ACMP- Aruba Certified Mobility Professional

Question 1 of 90

1

Which command will show all client association history?

Select one of the following:

A. Aruba-6000# show mobile trail current (ip address)
B. Aruba-6000# show ip mobile trail (ip address)
C. Aruba-6000# show ap client status (mac address)
D. Aruba-6000# show current client ip (ip address)

Explanation

Question 2 of 90

1

Which Aruba controllers are able to provide IEEE 802.3af POE? (Choose all the correct answers.)

Select one or more of the following:

A. 3200
B. 620
C. 650
D. 6000

Explanation

Question 3 of 90

1

The screen captures above show the 802.1X authentication profile and AAA profile settings
for a VAP.
If machine authentication fails and user authentication fails, which role will be assigned?

Select one of the following:

A. employee
B. guest
C. contractor
D. Captive Portal
E. Logon
F. no role will be assigned

Explanation

Question 4 of 90

1

Which of the following charts are available for selection in Spectrum Dashboard for AP125?

Select one or more of the following:

A. FFT Duty Cycle
B. Channel Quality
C. Active Devices by Channel
D. Number of Spectrum Monitors

Explanation

Question 5 of 90

1

A user connected to a Captive Portal VAP successfully. When the user opens their browser
and tries to access their homepage, they get redirected as expected to another URL on the
Aruba Controller. However, they see an error message that web authentication has been
disabled. What might be a cause of this?

Select one of the following:

A. The Captive portal profile has not been assigned to the initial role
B. The Captive portal profile has not been assigned to the AAA profile
C. A server group has not been assigned to the captive portal profile
D. An initial role has not been assigned to the AAA profile

Explanation

Question 6 of 90

1

Which describe "roles" as used on Aruba Mobility Controllers? (Choose all the correct answers.)

Select one or more of the following:

A. Roles are assigned to users.
B. Roles are applied to interfaces.
C. Policies are built from roles.
D. A user can belong to only one role at a time.

Explanation

Question 7 of 90

1

Refer to the above screen capture. By default, which switch's internal database will be used for user authentication?

Select one of the following:

A. Controller 10.1.11.100 only
B. Controller 10.1.11.101 and 10.254.1.3 only
C. All three Controllers
D. None

Explanation

Question 8 of 90

1

What are aliases used for?

Select one of the following:

A. improve performance
B. simplify the configuration process
C. Tie IP addresses to ports
D. assign rules to policies

Explanation

Question 9 of 90

1

Where are Aruba Vendor Specific Attributes (VSA) programmed?

Select one of the following:

A. controller
B. client
C. authentication server
D. Internal user database

Explanation

Question 10 of 90

1

An Aruba based network has a Master and three local controllers. No APs terminate on the Master controller. IDS is desired, so the administrator wants to install the "RFProtect license."
On which controller should the license be installed?

Select one of the following:

A. master controller since it performs the IDS analysis
B. the local controllers since the APs terminate there
C. all of the controllers
D. this isn't the correct license for this purpose

Explanation

Question 11 of 90

1

In an Aruba based system, the L3 mobility tunnel exists between the home agent and
which other element?

Select one of the following:

A. the default gateway
B. the remote AP
C. the foreign agent
D. the mobile node

Explanation

Question 12 of 90

1

A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn't yet transitioned to the AP active table in the controller. The customer suspects that the AP is not setting up its VPN connection successfully. Which of the following commands might be useful in troubleshooting this? Select all that apply.

Select one or more of the following:

A. Logging level debugging security process localdb
B. Logging level debugging security process l2tp
C. Logging level debugging security process dot1x
D. Logging level debugging security process crypto

Explanation

Question 13 of 90

1

What is the maximum number of campus APs supported by a 620 controller?

Select one of the following:

A. 32
B. 8
C. 16
D. 24

Explanation

Question 14 of 90

1

The permanent licenses on the controller will be deleted with the use of which command?

Select one of the following:

A. delete license
B. write erase
C. Licenses cannot be deleted once activated
D. write erase all

Explanation

Question 15 of 90

1

View the Server group and User Roles screen shots above.
A user associated to an SSID with 802.1x using this server group. Radius NY returned a
standard radius attribute of filter-Id with a value of employee. What Role will the user
get?

Select one of the following:

A. The User will get the Emp Role
B. The user will get the 802.1x authentication default Role
C. The User will get the employee Role
D. The User will get the Employee Role
E. The User will get the initial Role

Explanation

Question 16 of 90

1

Which of the statements below are TRUE regarding ARM's Spectrum Load Balancing feature? (Choose all correct answers)

Select one or more of the following:

A. Available only on 5GHz radios
B. Disabled by default
C. Balances client load across available channels/APs
D. Enabled by default

Explanation

Question 17 of 90

1

Which of the following licenses are consumed by RAP?

Select one of the following:

A. AP license
B. PEF-NG license
C. PEF-V license
D. No license required

Explanation

Question 18 of 90

1

The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat).
Which is a common use of this statement in an Aruba configuration?

Select one of the following:

A. provide a single source IP address for users in a role
B. redirect Captive Portal HTTP sessions
C. redirect Access Points to another Aruba controller
D. provide IP addresses to clients

Explanation

Question 19 of 90

1

When configuring ports in the configuration wizard, which of the following are not options for configuration?

Select one or more of the following:

A. Inter-VLAN routing
B. Source NAT
C. Trusted
D. LACP

Explanation

Question 20 of 90

1

In the above screen capture, the administrator notes that the "Save As" and "Apply" buttons are grayed out and have no action.
What is the cause of the problem?

Select one of the following:

A. attempting to make changes on a Master Switch
B. attempting changes on a Local Switch
C. does not have administrative rights to perform these actions
D. does not have the correct software license

Explanation

Question 21 of 90

1

View the Server group screenshot above
A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server Radius Miami. There is no Radius synchronization. What happens when the user attempts to authenticate?

Select one of the following:

A. The controller recognizes the users Domain and sends the authentication request directly to Radius Miami.
B. The request is initially sent to RadiusNY1 then RadiusNY1 redirects, the controller, to send the authentication request to Radius Miami
C. RadiusNY1 receives the request and returns a deny. No other action is taken.
D. RadiusNY1 receives the request and returns a deny. The authentications request will then be sent to Aruba Certified Mobility Professional 6.1.

Explanation

Question 22 of 90

1

View the Server group and User Roles screen shots above.
A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of employee. The user was placed in the guest Role. What statements below are correct?

Select one or more of the following:

A. The user was placed in the 802.1x authentication default Role guest
B. The user was placed in the initial Role guest
C. Role derivation failed because roles are case sensitive
D. Role derivation failed because the incorrect operation “value-of” was used
E. 802.1x authentication failed so the user was automatically placed in the guest Role

Explanation

Question 23 of 90

1

Refer to the following configuration segment for this item.

Ip access-list session a new one
user network 10.1.1.0 255.255.255.0 any permit
user host 10.1.1.1 any deny user any any permit

Based on the above Aruba Mobility Controller configuration segment, which statements best describe this policy? (Choose all the correct answers.)

Select one or more of the following:

A. The rule user host 10.1.1.1 any deny is redundant because of the implicit deny all at the end.
B. The rule user network 10.1.1.0 255.255.255.0 any permit is redundant because of the user any any permit at the end.
C. The two rules user network 10.1.1.0 255.255.255.0 any permit and user host 10.1.1.1 any deny need to be re-sequenced.
D. This list is fine as is.

Explanation

Question 24 of 90

1

Which match condition can be used by a server derivation rule?

Select one of the following:

A. greater than
B. less than
C. inverse of
D. contains

Explanation

Question 25 of 90

1

When configuring a server group containing 3 servers, a customer chooses 'fail through mode'.
What other feature has to be enabled on the controller for this to work?

Select one of the following:

A. Machine authentication
B. EAP Termination
C. Server group fall through mode
D. MAC authentication

Explanation

Question 26 of 90

1

What do you need to generate a feature license key for an Aruba controller?

Select one of the following:

A. controller's MAC address and the feature description
B. controller's MAC address and the certificate number
C. controller's Serial Number and the feature description
D. controller's Serial Number and the certificate number

Explanation

Question 27 of 90

1

Which may be applied directly to an interface? (Choose all the correct answers.)

Select one or more of the following:

A. Access List (ACL)
B. Firewall Policy
C. Roles
D. RF Plan Map

Explanation

Question 28 of 90

1

When a user first associates to the WLAN, what role are they given?

Select one of the following:

A. the guest role
B. the stateful role
C. the initial role in the server group profile
D. The initial role in the AAA profile

Explanation

Question 29 of 90

1

What new firewall action was added specifically for use with Aruba's Content Security Service?
VisualRF supports import of floor plans from:

Select one of the following:

A. dst-nat
B. dual-nat
C. route dst-nat
D. redirect to tunnel

Explanation

Question 30 of 90

1

What Wizards can be used to create a new AP Group?

Select one or more of the following:

A. AP Wizard
B. Controller Wizard
C. WLAN/LAN Wizard
D. License Wizard
E. AP configurations Wizard

Explanation

Question 31 of 90

1

A customer has configured a 3000 controller with the following commands:
Vlan 55
Vlan 56
Vlan 57
Interface gigabitethernet 1/0
switchport mode trunk
switchport trunk native vlan 55
switchport trunk allowed vlan 55-57
Which of the following sentences best describes this port?

Select one of the following:

A. All traffic in vlan 55 will be dropped and all traffic in vlan 56 and 57 will be trunked with and 802.1Q tag
B. All traffic in vlan 55, 56 and 57 will be trunked with an 802.1Q tag
C. All traffic in vlan 55 will be sent with an 802.1Q tag while vlan 56 and 57 traffic will be trunked untagged
D. All traffic in vlan 56 and 57 will be sent with an 802.1Q tag while vlan 55 traffic will be trunked untagged

Explanation

Question 32 of 90

1

What cannot be configured from the Initial Configuration wizards?

Select one of the following:

A. Controller name.
B. Syslog server and levels.
C. User firewall policy.
D. User derivation rules.

Explanation

Question 33 of 90

1

Refer to the following configuration segment for this item.
netdestination "internal"
no invert
network 172.16.43.0 255.255.255.0 position 1
range 172.16.11.0 172.16.11.16 position 2
ip access-list session "My-Policy"
alias "user" alias "internal" service_any permit queue low
A user frame is evaluated against this access-list with the following attributes:
Source IP: 172.17.49.3 Destination IP: 10.100.86.37 Destination Port: 80
Referring to the above file segment, how will the frame be handled by this access-list?

Select one of the following:

A. The frame will be dropped because of the implicit deny all at the end of the netdestination definition.
B. The frame will be dropped because of the implicit deny all at the end of the access list.
C. The frame will be forwarded because of the implicit permit all at the end of the access list.
D. The frame will be passed because there is no service specified in the access list.
E. The frame will be dropped because there is no service specified in the access list.

Explanation

Question 34 of 90

1

The Aruba controller's Command Line Interface can be accessed from WITHIN the browser based Web User Interface using which method?

Select one of the following:

A. It's not possible to access the CLI from within the WebUI
B. Embedded Telnet client
C. Java based SSH client
D. Proprietary serial over Ethernet client

Explanation

Question 35 of 90

1

An Aruba controller can be configured to support which CLI based remote access methods?

Select one of the following:

A. RSH
B. Telnet
C. SSH
D. Telnet and SSH
E. SSH and RSH

Explanation

Question 36 of 90

1

By default, which CLI based remote access method is enabled on Aruba controllers?

Select one of the following:

A. rsh
B. Telnet
C. SSH
D. Telnet and SSH
E. Telnet, SSH and rsh

Explanation

Question 37 of 90

1

Masters communicate configuration information with locals using which tunnel type?

Select one of the following:

A. GRE
B. IP in IP
C. Provisión Tunnel Protocol
D. IPSec

Explanation

Question 38 of 90

1

In all unmodified default AAA profiles, in which default initial role is the user placed?

Select one of the following:

A. trusted-ap
B. guest
C. pre-guest
D. logon

Explanation

Question 39 of 90

1

Which tunnel protocol is used between controllers to support L2 mobility in an Aruba environment?

Select one of the following:

A. Basic IP
B. GRE
C. IPinIP
D. Mobile IP
E. None of the above

Explanation

Question 40 of 90

1

How does the ARM's Band Steering feature encourage 5GHz capable clients to move/connect to the 5GHz radios of Aruba APs?

Select one of the following:

A. ARM “hides” the 2.4GHz radios from 5GHz capable clients
B. ARM utilizes third party software on the wireless clients
C. Current Wi-Fi chipset firmware supports this by default
D. It's not possible the move clients to 5GHz radios when they can see both 2.4 and 5GHz APs

Explanation

Question 41 of 90

1

What type of license is required on the Aruba S3500 for tunneled node operation?

Select one of the following:

A. PEF-NG
B. No license is required
C. Tunneled node license for each wired AP
D. Tunneled node license for each S3500

Explanation

Question 42 of 90

1

ip access-list session anewone
user network 10.1.1.0 255.255.255.0 any permit
user host 10.1.1.1 any deny
user any any permit
Referring to the above portion of a Mobility Controller configuration file, what can you conclude?
(Choose all of the correct answers.)

Select one or more of the following:

A. This is a session firewall policy.
B. This is an extended Access Control List (ACL).
C. Any traffic going to destination 10.1.1.1 will be denied.
D. Any traffic going to destination 10.2.2.2 will be denied.
E. Any traffic going to destination 172.16.100.100 will be permitted.

Explanation

Question 43 of 90

1

Which method is NOT supported to provision an Aruba thin AP?

Select one of the following:

A. Telnet directly to AP
B. SSH to the AP's controller
C. Web interface to the AP's controller
D. Console to AP

Explanation

Question 44 of 90

1

Which of the following APs do not support dual radio operations?
(Choose all the correct answers.)

Select one or more of the following:

A. RAP - 5
B. AP 125
C. AP 120
D. AP 124

Explanation

Question 45 of 90

1

When roaming, by default which device will decide when to handoff / move to another AP?

Select one of the following:

A. Aruba AP
B. Aruba controller
C. Client PC
D. Radius Server
E. Router

Explanation

Question 46 of 90

1

Referring to the above screen capture, if an administrator desires to change a specific AP into an AM without assigning the AP to a new group, which menus could be used?

Select one of the following:

A. Network > Controller
B. Wireless > AP Configuration
C. Wireless > AP Installation
D. Advanced Services > Wireless
E. Advanced Services > All Profiles

Explanation

Question 47 of 90

1

Which log type should be enabled to troubleshoot IPSec authentication issues on Aruba Controllers?

Select one of the following:

A. Security Logs
B. Management Logs
C. Wireless Logs
D. IDS Logs

Explanation

Question 48 of 90

1

Referring to the above screen capture, on which switch can you create a vlan?

Select one of the following:

A. Controller 10.1.11.100 only
B. Controller 10.1.11.101 and 10.254.1.3 only
C. All three Controllers
D. None

Explanation

Question 49 of 90

1

In a campus environment, where are encryption keys sent or stored when users roam from AP to AP on the same controller using 802.1X?

Select one of the following:

A. sent to the new AP via GRE
B. sent to the new AP vía IPSec
C. stored on the controller
D. stored on the RADIUS server

Explanation

Question 50 of 90

1

What is the best practice regarding licensing for a backup master to support Master Redundancy?

Select one of the following:

A. Backup master only requires the AP license
B. License limits should be the same on primary master and backup Master
C. Licenses are pushed from the primary to the backup Master along with the configuration
D. Backup Master does not require licenses to support master redundancy

Explanation

Question 51 of 90

1

The screen captures above show the 802.1X authentication profile and AAA profile settings
for a VAP.
If machine authentication passes and user authentication passes, which role will be assigned?

Select one of the following:

A. employee
B. guest
C. contractor
D. logon
E. you can't tell

Explanation

Question 52 of 90

1

What additional fields must be configured in the configuration wizard if the controller role is selected as a local instead of a standalone controller?

Select one or more of the following:

A. The Local's SNMPv3 user name and password
B. The Master IP address
C. The Local's loopback address
D. The IPSec PSK for Master/Local communication

Explanation

Question 53 of 90

1

ip access-list session anewone
user network 10.1.1.0 255.255.255.0 any permit
user any any permit
host 10.1.1.1 host 10.2.2.2 any deny
A user sends a frame with the following attributes:
Source IP: 10.1.1.1 Destination IP: 10.2.2.2 Destination Port: 25
Based on the above Mobility Controller configuration file segment, what will this policy do
with the user frame?

Select one of the following:

A. The frame is discarded because of the implicit deny all at the end of the policy.
B. The frame is discarded because of the statement: user host 10.1.1.1 host 10.2.2.2 deny.
C. The frame is accepted because of the statement: user any any permit.
D. The frame is accepted because of the statement: user network 10.1.1.0
E. This is not a valid policy.

Explanation

Question 54 of 90

1

Which of the following statements allows a user to initiate an HTTP session to other devices?

Select one or more of the following:

A. any alias internal-nets svc-dns permit
B. user any svc-http permit
C. user user svc-http permit
D. any any svc-http permit

Explanation

Question 55 of 90

1

When creating a firewall policy, which of the following parameters are required? (Choose all the correct answers.)

Select one or more of the following:

A. Destination
B. Service
C. Source
D. Log
E. Action

Explanation

Question 56 of 90

1

As an admin/root user, what other types of role-based management users can be created on Aruba controllers?
(Choose all the correct answers)

Select one or more of the following:

A. Auditing-compliance user
B. Read only user
C. Location-api-management user
D. Guest provisioning user

Explanation

Question 57 of 90

1

The above diagram has one master and three local controllers.
All controllers are configured with the wireless user VLAN 201. A wireless user associates
with AP 1. Only L2 mobility is enabled.
Which elements will know about this association? (Choose all of the correct answers.)

Select one or more of the following:

A. Local 1
B. Local 2
C. Local 3
D. Master

Explanation

Question 58 of 90

1

Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP?

Select one of the following:

A. Virtual-ap ap mesh-radio-profile ap system profile
B. Wlan ssid-profile ap-system-profile virtual-ap profile
C. Virtual-ap profile ap-system profile aaa profile
D. 802.1X authentication profile wlan ssid-profile virtual-ap profile

Explanation

Question 59 of 90

1

The network administrator wishes to terminate the VPN encryption on the Aruba controller.
When writing a firewall rule to accomplish the task of automatically moving the VPN traffic for the wireless clients from a third party VPN concentrator to an Aruba controller, which action needs to be configured in the rule?

Select one of the following:

A. redirect to ESI group
B. source NAT
C. destination NAT
D. redirect to tunnel

Explanation

Question 60 of 90

1

Which is an Aruba specific DSA that can be used in a user derivation rule?

Select one of the following:

A. user login name
B. authentication server
C. location
D. controller Loopback address

Explanation

Question 61 of 90

1

The reusable wizards are accessible in which one of the following ways?

Select one of the following:

A. On startup through the CLI
B. Through the CLI, after the initial CLI wizard has been completed
C. In the Web UI under maintenance.
D. In the Web UI under configuration.

Explanation

Question 62 of 90

1

Which of the following APs support remote AP operation?

Select one of the following:

A. AP 105
B. AP 125
C. RAP2
D. All of the above

Explanation

Question 63 of 90

1

Referring to the above screen capture, on which switch can you modify APs to enable ARM?

Select one of the following:

A. Controller 10.1.11.100 only
B. Controller 10.1.11.101 and 10.254.1.3 only
C. All three Controllers
D. None

Explanation

Question 64 of 90

1

Which of the following statement is true of the Spectrum Mode?

Select one of the following:

A. No licenses are required to run an AP in Spectrum mode
B. Spectrum mode can only be configured for one AP at a time
C. An AP can be in spectrum mode for both 2.4 and 5G bands at the same time
D. Spectrum Mode is configured under Spectrum Profile

Explanation

Question 65 of 90

1

Which types of encryption will an Aruba access point perform on traffic sent through a Campus AP Virtual AP (VAP) profile in Tunnel forwarding mode?

Select one of the following:

A. TKIP & AES
B. WEP & TKIP
C. WEP & AES
D. WEP, TKIP, & AES
E. None of the above

Explanation

Question 66 of 90

1

When are the system-defined default roles added to the configuration on the controller?

Select one of the following:

A. when the controller is first booted
B. when an RF Proctect license is added to the controller
C. when created manually
D. when a PEF-NG license is added to the controller

Explanation

Question 67 of 90

1

Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose all the correct answers.)

Select one or more of the following:

A. AAA default role for authentication method
B. Server Derivation Rule
C. Vendor Specific Attributes
D. AP Derivation Rule

Explanation

Question 68 of 90

1

What are the Airtime Allocation Policy options for Airtime Performance Protection?

Select one or more of the following:

A. Default Access
B. Priority Access
C. Fair Access
D. Preferred Access
E. Distributed Access

Explanation

Question 69 of 90

1

What is the function of Band Steering?

Select one of the following:

A. Balancing clients across APs on different channels within the same band
B. Encourages clients, 5GHz capable, to connect on the 5GHz spectrum
C. Coordinate access to the same channel across multiple APs
D. Enables selection of 20 vs. 40 MHz mode of operation per band
E. Enables acceptable coverage index on both the “b/g” and “a” spectrums

Explanation

Question 70 of 90

1

Which settings can be modified directly from a local controller? (Choose all correct

Select one or more of the following:

A. Port VLAN setting
B. Switch Time Zone
C. Port trusted
D. Roles
E. SNMP Enable Trap Generation

Explanation

Question 71 of 90

1

Review the following truncated output from an Aruba controller for this item.
(Example) #show rights logon
Derived Role = 'logon'
Up BW:No Limit Down BW:No Limit
L2TP Pool = default-l2tp-pool
PPTP Pool = default-pptp-pool
Periodic reauthentication: Disabled
ACL Number = 1/0
Max Sessions = 65535

Based on the above output from an Aruba controller, an unauthenticated user assigned to
the logon role attempts to start an http session to IP address 172.16.43.170.
What will happen?

Select one of the following:

A. the user's traffic will be passed to the IP address because of the policy statement: user any svc-http dst-nat 8080
B. the user's traffic will be passed to the IP address because of the policy statement: user any svc-https dst-nat 8081
C. the user's traffic will be passed to the IP address because of the policy statement: user any svc-http-proxy1 dst-nat 8088
D. the user will not reach the IP address because of the policy statement: user any svc-http dst-nat 8080
E. the user will not reach the IP address because of the implicit deny any any at the end of the policy.

Explanation

Question 72 of 90

1

Which actions does ARM (Adaptive Radio Management) perform? (Choose all correct answers.)

Select one or more of the following:

A. allows controllers to provision the AP Radio type
B. allows controllers to provision the best channel for APs
C. allows controllers to provision the best power setting for APs
D. attempts to Self Heal in case of an AP failure

Explanation

Question 73 of 90

1

When you create a WLAN SSID in the WLAN/LAN wizard what AP group is it automatically added to?

Select one of the following:

A. The air-monitors group
B. The first configured AP group
C. The Default AP group
D. It is only added to the 'All Profiles' section

Explanation

Question 74 of 90

1

In the diagram provided for this question, the wireless user's laptop is associated with an Aruba AP's Virtual AP profile in tunnel forwarding mode.
When the client transmits, where will the 802.11 headers be removed?

Select one of the following:

A. A
B. B
C. C
D. D

Explanation

Question 75 of 90

1

As a user moves through the authentication process, which of the following is not used in a derivation rule?

Select one of the following:

A. MAC address
B. OS version
C. SSID
D. Radius attribute

Explanation

Question 76 of 90

1

A campus AP has been provisioned with a VAP in bridge forwarding and standard operation modes. Which of the following authentication types are supported?

Select one or more of the following:

A. 802.1X authentication
B. Open System authentication
C. Machine authentication
D. Captive portal authentication

Explanation

Question 77 of 90

1

The Aruba Policy Enforcement Firewall (PEF) module supports destination network address translation (dst-nat).
Which is a common use of this statement in an Aruba configuration?

Select one of the following:

A. source the IP addresses of users to specific IP address
B. redirect HTTP sessions to Captive Portal
C. redirect Access Points to another Aruba controller
D. provide a telnet connection to the controller

Explanation

Question 78 of 90

1

Which netdestination aliases are built into the controller? (Choose all the correct answers.)

Select one or more of the following:

A. mswitch
B. any
C. user
D. guest

Explanation

Question 79 of 90

1

What are the PEF-NG license limits based on?

Select one of the following:

A. Number of APs
B. Limit One per controller
C. Number of users
D. Number of local controllers

Explanation

Question 80 of 90

1

Which statement is true about the Content Security License?

Select one of the following:

A. Applied to the master controller
B. Applied to all the controllers in the network
C. It is based on number of users
D. It is based on number of APs

Explanation

Question 81 of 90

1

Aruba access points are logically connected to controllers using which protocol?

Select one of the following:

A. 802.1q
B. LWAPP
C. PPTP
D. GRE

Explanation

Question 82 of 90

1

The configuration wizard enables which of the following controller clock configurations?

Select one or more of the following:

A. NTP to a time server
B. Manually setting the date time
C. Daylight savings time
D. Only GMT can be configured

Explanation

Question 83 of 90

1

Which of the following controllers has an integrated single radio AP?

Select one of the following:

A. 3200
B. 620
C. 650
D. 651

Explanation

Question 84 of 90

1

Which access point models support concurrent operations in both the “b/g” band as well as the “a” band?
(Choose all the correct answers.)

Select one or more of the following:

A. RAP2
B. AP-120
C. AP-105
D. AP-125
E. AP-135

Explanation

Question 85 of 90

1

By default, how long will an AP scan a single channel when ARM is enabled?

Select one of the following:

A. 80 milliseconds
B. 90 milliseconds
C. 100 milliseconds
D. 110 milliseconds

Explanation

Question 86 of 90

1

Referring to the above screen capture, on which switch can you add an administrative user and assign a switch management role?

Select one of the following:

A. Controller 10.1.11.100 only
B. Controller 10.1.11.101 and 10.254.1.3 only
C. All three Controllers
D. None

Explanation

Question 87 of 90

1

Which of the following metrics does the ARM feature use to calculate the optimal channel and power level for Access Points? (Choose all correct answers)

Select one or more of the following:

A. RF Spectrum Index
B. Priority Index
C. Interference Index
D. Coverage Index

Explanation

Question 88 of 90

1

A customer forgot all passwords for a controller. What method could you use to reset the passwords?

Select one of the following:

A. Telnet to the controller and login to the password recovery account
B. SSH to the controller and login to the password recovery account
C. Connect directly to the serial console and login to the password recovery account
D. Interrupt the boot process at CP-boot and select password recovery
E. Open the controller and press the reset switch

Explanation

Question 89 of 90

1

	Created by Howard Clavijo over 9 years ago

Examen

ACMP- Aruba Certified Mobility Professional

Question 1 of 90

Which command will show all client association history?

Select one of the following:

Explanation

Question 2 of 90

Which Aruba controllers are able to provide IEEE 802.3af POE? (Choose all the correct answers.)

Select one or more of the following:

Explanation

Question 3 of 90

The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication fails and user authentication fails, which role will be assigned?

Select one of the following:

Explanation

Question 4 of 90

Which of the following charts are available for selection in Spectrum Dashboard for AP125?

Select one or more of the following:

Explanation

Question 5 of 90

Select one of the following:

Explanation

Question 6 of 90

Which describe "roles" as used on Aruba Mobility Controllers? (Choose all the correct answers.)

Select one or more of the following:

Explanation

Question 7 of 90

Refer to the above screen capture. By default, which switch's internal database will be used for user authentication?

Select one of the following:

Explanation

Question 8 of 90

What are aliases used for?

Select one of the following:

Explanation

Question 9 of 90

Where are Aruba Vendor Specific Attributes (VSA) programmed?

Select one of the following:

Explanation

Question 10 of 90

An Aruba based network has a Master and three local controllers. No APs terminate on the Master controller. IDS is desired, so the administrator wants to install the "RFProtect license." On which controller should the license be installed?

Select one of the following:

Explanation

Question 11 of 90

In an Aruba based system, the L3 mobility tunnel exists between the home agent and which other element?

Select one of the following:

Explanation

Question 12 of 90

Select one or more of the following:

Explanation

Question 13 of 90

What is the maximum number of campus APs supported by a 620 controller?

Select one of the following:

Explanation

Question 14 of 90

The permanent licenses on the controller will be deleted with the use of which command?

Select one of the following:

Explanation

Question 15 of 90

View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. Radius NY returned a standard radius attribute of filter-Id with a value of employee. What Role will the user get?

Select one of the following:

Explanation

Question 16 of 90

Which of the statements below are TRUE regarding ARM's Spectrum Load Balancing feature? (Choose all correct answers)

Select one or more of the following:

Explanation

Question 17 of 90

Which of the following licenses are consumed by RAP?

Select one of the following:

Explanation

Question 18 of 90

The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat). Which is a common use of this statement in an Aruba configuration?

Select one of the following:

Explanation

Question 19 of 90

When configuring ports in the configuration wizard, which of the following are not options for configuration?

Select one or more of the following:

Explanation

Question 20 of 90

In the above screen capture, the administrator notes that the "Save As" and "Apply" buttons are grayed out and have no action. What is the cause of the problem?

Select one of the following:

Explanation

The screen captures above show the 802.1X authentication profile and AAA profile settings
for a VAP.
If machine authentication fails and user authentication fails, which role will be assigned?

An Aruba based network has a Master and three local controllers. No APs terminate on the Master controller. IDS is desired, so the administrator wants to install the "RFProtect license."
On which controller should the license be installed?

In an Aruba based system, the L3 mobility tunnel exists between the home agent and
which other element?

View the Server group and User Roles screen shots above.
A user associated to an SSID with 802.1x using this server group. Radius NY returned a
standard radius attribute of filter-Id with a value of employee. What Role will the user
get?

The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat).
Which is a common use of this statement in an Aruba configuration?

In the above screen capture, the administrator notes that the "Save As" and "Apply" buttons are grayed out and have no action.
What is the cause of the problem?

View the Server group and User Roles screen shots above.
A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of employee. The user was placed in the guest Role. What statements below are correct?

When configuring a server group containing 3 servers, a customer chooses 'fail through mode'.
What other feature has to be enabled on the controller for this to work?

What new firewall action was added specifically for use with Aruba's Content Security Service?
VisualRF supports import of floor plans from:

A customer has configured a 3000 controller with the following commands:
Vlan 55
Vlan 56
Vlan 57
Interface gigabitethernet 1/0
switchport mode trunk
switchport trunk native vlan 55
switchport trunk allowed vlan 55-57
Which of the following sentences best describes this port?