Este Quiz é cronometrado.
Você tem 1 hora 30 minutos para completar as 66 questões deste quiz..
Which statement describes what is not recommended when setting up a Telepresence room?
Loudspeakers can be placed anywhere in the room
Avoid using hard or polished materials such as glass or marble for walls and furniture.
The telepresence room should have no windows.
The wall colors should be a natural solid color, preferably a Pastel color.
What configuration parameter must be available before setting up the Scopia Desktop Server?
Scopia Desktop SIP ID
Scopia Desktop E.164 ID
Scopia Desktop H.323 ID
Scopia Desktop URI ID
When using the XT Executive 240, in which three ways can you configure and control it? (Choose three.)
Use Scopia Desktop Client
Use the mouse and keyboard
Use the endpoint remote control
Use the endpoint web interface
Reports can be generated based on different devices in the Scopia Management System. For which two devices can reports be generated? (Choose two.)
Endpoints
Meetings
Audio only calls
MCUs
Which two statements regarding Scopia XT Executive 240 are correct? (Choose two.)
The Scopia XT Executive 240 cannot be used as a room system.
The Scopia XT Executive 240 can be upgraded to have an embedded MCU.
The Scopia XT Executive 240 must bepermanentlyconnected to a PC or MAC located in the room.
The Scopia XT Executive 240 allows anyone to connect their PC or MAC.
The Scopia Management software license key is based on, and requires, what information?
Customer product key
Serial number
IP address
MAC Address
A technician is preparing to upgrade a Scopia MCU. When is a new license required?
when the update changes one of the any two digits in a version number
when the update changes the third, fourth and fifth digits in the version number
when the update changes one of the first two digits in a version number
when the update changes one of the first three digits in a version number
A technician would like to upgrade a PathFinder. Where must the upgrade software be located to proceed with the update?
on a TFTP server
in the updates directory
on a PC with Putty emulator software attached to the MCU with a serial cable
on a PC that is attached to the MCU with a serial cable
When upgrading the PathFinder, which two considerations must be taken into account? (Choose two.)
The IP address of the MCU may change.
All Active clients will be disconnected.
The Pathfinder will restart.
A backup of the Pathfinder will be created.
When upgrading the Elite MCU, which two considerations must be taken into account? (Choose two.)
The MCU will restart.
All Active conferences will be disconnected.
A backup of the MCU will be created.
A technician would like to upgrade an elite MCU. Where must the upgrade software be located to proceed with the update?
on a PC that is used to access the MCU web interface
The Scopia Management system can forward alarms to which two of the following? (Choose two.)
an email recipient
a web monitoring system
an SNMP trap server
an FTP server
What button should be pressed to schedule a meeting?
Collaborate
Start Meeting
Schedule
Moderate
Which tool allows a user to invite other participants, change the video layout, or start recording when the meeting is in session?
Participate
Mediate
Which statement is correct regarding the Scopia Elite MCUs?
The Elite MCUs only support High Definition ports
The Elite MCUs can combine High Definition or Standard Definition ports.
The Elite MCUs can combine High Definition, Standard Definition, and Voice only ports in the same conference.
The Elite MCUs can combine High Definition and Voice only ports.
What are the two types of cascading priorities? (Choose two.)
MCU only.
Delay.
Relay.
Local MCU.
A user would like to perform only scheduling and management of conferences in a default installation of Scopia Management. To where would they point their browser?
http://<IP of of Scopia Management>:8080
http://<IP of Scopia Management>
http://<IP of of Scopia Management>:80
http://<IP of of Scopia Management>:8080/iview
Which fields are required to be entered in Scopia Management when adding an LDAP search base to Scopia Management?
Directory Server type and URL/Domain
Directory Server type, URL/Domain, Login, and Password
Directory Server type, Login, and Password
Directory Server type, DNS address, and Login
What is the minimum number of ports that needs to be opened in the firewall to enable connectivity through the PathFinder server?
7
1000
1
3
Is registration to a Gatekeeper or SIP Proxy required when using the Video IVR/Auto Attendant?
Yes, it is required.
The Video IVR/Auto Attendant can be configured only with registration to a SIP Proxy.
The Video IVR/Auto Attendant can be configured only with registration to a Gatekeeper.
No, it is not required.
Which two attributes can be changed when an administrator sets up auto-attendant on Scopia Management? (Choose two.)
Displaying all current meetings on auto-attendant
Displaying all scheduled meetings on auto-attendant
Disconnecting meetings after 30 minutes
Allowing the creation of meetings
In which slot can you insert the Master Blade in the Scopia® Elite 5000 series 3U chassis?
any slot
only the top slot
the bottom slot
any slot except the top slot
The integration of Scopia with IBM Sametime is achieved by which method?
SIP signaling
A set of the IBM proprietary APIs
Sametime connectors
Scopia Call Control
In which two ways can you create a new conference on a MCU without a gatekeeper or SIP Proxy? (Choose two.)
By clicking on the Manage Conferences button in the Elite MCU Administration Page
By calling the E.164 number of the Auto attendant
By clicking on the Configuration tab in the Elite MCU Administration Page
By calling the IP of the Elite MCU
An administrator would like to enable auto-attendant in Scopia Management. What must the administrator do to ensure that auto-attendant works properly?
Disable auto-attendant on the Elite MCU
Restart the Elite MCU
Route auto-attendant to the Elite MCU
Enable auto-attendant on the Elite MCU
For distributed deployments, which three device types are typically found in device islands? (Choose three.)
Gateways
Terminals
Scopia Mobile
When adding a new user to Scopia Management, which fields must be entered?
username, first name, last name, and password
username, last name, and password
username, first name, and last name
username, last name, and email
In a scenario where there is no Scopia Management in the solution, which statement about recording with Scopia Desktop Server is correct?
A recording can be configured from the Scopia Desktop Server.
It is not possible to configure recordings in this scenario.
Recordings can only be scheduled.
A USB flash memory is required to make a recording.
In which two ways can you start a Scopia Desktop recording? (Choose two.)
From Scheduling a meeting
From a Desktop Client
From an Elite MCU
From an XT 5000 endpoint
What is the purpose of creating a new service?
To allow multiple conferences to be created at one time
To create an audio only conference type
To change the Maximum Call Rate of all the conferences
To allow different attributes to be applied to the new service
An organization is expanding and would like to add video conferencing to all the 10 meeting rooms they have. Which is the most cost effective conferencing solution for the organization, if concurrent meetings are required?
a Full Centralized Deployment
a Large Distributed Deployment
a SCOPIA EIite MCU
an XT1000 Internal MCU
What entity performs network-wide setup of devices and locations in Scopia Management with multi-tenant support?
organization administrator
moderator
service provider administrator
meeting operator
What is the default port used by the PathFinder client to register to the Pathfinder server?
3089
443
8443
8080
How do you configure an Audio-only service in the MCU?
By selecting a service type and deselecting the multimedia option
By removing all video codecs from the video codecs table
By selecting a service type and checking the "audio only" checkbox
By selecting all audio codecs from the audio codecs table
Scopia Management includes Gatekeeper software that allows:
small message service registration
voicemail
endpoint registration
SIP registration
Which activity cannot be performed by an MCU operator?
Managing another conference
Disconnecting a conference
MCU configuration
Viewing the conference list
Which two statements regarding the configuration of the gatekeeper on an Elite MCU are correct? (Choose two.)
The port used is typically 8080.
It is configured by navigating to Configuration --> Protocols.
The port used is typically 1719.
It is configured by navigating to Configuration --> Conferences.
When performing the initial configuration of the MCU, what terminal emulation is required?
D. Default Putty emulation
4800 baud rate, 8 Data bits, no parity, 1 stop bit, and flow control none
9600 baud rate, 1 Data bits, 1 parity bit, 1 stop bit, and flow control none
. 9600 baud rate, 8 Data bits, no parity, 1 stop bit, and flow control none
From which two types of LDAP server can users be imported into Scopia Management? (Choose two.)
OpenLDAP Server
LDAP type F Server
Active directory Server
Lotus Domino Server
Which statement regarding the resolution supported by MCU is correct?
Using Continuous Presence Service, the Elite MCU supports both SD and HD endpoints in the same conference.
Using Continuous Presence Service, the Elite MCU supports either HD endpoints only or SD
In Switched Video Service, the Elite MCU supports only HD endpoints in a voice-activated conference.
In Switched Video Service, the Elite MCU supports only SD end-points in a voice-activated conference.
Through which operation can you create new meeting types for Scopia Management?
Set new meeting types on the MCU.
Download new meeting types from one of the configured MCUs.
Manually create a new meeting type through Scopia Management.
Scopia Management has a fixed list of meeting types and they cannot be changed at all.
After using the system for more than a year a company decides to add support for scheduling. Which Scopia® solution component needs to be added?
Another Scopia® Elite MCU
Scopia® Management Suite
PathFinder
Standalone ECS
When logging into a system that was installed with multi-tenant support, what extra field is on the log in screen?
multi-tenant
organization
login
password
A company has a Small Medium Business Deployment. Which Scopia component is required to be able to host multiple conferences at the same time?
Scopia Elite MCU
Scopia Desktop Server
Scopia Desktop server
Scopia Pathfinder
In which way can you connect to a videoconference using Scopia Control?
Use the moderation feature
Use the integrated room calendar to join the specific conference
Connect through your virtual room
Connect through the outlook invitation when tapping on the invitation link
What is a video conferencing endpoint?
physical equipment or software that people use to make video connections
H.323 Video devices
Scopia Elite MCUs that people use to make video connections
Point-to-point video calls
Scopia and Avaya Aura Conferencing have been set up to interoperate. Between which components do the audio and video streams pass?
Scopia Management and System Manager
Avaya Aura Conferencing and the Elite MCU
Scopia Management and Session Manager
. The Audio and video endpoints
Which action can a user take when using Scopia Mobile?
Perform most of the moderating functions of the conference
Share data with other participants
Participate in the conference as audio only
Perform all moderating functions of the conference
Which Scopia product needs to be present for Licenses for Collaboration Suite to be acquired?
A. Scopia Management for Collaboration Suite
B. Scopia Elite 6000 for Collaboration Suite
D. Scopia License Manager
C. Scopia Desktop Server
What can you use to control the Scopia XT Telepresence system?
You can use the XT remote control for all functions.
You can use the XT remote control for basic functions.
You can use both the XT remote control and Scopia Control.
You can only use Scopia Control.
What is one of the limitations of the Scopia Centralized deployment?
A centralized deployment only allows one conference at a time.
A centralized deployment requires all the MCUs to be redundant.
A centralized deployment requires all calls to be directed to the PSTN
A centralized deployment requires all calls to be directed to the MCUs located in one place.
What are two features that Scopia Elite MCUs provide in a video conferencing deployment? (Choose two.)
Continuous Presence
Gatekeeper access
Integration to Avaya Lync
Data Collaboration
Scopia and Avaya Aura Conferencing have been set up to interoperate. What type of signaling is used in the connection between Scopia Management and Session Manager?
ISDN
H.323
SIP
Scopia
Which XT endpoint does not support hosting videoconferences with an Embedded MCU?
XT Executive 240
XT4200
XT5000
XT1200
When using Scopia Control, which three products do you need in your deployment in order to use the calendar integration, corporate directory access, data collaboration and meeting moderation? (Choose three.)
Scopia Management
Scopia Gateway
What are two outcomes once Calibration of the Scopia Telepresence system is completed? (Choose two.)
The configuration of the XT Telepresence system can be viewed but not changed.
Part of the XT Telepresence configuration can be changed when having Administrator rights.
The XT Telepresence system can host videoconferences on its Embedded MCU.
The three Scopia XT endpoints are integrated into a single system.
Which two XT endpoints support Dual-Video resolution of 1080p 60fps? (Choose two.)
XT7000
What are two of the main functions of the Scopia Video Gateway for Lync? (Choose two.)
H.323 Presence to Lync client
Point-to-point and Multipoint calls between Lync clients and H.323 devices
One Click to voicemail
SIP Presence to Lync client
If you are a registered Scopia Mobile user, in which three ways can you connect to a videoconference using Scopia Mobile? (Choose three.)
Enter the meeting ID and tap connect
Tap on the invitation link in the email
Use connect to your virtual room
Use connect to your MCU
Adding an Elite MCU to a Scopia solution that includes Avaya Lync upgrades the experience by providing what attributes? (Choose three.)
Full Moderation Capabilities
Telepresence Interoperability
Aura Integration
Which three types of communication between Scopia components should be separated when trying to diagnose a problem? (Choose three.)
Media
APIs
Signaling
In Scopia Management, which two attributes of user profiles are true? (Choose two.)
The names and short descriptions of the preconfigured profiles can be modified.
You cannot delete preconfigured profiles, but new user profiles can be added.
Settings for the preconfigured profiles cannot be modified.
The names and short descriptions of the preconfigured profiles cannot be modified.
In Scopia Management, what are the three levels of logging that are available? (Choose three.)
Info
Disabled
Warn
Debug
A technician would like to review the pathfinder logs. After dumping the files, what is the next step to retrieve the pathfinder logs?
telnet into the pathfinder server
change the administrator password
enter the pathfinder GUI and go to the event logs tab
use WinSCP to download the files
Which two statements about a gatekeeper are correct? (Choose two.)
The gatekeeper is an H.323 entity.
A gatekeeper enables the auto-attendant feature.
A gatekeeper provides service prefixes to the MCU.
A gatekeeper provides address translation.
Which two statements correctly describe the Scopia Elite MCU for Collaboration Suite? (Choose two.)
It supports a port based licensing model.
It supports recording and streaming.
It supports a user based licensing model.
It is specifically designed for use in the Aura Collaboration Suite.
