What is the Primary source for building requirements of a SCIF/SAPF?
ICD/ICS 705
DoDM 5200.08-R
DoDM 5200.01
AA-V-2940
What is the primary source for Physical Security of Sensitive Conventional Arms, Ammunition, and Explosives
DoDM 5220.32
DoDM 5100.76
DoDD 5143.01
ICD/ICS 704
What are assets?
Personnel, Informations, Weapons, Facilities. Activities, and Operations
Officers, Information, Equipment, Facilities, Activities, and Operations
Personnel, Information, Equipment, Facilities, Activities, and Operations
Personnel, Communications, Information, Equipment, Activities and Operations
What is the primary purpose of Physical Security?
Deture and Detect
Prevention and Protection
Keep out and Restrict
Establish the rules and regulations for the barriers implemented
What is a Restricted Area?
A controlled space extending upward and outward from a specified point. This area is typically designated by a commander or director, wherein sensitive information or operations occur and requires limitations of access
An area (land, sea or air) in which there are special restrictive measures employed to prevent or minimize incursions and/or interference, where special security measures are employed to prevent unauthorized entry.
Real DoD properties including bases, stations, forts (including National Guard and Federal Reserve Centers), depots, arsenals, plants (both contractor and Government operated), hospitals, terminals, and other special mission facilities, as well as those used primarily for military purposes.
Facilitating method to implement a course of action. (A capability may or may not be accompanied by an intention).
Bill and Tina are at work discussing what a Controlled Area is. Bill says it is "A controlled space extending upward and outward from a specified point. This area is typically designated by a commander or director; wherein sensitive information or operations occur and requires limitations of access. Tina says "The ability to withstand or repel attack, or other hostile action, to the extent that essential functions can continue or be resumed after onset of hostile action." Who is Correct?
Bill is correct
Tina is correct
Bill and Tina are both right
Bill and Tina are both wrong
What are the 6 main threats?
Bombs, Dogs, Funding, Peaceful Assembly, Viruses, and Killers
Spies, Low fuel, Rain, Restricted information, Barriers, Rivers
Everything
Foreign Intelligence Services, Foreign Military/Paramilitary Forces, Terrorists/saboteurs, Criminals, Protest Groups, and Disaffected Persons
What is Security In-depth?
Placing your facility underground.
Minimum Security requirements for any facility.
A determination by the senior agency official that a facility’s security program consists of layered and complimentary security controls sufficient to deter, detect, and document unauthorized entry and movement within the facility.
A resultant product of the defined process used to conduct a threat analysis and develop an evaluation of a potential threat. Also, it is the product of a threat analysis for a particular unit, installation, or activity.
What mandates policy for a common identification standard for all Federal employees and contractors?
Real ID Act
10 C.F.R. 1046
40 U.S.C. 6133
Homeland Security Presidential Directive-12 (HSPD-12)
What should Bulk Petroleum Product Facilities be classified as?
Controlled Area
Restricted Area
Unsecured Facility
U.S. Military Installation
Bill and Tina are having a disussion about Physical Security Plans. Bill says " All Physical Security Plans should be the same." Tina says " All Physical Security Plans should be Facility Specific." Who is Correct?
Who participates in the Antiterrorism Working Group?
Antiterrorism Officer (ATO), the Installation Commander or designated representative, representatives of the principal staff, including a chemical, biological, radiological, nuclear, and high yield explosive representative, tenant unit representatives, and others as directed by Installation Commanders.
Everyone who wants to attend
Information System Security Officer, Unit Security Managers, Antiterrorism Officer, Installation Commander
No one should attend unless directed by direct supervisor.
Who Participates in the Theat Working Group
Antiterrorism Officer, the Installation Commander or designated representative, members of the staff, tenant unit representatives, law enforcement representatives, and the Intelligence Community (IC).
Antiterrorism Officer, the Installation Commander or designated representative, Unit Security Managers
Antiterrorism Officer, Law enforcement, Intelligence Community
Installation Commander or Facility Director; the Antiterrorism Officer (ATO); Counterintelligence (CI) support personnel
Which of the following statements are true of physical security planning and implementation?
The risk management process must be used to plan which physical security measures should be utilized to protect DoD assets
Use of oversight tools is an important part of physical security implementation.
Facility design must be considered in physical security planning.
Protection of DoD assets must be performed at any cost; therefore, a cost vs. benefit analysis is not necessary.
What are the four main types of lighting?
Continuous, Standby, Emergency, and Movable
Red, Blue, White, and Black
Overlapping, Manual, Automatic, Supplemental
Supplemental, Continuous, Movable and Emergency
Securing man-passible openings is one of the most overlooked physical security protective measures.
Commanders may only implement measures according to the FPCON level in force at the time.
Commanders must comply with and integrate DoD physical security and installation access control policies into their FPCON plans.
What types of locks may be appropriate for safeguarding classified information?
Key-operated high security padlock
Pacific Lock 100G series locks
Combination locks such as electromechanical locks
Any Master lock lock
What is the primary regulation for the security of Information.
DoDI 5200.01
DoDM 5200.08R
DoDD 5200.08R
In order to plan and implement effective physical security measures, you must use the __________________ to determine where and how to allocate your security resources.
Operation Assesment Process
Risk Management Process
Risk Management Framework
Threat Assessment
What does UFC stand for?
Ultimate Fighting Championship
Unified Facilities Criteria
Office Under Facilities Chief
What outlines the Building Requirements for Petroleum Fuel Facilities.
UFC 3-460-01
UFC 4-571-02
UFC 2-359-00
UFC 1-245-00
What regulation outlines DoD minimum antiterrorism standards for buildings?
UFC 4-010-01
UFC 5-101-10
UFC 6-666-66
UFC 1-601-10
What liaisons should a commander establish to protect their fuel facilities?
Liaison with required law enforcement, host-nation officials, and nearest U.S military Installation
Liaison with fuel suppliers and federal level law enforcement
Liaison with potential buyers, local citizens, and sheriffs
Liaison with the Justice Legue and Batman
What size vent must be barred to prevent man passage?
96sq inches
93sq inches
94sq inches
95sq inches
The ______________________ is a comprehensive written plan for appropriate and economical use of personnel and equipment to prevent or minimize criminal and disruptive activities.
Physical Security Plan
Cost Risk Analysis
Monthly Action Plan
Standard Operating Proceedure
Which policy authorizes commanders to issue regulations for the protection or security and places under their command?
DoDI 5200.08
DoDM 5100.08
40 U.S.C. §8103(b)(4)
GSA-approved security containers can be used to store classified information, weapons, and sensitive items.
Who is responsible for developing countermeasures against potential threats to national security and other DoD assets?
OPSEC Officer
Physical Security Officer
Law Enforcement
CI Support
Risk Management Proccess
Operation Assessment Process
Threat Assessment Process
What is UCNI?
Unclassified Controlled Nuclear Information is certain unclassified Government information whose unauthorized dissemination is prohibited under section 148 of the Atomic Energy Act.
Formally Restricted Data
Unclassified Controlled Nuclear Information is certain unclassified Government information whose unauthorized dissemination is prohibited under 10 C.F.R 1047
Controlled Unclassified Information with certain unclassified Government information whose unauthorized dissemination is prohibited under 10 C.F.R 1046
For Secure rooms how far off the ground must windows be?
18ft
12ft
20ft
10ft
Who is the Owns and Manages the DoD Lock Program
GSA owns the program but Naval Facilities Command Manages
GSA Owns and Manages the program
The DoD does not have a lock program and leaves it to the Combatant Commands to manage
Lockmasters owns and KabaMas Manages the program
Areas containing AA&E shall be classified as?
Special Restricted Area
Nothing
Which of the below locks is authorized to secure AA&E
Pacific Lock 100G Series
S&G 951
Any master keyed system
American Lock 5200 Series
How often must an inventory of Key and Locks be conducted?
Annually
Whenever there is a lost key
Semi-annual
Every 18 months
Continues lighting is not required on the exterior of AA&E facilities.
New AA&E facility construction design shall provide a minimum of ______________ resistance to forced entry against an unlimited supply of hand tools or battery-operated tools.
10 min
15 min
5 min
30 min
What is a Clear Zone
An area, both inside and outside a perimeter fence or barrier, designed to provide unobstructed visibility for security personnel.
An area, both inside and outside a perimeter fence or barrier, free of sensors to allow normal pedestrian travel.
An area, both inside and outside a perimeter fence or barrier, designed to allow employees to walk around that facilities.
An area, free of all barriers to act as a funnel point for potential threats.
When processing inventory adjustments, all AA&E loss shall be attributed to an accountability or inventory discrepancy unless determined through investigation that the loss was the result of theft.
What is the primary regulation for the physical protection of information?
DoDM 5200.01 Volume 3
DoDM 5200.01 Volume 1
DoDM 5200.01 Volume 2
DoDM 5200.01 Volume 4
Which of the below does DoDM 5100.76 Physical Security of Sensitive Conventional Arms, Ammunition, and Explosives NOT cover.
Blank ammunition, inert training ammunition, rim-fire ammunition, or non-lethal ammunition
Missiles and rockets
Bulk storage areas (Munitions supply points/ storage areas)
Disposal, Demilitarization, Destruction
Inspections of AA&E storage facilities shall be conducted at intervals not to exceed?
18 months
12 months
6 months
24 months
