d.syla
Quiz by , created more than 1 year ago

Cisco 500-007 Part 1

58
0
0
d.syla
Created by d.syla over 8 years ago
Close

Cisco 500-007

Cisco 500-007

Question 1 of 64

1

You have configured your Cisco TelePresence Codec C90 but discover unwated noise during use. What best practice will help avoid this problem.

Select one of the following:

  • Connect only one device at a time ot an input and avoid daisy -chaining

  • Recycle the power on your system after adding each additional input

  • If you are not using an input, turn it off.

  • Daisy-chain additional devices using a serial cable to provide separate power supplies

Explanation

Question 2 of 64

1

Which two letters represent input connections on the Cisco Telepresence codec c90

Select one or more of the following:

  • A

  • B

  • C

  • D

Explanation

Question 3 of 64

1

You want to reconfigure the H.323 and Sip settings using the remote control on the Cisco TelePresence Codec C90. Which menu allows you to do this?

Select one of the following:

  • Audio input levels

  • IP Settings

  • Advanced Configuration

  • protocol configuration

Explanation

Question 4 of 64

1

What do you need to do before an endpoint can place or receive H.323 calls using a URL address

Select one of the following:

  • Register the endpoint to the SIP server

  • Register the endpoints to the gatekeeper

  • Register the endpoint to the gatway

  • Register the endpoint to the Cisco TelePresence MCU

Explanation

Question 5 of 64

1

You are installing a high-definition (720p or 1080p) monitor on the Cisco TelePresence Codec C90. Which of the outputs that are represented by letters in the exhibit should you use.

Select one of the following:

  • A or B

  • A or D

  • A or E

  • B or C

  • D or E

Explanation

Question 6 of 64

1

While on a call, using the remote control, how do you add an additional participant to a call on your MultiSite-enabled endpoint?

Select one of the following:

  • Press the home button to return to the menu, and select the add participant button

  • Press and hold the End Call key to bring up the dialing menu.

  • Press and hold the Call key to bring up the dialing menu

  • Press the Call key, and choose or dail the number of the additional participant

Explanation

Question 7 of 64

1

Which three are true statements regarding the Cisco TelePresence endpoint product set? (Choose 3)

Select one or more of the following:

  • The MX200 and MX300 are all-inclusive systems and do not require additional AV components

  • The MX200 and MX300 are integrator codec systems and require additional AV components

  • The EX60 and EX90 are room-based TelePresence systems intended for use in board rooms

  • The C90 is a high end integrator codec

  • The EX90 is an integrator codec

  • The C40 is a basic integrator codec supporting dual monitors

Explanation

Question 8 of 64

1

What are the two methods for pairing an 8-inch Cisco Telepresence touch panel to a Codec C90? ( Choose two)

Select one or more of the following:

  • Plug the cable that is attached to the Touch panel directly into the back of the Codec C90

  • Plug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90

  • Plug the provided Ethernet cable from the Touch panel power supply into the Lan and pair over the network.

  • Use the built-in wireless on the Touch panel to pair over the network

Explanation

Question 9 of 64

1

Which statement is true regarding passwords on a Cisco TelePresence MX, EX, C Series or SX20 device?

Select one of the following:

  • The device ships from factory with the admin account enabled, with no password

  • The device ships from factory with the admin account enabled, with a default password of Cisco.

  • The device ships from factoractory with admin account enabled, with a default password of tandberg

  • The devices ships from factory with the root account enabled, with no password

Explanation

Question 10 of 64

1

When configuring a Cisco TelePresence EX, MX, or C Series devices, which two statements are true? (Chose two)

Select one or more of the following:

  • The unit can be completely configured from the web interface.

  • If available, the TRC5 remote control can be used to completely configure the unit

  • The API must be used in order to configure the unit

  • The Touch panel can be used to completely configure the unit.

Explanation

Question 11 of 64

1

If the user purchases the Cisco TelePresence touch panel, which two statements are true? (Choose Two)

Select one or more of the following:

  • Both the TRC5 remote and the Touch panel can be used simultaneously.

  • Either the TRC5 remote control or the Touch panel can be used, but not both simultaneously

  • The Touch panel should be used to make calls, but the TRC5 remote control should be used to configure the unit.

  • The web interface can be used to configure the unit

Explanation

Question 12 of 64

1

If you do not have the Premium Resolution option installed on a Cisco TelePresence endpoint, what is the maximum resolution that you can transmit and receive?

Select one or more of the following:

  • 1080p30

  • 720p60

  • 720p30

  • Standard definition resolutions only

Explanation

Question 13 of 64

1

When using the Cisco TelePresence Touch panel with a Codec C90, which administrator setting can you access?

Select one or more of the following:

  • all of the same administrator settings as when using the TRC5 remote.

  • a limited subset of the administrator settings compared with using the TRC5 remote

  • none of the Administrator settings

  • only the custom video layout settings

Explanation

Question 14 of 64

1

What can you see on the Status > Registrations > by device page?

Select one or more of the following:

  • currently registered SIP and H.323 devices

  • all devices that were registered for SIP or H.323 since the last reboot

  • currently registered H.323 devices only

  • Currently registered SIP devices only

Explanation

Question 15 of 64

1

Which two settings can be configured using the serial connection when you are running the TelePresence VCS install wizard? (Choose 2)

Select one or more of the following:

  • Device name

  • device ID number

  • IP address

  • password

  • default video codec

Explanation

Question 16 of 64

1

Which feature or features will work on a new Cisco telePresence VCS as soon as the ip configuration is done.

Select one of the following:

  • H.323

  • H.323 and SIP

  • H323, SIP, and interworking

  • H.323, SIP, Interworking, and firewall traversal

Explanation

Question 17 of 64

1

Which of these options shows the methods that are available to configure a Cisco VCS appliance at initial installation

Select one of the following:

  • CLI over serial port, web interface keyboard and monitor

  • CLI over serial port, web interface, LCD panel

  • CLI over serial port, web interface, boot disk

  • Using the Cissco Prime Collaboration Manager, after running System Discovery, to discovery the newly added Cisco VCS

Explanation

Question 18 of 64

1

The Cisco VCS Starter Pack Express supports which two features that are not found in a Cisco VCS Control? (Choose two)

Select one or more of the following:

  • jabber for Ipad support

  • Expressway server

  • local device authentication

  • built-in provision

Explanation

Question 19 of 64

1

In the SIP configuration, which two items need to match in the Cisco TelePresence VCS configuration and the endpoint configuration? ( Choose two)

Select one or more of the following:

  • Service Prefix

  • Cisco VCS IP address

  • DNS Server

  • SIP domain

Explanation

Question 20 of 64

1

Which two inter-working functions are supported on the Cisco VCS (Choose Two)

Select one or more of the following:

  • SIP-to-H.323

  • IPv4-to-IPv6

  • H.323-to-H.320

  • firewall traversal

Explanation

Question 21 of 64

1

Which statement is true when the H.323 and SIP inter working is set to on in the Cisco TelePresence VCS?

Select one of the following:

  • The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway regardless of whether one of the end points is locally registered.

  • The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway only if one of the endpoints is locally registered.

  • The Cisco TelePresence VCS will not act as a SIP-to-H.323 gateway.

  • The Cisco TelePresence VCS will permit all traffic from any H.323 or SIP endpoint that is registered locally

Explanation

Question 22 of 64

1

Which type of account needs to be set up to create a Csico TelePresence soft client (such as Cisco Jabber or Movi)user if you are using the Cisco TelePresence VCS Expressway Starter Pack?

Select one of the following:

  • a local FindMe account on the Cisco VCS

  • a local admin account on the Cisco VCS

  • an LDAP user account on Active Directory

  • an LDAP FindMe account on Active Directory

Explanation

Question 23 of 64

1

Which of these must be enabled to set up a Cisco TelePresence soft client (such Cisco Jabber or Movi) on a Cisco TelePresence VCS Expressway Starter Pack?

Select one of the following:

  • SIP

  • H.323

  • Interworking

  • Multiway

Explanation

Question 24 of 64

1

Which two of these are required for restoring a backup to another Cisco VCS? (Choose Two)

Select one or more of the following:

  • The same version of software of as the original Cisco VCS

  • the same basic IP address settings

  • an empty configuration on the Cisco vcs

  • the same option keys

Explanation

Question 25 of 64

1

How are firewall traversal connections established between the Cisco TelePresence VCS expressway and Control?

Select one of the following:

  • The traversal client establishes connections outbound to the traversal server

  • The traversal server establishes connections inbound to the traversal client

  • Connections are established in both directions from the traversal server to the traversal client

  • The traversal server nogotiaties acceptable connection prots with the firewall

Explanation

Question 26 of 64

1

Which command is used to set the IP configuration for a Cisco TelePresence MCU 5300

Select one or more of the following:

  • Status IP address netmask default GW

  • xconfigure IP addresss netmask default GW

  • static A IP address netmask default GW

  • set IP address netmask default GW DNS server address

Explanation

Question 27 of 64

1

If the zone is a VCS firewall traversal solution are established, what else is needed before connections can be established in both directions?

Select one of the following:

  • A call policy must be established

  • VCS serach rules must be created for each zone

  • The VCS control and the VCS expressway must be neightbored

  • Transforms must be created in the VCS traversal server zone

Explanation

Question 28 of 64

1

What does an endpoint sysrtem user to navigate the Auto Attendant menu on the Cisco TelePresence MCU?

Select one of the following:

  • FECC or DTMF navigation

  • a special remote that came with the Cisco TelePresence MCU

  • Only FECC; DTMF is not supported

  • web interafce of the endpoint

Explanation

Question 29 of 64

1

If an auto attendant has a numeric id of 543 and the Cisco TelePresence MCU has a prefix of 62 and a domain of cisco.demo, which two of these will be registered on the Cisco TelePresence VCS, assuming that SIP and H.323 registration have been selected? (Choose two)

Select one or more of the following:

  • 62543

  • 543@cisco.demo

  • 543

  • 62543@cisco.demo

  • 543@62.cisco.demo

Explanation

Question 30 of 64

1

How can you register a prefix to route all SIP calls beginning with that prefix to the Cisco TelePresence MCU?

Select one or more of the following:

  • You cannot; all SIP addresses must be registered individually

  • The H.323 prefix is automatically used

  • You cannot; you need to use a suffix in the form of a domain.

  • The username is used as the suffix

Explanation

Question 31 of 64

1

What does the Cisco Telepresence MCU service prefix do?

Select one of the following:

  • Ensures that all H.323 calls beginning with perfix are routed to the Cisco TelePresence MCU

  • is added to all aliases before registration

  • diverts calls to the default auto attendant

  • identifies which serves the Cisco TelePresence MCU will offer in each configured meeting room

Explanation

Question 32 of 64

1

How does an administrator move an endpoint efficiently from one conference to another Cisco TelePresence MCU ?

Select one or more of the following:

  • From the Move Participants screen, right-click the participant and select the new conference from the drop-down list

  • From the Move Participants screen, drag and drop a participant from once conference to another

  • From the Conference menu, select the participant, and then select the new conference

  • From the web interace, disconnect the participant, and then reconnect to the new conference.

Explanation

Question 33 of 64

1

By which two ways can an endpoint join a conference on the Cisco TelePresence MCU ? (Choose two)

Select one or more of the following:

  • dialing a registered alias for the conference

  • dialing the auto attendant and navigating to the conference

  • dialing an endpoint that is already in the conference

  • dialing all endpoints that are required in the conference

  • dialing the PIn number of the conference

Explanation

Question 34 of 64

1

What effect does the 'Prefix for MCU Registration' have on Cisco TelePresence MCU registration?

Select one or more of the following:

  • The prefix replaces the domain if the prefix is dialed

  • The prefix is placed in front of all SIP URI's

  • Anything that is dialed with the perfix will be routed to the Cisco TelePresence MCU

  • The prefix is placed in front of all E.164 aliases

Explanation

Question 35 of 64

1

What is the maximum port capacity of the 5320 MCU?

Select one of the following:

  • 5HD+ OR 10HD OR 20SD OR 24nhd

  • 1HD+ or 2HD or 4SD or 8nHD

  • 10HD+ or 20HD or 40SD or 48nHD

  • 20HD+ or 40HD or 80SD or 96nHD

Explanation

Question 36 of 64

1

How many rack units does a Cisco TelePresence MCU 5300 occupy in a standard data center

Select one of the following:

  • 1

  • 2

  • 3

  • 4

Explanation

Question 37 of 64

1

Using the web interface, where can you verify the licensing on a Cisco TelePresence MCU 5300?

Select one of the following:

  • Settings > Upgrade

  • Settings > Conference

  • Settings > Content

  • Status > Help

Explanation

Question 38 of 64

1

How many endpoints can register to the built-in H.323 gatekeeper of a Cisco TelePresence MCU 5300 series device.

Select one of the following:

  • none; there is no built-in gatekeeper

  • 25

  • 100

  • 300

Explanation

Question 39 of 64

1

How should you configure the IP address and default gateway on a Cisco TelePresence MCU 53000 Series device during setup

Select one or more of the following:

  • Conenct an Ethernet cable to the second Ethernet port of the MCU, and point your web browser to 192.168.2.2

  • Console into the serial port in the front panel, and use the static command

  • Use the arrows next to the LCD in the front to change the IP address, subnet mask, and default gateway

  • change it from the Cisco VCS

Explanation

Question 40 of 64

1

How do you upgrade the software of an exisiting installtion with a Cisco TelePresence MCU 5300?

Select one or more of the following:

  • Download the new software, navigate to Maintenance > Upgrade Software, and upload the software

  • Use FTP to access the MCU, browse to the etc/software/upgrade directory, put the new load in and reboot the MCU

  • Navigate to Settings > Upgrade, then follow instructions under Main Software Image.

  • Use an SFTP client to log into the MCU, and place the software in the etc/software/upgrade directory

Explanation

Question 41 of 64

1

How to you obtain a SIP log from the Cisco TelePresence MCU 5300 to send to Cisco TAC for futher analysis?

Select one or more of the following:

  • Navigate to Maintenance > Logs, and the download the log

  • Navigate to Logs > Event Log > SIP Details, and the download the log

  • Navigate to Logs > H.323/SIP Log, click Enable H.323/SIP Logging, and then download the log.

  • Use FTP to access the MCU, go to the directory /etc/logs/sip, and get all of the files in the directory.

Explanation

Question 42 of 64

1

What is one way that a conference participants screen layout be changed without affecting other participants

Select one or more of the following:

  • Via the participant settings in the MCU 5300 web interface

  • via the conference settings in the MCU 5300 web interface

  • by the nominated chair endpoint using FECC

  • by moving the participant into a different meeting using the MCU 5300 web interface

Explanation

Question 43 of 64

1

What are two ways that a conference participant can be disconnected from a conference? (Choose Two)

Select one or more of the following:

  • by using the MCU 5300 web interface

  • will be automatically disconnected at the end of the allotted time

  • by the auto attendant

  • will be disconnected when the conference exceeds its maximum capacity.

Explanation

Question 44 of 64

1

Before you upgrade your Cisco TelePresence Management Suite, what should you do with your SQL database?

Select one of the following:

  • Save a backup

  • Restore a previous version

  • Set a new username and password

  • Create a second copy

Explanation

Question 45 of 64

1

Which installation option should you choose if you wish to use an external SQL database?

Select one of the following:

  • Complete

  • Custom

  • Advanced

  • Basic

Explanation

Question 46 of 64

1

If you do not have a valid release key, what restrictions will be applied?

Select one of the following:

  • The Cisco TelePresence Management Suite will only manage three systems

  • Installation will fail and the Cisco TelePresence Management Suite will not be installed

  • The Cisco TelePresence Management Suite will only operate for 30 days

  • The SQL database will be purged every 30 days.

Explanation

Question 47 of 64

1

Where would you enter release and option keys into the Cisco TelePresence Management Suite

Select one of the following:

  • in Configuration>General Settings

  • On the portal page

  • through the release key generator in a terminal session on the server

  • on the Cisco TelePresence Manager Suite server maintenance page

Explanation

Question 48 of 64

1

When a new conference is booked on the Cisco TelePresence Management Suite, which setting instructs the endpoint or Cisco TelePresence MCU to call a participant at the time of a conference

Select one of the following:

  • Manual

  • Call-in Only

  • Reverse Call

  • Automatic

Explanation

Question 49 of 64

1

By which three ways can systems be added in the Cisco TelePresence Management Suite? (Choose three)

Select one or more of the following:

  • by preregistering systems

  • from a .csv file

  • by importing from a Cisco TelePresence VCS

  • by user-configured name

  • by dialing an endpoint

  • by IP address.

  • from a list of previously discovered systems

Explanation

Question 50 of 64

1

You want to obtain specific configuration details from each of the systems that are regisitered to your Cisco TelePresence Management Suite. Where can you do this ?

Select one or more of the following:

  • Choose Navigator from the Systems menu

  • Choose System Overview from the System menu

  • Run System tracking from the systems menu

  • Connect to the Cisco TelePresence Management Suite via a console connection and use show commands

Explanation

Question 51 of 64

1

After you create a phone book in the Cisco TelePresence Management Suite, which method should you use to populate it with entries

Select one of the following:

  • Connect the phone book to a phone book source

  • Manually type entries into the phone book.

  • Connect the phone book to a gatekeeper

  • Upload a file in .mdf format

Explanation

Question 52 of 64

1

The Cisco TCS provides which two functions ? (Choose two)

Select one or more of the following:

  • records and standards-based video conferencing session

  • records video from IP-based encoders

  • can stream out live TelePresence sessions over IP networks

  • allows users to upload video for conversion into H.264 or MP4

Explanation

Question 53 of 64

1

Which two statements about the Cisco TCS are correct? ( Choose two)

Select one or more of the following:

  • It contains an internal gatekeeper

  • it allows creators to edit videos

  • it runs on the window operating system

  • it runs on the linux operating systems

Explanation

Question 54 of 64

1

What are two ways to set the IP netowrk information on the CIsco TCS? (Choose two)

Select one or more of the following:

  • DHCP

  • statically set on its windows operating system

  • statically set on its linux operating system

  • automatically assigned by the cisco telepresence managment server

Explanation

Question 55 of 64

1

What is the effect of registering the Cisco TCS with the Cisco VCs using H.323 gateway mode?

Select one of the following:

  • The Cisco TCS does not support this type of registration.

  • An unlimited number of recording aliases can be assigned

  • The cisco tcs is prevent from making an outbound call to a Cisco MCU

  • The Cisco TCS can reaverse calls between SIP and H.323

Explanation

Question 56 of 64

1

Which two statments about Cisco TCS recording aliases are true? ( Choose two)

Select one or more of the following:

  • System recording aliases can only be dialed by the site manager (administrator)

  • Any recording alias can be triggered by dialing its assigned URI or E.164 number

  • Recordings resulting from a personal recording alias can only be managed by their creator.

  • final recordings made from a recording alias cannot be modified

Explanation

Question 57 of 64

1

Which of these constitutes a Cisco TCS recording alias?

Select one of the following:

  • A recording template, a media server configuration, and a call configuration.

  • a media server configuration and a call configuration

  • a recording template and a media server configuration

  • a recording template and a call configuration

Explanation

Question 58 of 64

1

Which two statements about Cisco TCS users are true? (Choose two)

Select one or more of the following:

  • Users with the creator role can create their won recording aliases

  • Local users have only limited Cisco TCS permissions

  • Users can be assigned to the Cisco TCS through an Active Directory LDAP server

  • User permissions are based on one of three assignable roles

Explanation

Question 59 of 64

1

Which two statements about Cisco TCS recording templates are true? (Choose Two)

Select one or more of the following:

  • Every recording alias contains one recording template

  • They provide a way to produce recordings without a recording alias

  • They must always contain a media server configuration

  • There can only be one system recording template

Explanation

Question 60 of 64

1

Which statement about playing back Cisco TCS recording is true ?

Select one or more of the following:

  • It is not possible to play back Cisco TCS recordings from a video enpoint

  • The Cisco TCS must register to the Cisco VCS as an H.323 gateway in order to play back recordings on video endpoints

  • The Cisco TCS will automatically assign an E.164 playback number to recordings if it is registered as an H.323 terminal

  • The Cisco TCS must register to the Cisco VCS using SIP in order to play back on any video endpoint

Explanation

Question 61 of 64

1

In which two locations can Cisco TCS recordings be view? ( Choose two)

Select one or more of the following:

  • directly on the cisco TCS web portal

  • in the Cisco TelePresence Managements server

  • on a video endpoint

  • on the Codec C90 touch panel

Explanation

Question 62 of 64

1

Which two pieces of troubleshooting information does the Cisco TCS provide? ( Choose two)

Select one or more of the following:

  • log messages that can be accessed by the site manager through the CLI

  • recording alias processing progress

  • error logs that only Cisco TAC can access

  • log messages that can be accessed by the site manager through the web interface

Explanation

Question 63 of 64

1

Which two of these can be found by navigating to TCS Diagnostic > Server Overview in the cisco TCS web interface? ( Choose Two)

Select one or more of the following:

  • option key information

  • recording port activity status

  • Cisco VCS registration status

  • which cisco tms is managing the TCS

Explanation

Question 64 of 64

1

Cisco TCS recordings can be encoded into which two video formats? ( Choose two)

Select one or more of the following:

  • MPEG-4 for flash and QuickTime

  • WMV

  • H.262

  • Sorensen VP8 for flash

Explanation

Previous
Check answer
Next