Questão 1
Questão
Looking at the following IPv6 adresses: 2001:cdba:0000:0000:0000:0000:3257:9652 2001:cdba:0:0:0:0:3257:9652 2001:cdba::3257:9652
Responda
-
All look similar but refer to different hosts.
-
The addresses are all valid and equivalent
-
the addresses are all invalid
-
only the last address in the list is valid
Questão 2
Questão
Check the items in the list that are considered optional headers used with IPv6
Responda
-
Hop by Hop options header
-
Destination options header
-
Routing Header
-
Fragmented header
-
Authentication header (AH)
-
Encapsulation security payload (ESP) header
Questão 3
Questão
In the command ipv6 address 2001:ffff:2::/64 eui-64
Responda
-
Configures the IPv6 address for the interface and enable IPv6 processing on the interface using an EUI-64 interface ID in the high order 64 bits of the address.
-
Configures the IPv6 address for the interface and enable IPv6 processing on the interface using an EUI-64 interface ID in the low order 64 bits of the address. This basically allows the router to work out the host portion of the address from the interface MAC address
-
Configures the IPv6 address using an EUI-64 interface ID as the high order 64 bits of the address with the remaining bits being calculated using the 4to6 algorithm.
-
Configures the IPv6 address for the interface and converts the 48- bit MAC address to a EUI-64 address.
Questão 4
Questão
What is stateless autoconfiguration of hosts?
Responda
-
IPv6 hosts can be configured automatically when connected to a routed IPv6 network from a DHCP server exactly like with IPv4.
-
IPv6 hosts can be configured automatically when connected to a routed IPv6 network by the addition of a stateless IPv6 address configuration server.
-
IPv6 hosts can be configured automatically when connected to a routed IPv6 network,
-
IPv6 hosts can be configured at the factory for all IPv6 networks.
Questão 5
Questão
The Duplicate Address Detection Algorithm is a Microsoft initiative to prevent users from configuring addresses that are already configured by users on the network. This results in a popup message to the user informing them of their error and the error code. 0x335467.
Questão 6
Questão
The major difference between OSPFv4 and OSPFv6 is that OSPFv6 added a security element.
Questão 7
Questão
In IPv4, packets are limited to 64KB of payload. When used between capable communication partners. IPv6 has support for packets over this limit, referred to as ______________. (not multiple choice)
Responda
-
Limitless Packets
-
Jumbograms
-
MAximgrams
-
Big UNs
Questão 8
Questão
The IPv6 interface is expected in EUI-64, however devices can still use the older 48-bit MAC address format.
Responda
-
Such devices cannot be used with IPv6
-
These can be converted to EUI-64 and then to modified EUI-64 form for calculating an IPv6 interface ID.
-
Such devices can be used with the addition of a 4to6 tunnel translator
-
The difference between 46 bits and 64 bits is just padded out zero's.
Questão 9
Questão
Addresses with the fe80::/12 prefix are:
Responda
-
Site-Local and auto-configured by hosts only if conected to a router
-
Site-Local and auto-configured by hosts despite being connected to a router or not
-
Site-Local and auto-configured by hosts only if connected to a router
Questão 10
Questão
The main feature of a IPv6 is the larger address space: addresses in IPv6 are ____ bits long