13.1.32 With the RWST credited as the borated water source in Modes 5 and 6, the RWST is required to be operable with a min water level of 24% (15% in Mode 6 with vessel head removed and SIP as injection path), a min boron concentration of 2400 ppm and min solution temp of 40 deg F.
13.2.32.2. Once AFD monitor alarm inoperable: monitor and log AFD to verify AFD is within limits for each OPERABLE excore channel once in the first 30 min and each hour thereafter.
13.2.34. Power Distribution Monitoring System, only applicable when greater than 25% RTP and using PDMS to 1) recalibrate excore NIs, 2) Monitor QPTR, 3) Measure hot channel factors
13.3.31. Seismic instrumentation establishes the requirements of Operability for Seismic Monitoring. 1. Entry into higher operational mode is allowed while the condition of this LCO is not met and required actions have been initiated.
13.4.34. Pressurizer, contains heat up and cooldown rate requirements. Heat up is limited to 100 deg F, Cooldown is limited to 200 deg F in any 1 hour period.
13.6.7. Spray Additive System is a support LCO for TS 3.6.7. It contains surveillance requirements for ensuring the Spray Additive System meets operability requirements with 2 major requirements: 1) Spray additive tank solution level >= 91% and <= 94%, 2) NaOH solution concentration is >= 28% and <= 30% by weight.

	Creado por Lauren Neuburger hace alrededor de 10 años

Taken from LC 25 Class Notes.