General Rules. Test 1

Question 1 of 24

1

What can be done to modify the car remotely using telemetry?

Select one or more of the following:

You can stop the car.
You can make adjustments to the engine control unit (ECU).
You can't do anything, just acquired data.

Explanation

Question 2 of 24

1

Wich statements are true?

Select one of the following:

In case of rain is forbidden to use telemetry because of the high voltages are needed.
The telemetry system is not necessary to shut down with the other electronic systems, it can always be turned on.
Telemetry is optional.
All are false

Explanation

Question 3 of 24

1

How many Master Switches must be in the vehicle?

Select one or more of the following:

1
2
3

Explanation

Question 4 of 24

1

The brake light itself has to have a black background and a rectangular shape.

Select one of the following:

True
False

Explanation

Question 5 of 24

1

Which is the international electrical symbol?

Select one or more of the following:

Red spark on a white-edged blue triangle.
Red spark on a yellow-edged blue triangle.
Blue spark on a white-edged red square.

Explanation

Question 6 of 24

1

The primary master switch must:

Select one of the following:

Be located on the (driver’s) left side of the vehicle, in proximity to the Front Hoop, at leg height and be easily actuated from outside the car.
Be located on the (driver’s) right side of the vehicle, in proximity to the Main Hoop, at shoulder height and be easily actuated from outside the car.
Be located on the (driver’s) right side of the vehicle, in proximity to the Front Hoop, at shoulder height and be easily actuated from outside the car.

Explanation

Question 7 of 24

1

The cockpit-mounted master switch must be located to provide easy actuation by the driver in an emergency or panic situation.

Select one of the following:

True
False

Explanation

Question 8 of 24

1

Which statement is true?

Select one of the following:

The cockpit-mounted master switch must be of a rotary type and must be direct acting,
The cockpit-mounted master switch must be a push/pull Emergency switch.
The cockpit-mounted master switch shouldn't act through a relay.

Explanation

Question 9 of 24

1

How many hydraulics systems must have our car?

Select one of the following:

1 circuit.
2 circuit.
4 circuit.
It’s indifferent.

Explanation

Question 10 of 24

1

Which is the maximum cc permitted?

Select one of the following:

600 cc
610 cc
500 cc
1000 cc

Explanation

Question 11 of 24

1

Which kind of coolant fluid can we use?

Select one of the following:

Oil.
Water + glycol additives.
Water.
It’s indifferent.

Explanation

Question 12 of 24

1

Which is the maximum diameter permitted for the restrictor?

Select one of the following:

19 mm
20 mm
21 mm
23 mm

Explanation

Question 13 of 24

1

For the Design-Event the vehicle has to fulfills the following conditions:

Select one of the following:

It has to be ready-to-run.
It only has to be fully assembled.
It has to be in finished condition.
All are true.

Explanation

Question 14 of 24

1

What signifies a BLUE FLAG during the FSAE Endurance Event?

Select one of the following:

Your session has been completed. Exit the course at first opportunity.
Pull into the designated passing zone to be passed by a faster competition. Obey the corner workers hand signals at the end of the passing zone to merge into competition.
Pull into the penalty box for discussion with the Chief Marshall/Director of Operations or other official concerning an incident. A time penalty may be assessed for such incident.
Danger, SLOW DOWN, be prepared to take evasive action, something has happened beyond the flag station. NO PASSING unless directed by the corner workers.

Explanation

Question 15 of 24

1

Which is the minimum radius for the forward facing edges on the bodywork?

Select one of the following:

45
15
35
38

Explanation

Question 16 of 24

1

No part of any aerodynamic device can be: (Chose the false one)

Select one of the following:

Further rearward than 350mm of the rearward of the rear of the rear tires.
Any part of the aerodynamic devices can be higher than 1,2m. from the ground.
Power ground effects are prohibited.
Aerodynamic devices can be configurable during the FSAE competition.

Explanation

Question 17 of 24

1

Which is the basic form of the chassis?

Select one of the following:

Main hoop, front hoop, Roll hoop braces and supports, Side impact structure and Templates.
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure, Front bulkhead, Front bulkhead support system and Templates.
Main hoop, front hoop, Roll hoop braces and supports, Side impact structure, Front bulkhead, Front bulkhead support system.

Explanation

Question 18 of 24

1

How many templates are required and how are they held?

Select one of the following:

2; horizontal and vertical.
3; 2 horizontal and vertical.
1; horizontal.
1; vertical.

Explanation

Question 19 of 24

1

Where do you must locate bateries, master cylinders, hydraulics reservoirs (non-crushable objects)?

Select one of the following:

Front bulkhead.
Front bulkhead and bulkhead.
Bulkhead.

Explanation

Question 20 of 24

1

Which dimension must have impact atenuator?

Select one of the following:

200 wide 100 high 200 long.
100 wide 100 high 200 long.
100 wide 200 high 200 long.
200 wide 100 high 100 long.

Explanation

Question 21 of 24

1

The distance between the front axle and the rear axle:

Select one of the following:

Is called track and it must be at least 75% shorter than wheelbase.
Is called wheelbase and it must have at least 1525 mm.
Is called wheelbase and it must be a maximum of 1675 mm long.
B and C are both correct.

Explanation

Question 22 of 24

1

How vehicle rollover stability is evalued during the scrutineering?

Select one of the following:

Measuring the width and height of the vehicle.
The vehicle has to take a 180º turn and 5 metres of radius to 50 km/h.
Using a tilt table.
A and C are both correct.

Explanation

Question 23 of 24

1

Which statement about suspension system is true? (only one)

Select one of the following:

Suspension system is optional but recommended.
The usable wheel travel must be of at least 45,4 mm.
The bottom part of the chassis must be at least at 10 mm above the ground in a bump.
The usable wheel travel must be of at least 50,8 mm.

	Created by salva_ls over 8 years ago