40 - 60 | Test

Pregunta 1 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed.

Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1.

Server3 currently has no virtual machines.

You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.

Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The Hyper-V Manager console connected to Server3
The Failover Cluster Manager console connected to Server3
The Hyper-V Manager console connected to Server1.
The Failover Cluster Manager console connected to Cluster1
The Hyper-V Manager console connected to Server2

Explicación

Pregunta 2 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1 that runs a Server Core Installation of Windows Server 2012 R2.

File1 has a volume named D that contains home folders. File1 creates a shadow copy of volume D twice a day.

You discover that volume D is almost full.
You add a new volume named H to File1.

You need to ensure that the shadow copies of volume D are stored on volume H.

Which command should you run?

Selecciona una de las siguientes respuestas posibles:

The Set-Volume cmdlet with the -driveletter parameter
The vssadmin.exe create shadow command
The Set-Volume cmdlet with the -path parameter
The vssadmin.exe add shadowstorage command

Explicación

Pregunta 3 de 20

1

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has a single volume that is encrypted by using BitLocker Drive Encryption (BitLocker).

BitLocker is configured to save encryption keys to a Trusted Platform Module (TPM). Server1 is configured to perform a daily system image backup.

The motherboard on Server1 is upgraded.

After the upgrade, Windows Server 2012 R2 on Server1 fails to start.

You need to start the operating system on Server1 as soon as possible.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Start Server1 from the installation media. Run startrec.exe.
Move the disk to a server that has a model of the old motherboard. Start the server from the installation media. Run bcdboot.exe.
Move the disk to a server that has a model of the old motherboard. Start the server. Run tpm.msc.
Start Server1 from the installation media. Perform a system image recovery.

Explicación

Pregunta 4 de 20

1

Your network contains two servers that run Windows Server 2012 R2 named Server1 and Server2. Both servers have the File Server role service installed.

On Server2, you create a share named Backups.

From Windows Server Backup on Server1, you schedule a full backup to run every night. You set the backup destination to \\Server2 \Backups.

After several weeks, you discover that \\Server2\Backups only contains the last backup that completed on Server1.

You need to ensure that multiple backups of Server1 are maintained.

What should you do?

Selecciona una de las siguientes respuestas posibles:

Modify the Volume Shadow Copy Service (VSS) settings.
Modify the properties of the Windows Store Service (WSService) service.
Change the backup destination.
Configure the permission of the Backups share.

Explicación

Pregunta 5 de 20

1

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas of each other.

Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1.

You need to verify whether the replica of VM5 on Server1 is functional. The solution must ensure that VM5 remains accessible to clients.

What should you do from Hyper-V Manager?

Selecciona una de las siguientes respuestas posibles:

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas of each other.

Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1.

You need to verify whether the replica of VM5 on Server1 is functional. The solution must ensure that VM5 remains accessible to clients.

What should you do from Hyper-V Manager?
On Server1, execute a Test Failover.
On Server2, execute a Planned Failover.
On Server2, execute a Test Failover.

Explicación

Pregunta 6 de 20

1

You have a datacenter that contains six servers. Each server has the Hyper-V server role installed and runs Windows Server 2012 R2. The servers are configured as shown in the following table.

image []

Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.

You need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1.

To which server and by which method should you move VM1?

Selecciona una de las siguientes respuestas posibles:

To Host3 by using a storage migration
To Host6 by using a storage migration
To Host2 by using a live migration
To Host1 by using a quick migration

Explicación

Pregunta 7 de 20

1

Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are nodes in a failover cluster named Cluster1.

The network contains two servers named Server3 and Server4 that run Windows Server 2012 R2. Server3 and Server4 are nodes in a failover cluster named Cluster2.

You need to move all of the applications and the services from Cluster1 to Cluster2.

What should you do first from Failover Cluster Manager?

Selecciona una de las siguientes respuestas posibles:

On a server in Cluster2, configure Cluster-Aware Updating.
On a server in Cluster2, click Move Core Cluster Resources, and then click Best Possible Node.
On a server in Cluster1, click Move Core Cluster Resources, and then click Best Possible Node.
On a server in Cluster1, click Migrate Roles.

Explicación

Pregunta 8 de 20

1

You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012 R2.

Server1 has a volume named D that contains user data. Server1 has a volume named E that is empty.

Server1 is configured to create a shadow copy of volume D every hour. You need to configure the shadow copies of volume D to be stored on volume E.

What should you run?

Selecciona una de las siguientes respuestas posibles:

The Set-Volume cmdlet with the -driveletter parameter
The Set-Volume cmdlet with the -path parameter
The vssadmin.exe add shadowstorage command
The vssadmin.exe create shadow command

Explicación

Pregunta 9 de 20

1

You have a server named Server1 that runs Windows Server 2012 R2.

Each day, Server1 is backed up fully to an external disk.

On Server1, the disk that contains the operating system fails.

You replace the failed disk.

You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).

What should you use?

Selecciona una de las siguientes respuestas posibles:

The Wbadmin.exe command
The Repair-bde.exe command
The Get-WBBareMetalRecovery cmdlet
The Start-WBVolumeRecovery cmdlet

Explicación

Pregunta 10 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2.

You create a user account named User1 in the domain. You need to ensure that User1 can use Windows Server Backup to back up Server1.

The solution must minimize the number of administrative rights assigned to User1.

What should you do?

Selecciona una de las siguientes respuestas posibles:

Add User1 to the Backup Operators group.
Add User1 to the Power Users group.
Assign User1 the Backup files and directories user right and the Restore files and directories user right.
Assign User1 the Backup files and directories user right.

Explicación

Pregunta 11 de 20

1

You have a server named Server1 that runs Windows Server 2012 R2.

You start Server1 by using Windows PE.

You need to repair the Boot Configuration Data (BCD) store on Server1.

Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

Bootim
Bootsect
Bootrec
Bootcfg

Explicación

Pregunta 12 de 20

1

Your network contains two servers named Server1 and Server 2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed.

Server1 hosts a virtual machine named VM1. The virtual machine configuration files and the virtual hard disks for VM1 are stored in D: \VM1.

You shut down VM1 on Server1.

You copy D:\VM1 to D:\VM1 on Server2.

You need to start VM1 on Server2. You want to achieve this goal by using the minimum amount of administrative effort.

What should you do?

Selecciona una de las siguientes respuestas posibles:

Run the Import-VMIntialReplication cmdlet.
Create a new virtual machine on Server2 and attach the VHD from VM1 to the new virtual machine.
From Hyper-V Manager, run the Import Virtual Machine wizard.
Run the Import-IscsiVirtualDisk cmdlet.

Explicación

Pregunta 13 de 20

1

You have a server named Server1 that runs Windows Server 2012 R2.
Windows Server 2012 R2 is installed on volume C.

You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts.

Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

The Restart-Server cmdlet
The Bootcfg command
The Restart-Computer cmdlet
The Bcdedit command

Explicación

Pregunta 14 de 20

1

You have a server named Server1 that runs Windows Server 2012 R2.

Server1 fails.

You identify that the master boot record (MBR) is corrupt.

You need to repair the MBR.

Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

Bcdedit
Bcdboot
Bootrec
Fixmbr

Explicación

Pregunta 15 de 20

1

Your network contains three servers named HV1, HV2, and Server1 that run Windows Server 2012 R2. HV1 and HV2 have the Hyper-V server role installed. Server1 is a file server that contains 3 TB of free disk space.

HV1 hosts a virtual machine named VM1. The virtual machine configuration file for VM1 is stored in D:\VM and the virtual hard disk file is stored in E:\VHD.

You plan to replace drive E with a larger volume.

You need to ensure that VM1 remains available from HV1 while drive E is being replaced. You want to achieve this goal by using the minimum amount of administrative effort.

What should you do?

Selecciona una de las siguientes respuestas posibles:

Perform a live migration to HV2.
Add HV1 and HV2 as nodes in a failover cluster. Perform a storage migration to HV2.
Add HV1 and HV2 as nodes in a failover cluster. Perform a live migration to HV2.
Perform a storage migration to Server1.

Explicación

Pregunta 16 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.

DHCP is configured as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP clients. The solution must minimize administrative effort.

What should you do?

Selecciona una de las siguientes respuestas posibles:

Create a superscope and scope-level policies.
Configure the Scope Options.
Create a superscope and a filter.
Configure the Server Options.

Explicación

Pregunta 17 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed.

Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)

You need to assign a user named User1 permission to add and delete records from the contoso.com zone only.

What should you do first?

Selecciona una de las siguientes respuestas posibles:

Enable the Advanced view from DNS Manager.
Add User1 to the DnsUpdateProxy group.
Run the New Delegation Wizard.
Configure the zone to be Active Directory-integrated.

Explicación

Pregunta 18 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.

An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2. The administrator configures IPAM by using Group Policy based provisioning and starts server discovery.

You plan to create Group Policies for IPAM provisioning.

You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.

What should you do on Server2?

Selecciona una de las siguientes respuestas posibles:

From Server Manager, review the IPAM overview.
Run the ipamgc.exe tool.
From Task Scheduler, review the IPAM tasks.
Run the Get-IpamConfiguration cmdlet.

Explicación

Pregunta 19 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.

You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.

Which IPV6 scope prefix should you use?

Selecciona una de las siguientes respuestas posibles:

2001:123:4567:890A::
FE80:123:4567::
FF00:123:4567:890A::
FD00:123:4567::

Explicación

Pregunta 20 de 20

1

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.

The network contains client computers that run either Linux, Windows 7, or Windows 8. You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

You plan to configure Name Protection on all of the DHCP servers.

You need to configure the adatum.com zone to support Name Protection. Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Sign the zone.
Store the zone in Active Directory.
Modify the Security settings of the zone.
Configure Dynamic updates.
Add a DNS key record

	Creado por xfgs df hace más de 10 años

Quiz on 40 - 60, created by fascxa on 07/08/2016.

40 - 60

40 - 60

Pregunta 1 de 20

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 2 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 3 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 6 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 8 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 10 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 11 de 20

You have a server named Server1 that runs Windows Server 2012 R2. You start Server1 by using Windows PE. You need to repair the Boot Configuration Data (BCD) store on Server1. Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 12 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 13 de 20

You have a server named Server1 that runs Windows Server 2012 R2. Windows Server 2012 R2 is installed on volume C. You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts. Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 14 de 20

You have a server named Server1 that runs Windows Server 2012 R2. Server1 fails. You identify that the master boot record (MBR) is corrupt. You need to repair the MBR. Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 15 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 16 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 17 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 18 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 19 de 20

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 20 de 20

Selecciona una o más de las siguientes respuestas posibles:

Explicación

You have a server named Server1 that runs Windows Server 2012 R2.

You start Server1 by using Windows PE.

You need to repair the Boot Configuration Data (BCD) store on Server1.

Which tool should you use?

You have a server named Server1 that runs Windows Server 2012 R2.
Windows Server 2012 R2 is installed on volume C.

You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts.

Which tool should you use?

You have a server named Server1 that runs Windows Server 2012 R2.

Server1 fails.

You identify that the master boot record (MBR) is corrupt.

You need to repair the MBR.

Which tool should you use?