSphere Management Assistant

Explanation

Question 18 of 268

1

The vSphere administrator is configuring directory services for an ESXi host:
What should the vSphere administrator do to configure the host to use CAM services?

Select one or more of the following:

Check the Use vSphere Authentication Proxy checkbox
Set Select Directory Service Type to CAM services
Specify CAM$ for the Domain
Set Trusted Domains to cam\name.tld where name.tld is the domain that the host is joining

Explanation

Question 19 of 268

1

An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease?

Select one or more of the following:

Restart Management Network
Restore Network Settings
Test Management Network
Configure Management Network

Explanation

Question 20 of 268

1

An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease?

Select one or more of the following:

Restart Management Network
Restore Network Settings
Test Management Network
Configure Management Network

Explanation

Question 21 of 268

1

To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.
What should the administrator do to meet the requirement?

Select one or more of the following:

Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10

Explanation

Question 22 of 268

1

As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two)

Select one or more of the following:

Schedule a Replication Task on the primary instance
Select the first instance during the installation of subsequent instances
During the installation of each instance choose Linked-Mode
Enable Synchronize to Active Directory on each instance

Explanation

Question 23 of 268

1

Which statement is true regarding the licensing of vCenter Server?

Select one or more of the following:

The license for vCenter Server must be provided at the time of installation
Changing the license assigned to vCenter Server requires a restart of the vCenter Server service
Virtual machines can still be powered on if the vCenter Server license expire
Licensing for a single vCenter Server installation is determined by the number of managed virtual machines

Explanation

Question 24 of 268

1

A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features.
Which edition of vSphere provides similar functionality to evaluation mode?

Select one or more of the following:

Enterprise Plus
Enterprise
Standard
Essentials

Explanation

Question 25 of 268

1

An administrator is re-provisioning an ESXi host and moving it to another datacenter.
Which DCUI option should the administrator use to revert the system configuration to the default settings?

Select one or more of the following:

Reset System Configuration 
Rebuild Default System Configuration
Revert System Configuration
Renew Default System Configuration

Explanation

Question 26 of 268

1

An administrator is preparing to install an additional Single Sign-On node on a stand-alone server. What information is required during the installation routine?

Select one or more of the following:

Active Directory domain name and credentials
System DSN 
Lookup Service URL
Partner Host Name

Explanation

Question 27 of 268

1

Which Web service is installed during the vCenter Server installation?

Select one or more of the following:

Internet Information Service (IIS)
WEBrick
Tomcat Web server
LiteSpeed Web server

Explanation

Question 28 of 268

1

A large aerospace company utilizes a mission critical application requiring a large database server with 16 vCPUs and 500GB of RAM. Because of the critical nature of the application, the company also wants to leverage Reliable Memory Technology.
What is the minimum edition of vSphere that will support this scenario?

Select one or more of the following:

vSphere Standard Edition
vSphere with Operations Management Standard Edition
vSphere Enterprise Edition
vSphere with Operations Management Enterprise Edition

Explanation

Question 29 of 268

1

A large medical institution needs to centralize malware and anti-virus scanning in its environment. Which vSphere component will satisfy this requirement?

Select one or more of the following:

vShield Endpoint 
vCloud Network and Security
vSphere Data Protection Advanced
vCenter Operations Manager

Explanation

Question 30 of 268

1

An administrator is setting up a new vSphere environment for application development with health monitoring and capacity management. The administrator has purchased three servers for the initial install. The administrator is NOT planning to grow the environment and needs to keep costs as low as possible.
Which vSphere kit should the administrator use to meet these requirements?

Select one or more of the following:

vSphere Essentials Kit
vSphere Essentials Plus Kit
vSphere with Operations Management Standard Acceleration Kit
vSphere with Operations Management Enterprise Acceleration Kit

Explanation

Question 31 of 268

1

What is the correct order to install vCenter Server 5.x components?

Select one or more of the following:

vCenter Single Sign-On, Inventory Service, vCenter Server
vCenter Server, vCenter Single Sign-On, Inventory Service
vCenter Server, Inventory Service, vCenter Single Sign-On
vCenter Single Sign-On, vCenter Server, Inventory Service

Explanation

Question 32 of 268

1

An administrator needs to continue using ESXi after the 60-day evaluation period expires. The administrator has obtained a valid license from VMware.
Which step must the administrator take to deploy the license?

Select one or more of the following:

Add the license to the ESXi host
Perform an in-place upgrade of the free vSphere Hypervisor to the paid version
Add the ESXi host to a licensed vCenter Server
Re-install the host with standard ESXi and the obtained license

Explanation

Question 33 of 268

1

How should a vSphere administrator disable memory compression?

Select one or more of the following:

Attach a vSphere Client to an ESXi host and edit the Mem.MemZipEnable advanced setting
Connect to vCenter Server using the vSphere Client and edit the virtual machine. Insert the Mem.MemZipDisable option and set the value to True
Connect a vSphere Client to vCenter Server and configure the Memory Compression setting from the Administration menu
Reboot the ESXi host and disable memory compression in the BIOS under Advanced Settings

Explanation

Question 34 of 268

1

Which installation method is not available for a new deployment of ESXi 5.x?

Select one or more of the following:

Update Manager installation
Text-based interactive installation
Scripted installation
Auto Deploy installation

Explanation

Question 35 of 268

1

The oncall system administrator has made a change on the ESXi host requiring a restart of the management network. Lockdown mode is enabled.
Which action should the administrator take to restart the management network?

Select one or more of the following:

Use the vSphere client to enable local authentication services, then logon directly to the ESXi Shell and run services mgmt-vmware restart
Use an SSH client to logon to the command line and run services mgmt-vmware restart
Use the vSphere client to enable the DCUI and then logon to the ESXi Shell and use the menu to restart the management network
Logon directly to the DCUI and use the menu to restart the management network

Explanation

Question 36 of 268

1

An administrator is attempting to use Update Manager to patch a cluster of ESXi 5.x hosts.
The administrator needs to stage the patches for a scheduled update after hours. When verifying the hosts after the scheduled upgrade, the administrator determines that one of the hosts was not remediated and patches are not staged. The host is using PXE as its boot method.
What condition would cause this behavior?

Select one or more of the following:

The host was rebooted prior to the scheduled remediation
Remediating PXE-booted hosts using Update Manager is unsupported
The user account used does NOT have the Remediate Hosts privilege
The RAMdisk on the host has insufficient capacity

Explanation

Question 37 of 268

1

Which VLAN configuration requires switch connectivity defined as an access port?

Select one or more of the following:

Private VLAN
External Switch Tagging
Virtual Guest Tagging
Virtual Switch Tagging

Explanation

Question 38 of 268

1

An administrator determines that traffic shaping does not appear to be working on Production, a virtual machine port group on vSwitch1. Traffic shaping is working on all other port groups on the switch.
The administrator examines the Traffic Shaping settings as shown in the exhibit:
What should the administrator do to resolve the problem?

Select one or more of the following:

Select the Status checkbox to enable Traffic Shaping on the portgroup
Reduce the Average Bandwidth to 50% of the Peak Bandwidth
Reduce the Burst Size to 50% of the Peak Bandwidth
Click the Security tab and create the necessary security exception

Explanation

Question 39 of 268

1

The vSphere administrator needs to remove the Production virtual machine port group from an ESXi host. The ESXi host's Networking Configuration tab is shown in the exhibit.
After disconnecting the Fileserver02 VM, what step does the administrator need to take, assuming that vSwitch1 will still be needed for further configuration?

Select one or more of the following:

Remove the Production port group by accessing the properties for the port group
Remove the Production port group by accessing the properties for vSwitch1
Remove the Production port group by accessing the properties for the Network
Remove the Production port group by removing vSwitch1

Explanation

Question 40 of 268

1

A vSphere Standard Switch is configured with two uplinks.
When adjusting the failover order of the uplinks, what are two valid states in which an administrator can place the uplinks? (Choose two)

Select one or more of the following:

Active
Unused
Passive
Disabled

Explanation

Question 41 of 268

1

An administrator determines that a vSphere Standard Switch is dropping all inbound frames to a specific virtual machine. The behavior appeared in the last two days. Which configuration setting, if changed during this timeframe, would result in this behavior?

Select one or more of the following:

MAC address changes
Forged Transmit
Traffic Shaping
Jumbo Frames

Explanation

Question 42 of 268

1

Which two network settings are available on a vSphere Standard Switch? (Choose two)

Select one or more of the following:

Ingress traffic shaping
Egress traffic shaping
Private Virtual Local Area Networks (PVLAN)
Virtual Local Area Networks (VLAN)

Explanation

Question 43 of 268

1

A security team is validating policy settings in a vSphere environment. By default, which security policy is set to reject on a vSphere Standard Switch?

Select one or more of the following:

Promiscuous mode
MAC address changes
Forged transmit
Use explicit failover

Explanation

Question 44 of 268

1

A vSphere administrator upgrades a version 5.1.0 vSphere Distributed Switch to version 5.5.0. Another vSphere administrator, unaware of this change, tries to add an ESXi version 5.1.0 host to the switch and fails.
What is causing this addition of the ESXi host to fail?

Select one or more of the following:

The upgraded switch supports version 5.5 ESXi hosts only
The upgraded switch must be set up for backwards compatibility
The switch failed to upgrade properly
A version 5.5 ESXi host must be added to the switch before the 5.1 host.

Explanation

Question 45 of 268

1

A vSphere administrator creates a new vSphere Distributed Switch. The administrator receives notice from the service desk that a cluster of vSphere hosts has disconnected from vCenter Server. This disconnect occurred immediately after the new switch was created.
• This vSphere Distributed Switch is the only distributed switch managed by vCenter. 
• The virtual machines are still functional and the applications are still accessible by end users.
On the ESXi hosts, which step must the vSphere administrator take to allow vCenter Server to reconnect?

Select one or more of the following:

Use the Direct Console User Interface to reattach the management vmnic to the appropriate switch
Use the Direct Console User Interface to disable lockdown mode on each affected host
Use the ESXi Shell to restart the mgmt-vmware service on each affected host
Use the ESXi Shell to restart the vSphere Web Client service on each affected host

Explanation

Question 46 of 268

1

A vSphere administrator is administering a vSphere Distributed Switch port group using the vSphere Web Client. The port group was configured using Static binding, but the number of ports must increase as virtual machines are added to the port group.
Which port allocation setting should the administrator use to achieve this goal?

Select one or more of the following:

Elastic
Dynamic
Fixed
Manual

Explanation

Question 47 of 268

1

An administrator is deploying vSphere 5.5. The administrator creates a vSphere Distributed Switch, then uses Auto Deploy to deploy several ESXi hosts. After the hosts are deployed, the administrator notices that LACP packets are not being sent between them.
Which condition would cause this issue to occur?

Select one or more of the following:

The LACP support settings do not exist in the Host Profile
The LACP installation bundle is not included in the Image Profile
The LACP setting is not enabled on vCenter Server
LACP has not been configured on the Auto Deploy server

Explanation

Question 48 of 268

1

A virtual machine is receiving a large number of network packets, which is affecting the performance of other virtual machines connected to the same virtual network.
What should the vSphere administrator do to resolve the issue?

Select one or more of the following:

Migrate the virtual machine to a standard switch that has been configured for ingress traffic shaping
Configure the distributed switch to which the virtual machine is connected for ingress traffic shaping
Migrate the virtual machine to a different port group on the same distributed switch
Enable Network I/O Control on the standard switch to which the virtual machine is connected

Explanation

Question 49 of 268

1

A system administrator has an application installed on a physical machine that is licensed to the MAC address of the physical NIC. This system needs to be virtualized.
What two methods could an administrator use to ensure the license will function in the virtual machine? (Choose two)

Select one or more of the following:

Manually set the MAC address for the vNIC in the guest OS 
Install the NIC from the physical server into the ESXi host
Manually set the MAC address for the vNIC using the Web Client
Configure the physical server's MAC address in the virtual switch

Explanation

Question 50 of 268

1

A vSphere administrator assigns VLAN 3389 to the Production port group on the VCP_DCV_Example vSphere Distributed Switch. After the change, users report a loss of connectivity to their applications. Further analysis provides the following data:
• The cluster has not had a ESXi host failure. 
• Application functioned normally prior to the change. 
• The loss of connectivity occurred immediately following the change.
Which condition would cause this loss of connectivity?

Select one or more of the following:

The physical switch ports used by the vmnics have not been configured with 802.1Q
Maintenance Mode was initiated on one of the hosts in the cluster. Connectivity will resume after the virtual machines are migrated
All uplinks were removed from the VCP_DCV_Example switch and added to another virtual switch
A load balancing setting on the port group conflicts with the load balancing setting of the switch

Explanation

Question 51 of 268

1

Why would an administrator be unable to locate an IP address for a vSphere vmnic uplink?

Select one or more of the following:

IP addresses are defined at the virtual nic level, not the vmnic level
ESXi host vmnics communicate with physical switches on layer
ESXi hosts use NAT translation to mask the actual vmnic IP address
The IP address of the vmnic is not shown in the vSphere Client

Explanation

Question 52 of 268

1

A network auditing team has observed activity from a virtual machine that may be an organization policy security breach. The vSphere administrator needs to stop network traffic from the virtual machine.
Which step should the administrator take?

Select one or more of the following:

Enable Port Blocking on the vSphere Standard Switches in the organization and block the port on which the virtual machine is connected
Enable Port Blocking on each vSphere Standard Switch portgroup in the organization, then block the port on which the virtual machine is connected
Enable Port Blocking on each vSphere Distributed Switch portgroup in the organization, then block the port on which the virtual machine is connected
Enable Port Blocking on the vSphere Distributed Switches in the organization and block the port on which the virtual machine is connected

Explanation

Question 53 of 268

1

An application administrator reports application slowness when loading the application's web portal. The virtual machine is currently connected to a vSphere Distributed Switch. The application owner requests information about the virtual machine's network traffic.
Which feature of a vSphere Distributed Switch should the administrator use to gather the needed information?

Select one or more of the following:

NetFlow
Port Mirroring
Network I/O Control
Promiscuous Mode

Explanation

Question 54 of 268

1

Why is the network configuration shown in the exhibit impossible?

Select one or more of the following:

A single vmnic cannot be shared by two virtual switches
The MAC address of the Management Network VMkernel port is invalid
Virtual machines are not allowed to run on the same virtual machine port group as the vCenter Server Virtual Appliance
Virtual Machine Port Groups and VMkernel Ports are not allowed on the same virtual switch

Explanation

Question 55 of 268

1

An administrator is unable to configure Receive Side Scaling on the vmnic driver in a Windows 2008 R2 guest.
Based on the exhibit, what would need to be modified to enable this option?

Select one or more of the following:

Manually configure a static MAC address
Enable DirectPath I/O
Ensure the vmnic is attached to the correct network
Change the adapter type to VMXNET3

Explanation

Question 56 of 268

1

Which setting, if NOT configured, will prevent network connectivity?

Select one or more of the following:

The network label must be supplied
The MAC address must be supplied
The device status must be set to Connected
The DirectPath I/O status must be Supported

Explanation

Question 57 of 268

1

A vSphere administrator has created a vSphere Standard Switch with one virtual machine port group and one physical uplink. The administrator needs to ensure that the virtual machines on this port group can communicate only with each other.
What should the administrator do?

Select one or more of the following:

Remove the physical uplink from the vSphere Standard Switch
Create a Private VLAN and apply it to the virtual machine port group on the vSphere Standard Switch
Enable Port Security on the vSphere Standard Switch
Enable the Fenced setting on the virtual machine port group

Explanation

Question 58 of 268

1

A vSphere administrator needs to add redundancy to an ESXi 5.x management network on a vSphere Standard Switch.
Which method should the administrator use to create redundant management networks?

Select one or more of the following:

Configure the management network vSwitch with two active uplinks
Configure an additional management portgroup on the same vSwitch
Create a second management network on a second vSwitch in the same subnet
Create a second management network on the same vSwitch in the same subnet

Explanation

Question 59 of 268

1

An administrator is building a new vSphere Standard Switch with two active uplinks. The physical switch ports for these uplinks are placed in an etherchannel.
Which load balancing policy should the administrator use to support the etherchannel configuration?

Select one or more of the following:

Route based on IP hash
Route based on the originating virtual port
Route based on source MAC hash
Route based on physical NIC load

Explanation

Question 60 of 268

1

Which two traffic types can be enabled on the VMkernel adapters of an ESXi 5.5 host using the vSphere Web Client? (Choose two)

Select one or more of the following:

Fault Tolerance Traffic
Virtual SAN Traffic
iSCSI Traffic 
Virtual Machine Traffic

Explanation

Question 61 of 268

1

An organization is designing a new vSphere cluster to support a new product implementation.
The following challenges have been identified by the vSphere administration team:
• The organization has the vSphere Enterprise License.
• The network team needs to gather virtual machine network statistics over a long period of time.
• The network team needs the ability to quickly assess virtual machine traffic in the event of an attack.
• The network team has previously had problems implementing manual etherchannel configurations on their physical switches, resulting in production outages.
• The new cluster's initial size is 15 hosts.
The organization is willing to upgrade to vSphere Enterprise Plus licensing if it addresses these challenges.
Which three features of a version 5.5 vSphere Distributed Switch would address these challenges? (Choose three)

Select one or more of the following:

LACP in Dynamic Mode
Port Mirroring
Network vMotion
Private VLANs
Network I/O Control

Explanation

Question 62 of 268

1

Users accessing the WinXP virtual machine shown in the exhibit report intermittent connectivity to the corporate network.
The configuration is as follows:
 • This virtual machine runs in a DRS/HA cluster of two ESXi hosts. 
• The VCP_DCV_Example vSphere Distributed Switch was recently created.
 • The WinXP virtual machine was recently migrated from another vSphere Distributed Switch.
• The WinXP virtual machine was able to connect prior to migration to this switch.
 • No changes to the VCP_DCV_Example switch have been made since creation.
Which step should the administrator take to resolve the WinXP virtual machine's intermittent connectivity to the corporate network?

Select one or more of the following:

Add the ESXi host to the switch where the virtual machine is currently running
Disable Port Blocking on the VCP_DCV_Example switch
Disable Port Blocking on the Production port group 
Enable Network I/O Control on the switch to better balance I/O

Explanation

Question 63 of 268

1

An administrator needs to deploy a vSphere solution containing a number of hosts and a vSphere Distributed Switch.
Which steps should the administrator take to accomplish this?

Select one or more of the following:

Create the vSphere Distributed Switch, deploy the ESXi hosts, and then add each host to the switch
Deploy the ESXi hosts, create an HA/DRS cluster containing the hosts, create the vSphere Distributed Switch, and then add the cluster to the switch
Create the vSphere Distributed Switch and as each ESXi host is deployed it will be automatically added to the switch
Deploy the ESXi hosts and then create the vSphere Distributed Switch on the hosts

Explanation

Question 64 of 268

1

An administrator is migrating 135 virtual machines from a vSphere Standard Switch to a vSphere Distributed switch. The migration reports an error and only some of the virtual machines are transferred.
What is causing the error to occur?

Select one or more of the following:

The vSphere Distributed Switch was created with a single, default port group. 
The switch has become disconnected from an ESXi host
The port group on the vSphere Distributed Switch was not configured with an Elastic port binding. 
The virtual machine that failed to transfer did not have a network adapter

Explanation

Question 65 of 268

1

An administrator needs to deploy several virtual machines. Storage contention between the virtual machines should be managed by the VMkernel. Some of the virtual machines will use MSCS and should be highly available across the ESXi 5.5 hosts.
Which two storage options meet these requirements? (Choose two)

Select one or more of the following:

iSCSI
NFS
Fibre Channel
vSAN

Explanation

Question 66 of 268

1

Which two precautions should a vSphere administrator take before increasing the size of a VMFS datastore? (Choose two)

Select one or more of the following:

Unmount the datastore
Perform a rescan to ensure that all hosts see the most current storage
Quiesce I/O on all disks involved
Shut down all virtual machines stored in the datastore

Explanation

Question 67 of 268

1

What action should the vSphere administrator take to allow for a new vApp to be created in the cluster?

Select one or more of the following:

Enable Distributed Resource Scheduling on the cluster
Create a Resource Pool in the cluster, and create the vApp in the Resource Pool
Enable High Availability on the cluster
Create a new Datacenter, and create the vApp in the new Datacenter

Explanation

Question 68 of 268

1

An administrator is installing ESXi on several hosts attached to iSCSI storage.
Why would the administrator detach the host from the IP storage network prior to installation?

Select one or more of the following:

It decreases the time the installer needs to search for available disk drives
It allows the installation of a generic VAAI component for IP storage
It prevents ESXi from installing vSphere Flash Cache to the IP storage
It is required when installing ESXi onto a physical server that utilizes IP storage

Explanation

Question 69 of 268

1

Which two statements are true regarding a new vSphere deployment that is using software FCoE boot from SAN? (Choose two)

Select one or more of the following:

Multi-pathing options must be configured by the vmkernel after boot
The adapter must support iBFT or UEFI
The adapter must support FBFT or FBPT
Multi-pathing options must be configured in the Boot ROM

Explanation

Question 70 of 268

1

What should an administrator do to configure multi-pathing using software iSCSI?

Select one or more of the following:

Bind the VMkernel ports to the software iSCSI initiator
Configure Zoning between the hosts and SAN switches
Configure NIC teaming on the associated uplinks
Ensure jumbo frames are enabled end-to-end

Explanation

Question 71 of 268

1

The current block size of a datastore in VMFS3 is 4MB. An administrator needs to upgrade the datastore to VMFS5 and wants to change it to 1MB block size.
Which action should the administrator take?

Select one or more of the following:

Upgrade the datastore to VMFS 5. Select the 1MB block size option during the upgrade
Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore, then delete the VMFS3 datastore
Upgrade the datastore to VMFS5. Use vmkfstools to change the block size on the upgraded datastore
Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore. Upgrade the virtual machine hardware on the migrated VMs, then delete the VMFS3 datastore

Explanation

Question 72 of 268

1

An administrator is creating a new VMFS volume and needs to make it available to all hosts within a datacenter using the Web Client.
What should the administrator scan for in order to meet this requirement?

Select one or more of the following:

New Storage Devices and LUNs
New Storage Devices and VMFS Volumes
New VMFS Volumes and Datastores 
New VMFS Volumes and LUNs

Explanation

Question 73 of 268

1

An administrator attempts to delete a Storage Policy and receives an error.
Which two object types, if assigned a Storage Policy, would prevent the Storage Policy from being deleted? (Choose two)

Select one or more of the following:

A virtual machine
A virtual disk
A datastore
A datastore cluster

Explanation

Question 74 of 268

1

An administrator has configured hardware acceleration for a Fibre Channel storage array. After a recent maintenance event, the administrator finds that cloning and migration operations are taking excessively long to complete.
Which two settings could cause hardware acceleration to become disabled? (Choose two)

Select one or more of the following:

VAAI Plugin Name = VMW_VAAIP_SYM
VAAI Plugin Name = VMW_VAAIP_NETAPP
VMFS3.HardwareAcceleratedLocking = 0
Datamover.HardwareAcceleratedInit = 0

Explanation

Question 75 of 268

1

A VMFS5 datastore shows several errors, which suggests file system corruption. Which tool could a vSphere administrator use to check the VMFS file system?

Select one or more of the following:

vSphere On-disk Metadata Analyzer (VOMA)
VMware Infrastructure Management Assistant (VIMA)
vSphere Storage APIs for Storage Awareness (VASA)
VMware vSphere Health Check Analyzer (VHCA)

Explanation

Question 76 of 268

1

A Windows Server 2008 virtual machine with the following configuration receives an Out of Space condition indicator:
• The virtual machine uses thin provisioned virtual disks. 
• The VMFS5 datastore on which the virtual machine's files reside is on a thin provisioned LUN.
• 30% of the VMFS datastore content is no longer needed. 
• The storage array supports VASA and VAAI.
Which action should the vSphere administrator take to resolve the Out of Space problem without requesting additional space on the storage array?

Select one or more of the following:

Delete unneeded files on the VMFS datastore and then use vmkfstools to reclaim deleted blocks
Delete unneeded files on the VMFS datastore, right-click the datastore in vSphere Web Client, and then select the Reclaim Deleted Blocks option
Delete some files from the guest OS and defrag its file system
Delete some files from the guest OS and use vmkfstools to reclaim the deleted blocks

Explanation

Question 77 of 268

1

What are two features provided by VMFS5? (Choose two)

Select one or more of the following:

Support for greater than 2TB storage devices for only VMFS and Physical RDMs
Support for up to 32 extents
Support for greater than 2TB storage devices for VMFS, Physical and Virtual RDMs
Support for up to 64 extents

Explanation

Question 78 of 268

1

During the installation of ESXi, a vmkernel interface can be configured with what capabilities?

Select one or more of the following:

Management traffic 
Management traffic and vMotion
Management traffic, vMotion and Fault Tolerance logging
Management traffic, vMotion, Fault Tolerance logging and IP storage

Explanation

Question 79 of 268

1

A server administrator reports that a virtual machine has displayed the following message twice in the past 12 months:
No boot device found
Which virtual machine boot option should the administrator configure to resolve this issue?

Select one or more of the following:

Failed Boot Recovery
Force BIOS Setup
Boot Delay
Network Boot Retry

Explanation

Question 80 of 268

1

An administrator is using vSphere Replication to replicate a number of virtual machines to a recovery site. The administrator plans on enabling Storage DRS on the production site, which is running vSphere 5.5. What changes must be made in order to support this configuration?

Select one or more of the following:

Storage DRS can be added to the existing configuration without any configuration changes
Disable Storage DRS on the virtual machines utilizing vSphere Replication
Change the Recovery Point Objective for the replicated virtual machines to support the additional synchronization time
Storage DRS cannot be used in conjunction with vSphere Replication

Explanation

Question 81 of 268

1

Which condition would prevent an administrator from unmounting a VMFS datastore?

Select one or more of the following:

The datastore is being managed by Storage DRS.
The datastore contains vCenter Server templates
The datastore is mounted by multiple hosts
The storage backing the datastore is detached

Explanation

Question 82 of 268

1

A system administrator needs to control the allocation of memory and CPU resources to an organization's Finance team. The vSphere environment is built on a single cluster of ESXi hosts.
Which feature can be used to accomplish this task?

Select one or more of the following:

Resource Pool Reservations
DRS set to Fully Automated
Virtual Machine Shares
DRS Virtual Machine Groups

Explanation

Question 83 of 268

1

An administrator is planning a new vSphere deployment using shared storage. The solution must support:
• vMotion
 • Storage vMotion
 • Fault Tolerant virtual machines
• VAAI primitives • RDM disks
Which storage type will meet these requirements?

Select one or more of the following:

CIFS
iSCSI
NFS
vSAN

Explanation

Question 84 of 268

1

Which information can the administrator use to identify iSCSI nodes?

Select one or more of the following:

MAC address
IQN
WWN
LUN ID

Explanation

Question 85 of 268

1

Which action should an administrator take to increase the size of a VMFS5 datastore from 2TB to 32TB?

Select one or more of the following:

Dynamically expand the original LUN and add a second share for the NFS datastore
Dynamically expand the original LUN and increase the size of the VMFS datastore
Dynamically expand the original LUN and add extents to the VMFS datastore
Dynamically expand the original LUN and add extents to the NFS datastore

Explanation

Question 86 of 268

1

A user has submitted a trouble ticket complaining that the email server VM has become very sluggish. After looking at the logs, the vSphere administrator suspects the iSCSI network is experiencing congestion.
What esxtop statistic should the administrator examine in order to validate that the guest OS is experiencing performance degradation?

Select one or more of the following:

GAVG/wr
%ACTV
PATH
PKTRXMUL/s

Explanation

Question 87 of 268

1

A new LUN has been created on an iSCSI array and assigned to an ESXi 5.x server . However, when the administrator logs in to the vSphere Web Client the LUN is not visible. Other LUNs on the iSCSI array are visible.
What should the administrator do to resolve this issue?

Select one or more of the following:

Rescan for the new storage device 
Ensure the LUN is zoned correctly
Add the new LUN to the Static Discovery list
Ensure the CHAP settings are correctly configured

Explanation

Question 88 of 268

1

A new LUN from an existing storage array is presented to a vSphere cluster. A vSphere administrator determines that the LUN is visible on all but one ESXi host in the cluster. The affected host is able to see existing LUNs presented from the same storage array.
What is the most likely cause?

Select one or more of the following:

LUN Masking is improperly configured on the storage array
The SAN fabric is improperly zoned.
The ESXi host has NOT been rebooted
The HBA in the host is incompatible with ESXi

Explanation

Question 89 of 268

1

An administrator has configured multi-pathing using an Fiber Channel array in an active-active configuration.
What is the expected behavior of an ESXi host when a failed preferred path becomes available using the Fixed path selection policy for this array type?

Select one or more of the following:

It automatically reverts to the preferred path
It continues using the current path until it is manually reverted
It resumes load balancing across all available paths
It reverts to the preferred path after the host has been restored and rebooted

Explanation

Question 90 of 268

1

An administrator is deploying vSphere using a NAS device as the shared storage system. The administrator has already created a VMkernel port, enabled the NFS client, and configured a mount point accessible to the hosts.
Which additional configuration is required before the datastore can be used to create virtual machines?

Select one or more of the following:

The ESXi hosts must have root access to the datastore
The NAS must support NFS version 4
Port binding must be configured on the VMkernel port
The MTU on the VMkernel port must be set to 9000

Explanation

Question 91 of 268

1

An administrator is considering using NPIV to assign WWNs to virtual machines. Virtual machine portability is a major concern.
Why would NPIV be inappropriate for this deployment?

Select one or more of the following:

Virtual machines using NPIV must use DirectPath I/O
Storage vMotion is not supported using NPIV
vMotion is not supported using NPIV
Enabling NPIV requires SR-IOV supported hardware

Explanation

Question 92 of 268

1

An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using the vSphere client. The administrator has configured discovery and performed a rescan operation, but the iSCSI target does NOT appear.
Which action should the administrator take for the target to appear in the vSphere client?

Select one or more of the following:

Configure appropriate CHAP authentication settings
Bind a VMkernel port to the iSCSI initiator
Configure Jumbo Frames prior to adding iSCSI targets
Enable iSCSI in a vSphere Distributed Switch configuration

Explanation

Question 93 of 268

1

Which field should an administrator add to a Virtual SAN Disk Group under the Device Backing settings to monitor the health of disks in the Disk Group?

Select one or more of the following:

Issue
Operational Status
Capacity
Transport Type

Explanation

Question 94 of 268

1

An administrator has created a Virtual SAN Cluster using Automatic Mode Disk Groups. There is very little storage space left in the cluster. The administrator has access to an iSCSI storage array.
Which approach should the administrator take to expand the Virtual SAN Cluster?

Select one or more of the following:

Add new hosts to the cluster with available local disks then click the Claim Disks icon in the Disk Management section under the Virtual SAN tab
Add new disks to the hosts in the cluster then click the Claim Disks icon in the Disk Management section under the Virtual SAN tab.
Add new hosts to the cluster with available local disk. No further action is required to claim the added storage
Provision new LUNs on the iSCSI storage and present one LUN to each host in the cluster. No further action is required to claim the added storage

Explanation

Question 95 of 268

1

A vSphere administrator needs to place an ESXi host in maintenance mode to replace a hardware component. This host is a member of a Virtual SAN cluster that uses Automatic Mode Disk Groups. Availability of virtual machines running on this host is critical. HA and DRS are enabled on the Virtual SAN Cluster. Otherwise, the Virtual SAN cluster uses default values.
Which action should the administrator take to automatically guarantee availability of virtual machines with the fastest migration time?

Select one or more of the following:

Select Enter Maintenance Mode and accept the default values
Select Enter Maintenance Mode and select Full Data Migration option
Select Enter Maintenance Mode and select No Data Migration option
Migrate the virtual machines to another host and datastore then select Enter Maintenance Mode

Explanation

Question 96 of 268

1

What is a characteristic of Virtual SAN?

Select one or more of the following:

It supports Virtual Machine Storage Policies
It supports multiple Virtual SAN clusters for each host
It supports native snapshots and SE Sparse disks
It supports storage attached through USB, Fibre Channel, or iSCSI

Explanation

Question 97 of 268

1

Which two steps can an administrator take to upgrade an existing VMFS2 datastore to VMFS5? (Choose two)

Select one or more of the following:

Attach the VMFS2 datastore to an ESX 3.x host and upgrade it to VMFS3
Attach the VMFS2 datastore to the vSphere 5 host and upgrade it to VMFS3
Upgrade the datastore from VMFS3 to VMFS5 on a vSphere 5 host 
Upgrade the ESX host attached to the storage to vSphere 5

Explanation

Question 98 of 268

1

A customer needs to select an appropriate Path Selection Policy (PSP) for their storage array. There is no requirement for a preferred path. The policy should not select a new path unless the current one fails.
Which PSP meets the requirement?

Select one or more of the following:

Fixed
Round Robin
Most Recently Used
Asymmetric Logical Unit Access

Explanation

Question 99 of 268

1

Which controller is recommended for high disk I/O workloads?

Select one or more of the following:

BusLogic Parallel
LSI Logic Parallel
LSI Logic SAS
VMware Paravirtual

Explanation

Question 100 of 268

1

An administrator needs to migrate a company's physical servers to virtual servers and deploy into the ESXi 5.x cluster. During the process of converting to a virtual machine, the administrator needs to reduce the size of the disks.
Which method should the administrator use to meet this requirement?

Select one or more of the following:

Use VMware Converter hot cloning with volume-based cloning at the file level
Shut down the physical server and use VMware Converter cold cloning with volume-based cloning at the block level
Use VMware Converter hot cloning with volume-based cloning at the block level 
Shut down the physical server and use VMware Converter cold cloning with volume-based cloning at the file level

Explanation

Question 101 of 268

1

Which steps should an administrator take to migrate existing ESXi 5.x virtual machines to a storage over-subscription model?

Select one or more of the following:

Right-click the .vmdk file, and click Deflate
Right-click the .vmdk file, and click Compress
Right-click the virtual machine, click Migrate, select the same datastore, and select Thin Provision
Right-click the virtual machine, click Migrate, select a different datastore, and select Thin Provision

Explanation

Question 102 of 268

1

An administrator needs to create and provision new virtual machines from a master image that can not be edited or powered on.
Which type of resource is most appropriate for the administrator to perform the task?

Select one or more of the following:

Full Clone
Linked Clone
Template
Snapshot

Explanation

Question 103 of 268

1

What is the minimum virtual machine compatibility setting required for a virtual machine to run on a vSphere 5.5 host?

Select one or more of the following:

ESXi 5.1 and later
ESXi 3.0 and later
ESXi 4.1 and later
ESXi 3.5 and later

Explanation

Question 104 of 268

1

To avoid unnecessary planned downtime, what is the minimum version of VMware Tools that, if installed, will decrease the need for virtual machine reboots following VMware Tools upgrades?

Select one or more of the following:

5.5
5.1
5.0
4.1

Explanation

Question 105 of 268

1

Which feature requires an administrator to configure an RDM with Virtual Compatibility Mode?

Select one or more of the following:

vMotion
Virtual Machine Snapshots
High Availability
N-port ID Virtualization

Explanation

Question 106 of 268

1

A virtual machine has the following configuration: • Thin provisioned virtual disks • The VMFS datastore on which it resides is on a thin provisioned LUN. • The storage array is VAAI-enabled.
What is the behavior of the virtual machine when it encounters an out-of-space condition?

Select one or more of the following:

It is suspended
It is gracefully shut down
It is powered off
It is converted to space-efficient sparse

Explanation

Question 107 of 268

1

An administrator needs to use guest OS clustering in a vSphere environment that uses a Fibre Channel SAN. The clustering software does NOT have a SCSI target or a SCSI command pass- through requirement.
Which VMware storage type should the administrator use?

Select one or more of the following:

Physical RDM
VMFS
Virtual RDM
NFS

Explanation

Question 108 of 268

1

Which two CPU features enable the use of 64-bit virtual machines? (Choose two)

Select one or more of the following:

Intel VT 
NX/XD Bit
Hyper-threading
AMD RVI

Explanation

Question 109 of 268

1

An administrator is deploying a virtual machine from a template.
Assuming all of the inventory objects below exist in the implementation, what is the highest level in the vCenter Server hierarchy to which a virtual machine can be deployed?

Select one or more of the following:

Datacenter
Cluster
Resource Pool
Host

Explanation

Question 110 of 268

1

Which statement is accurate when choosing the storage controller for a virtual machine using the Create New Virtual Machine wizard in custom mode?

Select one or more of the following:

There is a predetermined controller based on the guest OS, which cannot be changed
A controller is recommended based on the guest OS type. The administrator can choose this controller or select any other
There is a predetermined controller based on the guest OS, which can only be changed after the virtual machine is deployed
The controller options presented will be based on the guest OS type. The administrator must choose one of these options

Explanation

Question 111 of 268

1

A VMware administrator needs to simplify the placement of virtual machines. The administrator also needs to balance I/O load and space utilization automatically.
Which combination of features should the administrator use to achieve this?

Select one or more of the following:

Create a Datastore Cluster and enable Storage DRS on the cluster
Create a Datastore Cluster and enable Storage I/O Control on each datastore
Enable Storage DRS and Storage I/O Control on each datastore
Enable Storage I/O Control on each datastore and configure Storage vMotion

Explanation

Question 112 of 268

1

An administrator is creating a vApp for a multi-tiered application and needs to configure custom startup actions for each virtual machine.
What should the administrator do to enable this functionality?

Select one or more of the following:

Verify that VMware Tools is installed on each virtual machine in the vApp
Ensure all virtual machines in the vApp are running hardware version 8 or later
Configure custom startup actions on the virtual machines, then add them to the vApp
Deploy a vSphere Management Assistant in the cluster and enable the vApp plug-in

Explanation

Question 113 of 268

1

A vSphere administrator is creating a vApp for a multi-tier application. Every time the vApp is started, the virtual machines perform a file system check.
Which action should the administrator take to resolve this issue?

Select one or more of the following:

Change the shutdown action in the vApp to Guest Shutdown
Change the shutdown action in the vApp to Graceful Shutdown
Change the shutdown action in the vApp to Graceful Power Off
Change the shutdown action in the vApp to Guest Power Off

Explanation

Question 114 of 268

1

An administrator needs to configure a Linux virtual machine template to support guest customization. The administrator has installed VMware Tools.
Which additional component is necessary to enable Linux guest OS customization?

Select one or more of the following:

Perl 
bash
Python
Sysprep

Explanation

Question 115 of 268

1

A VMware administrator needs to export a vApp and create a self-contained package that has a single file.
Which format should the administrator use?

Select one or more of the following:

Export as OVF
Export as OVA
Export as ZIP
Export as ISO

Explanation

Question 116 of 268

1

A vSphere administrator needs the ability to adjust the amount of guaranteed physical CPU and Memory resources to a virtual machine without incurring application downtime.
Which actions must the administrator perform?

Select one or more of the following:

Enable CPU hotplug and Memory hotplug on the virtual machine
Adjust the number of CPUs and the Memory Configuration for the virtual machine
Adjust the CPU reservation slider and click the Reserve all Guest Memory checkbox
Adjust the CPU and Memory reservation sliders on the virtual machine

Explanation

Question 117 of 268

1

Which database platform is embedded within the vApp architecture of vCenter Operations Manager?

Select one or more of the following:

MySQL
IBM DB2 Express
Oracle 11g Express
vPostgres

Explanation

Question 118 of 268

1

Why would a vSphere administrator configure resource shares for a virtual machine?

Select one or more of the following:

To prioritize access to a resource during contention
To guarantee access to a resource during contention
To prioritize access to a resource at all times
To guarantee access to a resource at all times

Explanation

Question 119 of 268

1

A vSphere administrator needs to add a CPU to a virtual machine, but upon editing the VM settings the option is grayed out.
What would explain this behavior?

Select one or more of the following:

The virtual machine is running
The virtual machine has been configured with a CPU limit
CPU Hot-add has not been enabled on the virtual machine
The virtual machine is in a resource pool with no available CPU resources

Explanation

Question 120 of 268

1

An administrator needs to provide a report that will help managers better understand how all of their virtual machines are sized.
Which report within vCenter Operations Manager should the administrator provide?

Select one or more of the following:

Undersized Virtual Machines Report
Configured Host or Cluster Capacity Report
Virtual Machine Capacity Overview Report
Virtual Machine Optimization Report

Explanation

Question 121 of 268

1

An administrator needs to provide a report that shows how many virtual machines can be added to an existing vSphere environment.
Which report within vCenter Operations Manager meets this requirement?

Select one or more of the following:

Cluster or Host Capacity Inventory Report
Configured Host Capacity Report
Virtual Machine Capacity Overview Report
Virtual Machine Optimization Report

Explanation

Question 122 of 268

1

An administrator needs to create an IP allocation policy for a multi-tiered application running in a vApp.
The IP addresses should be allocated automatically by vCenter Server, but should not be released even if a virtual machine is powered off.
Which IP allocation model should the administrator use for the vApp?

Select one or more of the following:

Static - Manual
Transient - IP Pool
DHCP
Static - IP Pool

Explanation

Question 123 of 268

1

Which information does the CPU Ready counter provide to a vSphere administrator?

Select one or more of the following:

The virtual machine has requested CPU time, but the VMkernel cannot schedule the virtual CPU on a physical CPU
The virtual machine is idle, and the VMkernel has idle physical CPU cycles
The virtual machine has requested CPU time, and the VMkernel has idle physical CPU cycles
The virtual machine is idle, but the VMkernel cannot schedule the virtual CPU on a physical CPU

Explanation

Question 124 of 268

1

Which VMware Tools upgrade method minimizes the need for scheduled downtime?

Select one or more of the following:

Use vCenter Server to select and upgrade virtual machines
Use vSphere PowerCLI and create a script to upgrade the virtual machines
Use Update Manager to perform an orchestrated upgrade of virtual machines
Configure the virtual machines to check for and install updates at each reboot cycle

Explanation

Question 125 of 268

1

Before upgrading from vCenter 4.x to 5.x, an administrator runs the vCenter Host Agent Pre- Upgrade Checker. The Checker reports an issue.
What would cause the vCenter Host Agent Pre-Upgrade Checker to report an issue?

Select one or more of the following:

The .NET framework 3.5 is installed
The host network card is only 1 Gbps
The file system is not intact
The VMFS file system is version 4.0.

Explanation

Question 126 of 268

1

An organization has a cluster of 6 ESXi hosts. Security policy requires that all administrative activity occurs through vCenter Server and not directly on the hosts.
Which action should a system administrator take to enforce this policy?

Select one or more of the following:

Use the vSphere client to right-click on the cluster and select Enable lockdown mode on the ESXi hosts in the cluster
Use the vSphere client to navigate to the Security Profile of each ESXi host and enable lockdown mode
Connect to the DCUI of each ESXi host and navigate the menus to the Troubleshooting Options and enable lockdown mode.
Connect to the ESXi shell on each host and type the command service lockdown start

Explanation

Question 127 of 268

1

An administrator needs to join several ESXi hosts in the environment to the corporate Active Directory instance. The container and path for the OU is Servers\VMware. The FQDN of the local Active Directory is CORP.AD.
Which option accurately shows the information an administrator would enter when configuring an ESXi host to join the domain and ensures the host is placed in the appropriate OU?

Select one or more of the following:

ldap://CORP.AD:389/Servers/VMware
CORP.AD/Servers/VMware 
cn=VMware, ou=Servers, dc=CORP, dc=AD
ou=VMware, ou=Servers, dc=CORP, dc=AD

Explanation

Question 128 of 268

1

An administrator needs to implement trusted SSL certificates for all vCenter 5.5 components.
Which component needs an SSL certificate?

Select one or more of the following:

Update Manager
Auto Deploy
ESXi Dump Collector 
Network Syslog Collector

Explanation

Question 129 of 268

1

A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtual machine is attached to a vSphere Standard Switch configured with several VLANs.
Which approach could the administrator use to configure the network to capture all traffic from the Linux virtual machine?

Select one or more of the following:

Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group containing the virtual machine.
Configure a vSphere Distributed Switch with VLAN Trunking. Create a port group and configure it with Promiscuous Mode. Connect the virtual machine to that port group
Configure the port group containing the virtual machine for Promiscuous Mode. Set the port group to use VLAN 1.
Configure a vSphere Distributed Switch with VLAN Trunking. Connect the virtual machine to the switch and enable Port Mirroring on the port group containing the virtual machine.

Explanation

Question 130 of 268

1

Which configuration will block communication between two virtual machines on the same DMZ network?

Select one or more of the following:

An isolated Private VLAN configured on a distributed switch and the two DMZ server virtual machines connected to the same port group
Two different port groups created on a distributed switch and 1 DMZ server virtual machine connected to each port group
Two different port groups created on a standard switch and 1 DMZ server virtual machine connected to each port group 
The security policy exception set to Reject for the switch to which the two DMZ server virtual machines will be connected

Explanation

Question 131 of 268

1

A vApp is performing poorly and an administrator determines that the memory resources are low. How should the administrator resolve this issue?

Select one or more of the following:

Configure a memory reservation for the vApp
Configure a memory reservation for each VM in the vApp
Rebuild the vApp using the wizard and assign memory reservations to the vApp
Rebuild the vApp using the wizard and assign memory reservations to each VM

Explanation

Question 132 of 268

1

An administrator needs to manage a virtual machine that cannot be accessed directly from an external network.
Which solution should the administrator choose?

Select one or more of the following:

Power off the virtual machine and use the vSphere Web Client to open a console to the virtual machine
Install the Client Integration Plug-in in the Web browser and open a console to the running virtual machine
Install the DCUI plug-in in the Web browser and open a console to the running virtual machine
Power off the virtual machine, install the Client Integration plug-in, and open a console to the virtual machine

Explanation

Question 133 of 268

1

A vSphere administrator deleted a vApp from disk. A second administrator needs the virtual machines that were contained in the vApp.
What should the first administrator do to make the virtual machines available?

Select one or more of the following:

Recover the virtual machines from backup
Add the virtual machines back into inventory
Undelete the vApp
Recover the virtual machines from Stranded Items

Explanation

Question 134 of 268

1

A vSphere Administrator has a multi-tier application deployed in a vApp. The administrator needs to rapidly deploy copies of the multi-tier application to various departmental infrastructures throughout the company. Which step should the administrator take using the vSphere Web Client to allow this?

Select one or more of the following:

Export the vApp as an OVF Template
Convert the vApp to a Template 
Clone the vApp to a OVF Template
Add the vApp to the Catalog

Explanation

Question 135 of 268

1

The bandwidth between two sites is too slow to transfer large virtual machine files. The administrator needs to export a virtual machine to OVF to reduce the size of the transfer. When the administrator attempts to initiate the Export OVF Template feature, the selection is grayed out.
What is the likely reason that the administrator is unable to select this option?

Select one or more of the following:

The virtual machine is in a powered on state
There is not enough disk space on the destination for the OVF
The administrator's account does not have the correct privileges
The virtual machine is not compatible with the OVF format

Explanation

Question 136 of 268

1

A system administrator is deploying a Windows virtual machine from a template and needs the IP address to be customized automatically.
How should the administrator configure the IP address?

Select one or more of the following:

Use the Microsoft Sysprep Tool.
Specify IP addresses using the Deploy Virtual Machine Wizard
Use the VMware Quickprep Tool.
Manually configure IP addresses after the deployment has completed

Explanation

Question 137 of 268

1

An administrator needs to establish that a database server is entitled to twice the CPU resources than a web server during CPU resource contention.
Which settings should the administrator change to accomplish this?

Select one or more of the following:

Set the database server's CPU Shares to High and leave the web server's CPU Shares at Normal
Set the database server's CPU Shares to High and change the web server's CPU Shares to Low
Set the database server's Shares to High and change the web server's CPU Shares value to a custom value of 500
Set the database server's Shares to a Custom value of 500 and leave the web server's CPU Shares at Normal

Explanation

Question 138 of 268

1

What should an administrator do to identify compliance for virtual machine storage performance?

Select one or more of the following:

Create a Storage Policy and apply it to the virtual machine
Create Storage Capabilities and apply one or more capabilities to the virtual machine
Create a Storage Policy and apply it to the datastore containing the virtual machine
Create Storage Capabilities and apply one or more capabilities to the datastore containing the virtual machine

Explanation

Question 139 of 268

1

A vSphere administrator determines that more metrics are available for viewing in the realtime view than are available in the daily view for a virtual machine
What is the reason for this discrepancy in the number of available metrics?

Select one or more of the following:

The daily view does not contain all of the metrics that the realtime view does
The default vCenter statistics level is being used
A vCenter statistics level of 4 is being used
The daily view presents a different selection of metrics by default than presented by the realtime view

Explanation

Question 140 of 268

1

A vSphere administrator enables Fault Tolerance on a powered off virtual machine that has the following configuration:
• The virtual machine's single thin provisioned virtual disk is sized at 100GB.
• The datastore that houses the virtual machine has 120GB of free space.
After Fault Tolerance has been configured, another administrator attempts to use Enhanced vMotion to move a 30GB virtual machine file into the same datastore and receives an error.
What condition could cause this behavior?

Select one or more of the following:

Fault Tolerance inflated the virtual machine's virtual disk file
Fault Tolerance created a temporary logging file on the same datastore
Fault Tolerance created a secondary copy of the virtual machine's virtual disk file.
The Fault Tolerance logging file ran out of disk space.

Explanation

Question 141 of 268

1

While testing a Fault Tolerance setup on a virtual machine, a system administrator notices that the DRS automation level of the virtual machine has been automatically set to Disabled.
The administrator needs to enable DRS to migrate the Fault Tolerance virtual machine to balance the cluster's CPU and memory loads. What should the administrator do?

Select one or more of the following:

Enable Enhanced vMotion Compatibility (EVC) in the vSphere cluster
Move the virtual machine to a VMFS 5 datastore built on shared storage
Manually change the DRS automation level of the virtual machine to Enabled
Move the secondary virtual machine to a host with a Fault Tolerance VMkernel port

Explanation

Question 142 of 268

1

A system administrator detects that a VDP Appliance that has been operational for 6 months has become inconsistent or unstable.
Which action should the administrator take to recover the VDP appliance and what will be the impact on the vSphere environment?

Select one or more of the following:

Perform a VDP rollback to the most recent validated checkpoint. All backup and configuration changes made after the checkpoint will be lost
Perform a VDP rollback to the most recent validated checkpoint. Configuration changes after the checkpoint will be lost, but backup data will remain intact
Restore a copy of the latest backup of the VDP appliance. All backup data and configuration changes after the backup was made will be lost
Restore a copy of the latest backup of the VDP appliance. All configuration changes after the backup was made will be lost, but backup data will remain intact.

Explanation

Question 143 of 268

1

Which two features are different between VDP and VDPA? (Choose two)

Select one or more of the following:

Support for guest level backups of SQL and Exchange
Ability to perform file level recovery
Virtual machines supported per appliance
Support for image level backups

Explanation

Question 144 of 268

1

An administrator must determine which Update Manager procedures can be performed using the vSphere Web Client, and which must be completed using the Windows vSphere client.
Which two tasks require the use of the Windows vSphere client? (Choose two)

Select one or more of the following:

Attach and detach baselines to inventory objects
Scan inventory objects for compliance
Create a baseline for an inventory object
Stage a baseline for remediation

Explanation

Question 145 of 268

1

A vSphere administrator needs to use vSphere Update Manager to perform orchestrated upgrades of virtual machines.
Which two options are available for virtual machine remediation? (Choose two)

Select one or more of the following:

Upgrade virtual machine hardware
Upgrade VMware tools 
Upgrade virtual machine appliances
Upgrade virtual machine guest OS

Explanation

Question 146 of 268

1

Which two are supported object types for Update Manager? (Choose two)

Select one or more of the following:

virtual appliances
templates
vApps
hosts

Explanation

Question 147 of 268

1

Which is the simplest baseline group combination an administrator could create to upgrade hosts, VMware tools, and virtual machine hardware to the latest versions using Update Manager?

Select one or more of the following:

One baseline group that contains the host upgrade baselines and one baseline group that contains the VM Hardware and VMware Tools upgrade baselines
One baseline group that contains the host upgrade and vCenter upgrade baselines
One baseline group that contains the host, VMware tools, and VM Hardware upgrade baselines
One baseline group that contains the Data Center upgrade baseline and one baseline group that contains the VM upgrade baseline

Explanation

Question 148 of 268

1

A vSphere administrator observes a problem with the Virtual SAN Cluster Setting as shown:
Which action should the administrator take on the vmkernel portgroup on all hosts used by Virtual SAN cluster to resolve this problem?

Select one or more of the following:

Select the Virtual SAN traffic option
Increase the MTU value
Change the DNS server address
Increase the Port Speed

Explanation

Question 149 of 268

1

Which statement is true about the hardware configuration for ESXi hosts participating in a virtual SAN?

Select one or more of the following:

The hosts must have identical hardware
Each host must have at least one Solid State Drive (SSD)
The hosts must have network attached storage
Each host must have a RAID Controller

Explanation

Question 150 of 268

1

An administrator has configured a vSphere 5.5 test environment to evaluate the Virtual SAN feature using Automatic Mode Disk Groups. The administrator needs to disable the Virtual SAN cluster while preserving the virtual machines running on that cluster.
The administrator has already installed a vSphere 5.5 Client on a Windows 7 desktop and also has access to the vSphere 5.5 Web Client.
What should the administrator do to disable the Virtual SAN?

Select one or more of the following:

Use Storage vMotion to migrate the virtual machines to another datastore then use the vSphere 5.5 Client to disable the Virtual SAN
Use Storage vMotion to migrate the virtual machines to another datastore then use the vSphere 5.5 Web Client to disable the Virtual SAN
Use the vSphere 5.5 Client to disable the Virtual SAN, which will automatically migrate the virtual machines via the Storage DRS feature
Use the vSphere 5.5 Web Client to disable the Virtual SAN, which will automatically migrate the virtual machines via the Storage DRS feature

Explanation

Question 151 of 268

1

A vSphere administrator has created a Virtual SAN Cluster with Automatic Mode Disk Groups. The cluster includes three ESXi hosts contributing one SSD and six SAS disks each. The administrator has four new ESXi hosts that boot from a fiber channel array and have no local disks attached. These four new hosts need additional shared storage but there is insufficient space on the fiber channel array. The hardware budget is limited.
What can the administrator do to provide the needed storage for the lowest cost?

Select one or more of the following:

Add the four new hosts to the Virtual SAN Cluster and use the existing storage in the cluster
Add an SAS RAID controller to each of the new hosts. Attach one SSD and six SAS disks to each RAID controller and then add the four hosts to the Virtual SAN cluster
Add the four new hosts to the Virtual SAN Cluster and contribute the fiber channel disks to the Virtual SAN
Add the four new hosts to the Virtual SAN Cluster and change to Manual Mode Disk Groups

Explanation

Question 152 of 268

1

A customer needs a datastore to be seen across multiple vSphere clusters with applications inside of the virtual machines that must detect the physical characteristics of the storage device.
Which type of virtual disk meets this requirement?

Select one or more of the following:

A virtual disk on a VMFS datastore
A raw device mapped disk in virtual compatibility mode
A raw device mapped disk in physical compatibility mode
A virtual disk on an NFS datastore

Explanation

Question 153 of 268

1

An administrator needs to prevent two virtual machines from running on the same host at any time.
Which DRS rule should the administrator apply?

Select one or more of the following:

vm-to-vm affinity
vm-to-host affinity
vm-to-vm anti-affinity
vm-to-host anti-affinity

Explanation

Question 154 of 268

1

A vSphere administrator needs to enable Distributed Resource Scheduling (DRS) in an existing vSphere environment:
• The environment contains a High Availability (HA) cluster with eight ESXi hosts.
• Six ESXi hosts are not in a cluster. • DRS should be used on as many hosts as possible. 
• Initial placement of virtual machines should be automatically performed.
• Migration recommendations should be provided, but not performed without approval.
Which procedure should the administrator perform to accomplish this task?

Select one or more of the following:

Select the datacenter and create a DRS cluster. Add the six remaining hosts to this cluster, then enable DRS. Edit the DRS settings and change the automation level to Partial
Select the existing HA cluster. Add the six remaining hosts to the cluster. Enable DRS, then edit the settings and change the automation level to Manual
Select the datacenter and create a DRS cluster. Add the six remaining hosts to this cluster, then enable DRS. Edit the DRS settings and change the automation level to Manual
Select the existing HA cluster. Add the six remaining hosts to the cluster. Enable DRS, then edit the settings and change the automation level to Partial.

Explanation

Question 155 of 268

1

An organization's wants to ensure that if a host in a High Availability (HA) cluster fails, critical virtual machines resume operation even if there are insufficient resources to continue to run all virtual machines in the cluster.
Which HA setting should be configured to ensure the cluster operates as expected?

Select one or more of the following:

VM restart priority
Admission Control policy
VM monitoring sensitivity
das.checkVmStateDelay

Explanation

Question 156 of 268

1

A vSphere administrator needs to reconfigure the Distributed Power Management (DPM) threshold to be more aggressive.
Where should the administrator edit the settings of DPM in the vSphere Web Client?

Select one or more of the following:

DPM plug-in settings
Cluster settings
ESXi host power settings
vCenter Service Status

Explanation

Question 157 of 268

1

An administrator has created a Virtual Flash Read Cache and needs to add a total 2TB of capacity to the cache. The administrator has a total of six SSD disks to add, but is unable to add one of the disks.
What is a likely cause of the problem?

Select one or more of the following:

The SSD device size is less than 256GB
The SSD device size is greater than 4TB
The SSD device is a local disk
The SSD device contains existing data

Explanation

Question 158 of 268

1

A DRS cluster has been created with the following specifications:
• All mission critical virtual machines are in the root resource pool.
• All other virtual machines are placed into two child pools based on medium or low priority.
• The two child pools contain adequate resources needed by the medium and low priority virtual machines.
• The two child pools are reserving 35% of the total available resources of the cluster.
What is the advantage of leaving the mission critical virtual machines in the root resource pool?

Select one or more of the following:

The root resource pool has immediate access to new physical resources added to the cluster
Virtual machines placed in the root resource pool have a higher vMotion priority in DRS
Transparent Memory Page Sharing in the root resource pool has a higher weight than in child pools
Virtual machines placed in the root resource pool have higher default share values

Explanation

Question 159 of 268

1

A vSphere administrator needs to temporarily disable DRS on a cluster containing a resource pool hierarchy.
Which procedure should the administrator follow to preserve the resource pool hierarchy while DRS is disabled?

Select one or more of the following:

Move the resource pool hierarchy out of the cluster prior to disabling DRS
Save the resource pool hierarchy to the administrator's local machine prior to disabling DRS
Backup the vCenter Server database and restore the database after re-enabling DRS.
Create a new cluster and move the resource pool hierarchy to the new cluster prior to disabling DRS

Explanation

Question 160 of 268

1

A vSphere administrator needs to migrate a virtual machine to another datastore and host without disrupting virtual machine users.
Which technique should the vSphere administrator use?

Select one or more of the following:

Enhanced vMotion
High Priority vMotion
Low Priority vMotion
Storage vMotion

Explanation

Question 161 of 268

1

A vSphere administrator needs to enable Fault Tolerance on a virtual machine.
When performing a Storage vMotion migration, which setting should the vSphere administrator change in the virtual machine's disk format to ensure it meets Fault Tolerance requirements?

Select one or more of the following:

Thick Provision Eager Zeroed
Thick Provision Lazy Zeroed
Thin Provisioned
Thin Provision Eager Zeroed

Explanation

Question 162 of 268

1

The vSphere administrator needs to migrate a virtual machine from one host to another. The virtual machine .vswp file resides in local storage.
Which two techniques can the administrator use to migrate the virtual machine? (Choose two)

Select one or more of the following:

vMotion migration
Cold migration
Storage vMotion migration
Enhanced vMotion migration

Explanation

Question 163 of 268

1

A customer needs to size a single backup appliance for backing up 3TB of data. There is no requirement for guest level backups of SQL and Exchange.
What is the minimum VMware Data Protection solution and sizing that would fulfill the stated requirements?

Select one or more of the following:

VMware Data Protection Advanced with a 4TB backup appliance
VMware Data Protection with a 4TB backup appliance
VMware Data Protection Advanced with a 3TB backup appliance
VMware Data Protection with a 3TB backup appliance

Explanation

Question 164 of 268

1

Which tool should an administrator use to modify vSphere Data Protection (VDP) backup jobs?

Select one or more of the following:

vSphere Web Client
vSphere Client using the VDP plugin
VAMI on the VDP Appliance
vSphere Management Appliance

Explanation

Question 165 of 268

1

An administrator needs to use vSphere Update Manager to perform orchestrated upgrades of ESXi hosts and virtual machines. The vSphere management components reside in a secure environment that does not have direct access to the Internet.
How would Update Manager be configured in this environment while maintaining the organization's security requirements?

Select one or more of the following:

Install Update Manager Download Service on a machine with Internet access and configure an export policy to the Update Manager server
Install Update Manager Secure Gateway on a machine in the DMZ and configure an IPsec tunnel to the internal Update Manager server
Create a TFTP server as an HTTP proxy and configure an export policy to the Update Manager server
Enable gateway services on the Update Manager server and provide Internet access to the gateway address

Explanation

Question 166 of 268

1

An administrator needs to use vSphere Update Manager for the initial deployment of VMware Tools on a group of newly created virtual machines.
When the administrator scans the objects for compliance, a compliance state of Incompatible is returned.
How should the administrator resolve the issue?

Select one or more of the following:

Install VMware Tools manually on the new virtual machines
Ensure the latest version of VMware Tools has been downloaded to the Update Manager repository
Enable the Upgrade VMware Tools on Power Cycle option
Create a separate baseline object for each guest OS type

Explanation

Question 167 of 268

1

An administrator needs to configure vFlash Read Cache to improve performance.
What would benefit the most from enabling vFlash Read Cache?

Select one or more of the following:

Virtual machines replicated with vSphere Replication
Web Server virtual machines
Database virtual machines 
Virtual machines migrated using Storage vMotion

Explanation

Question 168 of 268

1

A vSphere administrator manages a three host cluster with 20 VMs. The HA cluster is configured with the Host Failures the Cluster Tolerates admission control policy and all other settings are set to default values. The administrator determines that one of the VMs is not able to power on. After further inspection, it is determined that this VM cannot power on because of a very large CPU reservation.
Which cluster advanced HA setting can the administrator modify to enable the virtual machine to power on?

Select one or more of the following:

Lower das.vmcpumaxmhz attribute value
Higher das.vmcpuminmhz attribute value
Lower das.slotcpuoutmhz attribute value
Higher das.slotcpuinmhz attribute value

Explanation

Question 169 of 268

1

What two requirements must be met to create a fully automated Distributed Resource Scheduler (DRS) cluster? (Choose two)

Select one or more of the following:

Shared storage
Hosts with identical processor features
Storage vMotion
vMotion

Explanation

Question 170 of 268

1

A vSphere administrator created a Virtual SAN and a relevant virtual machine Storage Policy. The administrator is unable to select this virtual machine Storage Policy when creating a new virtual machine.
Based on the exhibit, why is the administrator unable to select this virtual machine Storage Policy?

Select one or more of the following:

The administrator did not enable the virtual machine Storage Policy per compute resource
The ESXi Host license does not support virtual machine Storage Policies
The vCenter Server license does not support virtual machine Storage Policies
The administrator did not create a storage policy for the datastore selected for the virtual machine

Explanation

Question 171 of 268

1

An administrator is planning a vSphere Fault Tolerance implementation for 6 virtual machines. Which two virtual disk types are supported with FT? (Choose two)

Select one or more of the following:

Raw Device Mapped LUN configured for Virtual Compatibility Mode
Raw Device Mapped LUN configured for Physical Compatibility Mode
Virtual disk thick provisioned, eager zeroed
Virtual disk thick provisioned, lazy zeroed

Explanation

Question 172 of 268

1

What is the purpose of configuring a VMkernel port for Fault Tolerance logging?

Select one or more of the following:

The selected vmkernel port is used to send external inputs from a primary virtual machine to its secondary counterpart
The selected vmkernel port is able to log Fault Tolerance events to a syslog server
The selected vmkernel port is used to trigger a failover from the primary machine if a hardware crash occurs
The selected vmkernel port is able to maintain a log of changes to the secondary virtual machine

Explanation

Question 173 of 268

1

A vSphere administrator is attempting to upgrade an ESXi host using vSphere Update Manager.
The administrator has attached the baseline and remediated the host. Update Manager reports the remediation process has completed successfully. However, upon inspection the host is not upgraded.
What is the most likely reason for this issue?

Select one or more of the following:

The ESXi host has less than 10MB free in its /tmp directory
The user performing the upgrade has insufficient privileges
The Update Manager service has not been configured with root level access to the host
The baseline has been configured using an invalid ISO image

Explanation

Question 174 of 268

1

The vSphere administrator needs to migrate a virtual machine from one ESXi 5.5 host to another ESXi 5.5 host. The virtual machine has a virtual disk that is stored in local storage.
Assuming only the vSphere Essentials licensing is in place, which technique should the administrator use to accomplish the migration?

Select one or more of the following:

vMotion migration
Cold migration
Enhanced vMotion migration
Storage vMotion migration

Explanation

Question 175 of 268

1

A host in a 4-node HA\DRS cluster has failed. HA initiates restart tasks for the virtual machines on the remaining hosts in the cluster but half of them fail to restart.
What is the likely reason virtual machines fail to restart?

Select one or more of the following:

HA admission control is blocking the restart of the virtual machines due to insufficient resources to support the configured failover level of the cluster
The vMotion network has failed on the remaining hosts preventing the virtual machines from migrating
Storage vMotion has failed on the datastore containing the virtual machines preventing them from migrating
The failed host was the Master host in the cluster and no other hosts are able to perform the necessary HA function to restart the virtual machines

Explanation

Question 176 of 268

1

An administrator needs to install vSphere Update Manager using an external SQL Server 2008 R2 database. The administrator has created the database successfully, but cannot establish connectivity when testing the DSN.
Which configuration setting could be causing the issue?

Select one or more of the following:

The database was configured to use Windows authentication
The DSN was configured using a 32-bit ODBC connection
Update Manager does not support the use of a remote database
Port 9087 is being blocked by Windows Firewall on the Update Manager server

Explanation

Question 177 of 268

1

When a vSphere administrator attempts to remediate a host with Update Manager, the host is unable to enter maintenance mode.
Which condition is likely preventing the host from entering maintenance mode?

Select one or more of the following:

A virtual machine on the host has a removable device connected
A virtual machine on the host is configured to use Fault Tolerance
A virtual machine is powered off and cannot be migrated to another host
A virtual machine is configured with a local .vswp file

Explanation

Question 178 of 268

1

Which two statements accurately describes step that are taken to recover a virtual machine using vSphere Replication? (Choose two)

Select one or more of the following:

A recovery is initiated from the target site
A recovery is initiated from the source site
Upon recovery, the virtual machine is automatically attached to it's configured network
Upon recovery, the virtual machine must be manually attached to a network

Explanation

Question 179 of 268

1

Which privilege should the administrator assign to allow a user to create baselines using Update Manager?

Select one or more of the following:

Manage baseline
Attach baseline
Stage baseline
Configure baseline

Explanation

Question 180 of 268

1

An administrator decreases the CPU share value for two virtual machines in a DRS cluster from 1000 to 100 shares. The DRS cluster contains more resources than both virtual machines can consume.
The characteristics of the virtual machines are listed below:
 • The second virtual machine is a clone of the first virtual machine.
• Both virtual machines are identical in every way. 
• Both virtual machines are not attached to the IP network.
 • Both virtual machines are powered on.
What impact on the virtual machines' performance will be observed?

Select one or more of the following:

The virtual machines will have equal performance under all conditions
The performance of the virtual machines will reduce by a factor of ten once the share value is adjusted
The virtual machines will have equal performance under normal conditions and reduced performance when contention occurs.
The original virtual machine will perform better than the clone when contention occurs

Explanation

Question 181 of 268

1

The administrator has deployed a third-party virtual appliance in the organization's vSphere environment and needs to use Update Manager to maintain the third-party appliance.
How should the administrator accomplish this task with the least administrative effort?

Select one or more of the following:

Add a new Download Source to Update Manager to obtain updates from the third party
Manually download the third-party updates to Update Manager, which will then apply them to the appliance
Obtain an update tool from the third party and use it to manage updates to the appliance
Identify the third-party appliance from the supported list within Update Manager

Explanation

Question 182 of 268

1

A vSphere administrator needs to add more space to an existing 3-node Virtual SAN cluster. The attempts to add the new host to the cluster as a contributing member have failed. However, it can be added as a non-contributing member.
The host was previously used in a single host configuration. The administrator recently upgraded the host from ESXi 5.1 to 5.5 prior to adding it to the cluster.
What is the reason for this failure?

Select one or more of the following:

The only SSD disk in the new host was formatted with a VMFS datastore
The new host has a 10Gbps NIC while the rest of the cluster members have 1Gbps NICs
The RAID controller in the new host does not have enough cache for the Virtual SAN datastore
The new host's VMFS datastores do not have sufficient capacity to be added as a contributing member

Explanation

Question 183 of 268

1

What is not a supported method for increasing the availability of a vCenter Server virtual machine?

Select one or more of the following:

vSphere High Availability
vSphere Fault Tolerance
vCenter Server Heartbeat
Site Recovery Manager

Explanation

Question 184 of 268

1

An administrator has deployed vSphere Data Protection and wants to configure several virtual machine backup jobs. When using the vSphere client on a Windows 7 desktop, the administrator notices that there is no icon for vSphere Data Protection in the Solutions and Applications area of the vSphere client.
What is the reason the administrator is unable to access vSphere Data Protection from the vSphere client on their desktop?

Select one or more of the following:

The vSphere Data Protection client plug-in is not installed on the administrator's desktop
Accessing vSphere Data Protection requires the use of the vSphere Web Client
The vSphere Data Protection plug-in is disabled in the vSphere Client on the administrator's desktop. 
The administrator's desktop does not have connectivity to the vSphere Data Protection virtual appliance.

Explanation

Question 185 of 268

1

An administrator needs to unmount a datastore that is also used for HA storage heartbeats.
What is the least disruptive method for an administrator to perform this activity on a slave HA host?

Select one or more of the following:

On the Datastore Heartbeating tab, unmount the datastore normally and confirm a new datastore has been selected
On the Datastore Heartbeating tab, specify an alternate datastore, then unmount the datastore normally
Disable HA datastore heartbeats, then unmount the datastore
Reduce the number of heartbeat datastores, then remove the datastore from the heartbeat list

Explanation

Question 186 of 268

1

When deploying two sibling resource pools (RP1 and RP2), an administrator needs to make all resources in RP1 available to virtual machines in RP2.
Which configuration should the administrator use to meet this requirement?

Select one or more of the following:

Set the Reservation of RP2 to 0
Set the Reservation of RP1 to 0
Set the Limit of RP1 to Unlimited
Set the Limit of RP2 to Unlimited

Explanation

Question 187 of 268

1

During a physical network reconfiguration, an ESXi host briefly lost connection to the management network. High Availability (HA) began powering off the virtual machines residing on the affected host to be restarted on an unaffected host in the cluster.
Which setting should the administrator configure to prevent this behavior in the future?

Select one or more of the following:

Host isolation response
Host monitoring
VM monitoring
Admission control

Explanation

Question 188 of 268

1

A vSphere administrator needs to increase the capacity of an existing Storage Distributed Resource Scheduler (SDRS) datastore cluster. The storage administrator has provisioned two new NFS datastores to be added to the cluster.
The vSphere administrator receives an error message, preventing the administrator from adding the newly provisioned datastores to the cluster.
What is the likely reason that the action failed?

Select one or more of the following:

There are virtual machines running on the datastores being added to the cluster
The datastores in the SDRS cluster are VMFS datastores
The datastores in the existing cluster have hardware acceleration enabled and the new datastores do not
The SDRS cluster has not been placed into maintenance mode

Explanation

Question 189 of 268

1

A Distributed Resource Scheduler (DRS) cluster is displaying a message that recommends the migration of virtual machines, even though the cluster is currently balanced.
What is the likely reason for this?

Select one or more of the following:

The DRS cluster does not satisfy the resource pool reservations
The DRS cluster is not configured with shared storage
The DRS cluster is in a critical state
The DRS cluster contains hosts with CPU compatibility issues.

Explanation

Question 190 of 268

1

Which workflow should the administrator follow to create a High Availability (HA) cluster?

Select one or more of the following:

Select a datacenter, create a cluster in the datacenter, add resources to the cluster, enable HA, and configure HA-specific settings
Select a resource pool, create an HA Cluster in the resource pool, add resources to the cluster, configure HA-specific settings, and enable HA
Select a datacenter, create an HA Cluster, add resources to the cluster, configure HA-specific settings, and enable HA 
Select a resource pool, create a cluster in the pool, add resources to the cluster, enable HA, and configure HA-specific settings

Explanation

Question 191 of 268

1

A vSphere administrator attempts to move a powered on virtual machine into a resource pool that is configured in an HA/DRS cluster. The operation fails.
What condition would cause this behavior?

Select one or more of the following:

HA admission control prevented the movement of the virtual machine due to insufficient resources
Resource pool admission control prevented the movement of the virtual machine due to insufficient resources
The virtual machine was not powered off before being moved into the resource pool
The virtual machine's hardware level did not match the level of the existing virtual machines in the resource pool

Explanation

Question 192 of 268

1

An administrator removes a virtual machine from a resource pool and places it in the DRS root resource pool. Users report the performance of the application running on the virtual machine has improved. The virtual machine relocation was the only change that occurred.
What explains the change in application performance?

Select one or more of the following:

The memory, storage, and/or CPU settings of the original resource pool restricted access to resources for the virtual machine
The configured memory, storage and/or CPU shares on the root resource pool are higher than the original resource pool
The memory, storage and/or CPU settings on the root resource pool restricted access to resources for the virtual machine
The configured memory storage and/or CPU reservations on the root resource pool are higher than the original resource pool

Explanation

Question 193 of 268

1

An application team is implementing a new solution in the virtualized environment. The application vendor states the application is memory intensive. The application is very unstable when operating without adequate on-demand access to physical memory. The application's virtual machines are assigned to the Mission Critical resource pool.
Which resource pool setting will help ensure the application has adequate access to memory?

Select one or more of the following:

Memory reservation
High memory share value
Unlimited memory
Expandable reservation

Explanation

Question 194 of 268

1

What will cause the validation of a vMotion migration to fail?

Select one or more of the following:

A virtual machine configured for CPU affinity
A virtual machine configured with a local .vswp file
A virtual machine configured to use NUMA
A virtual machine configured with a shared Raw-Device Mapped disk

Explanation

Question 195 of 268

1

A vSphere administrator is attempting to migrate a virtual machine, but the progress bar for the migration remains at 10%.
Which issue could be preventing the vMotion migration?

Select one or more of the following:

A networking problem between the source and destination hosts exists at the physical layer
The virtual machine is not on shared storage visible to the source and destination hosts.
The vMotion migration priority for this migration was set to High
The vMotion network is saturated

Explanation

Question 196 of 268

1

An administrator needs to migrate a virtual machine from one datastore to another, but the virtual machine has a snapshot. The virtual machine is running on an ESXi 5.x host.
Which action must the vSphere administrator take to ensure that the snapshot data remains intact?

Select one or more of the following:

Perform a standard Storage vMotion migration
Consolidate the snapshot and then perform a Storage vMotion migration
Perform a Storage vMotion migration and then copy the snapshot file to the new location
Delete the snapshot and then perform the Storage vMotion migration

Explanation

Question 197 of 268

1

How is changed block tracking (CBT) used in a vSphere implementation?

Select one or more of the following:

CBT is used by the VMkernel to reduce time needed for virtual machine copy operations
CBT is used by VMware Data Protection (VDP) to reduce time needed for backup jobs
CBT is used by vCenter Server to reduce the size of snapshots
CBT is used by vSphere Replication for synchronous replication operations

Explanation

Question 198 of 268

1

Which vSphere feature creates a copy of a virtual machine that can be stored locally within a cluster or at another site, and provides the ability to rapidly restore a virtual machine within minutes?

Select one or more of the following:

vSphere Data Protection
vSphere Replication
vSphere Snapshots
vSphere Heartbeat

Explanation

Question 199 of 268

1

A vSphere administrator configures a preferred heartbeat datastore in an HA/DRS cluster configuration. The vCenter Server identifies an alternative preferred datastore.
Why would vCenter Server identify an alternative preferred datastore over the administrator's preference?

Select one or more of the following:

The selected datastore contains powered-on virtual machines.
The selected datastore is formatted with a 1 MB block size
The selected datastore is an NFS datastore
The selected datastore is not accessible to all of the hosts

Explanation

Question 200 of 268

1

The load is high on a HA/DRS cluster. DPM is enabled. A vSphere administrator determines that hosts are NOT powering on automatically to support the load.
Which configuration would result in this condition?

Select one or more of the following:

VM-to-VM or VM-to-Host DRS rules have been configured that restrict where some VMs can be moved
DPM has been set to the most Conservative threshold
Some of the virtual machines have been removed from HA consideration by the vSphere administrator.
DRS is set to Manual Automation

Explanation

Question 201 of 268

1

A virtual machine fails to migrate during a Storage DRS event. What could cause this issue?

Select one or more of the following:

Storage DRS is enabled for the datastore cluster but disabled for the virtual disks
Storage DRS is enabled, but vMotion is disabled for the affected virtual machine
The vMotion network used for Storage DRS is down for a host in the cluster
Storage DRS is attempting to migrate the virtual machine between VMFS and NFS datastores

Explanation

Question 202 of 268

1

The load on a Fully Automated HA/DRS cluster is critically unbalanced. What condition could cause this issue?

Select one or more of the following:

DRS is disabled on one or more virtual machines
The migration threshold is set to Moderate
Storage vMotion is not enabled on the cluster
Storage DRS is disabled on the datastore hosting the cluster's virtual machines.

Explanation

Question 203 of 268

1

A vSphere administrator receives a report of an issue with a vApp. After connecting to the environment with the vSphere Client, the administrator does not see the vApp, but instead sees the inventory shown in the exhibit.
What explains this behavior?

Select one or more of the following:

The administrator is connected to the ESXi host running the vApp.
The administrator is using the Web Client. 
The vApp is in a partially deleted state
The vApp has been converted to a resource pool

Explanation

Question 204 of 268

1

A system administrator is unable to clone a windows 2008 server while connected directly to an ESXi host through vSphere Client.
Which two methods can be used to complete the task? (Choose two)

Select one or more of the following:

Connect to vCenter Server and retry the operation
Use VMware Converter to perform the operation.
Connect to the host using the Web Client and retry the operation
Use VMware Configuration Manager to perform the operation

Explanation

Question 205 of 268

1

A vSphere administrator is unable to vMotion a virtual machine between two hosts. An error message indicates that the USB device is not accessible on the target host.
What is causing this issue?

Select one or more of the following:

The USB device was not enabled for vMotion when it was added to the virtual machine
ESXi does not support vMotion with a USB device attached to the virtual machine
The VMkernel port for vMotion is not enabled for USB traffic
The virtual machine has the wrong USB controller installed

Explanation

Question 206 of 268

1

An organization's datastores are configured in a fully automated Storage Distributed Resource Scheduler (SDRS) cluster. The vSphere administrator determines that virtual machines are being migrated between datastores even though the datastores look evenly balanced. On further investigation, the administrator determines that the datastore's utilization percentages differ by 2%.
Which Storage DRS setting should the administrator change to prevent the virtual machines from migrating prematurely?

Select one or more of the following:

Edit the Storage DRS cluster settings to increase the percentage of the Space Utilization Difference threshold 
Edit the Storage DRS cluster settings to increase the percentage of the I/O imbalance threshold
Edit the Storage DRS cluster settings to increase the size of the Space Utilization Difference threshold 
Edit the Storage DRS cluster settings to increase the size of the I/O imbalance threshold

Explanation

Question 207 of 268

1

A vSphere administrator has misconfigured vMotion in such a way that vMotion migrations are failing.
Based on the information shown, what is the cause of the problem?

Select one or more of the following:

The vMotion VMkernel ports on the hosts are configured with the same IP address
The labels of the vMotion VMkernel ports are not identical
The vMotion VMkernel ports are not labeled identically
The vMotion VMkernel ports are using the same uplink.

Explanation

Question 208 of 268

1

An administrator determines that when a host residing in a High Availability (HA) cluster fails, the virtual machines fail to restart on a remaining host, or will only restart after a long delay.
Which two conditions would account for this behavior? (Choose two)

Select one or more of the following:

The virtual machines were not protected by vSphere HA at the time the failure occurred
Distributed Resource Scheduler was not enabled at the time the failure occurred
There is insufficient spare capacity on hosts with which the virtual machines are compatible.
The virtual machines contain physical Raw Device Mappings

Explanation

Question 209 of 268

1

A virtual machine is unable to communicate with another virtual machine. Both virtual machines are connected to the Production port group on the same virtual switch and are running on the same host.
Which configuration is causing the inability of the virtual machines to communicate?

Select one or more of the following:

LLDP was enabled instead of CDP for the vSphere Distributed Switch
Promiscuous Mode has been set to Allow on the Production port group
The Production port group is configured to use a secondary PVLAN.
The speed and duplex settings for the virtual machine vmnics do not match

Explanation

Question 210 of 268

1

An administrator is installing ESXi 5.x to a local SAS drive. The installation stops on a purple screen and shows the error:
The system has found a problem on your machine and cannot continue. Could not populate the filesystem: Admission check failed
Which action should the administrator take to resolve this issue?

Select one or more of the following:

Upgrade the ESXi host to meet the minimum hardware requirement for installation
Disable the network interface cards (NICs) to ensure that third-party drivers do not interfere with installation
Enable hardware Virtualization Technology in the ESXi host BIOS
Disable the Host Bus Adapters (HBA) to ensure the installation targets the local disk.

Explanation

Question 211 of 268

1

An administrator notices that a virtual machine fails to start when right-clicking on the VM in the inventory and clicking Power -> Power On.
Which log file should the administrator check first to determine why the virtual machine will not start?

Select one or more of the following:

vmkernel.log
messages
vpxa.log
fdm.log

Explanation

Question 212 of 268

1

A vSphere administrator is performing maintenance on a group of ESXi 5.5 hosts when an error message displays indicating that the ramdisk is full. The two hosts reporting the problem were deployed with Auto Deploy. What should the administrator do to resolve this issue?

Select one or more of the following:

Redirect host logs to an NFS store
Disable the System Logs through the host DCUI
Decrease the maximum host log file size to 10240KB
Move the ramdisk to an SSD drive

Explanation

Question 213 of 268

1

An administrator receives the following error message:
Unmanaged I/O workload detected on shared datastore.
Which vSphere feature is the likely source of this error?

Select one or more of the following:

Network I/O control
Storage I/O control
Storage DRS
HA datastore heartbeats

Explanation

Question 214 of 268

1

A vSphere administrator is configuring a fully automated DRS cluster and determines that DRS is not balancing virtual machine workloads.
What condition could cause this behavior?

Select one or more of the following:

vMotion is not properly configured on the hosts in the cluster
HA is not properly configured on the hosts in the cluster
The DRS threshold is configured on the most aggressive setting
Some of the virtual machines have been disabled from DRS

Explanation

Question 215 of 268

1

An organization has a HA/DRS cluster containing a mixture of ESXi 4.1 and 5.5 hosts in the cluster. An ESXi 5.5 host has failed and HA attempted but failed to restart the virtual machines on another host. HA admission control is disabled.
What condition could result in this behavior?

Select one or more of the following:

A virtual machine has an incompatible hardware version
Insufficient resources exist on the remaining ESXi hosts
vMotion migration is not supported between ESXi 5.5 and 4.1 hosts
HA failover is not supported between ESXi 5.5 and 4.1 hosts

Explanation

Question 216 of 268

1

Which condition will cause a HA/DRS cluster to display a yellow health indicator?

Select one or more of the following:

There are insufficient resources to satisfy the cluster's requirements
A virtual machine has failed and cannot be restarted in the cluster
Virtual machine I/O activity in the cluster has reached or exceeded a critical level
One or more hosts in the cluster has entered maintenance mode

Explanation

Question 217 of 268

1

A vSphere administrator finds a HA/DRS cluster status has turned RED indicating a degraded state.
What is the likely reason for the indication?

Select one or more of the following:

The cluster enabled for HA has lost resources and is unable to fulfill its failover requirements
The cluster does not have enough resources to satisfy the reservations of all resource pools and virtual machines
Incompatible CPU generations between hosts are preventing DRS migrations
The cluster is currently electing a Master host and is unavailable to perform HA functions

Explanation

Question 218 of 268

1

The virtual machine Fileserver01 shown in the exhibit can not ping anything on the Internet.
Why is Fileserver01 unable to connect to the Internet?

Select one or more of the following:

Fileserver01 does not have a reachable IP address
Fileserver01 is not on the Production network
The virtual nic for Fileserver01 has a speed or duplex mismatch
The vSwitch1 virtual switch does not have an attached vmnic adapter

Explanation

Question 219 of 268

1

An administrator needs to know the estimated time remaining on a virtual machine that is hosting a critical accounting application given current assigned resources such as memory, CPU, and disk.
When an administrator selects the virtual machine in the vCenter Operations Manager console, which major badge should the administrator investigate to determine this information?

Select one or more of the following:

Risk
Health
Efficiency
Time Remaining

Explanation

Question 220 of 268

1

An application server has been added to an existing multi-tier application contained in a vApp. Shortly after a planned maintenance event, users are unable to access the application.
What does the vSphere administrator need to change to ensure the application can be accessed?

Select one or more of the following:

The startup order of the vApp
The shutdown option to power off the virtual machines
The IP Allocation policy to DHCP
The Memory Shares to High

Explanation

Question 221 of 268

1

A vSphere administrator needs to upgrade a single extent VMFS3 datastore to VMFS5 and expand it to 4TB in size. The storage administrator has already expanded the underlying LUN to 4TB.
Which steps should the vSphere administrator take?

Select one or more of the following:

Expand the VMFS3 datastore to 4TB and then upgrade to VMFS5
Upgrade the datastore to VMFS5, manually change the partition scheme to GPT, and then expand the datastore to 4TB
Upgrade the datastore to VMFS5 and then expand it to 4TB
Change the block size of the VMFS3 datastore to 1MB, upgrade the datastore to VMFS5, and expand it to 4TB

Explanation

Question 222 of 268

1

A vSphere administrator notices that hosts are not powering off when the total cluster load is low on a cluster configured with Dynamic Power Management.
What condition could cause this behavior?

Select one or more of the following:

The DRS migration threshold is set to the most conservative setting
The DRS migration threshold is set to the most aggressive setting
The DPM migration threshold is set to the most conservative setting
The DPM migration threshold is set to the most aggressive setting

Explanation

Question 223 of 268

1

A vSphere administrator installs an ESXi host and creates a virtual machine, then installs vCenter Server. Upon connecting to the environment, the administrator notices that several inventory views appear to be missing from the Navigation Bar as shown in the Exhibit.
Which condition would result in this behavior?

Select one or more of the following:

The vSphere administrator is logged directly into the ESXi host
The vSphere administrator is logged directly into the vCenter Server
The vSphere administrator has limited permissions on the ESXi host
The vSphere administrator has limited permissions on the vCenter Server

Explanation

Question 224 of 268

1

While troubleshooting a crash event on an ESXi 5.x host, an administrator determines the log files related to the event are NOT present.
Which action should the administrator take to resolve the logging issue?

Select one or more of the following:

Increase the amount of memory committed to log storage
Increase the statistic data collection level to 4
Change the roll-up type to maximum
Create a persistent scratch location

Explanation

Question 225 of 268

1

The administrator needs to modify the problematic configuration shown in the exhibit to meet the following requirements:
1. Uplink ports must connect to a 2-port Etherchannel connection. 2. Traffic must pass, even in the event of a port failure.
Which two configuration changes should the administrator make? (Choose two)

Select one or more of the following:

Change the Load balancing algorithm to Route based on ip hash
Change the Load balancing algorithm to Route based on physical NIC load
Move Uplink 1 into Active Uplinks and Uplink 2 into Standby Uplinks
Move both uplinks into the Active Uplinks

Explanation

Question 226 of 268

1

While shutting down a vApp for maintenance, a vSphere administrator determines that one of the virtual machines stays powered on. The administrator manually powers off the virtual machine inside the vApp.
Which step should the administrator take to prevent the virtual machine from staying powered on in the future?

Select one or more of the following:

Change the Shutdown Action for the virtual machine to None 
Change the Shutdown Action for the virtual machine to Power Off
Change the Shutdown Action for the virtual machine to Manual
Change the Shutdown Action for the virtual machine to Excluded

Explanation

Question 227 of 268

1

An ESXi 5.x host is unable to connect to a vCenter 5.x server.
Which commands should an administrator use to restart the management agents on the host?

Select one or more of the following:

SSH to the host and execute the commands - /etc/init.d/hostd restart and /etc/init.d/vpxa restart
SSH to the host and execute the commands - /etc/init.d/vpxd restart and /etc/init.d/vpxa restart
SSH to the host and execute the commands - /etc/init.d/vmware-hostd restart and /etc/init.d/vmware-vpxa restart
SSH to the host and execute the commands - /etc/init.d/vmware-hostd restart and /etc/init.d/vpxd restart

Explanation

Question 228 of 268

1

The following error displays during the final step of the configuration for a VMware High Availability (HA) cluster attached to five datastores:
The number of heartbeat datastores for host is 0, which is less than required. What condition would cause this error?

Select one or more of the following:

One of the hosts in the cluster is not attached to the datastores planned for use with HA
The hosts in the cluster do not have Storage DRS configured on one or more of their datastores
One of the hosts in the cluster has an invalid Storage Policy configured on one or more of their datastores
The hosts in the cluster contain one or more datastores configured with a 1 MB block size

Explanation

Question 229 of 268

1

Using the vSphere Web Client to display Software iSCSI Initiator properties reveals that one of two configured paths is Not Used. The ESXi syslog events are as shown:
What is the root cause of the problem?

Select one or more of the following:

The VMkernel adapter named vmk3 is on a subnet different from the iSCSI server's subnet
The path will only become Active if the VMkernel adapter named vmk1 loses connectivity
The VMkernel adapter named vmk3 has lost network connectivity
The VMKernel adapter named vmk3 is on a different vSwitch from vmk1

Explanation

Question 230 of 268

1

A number of virtual machines in a vSphere 5.5 DRS cluster are connected to the same virtual switch port group. After several of these VMs are migrated to another host, an administrator notices that they have lost network connectivity. The Events tab in vCenter Server shows this error message:
Failed to initialize ethernet0.
The vmkernel log file on the host running the affected VMs contains this message:
Can't connect device:'port group name': Out of resources.
Which caused this issue?

Select one or more of the following:

Network I/O Control was enabled
The DRS cluster containing the VMs was set to Fully Automated with the Migration Threshold set to Conservativ
There were insufficient uplinks configured on the virtual switches
The virtual switch port allocation was changed from the default setting

Explanation

Question 231 of 268

1

A VMware administrator determines that a low priority virtual machine is negatively affecting the disk I/O performance of a higher priority virtual machine. The virtual machines are hosted on the same datastore presented to the same ESXi host.
Which configuration option should the VMware administrator use to resolve this issue?

Select one or more of the following:

Increase the disk share value for the high priority VM
Migrate the low priority VM to another ESXi host
Create a Storage Profile for each priority level
Enable vSphere APIs for Array Integration (VAAI)

Explanation

Question 232 of 268

1

A vSphere administrator has a 4 host DRS cluster with plans to grow to 8 hosts. During a vMotion migration, the following error is displayed:
What action could be taken to resolve the issue?

Select one or more of the following:

Ensure all hosts in the cluster contain only Intel or AMD CPUs
Choose Reset all to Default in the CPU Identification Mask of the VM
Verify and correct the vmkernel port settings for the vMotion network
Configure the DRS Migration Threshold to the most conservative setting

Explanation

Question 233 of 268

1

For security reasons, SSH and the ESXi Shell have been disabled on a standalone ESXi 5.x host. A vSphere administrator accesses the Direct Console User Interface (DCUI) to examine log files related to a recent connection issue. Which system log can the administrator access to determine the cause of the issue?

Select one or more of the following:

syslog
fdm
messages
vmksummary

Explanation

Question 234 of 268

1

An administrator needs to export system logs for an ESXi 5.5 host to determine the root cause for a host performance issue. This host supports manifest-driven exports of system logs.
Which manifest is selected by default during the export system log wizard?

Select one or more of the following:

Userworld
Hostworld
PerformanceSnapshot
HungVM

Explanation

Question 235 of 268

1

An ESXi 5.x host disconnects within 60 seconds after the administrator adds it to the vCenter Server inventory. The administrator determines that the issue could be related to a networking problem. Which networking port should the administrator check for connectivity from the host to vCenter Server?

Select one or more of the following:

902
903
443
9443

Explanation

Question 236 of 268

1

An administrator adds an ESXi 5.x host to the inventory of a vCenter Server that is configured with a vSphere Distributed Switch. The vSphere Web Client indicates that the host is not responding. The administrator determines from the command line that the vpxa agent is stopped.
What should the administrator do to resolve this issue without affecting the uptime of the virtual machines running on the host?

Select one or more of the following:

Restart the management agents in the host's DCUI 
Remove and re-add the host to the vCenter inventory 
Restart the vCenter Server service 
Type /etc/vmware/vpxa start from the ESXi command line

Explanation

Question 237 of 268

1

An ESXi host's networking is configured as shown. The virtual machine named Fileserver01 is unable to ping anything on an external network:
Which condition would explain this behavior?

Select one or more of the following:

The vSwitch1 virtual switch does not have an attached vmnic adapter
The Fileserver01 virtual machine is not running. 
Switch0 is configured to reject MAC address spoofing
vmk0 is using a non-routable IP address

Explanation

Question 238 of 268

1

A security audit has revealed that a virtual machine on vSwitch1 is receiving all traffic sent to the virtual switch, violating corporate policy. The vSphere administrator examines the properties for vSwitch1, as shown in the exhibit:
Which configuration explains why the virtual machine is receiving all traffic sent to vSwitch1?

Select one or more of the following:

The Production port group has the Promiscuous Mode policy set to Accept
vSwitch1 has the Promiscuous Mode policy set to Reject
The Network Failure Detection policy on the Production port group is set to Link Status plus Beaconing
The Network Failure Detection policy on vSwitch1 is set to Link Status only

Explanation

Question 239 of 268

1

An administrator receives notice of a large number of ARP table issues. The issues began after a maintenance window 36 hours ago. The issue did not exist prior to the maintenance window.
Which change was made to the port group that is causing the ARP table issue?

Select one or more of the following:

Notify Switches was changed to No
Uplink 2 was changed from Standby to Active
Failback was changed to Yes
Network failure detection was changed to Link status only

Explanation

Question 240 of 268

1

A vSphere administrator attempts to manually vMotion a virtual machine but receives error messages related to the Shared Storage datastore shown in the exhibit.
The administrator uses the vSphere Web Client and locates the datastore settings shown:
Which action should the administrator take to resolve these errors?

Select one or more of the following:

Reconnect server3 to the vCenter server
Select server3 and click Mount
Remove server3 from the cluster then re-add it.
Right-click Not connected and select Connect

Explanation

Question 241 of 268

1

A SAN administrator recently installed a storage encryption switch on the Fibre Channel Fabric. Shortly after the deployment, several new VMFS5 datastores recently created were dismounted. Attempts to manually mount them fail. VMFS5 upgraded datastores are unaffected. All Storage arrays in use support VASA and VAAI.
What is the root cause of this problem?

Select one or more of the following:

All newly created VMFS5 datastores are tagged ATS_Only. The storage encryption switch blocks the ATS command
All newly created VMFS5 datastores are tagged XCOPY_Only. The storage encryption switch blocks the XCOPY command
All newly created VMFS5 datastores are tagged WRITE_SAME_Only. The storage encryption switch blocks the WRITE_SAME command
All newly created VMFS5 datastores were formatted with 1MB block size. The storage encryption switch does not support this block size

Explanation

Question 242 of 268

1

An administrator is using esxtop to troubleshoot a storage performance issue.
Which parameter should the administrator check to monitor any storage-related vSphere overhead?

Select one or more of the following:

DAVG
KAVG
GAVG
CMDS

Explanation

Question 243 of 268

1

An error occurs while building a new virtual machine with a thin provisioned virtual disk size of 20GB. The datastore has 35GB of free space. The datastore is overcommitted by 95GB.
What is preventing the virtual machine from being built?

Select one or more of the following:

The datastore is built on a thin provisioned LUN that has run out of storage array free space
The datastore has reached the maximum overcommitment threshold
The virtual disk used by the virtual machine cannot be thin provisioned on this datastore
The virtual disk used by the virtual machine requires more free space than is available in the datastore.

Explanation

Question 244 of 268

1

A vSphere administrator enables and configures a Software iSCSI Initiator, and configures an iSCSI vmkernel portgroup with Port Binding. The SAN administrator creates a few LUNs on an iSCSI server. However, when the vSphere administrator adds the IP address of the iSCSI server in the Dynamic Discovery list, no iSCSI targets are detected.
What condition would result in this behavior?

Select one or more of the following:

The iSCSI vmkernel portgroup and the iSCSI server are on different subnets
The iSCSI server IP address should be entered in the Static Discovery instead of Dynamic Discovery list
The network card bound to the iSCSI portgroup is 1Gbps Ethernet instead of 10Gbps
A Software iSCSI Initiator cannot use Port Binding in conjunction with Dynamic Discovery

Explanation

Question 245 of 268

1

Immediately after installing an ESXi host, an administrator needs to examine the following log files: • /var/log/hostd.log • /var/log/vmkernel.log • /var/log/vpxa.log
Which two connections would allow an administrator to examine these files? (Choose two)

Select one or more of the following:

Connecting to the Direct Console User Interface
Attaching a vSphere Client directly to the ESXi host
Attaching the vSphere Web Client directly to the ESXi host 
Attaching the vSphere Client to the vCenter Server managing the ESXi host

Explanation

Question 246 of 268

1

A vSphere administrator needs to configure a virtual machine to meet a guaranteed CPU performance profile.
Which configuration setting could the administrator choose?

Select one or more of the following:

Set the CPU Limit to High
Set the CPU Shares to 500MHz 
Set the CPU Guarantee to High
Set the CPU Reservation to 500MH

Explanation

Question 247 of 268

1

A vSphere administrator needs a way of sending noncritical ESXi events to a remote server. Due to budget constraints, no additional costs should be incurred.
Which tool will best meet this requirement?

Select one or more of the following:

vSphere Syslog Collector
vSphere ESXi Dump Collector
vSphere vCenter Log Insight
vSphere Management Appliance

Explanation

Question 248 of 268

1

What is portrayed in the performance chart?

Select one or more of the following:

The ESXi host running the VM has Transparent Page Sharing enabled
The virtual machine's memory share value is set too high
The virtual machine is memory constrained
The ESXi host running the VM is low on memory

Explanation

Question 249 of 268

1

A vSphere administrator can create an alarm on which two objects? (Choose two)

Select one or more of the following:

LUN 
Datastore
Template
Folder

Explanation

Question 250 of 268

1

An administrator needs to modify a virtual machine alert to increase the threshold value of the trigger. Once connected to the vCenter Server, the administrator navigates to the virtual machine to make the change. However, the administrator is unable to edit the alarm. What is the reason that this alarm cannot be edited?

Select one or more of the following:

The alarm was not defined on this inventory object. 
The administrator is not the owner of this inventory object
The alarm was not created by the administrator. 
The alarm has not been acknowledged

Explanation

Question 251 of 268

1

An administrator using vCenter Operations Manager is viewing the health of an ESXi host in the environment. There have NOT been any reported outages or issues with the ESXi host, but the administrator needs to determine if the host is behaving normally.
Which minor badge should the administrator investigate to determine this information?

Select one or more of the following:

Faults
Anomalies
Stress
Health

Explanation

Question 252 of 268

1

Which minor badge scores are used to calculate the Health score in vCenter Operations Manager?

Select one or more of the following:

Time remaining, Capacity remaining, Stress
Workload, Anomalies, Faults
Stress, Faults, Risk
Reclaimable Waste, Density

Explanation

Question 253 of 268

1

What is indicated by the performance chart shown?

Select one or more of the following:

Guest memory is overcommitted
Host memory is overcommitted.
Host is I/O constrained
Guest is I/O constrained

Explanation

Question 254 of 268

1

An administrator needs to use performance information from Windows virtual machines to better understand their effect on the vSphere 5.x hosts on which they run.
What must the administrator do to collect this information?

Select one or more of the following:

Install VMware Tools with the PERFMON counters enabled in the Advanced option of the installer. 
Install VMware Tools. Add counters in the PERFMON utility
Install VMware Tools. Edit the VMware Tools settings to enable the VM-specific counters
Install VMware Tools. Install the PERFMON plug-in for VMware Tools

Explanation

Question 255 of 268

1

A vSphere administrator receives a request to capture the state of a virtual machine six times a day.
Which procedure will satisfy the requirement with the least amount of administrator intervention?

Select one or more of the following:

Use the vSphere web client to configure a scheduled task to take a snapshot every four hours
Use the vSphere web client to configure a scheduled workflow to take a snapshot every four hours
Use the vSphere web client to manually initiate a snapshot of the virtual machine every four hours
Use the vSphere web client to schedule an automated snapshot every four hours using Snapshot Manage

Explanation

Question 256 of 268

1

What action should an administrator take to store ESXi 5.x host system logs centrally?

Select one or more of the following:

Configure vCenter Server to automatically export log files to a syslog server at regular intervals
Configure vCenter Server to send all log information to a syslog server
Configure each ESXi host to send all log information to a syslog server. 
Configure the syslog server to import log files from each ESXi host at regular intervals

Explanation

Question 257 of 268

1

An administrator needs to configure an alarm that notifies administrators if an application is impacted by over-commitment of memory resources. The environment consists of 100 virtual machines running on 5 ESXi hosts that are configured in a fully automated HA/DRS cluster. The cluster is configured with a parent resource pool and Production and Development child pools.
Where should the administrator set the alarm to meet the requirement?

Select one or more of the following:

On each virtual machine
On each host
On the Production resource pool
On the cluster

Explanation

Question 258 of 268

1

An administrator using vCenter Operations Manager notices an increase in resource consumption by virtual machines over a period of time. The administrator needs to understand how adding more hosts or increasing resources in existing hosts will address the growing resource requirements of the virtual machines.
Which vCenter Operations Manager feature can provide this information?

Select one or more of the following:

Host or Cluster Capacity Optimization Report
What-if Scenarios 
Density and Reclaimable Waste badges
Virtual Machine Optimization Report

Explanation

Question 259 of 268

1

A vSphere administrator has configured a virtual machine alarm to trigger a warning when the condition Snapshot Size exceeds 1GB.
Which action should the administrator configure on the alarm to automatically resolve the condition?

Select one or more of the following:

Delete Snapshot
Reset VM
Run a Command
Consolidate Snapshot

Explanation

Question 260 of 268

1

An administrator needs to create an alarm to monitor when a specific ESXi host in an HA/DRS cluster becomes disconnected from other vSphere components like HA agents or the vCenter server.
Which process must the administrator use to accomplish this?

Select one or more of the following:

Define a Host type alarm, monitor for the event Cannot connect host, and supply a conditional trigger on Host name equal to a specific label
Define a Cluster type alarm, monitor for the event Cannot connect host, and supply a conditional trigger on Host name equal to a specific label
Define a Cluster type alarm, monitor for the event Host status changed, and supply a specific label for each host.
Define a Host type alarm, monitor for the condition Host status changed, and supply a specific label for each host.

Explanation

Question 261 of 268

1

The vCenter Operations Manager dashboard shows Health issues associated with the selected virtual machine. There have been no availability or configuration issues associated with the virtual machine, and the workload badge is still green.
What is the most likely reason for this health score?

Select one or more of the following:

The workload for the virtual machine is higher than normal, which is generating a large number of anomalies within vCenter Operations Manager. 
A high stress and a pattern of constrained resources has been attributed to the virtual machine in vCenter Operations Manager
A recent migration to another host in the cluster has violated HA admission control policy
vCenter Operations Manager has determined that the time remaining for the virtual machine's assigned CPU resources is very low

Explanation

Question 262 of 268

1

A VMware administrator determines that the active memory on an ESXi 5.x host is 20% and the consumed memory is 90%.
How much host memory is available to virtual machines?

Select one or more of the following:

80%
10%
70%
20%

Explanation

Question 263 of 268

1

The vSphere administrator needs to check the system health of an ESXi 5.x host using the vSphere Web Client. Which option in the Monitor tab should the administrator use for the selected

Select one or more of the following:

Performance
Hardware Reports
Storage Status 
Issue Log

Explanation

Question 264 of 268

1

A vSphere administrator needs to configure the environment to send a notification to a monitored email address every time a vSphere alarm is triggered.
Which procedure should the administrator use to accomplish the task?

Select one or more of the following:

Use the vSphere web client to configure the vCenter Server SMTP settings. Edit the alarm action to send a notification email
Use the vSphere web client to configure the vCenter Server SNMP settings. Edit the alarm action to send a notification email
Use the vSphere web client to create a vCenter Server scheduled task that will send a notification email when an alarm is triggered
Use the vSphere web client to create a vCenter Orchestrator workflow that will send a notification email when an alarm is triggered

Explanation

Question 265 of 268

1

Which default alarm definition will send a notification trap if the redundant storage path is lost?

Select one or more of the following:

Cannot connect to storage
Datastore removed from host
Host storage status
Hardware health changed

Explanation

Question 266 of 268

1

The vCenter Operations Manager dashboard is showing Health issues associated with the selected virtual machine. There have been no availability or configuration issues with the virtual machine, and the workload badge is still green:
How should an administrator resolve this issue?

Select one or more of the following:

Select the Anomalies badge to identify the cause of the abnormal behavior, then take appropriate action
Select the Stress badge to identify the cause of the increased stress, then take appropriate action
Select the Risk badge, identify the host at risk, and migrate the VM to a host with more resources
Select the Risk badge to identify how much time is remaining before CPU resources are gone, then assign more resources

Explanation

Question 267 of 268

1

Time Remaining, Capacity Remaining, and Stress are minor badges of which major badge in vCenter Operations Manager?

Select one or more of the following:

Health
Risk
Efficiency
Workload

Explanation

Question 268 of 268

1

Which minor badge items make up the Efficiency badge score for an ESXi host in vCenter Operations Manager?

Select one or more of the following:

Workload, Anomalies, Fault
Workload, Stress, Density
Time Remaining, Capacity Remaining
Reclaimable Waste, Density

	Created by vkv0110 about 9 years ago

Test Exam

Personal Test

Personal Test

Question 1 of 268

Select one or more of the following:

Explanation

Question 2 of 268

What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two)

Select one or more of the following:

Explanation

Question 3 of 268

Select one or more of the following:

Explanation

Question 4 of 268

Which Single Sign-On deployment mode should an administrator use for two 5.x vCenter Servers configured with linked mode?

Select one or more of the following:

Explanation

Question 5 of 268

Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two)

Select one or more of the following:

Explanation

Question 6 of 268

Select one or more of the following:

Explanation

Question 7 of 268

Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two)

Select one or more of the following:

Explanation

Question 8 of 268

A small company wants to use VMware products for its production systems. The system administrator needs to recommend a solution that will deliver High Availability to the company's production applications. What is the minimum vSphere offering that will support this requirement?

Select one or more of the following:

Explanation

Question 9 of 268

A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost?

Select one or more of the following:

Explanation

Question 10 of 268

An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue?

Select one or more of the following:

Explanation

Question 11 of 268

What is a valid plug-in status for a plug-in that has been added to a vSphere client?

Select one or more of the following:

Explanation

Question 12 of 268

Select one or more of the following:

Explanation

Question 13 of 268

Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation?

Select one or more of the following:

Explanation

Question 14 of 268

During the installation of ESXi 5.5, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message?

Select one or more of the following:

Explanation

Question 15 of 268

During an upgrade, the ESXi 5.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?

Select one or more of the following:

Explanation

Question 16 of 268

What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?

Select one or more of the following:

Explanation

Question 17 of 268

Select one or more of the following:

Explanation

Question 18 of 268

The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services?

Select one or more of the following:

Explanation

Question 19 of 268

Select one or more of the following:

Explanation

Question 20 of 268

Select one or more of the following:

Explanation

Question 21 of 268

To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity. What should the administrator do to meet the requirement?

Select one or more of the following:

Explanation

A small company wants to use VMware products for its production systems. The system administrator needs to recommend a solution that will deliver High Availability to the company's production applications.
What is the minimum vSphere offering that will support this requirement?

A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost?

An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day.
What is the most appropriate first step the administrator should take to resolve this issue?

Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI).
What is the most likely explanation?

During the installation of ESXi 5.5, the following error message is reported:
Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS.
Which condition would generate this message?

During an upgrade, the ESXi 5.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5.
Which option should be chosen to meet this requirement?

The vSphere administrator is configuring directory services for an ESXi host:
What should the vSphere administrator do to configure the host to use CAM services?

To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.
What should the administrator do to meet the requirement?

A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features.
Which edition of vSphere provides similar functionality to evaluation mode?

An administrator is re-provisioning an ESXi host and moving it to another datacenter.
Which DCUI option should the administrator use to revert the system configuration to the default settings?

An administrator needs to continue using ESXi after the 60-day evaluation period expires. The administrator has obtained a valid license from VMware.
Which step must the administrator take to deploy the license?

The oncall system administrator has made a change on the ESXi host requiring a restart of the management network. Lockdown mode is enabled.
Which action should the administrator take to restart the management network?