EXAMEN AUTOCAD

Question 1 of 10

1

Open floor plan sample .dwg
Active the marketing named view
Insert the copy machine block at mid point of the Wall (1) whith a rotation of 270 derees
Assign it to the FURNITURE layer.
Edit the block definition to change the length of copy machine rack to 0.25 as shown in the exhibit

What is the distance for the lower left corner (2) of the copy machine to the midpoint of Wall (1)?
#.##

Select one of the following:

1.10
1.50
1.15
1.05

Explanation

Question 2 of 10

1

Open grips. dwg
Using grip, strech the right edge of the table to align with line 1
What is the cell width of one of the columns

Select one of the following:

1.20
1.32
1.15

Explanation

Question 3 of 10

1

Open Exterior Elevetions.dwg
Activate the south elevation named view.
Create a new hatch pattern in área 1 with the following properties and options:
Boundary method = Pick Points
Hatch pattern = BRSTONE
Hatch angle =0
Hatch scale =1
Layer = WALLS
Island detection = outer island detection

What is the área of the new hatch pattrern thet you created?

Select one of the following:

74.21
74.27
72.12

Explanation

Question 4 of 10

1

Open T-02xyz.dwg
Create new Mtext using the following parameters:

Use the exiting rectangle to select the first (1 ) and oppsite (2) corners.
Verify the text style is set to SANSERIF
Set the text height to 0.25
Change the justification top center
For the text, enter ALL EXISTIN DIMENSION TO BE VERIFIED
On the properties Palette, wath is the position x value of text?

Select one of the following:

30.19
32.19
39.12
39.40

Explanation

Question 5 of 10

1

Open VW252-03-1200.dwg
Zoom to the lower left hexagon
Modify the ISO Style 1 dimensions style so that presicion for the primary units is to three decimal places
Place the dimensión, as show in the exhibit, using the ISO Style 1 dimensión style
What is the dimensión value (1)?

Select one of the following:

28.056
28.023
28.040
28.055

Explanation

Question 6 of 10

1

Open Isometric dwg.

Create an Isometric view based off of exsting views
What is the distance from 1 to 2?

Select one of the following:

14.06
14
14.5
14.59

Explanation

Question 7 of 10

1

Openvw252-03-1200.DWG.
Active the add chanfer fillets named view.
Add two chanfer at corners 1 and 2 with all distances set at 1.75 units
Add a fillet at corner 3 whith the radius set at 1.75 units

What is the distance from the midpoint of chanfer 1 to the midpoint of fillet 3

Select one of the following:

12.27
12.28
12.29
12.30

Explanation

Question 8 of 10

1

Open Floor Plan Sample dwg.
Activate the copy room named view
Whith orther turned on, move the computer 2.5 units to the right and 1.5 units down

What is the distance of corner 1 to corner 2?

Select one of the following:

1.98
1.88
1.28
1.89

Explanation

Question 9 of 10

1

Open the drawing file Floor Plan Sample.dwg

Copy the ISO A1 Layout and rename the leyout to Plot Restore
Set the Following Page setup parameters.
Plot style: acad .ctb
Printer/plotter DWG to PDF. Pc3
Paper size: ISO expand A1 (841.00 x 594.00 mm)
Plot área: layout
Ploter scale: 1:1
Drawing Orientation: Landscape
Delete the existing viewport
Create a new viewport from one corner of the titleblock to the other.
In the viewport, actívate the Plot Restore named view

What number appears on the screen?

Select one of the following:

2018
2016
2015
2022

Explanation

Question 10 of 10

1

Open Floor Plan Sample. Dwg

For the ISO A1 layout, set the following page setup parameters:

Plot style: acad. Ctb
Printer/plotter: DWG to PDF. pc3
Paer size: ISO A1 (594 x 841 mm)
Plot scale : 1:1
Plot área: Extents
Plot Offset: Center the Plot

What is plot offset x value?

Select one of the following:

-16.54
+16.54
+-16.54
16.54

	Created by Alejandro Osio almost 2 years ago

EXAMEN AUTOCAD

Question 1 of 10

Select one of the following:

Explanation

Question 2 of 10

Open grips. dwg Using grip, strech the right edge of the table to align with line 1 What is the cell width of one of the columns

Select one of the following:

Explanation

Question 3 of 10

Select one of the following:

Explanation

Question 4 of 10

Select one of the following:

Explanation

Question 5 of 10

Open VW252-03-1200.dwg Zoom to the lower left hexagon Modify the ISO Style 1 dimensions style so that presicion for the primary units is to three decimal places Place the dimensión, as show in the exhibit, using the ISO Style 1 dimensión style What is the dimensión value (1)?

Select one of the following:

Explanation

Question 6 of 10

Open Isometric dwg. Create an Isometric view based off of exsting views What is the distance from 1 to 2?

Select one of the following:

Explanation

Question 7 of 10

Openvw252-03-1200.DWG. Active the add chanfer fillets named view. Add two chanfer at corners 1 and 2 with all distances set at 1.75 units Add a fillet at corner 3 whith the radius set at 1.75 units What is the distance from the midpoint of chanfer 1 to the midpoint of fillet 3

Select one of the following:

Explanation

Question 8 of 10

Open Floor Plan Sample dwg. Activate the copy room named view Whith orther turned on, move the computer 2.5 units to the right and 1.5 units down What is the distance of corner 1 to corner 2?

Select one of the following:

Explanation

Question 9 of 10

Select one of the following:

Explanation

Question 10 of 10

Open Floor Plan Sample. Dwg For the ISO A1 layout, set the following page setup parameters: Plot style: acad. Ctb Printer/plotter: DWG to PDF. pc3 Paer size: ISO A1 (594 x 841 mm) Plot scale : 1:1 Plot área: Extents Plot Offset: Center the Plot What is plot offset x value?

Select one of the following:

Explanation

Open grips. dwg
Using grip, strech the right edge of the table to align with line 1
What is the cell width of one of the columns

Open VW252-03-1200.dwg
Zoom to the lower left hexagon
Modify the ISO Style 1 dimensions style so that presicion for the primary units is to three decimal places
Place the dimensión, as show in the exhibit, using the ISO Style 1 dimensión style
What is the dimensión value (1)?

Open Isometric dwg.

Create an Isometric view based off of exsting views
What is the distance from 1 to 2?

Openvw252-03-1200.DWG.
Active the add chanfer fillets named view.
Add two chanfer at corners 1 and 2 with all distances set at 1.75 units
Add a fillet at corner 3 whith the radius set at 1.75 units

What is the distance from the midpoint of chanfer 1 to the midpoint of fillet 3

Open Floor Plan Sample dwg.
Activate the copy room named view
Whith orther turned on, move the computer 2.5 units to the right and 1.5 units down

What is the distance of corner 1 to corner 2?

Open Floor Plan Sample. Dwg

For the ISO A1 layout, set the following page setup parameters:

Plot style: acad. Ctb
Printer/plotter: DWG to PDF. pc3
Paer size: ISO A1 (594 x 841 mm)
Plot scale : 1:1
Plot área: Extents
Plot Offset: Center the Plot

What is plot offset x value?