Manufacting processes that relate to surface treatments such as polishin, painting, heat treating and joining are...
Manufacturing processes that are used to add or to remove geometric features from the basic form are called...
All of the following are examples of bulk deformation except...
Changing the shape or form of the bulk from materials is caused by compressive or tensile yielding is called...
The process in which molten metal is poured into a cast to solidify is called...
The process of plasticity compressing material between two halves of die set by hydraulic pressue or the stroke of a hammer is called...
The process of solidifing molten metal in a ceramic cast made with wax patterns is called...
Which of the following polymer molding methods is used to produce hollow parts with thin walls?
Charge of thermoset or elastometric is formed between heated mold halves under pressure while polymer cure is called...
Manufacturing very complex shapes including internal and external undercuts is possible using...
Cutting or seporating sheet metal along a straight line is called...
Forming plastic indentations to form ribs, beads, or lettering on surface of metal is called...
Plastic deformation of sheet metal using matched punch and die set is...
Which of the following processes is used to produce products such as soda cans, catridge casings, and pots and pans?
Which of the following processes is used to size sheets for subsequent operations...
Removing material from the workpiece by using a sharp cutting tool that shears away chips of material to create desired form or features is called...
Which of the following is often used as a secondary process to true up critical dimensions or surfaces or to smooth the surface finish?
Removal of material from flat surface by using a rotatng cutting tool is called...
Removing material using a translating cutter as a workpiece fieds is called...
Removing material from a translating workpiece and a stationary cutter is called...
Increasing the diameter of an existing hole with a cutting tool by rotating the workpiece is called
The removal of material from a surface using an abrasive spinning wheel is called...
Which machining process produces a smoother surface?
Handling actions, during assembly, include all of the following except...
Manufacturing costs include all of the following except...
Structural steel shapes result from rolling...
Bar and rod shapes result from rolling...
Processing costs per part is proportional to...
Tooling costs per part is reduced by...
increasing the cycle time
increasing the run quantity
decreasing the material wastes
Manufacturing costs shuold be minimized by reducing...