INSTRUCTION MANUAL FOR POWER BOX AND FLU BOX AND SOUND BOX

Step One take everything out of case

Step Two check your parts list

Step Three if you have everything move on to step five if not follow step four

Step Four Cuss and then cuss some more

Step Five Put everything together

Step Six Take the power box and cables and lay them to the side

Step Six Take serial cable A and connect to FLU BOX

Step Seven Take and choose your power method and If 12 volts DC is chosen if battery power is chosen flip switch labeled battery power to the on position and make sure indicator light is on and skip step eight.

Step Eight take twelve volt plug adapter plug it in and then connect it to your main power box a indicator light should come on.

Step Nine if everything does not work go over step four again.

Step Ten decide if you want the sound box if no skip step 10,11,12,13 If yes then follow along

Step Eleven take sound box and 3.5mm auxiliary cable and plug into aux out . NOTE YOU MUST RUN 12 VOLTS DC FOR SOUND BOX TO WORK.

Step Twelve take serial cable B and plug it into open serial port on FLU BOX. Then on flu box turn on the switch that says SBU

Step Thirteen take a laptop with the count down voice and plug in the aux cable to laptop.

Step Fifteenth take and roll out your two 50ft cat five cables and connect two male ends to control unit then connect the other two to the firework lighter there are eight.

Step Sixteen turn key into on position and then you should get a indicator light.

Step Seventeen turn on main power switch label FWI

Step Eighteen triple check everything and every connection and then check off your safety list

	Created by austin stadler almost 10 years ago

EXAM STUDY GUIDE