Jorge Linero
Quiz by , created more than 1 year ago

Quiz on BOEING 787, created by Jorge Linero on 06/09/2015.

1
0
0
Jorge Linero
Created by Jorge Linero over 8 years ago
Close

BOEING 787

Question 1 of 23

1

What are the 2 types of Toolbox?

Select one of the following:

  • a. Toolbox Remote and Toolbox Online

  • b. Toolbox Internet and Toolbox Local

  • c. Toolbox Remote and Toolbox Web

Explanation

Question 2 of 23

1

Where is Toolbox Remote data stored?

Select one of the following:

  • a. On an airline server

  • b. On a Boeing server

  • c. On the hard drive of the ML

Explanation

Question 3 of 23

1

Where is Toolbox Online data stored?

Select one of the following:

  • a. On an airline server

  • b. On a Boeing server

  • c. On the hard drive of the ML

Explanation

Question 4 of 23

1

Look at this DMC: DMC-B787-A-23-15-00-01A-300B-A. What is the 6-digit ATA code
included in the number?

Select one of the following:

  • a. A-23-15

  • b. 23-15-00

  • c. 15-00-01

Explanation

Question 5 of 23

1

To find maintenance procedures or fault isolation data in Toolbox, select the:

Select one of the following:

  • a. Data Manager Tab.

  • b. Library Tab.

  • c. Structures Tab

Explanation

Question 6 of 23

1

In Toolbox, which tab gives access to the FIM Fault Finder page?

Select one of the following:

  • a. Data Manager Tab.

  • b. Systems Tab.

  • c. Structures Tab

Explanation

Question 7 of 23

1

Toolbox Remote gives access to more maintenance data than Toolbox Online.

Select one of the following:

  • a. True

  • b. False

Explanation

Question 8 of 23

1

Which of the following data you cannot find in Toolbox Remote?

Select one of the following:

  • a. Fault isolation data

  • b. Schematics and wiring diagrams

  • c. Supplier data

  • d. Parts data

Explanation

Question 9 of 23

1

Which of the following components are not in the common computing resource (CCR)
cabinets?

Select one of the following:

  • a. General processor modules (GPM)

  • b. ARINC 664 network cabinet switches (ACS)

  • c. Remote data concentrators (RDC)

  • d. Fiber optic translator (FOX) modules

Explanation

Question 10 of 23

1

In which CCS components are the hosted software applications for airplane systems
stored?

Select one of the following:

  • a. General processor modules (GPM)

  • b. ARINC 664 network cabinet switches (ACS)

  • c. Remote data concentrators (RDC)

  • d. Fiber optic translator (FOX) modules

Explanation

Question 11 of 23

1

What is the purpose of the fiber optic translator (FOX) modules?

Select one of the following:

  • a. Changes A664 signals to electrical A429

  • b. Changes light signals to electrical and vice versa

  • c. Changes A429 signals to electrical

Explanation

Question 12 of 23

1

ARINC 664 network cabinet (ACS) switches:
(Select the incorrect response.)

Select one of the following:

  • a. Have 2 channels.

  • b. Have fiber optic ARINC 664 connections.

  • c. Have electrical ARINC 664 connections.

  • d. Connect to the general processor (GPM) modules

Explanation

Question 13 of 23

1

The ARINC 664 network remote switches (ARS):
(Select the incorrect response.)

Select one of the following:

  • a. Connect to the remote data concentrators (RDC).

  • b. Connect to the fiber optic translator (FOX) modules.

  • c. Have ARINC 429 connections.

  • d. Filter, monitor, and forward data.

Explanation

Question 14 of 23

1

The Remote data concentrators (RDC) have:
(Select the incorrect response.)

Select one of the following:

  • a. Fiber optic connections.

  • b. ARINC 429 connections.

  • c. Analog and analog discrete connections.

  • d. Controller area network (CAN) bus connections

Explanation

Question 15 of 23

1

Which components are parts of the common data network (CDN)?
(Select the incorrect response.)

Select one of the following:

  • a. ARINC 664 network cabinet (ACS) switches

  • b. General processor modules (GPM)

  • c. ARINC 664 network remote (ARS) switches

  • d. Fiber optic translator (FOX) modules

Explanation

Question 16 of 23

1

When does the common core system (CCS) power-up in the inhibited mode?

Select one of the following:

  • a. In the air. Either fuel control switch in RUN. No Fuel Cutoff switch data is available.

  • b. In the ground. Either fuel control switch in RUN. No Fuel Cutoff switch data is available.

  • c. In the air. Either fuel control switch in CUTOFF. No Fuel Cutoff switch data is available.

Explanation

Question 17 of 23

1

You apply power to the airplane on battery power only. How long does it take for the
displays to show?

Select one of the following:

  • a. About 50 seconds

  • b. About 100seconds

  • c. About 150 seconds

Explanation

Question 18 of 23

1

In flight, all displays go blank. The flight crew pushes the L CCR reset switch. What
happens?

Select one of the following:

  • a. The power conditioning modules in the CCR cabinet remove the power to the cabinet
    modules in the left CCR cabinet

  • b. The power conditioning modules in the CCR cabinet remove and reapply power to the
    cabinet modules in the left CCR cabinet

  • c. The power conditioning modules in the CCR cabinet reapply power to the cabinet
    modules in the left CCR cabinet

Explanation

Question 19 of 23

1

Some components have a direct connection with the CDN (they do not go through RDCs).
Where can you see the status of these connections?

Select one of the following:

  • a. On the DCAS maintenance pages

  • b. On the ATA 31 maintenance pages

  • c. On the CCS maintenance pages

Explanation

Question 20 of 23

1

To make alert indications, the caution and warning system uses:
(Select the incorrect response.)

Select one of the following:

  • a. EICAS messages.

  • b. comm/warning speakers.

  • c. Master warning/caution lights.

  • d. Fail flags.

Explanation

Question 21 of 23

1

What 2 signals must the stick shaker motors receive before they operate?

Select one of the following:

  • a. 28v dc from an RPDU and ground signal from an RDC

  • b. 28v dc from an RPDU and ground signal from CRN

  • c. 28v dc from an RPDU and ground signal from an CCS

Explanation

Question 22 of 23

1

During a warning condition, you push a master warning light. What happens?
(Select the incorrect response.)

Select one of the following:

  • a. The related EICAS warning level message goes away.

  • b. The master warning light goes off.

  • c. The aural alert may stop.

Explanation

Question 23 of 23

1

Which are the major components of the primary display system (PDS)?
(Select the incorrect response.)

Select one of the following:

  • a. Graphics generators (GG)

  • b. Head-down displays (HDD)

  • c. General processor modules (GPM)

  • d. Head-up displays (HUD)

Explanation

Previous
Next