You have configured your Cisco TelePresence Codec C90 but discover unwated noise during use. What best practice will help avoid this problem.
Connect only one device at a time ot an input and avoid daisy -chaining
Recycle the power on your system after adding each additional input
If you are not using an input, turn it off.
Daisy-chain additional devices using a serial cable to provide separate power supplies
Which two letters represent input connections on the Cisco Telepresence codec c90
You want to reconfigure the H.323 and Sip settings using the remote control on the Cisco TelePresence Codec C90. Which menu allows you to do this?
Audio input levels
What do you need to do before an endpoint can place or receive H.323 calls using a URL address
Register the endpoint to the SIP server
Register the endpoints to the gatekeeper
Register the endpoint to the gatway
Register the endpoint to the Cisco TelePresence MCU
You are installing a high-definition (720p or 1080p) monitor on the Cisco TelePresence Codec C90. Which of the outputs that are represented by letters in the exhibit should you use.
A or B
A or D
A or E
B or C
D or E
While on a call, using the remote control, how do you add an additional participant to a call on your MultiSite-enabled endpoint?
Press the home button to return to the menu, and select the add participant button
Press and hold the End Call key to bring up the dialing menu.
Press and hold the Call key to bring up the dialing menu
Press the Call key, and choose or dail the number of the additional participant
Which three are true statements regarding the Cisco TelePresence endpoint product set? (Choose 3)
The MX200 and MX300 are all-inclusive systems and do not require additional AV components
The MX200 and MX300 are integrator codec systems and require additional AV components
The EX60 and EX90 are room-based TelePresence systems intended for use in board rooms
The C90 is a high end integrator codec
The EX90 is an integrator codec
The C40 is a basic integrator codec supporting dual monitors
What are the two methods for pairing an 8-inch Cisco Telepresence touch panel to a Codec C90? ( Choose two)
Plug the cable that is attached to the Touch panel directly into the back of the Codec C90
Plug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90
Plug the provided Ethernet cable from the Touch panel power supply into the Lan and pair over the network.
Use the built-in wireless on the Touch panel to pair over the network
Which statement is true regarding passwords on a Cisco TelePresence MX, EX, C Series or SX20 device?
The device ships from factory with the admin account enabled, with no password
The device ships from factory with the admin account enabled, with a default password of Cisco.
The device ships from factoractory with admin account enabled, with a default password of tandberg
The devices ships from factory with the root account enabled, with no password
When configuring a Cisco TelePresence EX, MX, or C Series devices, which two statements are true? (Chose two)
The unit can be completely configured from the web interface.
If available, the TRC5 remote control can be used to completely configure the unit
The API must be used in order to configure the unit
The Touch panel can be used to completely configure the unit.
If the user purchases the Cisco TelePresence touch panel, which two statements are true? (Choose Two)
Both the TRC5 remote and the Touch panel can be used simultaneously.
Either the TRC5 remote control or the Touch panel can be used, but not both simultaneously
The Touch panel should be used to make calls, but the TRC5 remote control should be used to configure the unit.
The web interface can be used to configure the unit
If you do not have the Premium Resolution option installed on a Cisco TelePresence endpoint, what is the maximum resolution that you can transmit and receive?
Standard definition resolutions only
When using the Cisco TelePresence Touch panel with a Codec C90, which administrator setting can you access?
all of the same administrator settings as when using the TRC5 remote.
a limited subset of the administrator settings compared with using the TRC5 remote
none of the Administrator settings
only the custom video layout settings
What can you see on the Status > Registrations > by device page?
currently registered SIP and H.323 devices
all devices that were registered for SIP or H.323 since the last reboot
currently registered H.323 devices only
Currently registered SIP devices only
Which two settings can be configured using the serial connection when you are running the TelePresence VCS install wizard? (Choose 2)
device ID number
default video codec
Which feature or features will work on a new Cisco telePresence VCS as soon as the ip configuration is done.
H.323 and SIP
H323, SIP, and interworking
H.323, SIP, Interworking, and firewall traversal
Which of these options shows the methods that are available to configure a Cisco VCS appliance at initial installation
CLI over serial port, web interface keyboard and monitor
CLI over serial port, web interface, LCD panel
CLI over serial port, web interface, boot disk
Using the Cissco Prime Collaboration Manager, after running System Discovery, to discovery the newly added Cisco VCS
The Cisco VCS Starter Pack Express supports which two features that are not found in a Cisco VCS Control? (Choose two)
jabber for Ipad support
local device authentication
In the SIP configuration, which two items need to match in the Cisco TelePresence VCS configuration and the endpoint configuration? ( Choose two)
Cisco VCS IP address
Which two inter-working functions are supported on the Cisco VCS (Choose Two)
Which statement is true when the H.323 and SIP inter working is set to on in the Cisco TelePresence VCS?
The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway regardless of whether one of the end points is locally registered.
The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway only if one of the endpoints is locally registered.
The Cisco TelePresence VCS will not act as a SIP-to-H.323 gateway.
The Cisco TelePresence VCS will permit all traffic from any H.323 or SIP endpoint that is registered locally
Which type of account needs to be set up to create a Csico TelePresence soft client (such as Cisco Jabber or Movi)user if you are using the Cisco TelePresence VCS Expressway Starter Pack?
a local FindMe account on the Cisco VCS
a local admin account on the Cisco VCS
an LDAP user account on Active Directory
an LDAP FindMe account on Active Directory
Which of these must be enabled to set up a Cisco TelePresence soft client (such Cisco Jabber or Movi) on a Cisco TelePresence VCS Expressway Starter Pack?
Which two of these are required for restoring a backup to another Cisco VCS? (Choose Two)
The same version of software of as the original Cisco VCS
the same basic IP address settings
an empty configuration on the Cisco vcs
the same option keys
How are firewall traversal connections established between the Cisco TelePresence VCS expressway and Control?
The traversal client establishes connections outbound to the traversal server
The traversal server establishes connections inbound to the traversal client
Connections are established in both directions from the traversal server to the traversal client
The traversal server nogotiaties acceptable connection prots with the firewall
Which command is used to set the IP configuration for a Cisco TelePresence MCU 5300
Status IP address netmask default GW
xconfigure IP addresss netmask default GW
static A IP address netmask default GW
set IP address netmask default GW DNS server address
If the zone is a VCS firewall traversal solution are established, what else is needed before connections can be established in both directions?
A call policy must be established
VCS serach rules must be created for each zone
The VCS control and the VCS expressway must be neightbored
Transforms must be created in the VCS traversal server zone
What does an endpoint sysrtem user to navigate the Auto Attendant menu on the Cisco TelePresence MCU?
FECC or DTMF navigation
a special remote that came with the Cisco TelePresence MCU
Only FECC; DTMF is not supported
web interafce of the endpoint
If an auto attendant has a numeric id of 543 and the Cisco TelePresence MCU has a prefix of 62 and a domain of cisco.demo, which two of these will be registered on the Cisco TelePresence VCS, assuming that SIP and H.323 registration have been selected? (Choose two)
How can you register a prefix to route all SIP calls beginning with that prefix to the Cisco TelePresence MCU?
You cannot; all SIP addresses must be registered individually
The H.323 prefix is automatically used
You cannot; you need to use a suffix in the form of a domain.
The username is used as the suffix
What does the Cisco Telepresence MCU service prefix do?
Ensures that all H.323 calls beginning with perfix are routed to the Cisco TelePresence MCU
is added to all aliases before registration
diverts calls to the default auto attendant
identifies which serves the Cisco TelePresence MCU will offer in each configured meeting room
How does an administrator move an endpoint efficiently from one conference to another Cisco TelePresence MCU ?
From the Move Participants screen, right-click the participant and select the new conference from the drop-down list
From the Move Participants screen, drag and drop a participant from once conference to another
From the Conference menu, select the participant, and then select the new conference
From the web interace, disconnect the participant, and then reconnect to the new conference.
By which two ways can an endpoint join a conference on the Cisco TelePresence MCU ? (Choose two)
dialing a registered alias for the conference
dialing the auto attendant and navigating to the conference
dialing an endpoint that is already in the conference
dialing all endpoints that are required in the conference
dialing the PIn number of the conference
What effect does the 'Prefix for MCU Registration' have on Cisco TelePresence MCU registration?
The prefix replaces the domain if the prefix is dialed
The prefix is placed in front of all SIP URI's
Anything that is dialed with the perfix will be routed to the Cisco TelePresence MCU
The prefix is placed in front of all E.164 aliases
What is the maximum port capacity of the 5320 MCU?
5HD+ OR 10HD OR 20SD OR 24nhd
1HD+ or 2HD or 4SD or 8nHD
10HD+ or 20HD or 40SD or 48nHD
20HD+ or 40HD or 80SD or 96nHD
How many rack units does a Cisco TelePresence MCU 5300 occupy in a standard data center
Using the web interface, where can you verify the licensing on a Cisco TelePresence MCU 5300?
Settings > Upgrade
Settings > Conference
Settings > Content
Status > Help
How many endpoints can register to the built-in H.323 gatekeeper of a Cisco TelePresence MCU 5300 series device.
none; there is no built-in gatekeeper
How should you configure the IP address and default gateway on a Cisco TelePresence MCU 53000 Series device during setup
Conenct an Ethernet cable to the second Ethernet port of the MCU, and point your web browser to 192.168.2.2
Console into the serial port in the front panel, and use the static command
Use the arrows next to the LCD in the front to change the IP address, subnet mask, and default gateway
change it from the Cisco VCS
How do you upgrade the software of an exisiting installtion with a Cisco TelePresence MCU 5300?
Download the new software, navigate to Maintenance > Upgrade Software, and upload the software
Use FTP to access the MCU, browse to the etc/software/upgrade directory, put the new load in and reboot the MCU
Navigate to Settings > Upgrade, then follow instructions under Main Software Image.
Use an SFTP client to log into the MCU, and place the software in the etc/software/upgrade directory
How to you obtain a SIP log from the Cisco TelePresence MCU 5300 to send to Cisco TAC for futher analysis?
Navigate to Maintenance > Logs, and the download the log
Navigate to Logs > Event Log > SIP Details, and the download the log
Navigate to Logs > H.323/SIP Log, click Enable H.323/SIP Logging, and then download the log.
Use FTP to access the MCU, go to the directory /etc/logs/sip, and get all of the files in the directory.
What is one way that a conference participants screen layout be changed without affecting other participants
Via the participant settings in the MCU 5300 web interface
via the conference settings in the MCU 5300 web interface
by the nominated chair endpoint using FECC
by moving the participant into a different meeting using the MCU 5300 web interface
What are two ways that a conference participant can be disconnected from a conference? (Choose Two)
by using the MCU 5300 web interface
will be automatically disconnected at the end of the allotted time
by the auto attendant
will be disconnected when the conference exceeds its maximum capacity.
Before you upgrade your Cisco TelePresence Management Suite, what should you do with your SQL database?
Save a backup
Restore a previous version
Set a new username and password
Create a second copy
Which installation option should you choose if you wish to use an external SQL database?
If you do not have a valid release key, what restrictions will be applied?
The Cisco TelePresence Management Suite will only manage three systems
Installation will fail and the Cisco TelePresence Management Suite will not be installed
The Cisco TelePresence Management Suite will only operate for 30 days
The SQL database will be purged every 30 days.
Where would you enter release and option keys into the Cisco TelePresence Management Suite
in Configuration>General Settings
On the portal page
through the release key generator in a terminal session on the server
on the Cisco TelePresence Manager Suite server maintenance page
When a new conference is booked on the Cisco TelePresence Management Suite, which setting instructs the endpoint or Cisco TelePresence MCU to call a participant at the time of a conference
By which three ways can systems be added in the Cisco TelePresence Management Suite? (Choose three)
by preregistering systems
from a .csv file
by importing from a Cisco TelePresence VCS
by user-configured name
by dialing an endpoint
by IP address.
from a list of previously discovered systems
You want to obtain specific configuration details from each of the systems that are regisitered to your Cisco TelePresence Management Suite. Where can you do this ?
Choose Navigator from the Systems menu
Choose System Overview from the System menu
Run System tracking from the systems menu
Connect to the Cisco TelePresence Management Suite via a console connection and use show commands
After you create a phone book in the Cisco TelePresence Management Suite, which method should you use to populate it with entries
Connect the phone book to a phone book source
Manually type entries into the phone book.
Connect the phone book to a gatekeeper
Upload a file in .mdf format
The Cisco TCS provides which two functions ? (Choose two)
records and standards-based video conferencing session
records video from IP-based encoders
can stream out live TelePresence sessions over IP networks
allows users to upload video for conversion into H.264 or MP4
Which two statements about the Cisco TCS are correct? ( Choose two)
It contains an internal gatekeeper
it allows creators to edit videos
it runs on the window operating system
it runs on the linux operating systems
What are two ways to set the IP netowrk information on the CIsco TCS? (Choose two)
statically set on its windows operating system
statically set on its linux operating system
automatically assigned by the cisco telepresence managment server
What is the effect of registering the Cisco TCS with the Cisco VCs using H.323 gateway mode?
The Cisco TCS does not support this type of registration.
An unlimited number of recording aliases can be assigned
The cisco tcs is prevent from making an outbound call to a Cisco MCU
The Cisco TCS can reaverse calls between SIP and H.323
Which two statments about Cisco TCS recording aliases are true? ( Choose two)
System recording aliases can only be dialed by the site manager (administrator)
Any recording alias can be triggered by dialing its assigned URI or E.164 number
Recordings resulting from a personal recording alias can only be managed by their creator.
final recordings made from a recording alias cannot be modified
Which of these constitutes a Cisco TCS recording alias?
A recording template, a media server configuration, and a call configuration.
a media server configuration and a call configuration
a recording template and a media server configuration
a recording template and a call configuration
Which two statements about Cisco TCS users are true? (Choose two)
Users with the creator role can create their won recording aliases
Local users have only limited Cisco TCS permissions
Users can be assigned to the Cisco TCS through an Active Directory LDAP server
User permissions are based on one of three assignable roles
Which two statements about Cisco TCS recording templates are true? (Choose Two)
Every recording alias contains one recording template
They provide a way to produce recordings without a recording alias
They must always contain a media server configuration
There can only be one system recording template
Which statement about playing back Cisco TCS recording is true ?
It is not possible to play back Cisco TCS recordings from a video enpoint
The Cisco TCS must register to the Cisco VCS as an H.323 gateway in order to play back recordings on video endpoints
The Cisco TCS will automatically assign an E.164 playback number to recordings if it is registered as an H.323 terminal
The Cisco TCS must register to the Cisco VCS using SIP in order to play back on any video endpoint
In which two locations can Cisco TCS recordings be view? ( Choose two)
directly on the cisco TCS web portal
in the Cisco TelePresence Managements server
on a video endpoint
on the Codec C90 touch panel
Which two pieces of troubleshooting information does the Cisco TCS provide? ( Choose two)
log messages that can be accessed by the site manager through the CLI
recording alias processing progress
error logs that only Cisco TAC can access
log messages that can be accessed by the site manager through the web interface
Which two of these can be found by navigating to TCS Diagnostic > Server Overview in the cisco TCS web interface? ( Choose Two)
option key information
recording port activity status
Cisco VCS registration status
which cisco tms is managing the TCS
Cisco TCS recordings can be encoded into which two video formats? ( Choose two)
MPEG-4 for flash and QuickTime
Sorensen VP8 for flash