Fechar
Management Server?
Time server?
Time Sync Server?
Security Server?
Alias Server?
Name Server?
(Directory Server)
Fabric Controller?
Fabric Login Server?
Broadcast Server?
FC-0 layer?
FC-1layer?
FC2 layer?
FC3 layer?
FC4 layer?
Class of Service
CoS
2
Class of Service
CoS 3?
Class of Service (CoS)
F
FC frame
names of the primary fields?
FC fame
Max size?
Max payload size?
How many bytes in SOF, CRC, EOF?
What are primitives?
What do they do?
nWWN
length?
fields?
pWWN
length?
fields?
display name server
with type and rscn reg?
nameserver cmds
1. local
2. fabric
3. 24 bit addrs in fabric
FCP 24 bit network address structure?
Principal switch does what?
Host login sequence?
Device Login sequence?
Fabric Initialisation Process
when a switch joins a fabric?
what is the number NPIV host
that can log in?
how to display the pwwns of NPIV connected hosts?
what is FEC?
which rel and port speeds?
what are the 4 states of PSM for G_Port fabric connections?
(Port State Machine)
Nx_Port PSM power on sequence?
Nx_Port (PSM) from
portDisable to portEnable?
Condor2 ASIC spec?
BB credit check?
GoldenEye2 spec?
Condor3 spec?
GoldenEye2 AISC use?
Condor2 ASIC use?
Condor3 ASIC use?
Display blades in chassis?
firmware version?
how many VCs on an ISL?
Brocade 300 spec?
Brocade 5100?
Brocade 5300?
Brocade 6505 - Gen 5?
Brocade 6510?
Brocade 6520?
Brocade 7800?
(Access Gateway - AG)
How many port speeds do Brocade optics support?
what is the light frequency for
SW and LW optics?
cables used?
Which components are common
to DCX and DCX 8510?
DCX CP & Core Blades?
DCX 8510 CP & Core Blades
Describe DCX ICL?
Max number of DCX connected
together with ICLs?
Describe Gen 5 ICls
found on 85xx?
Gen 5 over-subscription ratios
Display status of ICL links?
What are the default IP adds for DCX?
How to set CLI timeout?
cmd to change fabric params?
cmd to see date and time?
cmd to set it?
cmd to use NTP server?
set message of the day?
set security banner?
license cmds?
syslogd cmds?
cmds to set fabric and port names?
check fabric params?
configupload cmd options?
cmd to connect to VF
Cmd to display trunks?
Max number of links forming a trunk?
what ensures IOD?
Ports in Trunk must have which parameters the same?
what happens when a
trunk master goes offline?
How is the trunk master determined?
Upon with ports can you set monitoring of a trunk?
what is the tool used to test trunks?
What is the max cable length difference between ISLs which will form a trunk?
Exchange-based routing is also
known as what?
What is this routing is based on ?
What is port based routing base upon?
How long does the route remain in use?
what does DLS do here?
What protocol is used for routing?
Exchange-based routing or DPS handles multiple paths to a destination by doing what?
cmd to display routing table
when does a route cost change?
what does topologyshow give?
What info does pathinfo cmd give?
Which routing method is it most useful for?
trunking related cmds?
If you add a trunking lic to a switch.
what do you need to get trunking working?
Brocade Extended Fabrics is a licensed feature for distances over?
what does it change on the switch?
Other than dark fibre what other connections are supported for long distance?
What two methods are used for flow control over an ISL?
What fill words are used with each one?
How to change the fill word?
How to change from VC_RDY to R_RDY?
default deskew value for shortest ISL?
What are the distance modes Lx and supported disances?
When enabling portcfglongdistance
why it it best to enable
vc_translation_link_init as well?
steps in troubleshooting long links?
Trunking over long distance.
What are the requirements?
When there is 3rd party kit running protection switching which long dist mode should be use and why?
Speed of light in FC?
how log is a fulll size frame at 2Gb, 4, 8, 16?
How many port buffers left?
what are the commands in order to get zoning applied with CLI?
what is the default zone
and how is it used?
How to clear the zoning db entirely?
Zoning:
what is the defined configuration?
Zoning:
What is Effective configuration?
Zoning:
What is Saved configuration?
Enabling Zoning;
what are the steps?
what does cfgsave do?
what happens on a zone merge with default zones set differently?
name the zoning segmentation reasons?
(three)
What are LSAN zones?
How are they identified?
What is a TI zone
Where can you see TI zones?
how are the members defined?
can ports be members of more than one TI zone?
Do you need to include E_ports?
What do QoS zones do?
what are the prefixes used
for high and low?
What are the generally used proportions of bandwidth for high, med & low?
When does the QoS come into play for a given link?
When is medium QoS used?
how are the members defined?
cmd to check zone db size?
do the max sizes vary?
What determines the kind of zoning enforcement used?
What happens to a device when it is in overlapping zones and one zone is frame based and one is session?
cmd to show zone type?
what does cfgenable do?
what does nodefind do?
what does nszonemember do?
cmd to see zoned and unzoned devs.
cmd to backup switch config with
1.no vf
2. vf
3.chassis only
how to restore a vf config?
show ha status?
what firmware is in each partition?
check progress of fw download?
display contents of USB key?
cmd to set password policy?
what does this do?
DLS
Dynamic load sharing recomputes the load sharing when what happens?
What is FA-PWWN?
what do you need to use FA-PWWN?
what does fcping do?
what is a bottleneck?
how to test?
what can cause segmented fabric?
what may cause a missing dev
porterrshow: enc_in?
porterrshow: crc_err
porterrshow: crc_g_eof
porterrshow: too_short
porterrshow: too long
porterrshow: bad_eof
porterrshow: enc_out
what is superPing?
