2416148
Descrição
Mapa Mental por Sarai HueNñez, atualizado more than 1 year ago
|
Criado por Sarai HueNñez
aproximadamente 9 anos atrás
|
|
Ceramic Processing
- Casting
- Involves using slip. It
can also take various
forms, such as
high-pressure casting or
traditional slip-casting.
- Involves using slip. It
can also take various
forms, such as
high-pressure casting or
traditional slip-casting.
- Coiling
- A simper and traditional
hand-worked method of
making large containers,
using coils of clay would
around to gradually build up
the shape.
- A simper and traditional
hand-worked method of
making large containers,
using coils of clay would
around to gradually build up
the shape.
- Extrusion
- The process is
based around
a plastic clay
mixture being
forced through
a die.
- This is and ideal
process for
products and
components of
the same
cress-sectional
shape.
- Typical extruded
products include
bricks, pipes and
electrical conduits.
- This is and ideal
process for
products and
components of
the same
cress-sectional
shape.
- The process is
based around
a plastic clay
mixture being
forced through
a die.
- Firing
- All ceramic
products need
to be fired or
sintered in order
to be useable.
- The conditions and
firing temperature
required depend on
the material.
- Some pieces need several firings,
beginning whit a biscuit-firing and
ending whit a firing for the glaze.
- The conditions and
firing temperature
required depend on
the material.
- All ceramic
products need
to be fired or
sintered in order
to be useable.
- Acid etching
- The model is created in a
transfer and soaked. Once the
transfer is applied to the tile,
which is immersed in acid, the
area covered is not attacked
by the acid to produce the
sallow bleeding.
- The model is created in a
transfer and soaked. Once the
transfer is applied to the tile,
which is immersed in acid, the
area covered is not attacked
by the acid to produce the
sallow bleeding.
- Drying
- The presence of
excessive
moisture during
firing results in a
damaged final
piece once a
ceramic product
has been made
using a wet
material, it can be
fired.
- The process must be slow as
rapid water evaporation will
cause cracking and uneven
movement, which leads to
warping.
- The process must be slow as
rapid water evaporation will
cause cracking and uneven
movement, which leads to
warping.
- The presence of
excessive
moisture during
firing results in a
damaged final
piece once a
ceramic product
has been made
using a wet
material, it can be
fired.
Anexos de mídia
Quer criar seus próprios Mapas Mentais gratuitos com a GoConqr? Saiba mais.