Copiar e Editar

ICND2

Descrição

PRUEBA EXAMEN ICND2
Brayan Omar Gonz
Quiz por Brayan Omar Gonz, atualizado more than 1 year ago
Brayan Omar Gonz
Criado por Brayan Omar Gonz aproximadamente 8 anos atrás
34
0
1

Resumo de Recurso

Questão 1

Questão
Which two protocol choices do you have you are implementing an etherChannel bundle? (Choose two).
Responda
  • A_ PAgP
  • B_ PAgD
  • C_ LACP
  • D_ LAPD

Questão 2

Questão
Which two criteria does EIGRP use, by default to calculate its metric? (Chose two).
Responda
  • Bandwidth
  • Reliability
  • Load
  • MTU
  • Delay

Questão 3

Questão
All of these tables are maintained by a link-state routing protocol, except which table?
Responda
  • Routing
  • Topology
  • Update
  • neighbor

Questão 4

Questão
Which OSFP packet helps form neighbor adjacencies?
Responda
  • Exchange packet
  • Hello Packet
  • neighbor discovery packet
  • Adjacency packet

Questão 5

Questão
Which criterion does SFT use to determine the bets path?
Responda
  • Lowest delay
  • highest bandwidth
  • highest total cost of the route
  • total bandwidth of the route

Questão 6

Questão
What is the purpose of LCP?
Responda
  • to perform authentication
  • to negotiate control options
  • to encapsulate multiple protocols
  • to specify asynchronous versus synchronous

Questão 7

Questão
What are two types of VPNs? (Choose two)
Responda
  • Remote-access
  • remote-to-site
  • remote-to-remote
  • Site-to-site

Questão 8

Questão
Which two commands could you use to verify that a GRE tunnel is UP (Choose two)
Responda
  • show ip interface brief
  • show interface tunnel
  • show gre tunnel
  • show tunnel interface

Questão 9

Questão
Witch Cisco router components is used primary to store the startup-config file?
Responda
  • RAM
  • ROM
  • FLASH MEMORY
  • CONFIGURATION REGISTER
  • NVRAM

Questão 10

Questão
Which port marks the lowest-cost path from the non-root bridge to the root bridge?
Responda
  • Root
  • blocking
  • designated
  • no designated

Questão 11

Questão
Which switch provides the spanning-tree designated port role the network segment that services the printers?
Image:
51d2e521-e407-4a3f-97a5-68518005d372 (image/png)
Responda
  • switch 1
  • switch 2
  • switch 3
  • switch 4

Questão 12

Questão
Given the output shown from this Cisco 2950, what is the reason that interface FastEthernet 0/10 is not root port for VLAN 2?
Image:
9aac066a-f797-413d-bd33-336c35b609a3 (image/png)
Responda
  • this switch has more than one interface connected to the root network segment in VLAN 2.
  • this switch is running RSTP while the elected designated switch is running 802 1d Spanning Tree.
  • this switch interface has a higher path cost to the root bridge than another in the topology
  • this switch has a lower bridge ID for VLAN 2 than the elected designated switch.

Questão 13

Questão
Which two these statements regarding RSTP are correct? (choose two)
Responda
  • RSTP cannot operate with PVST
  • RSTP defines new port roles
  • RSTP defines no new port states
  • RSTP is a proprietary implementation of IEEE 802 1D STP
  • RSTP is compatible witch the original IEEE 802 1D STP

Questão 14

Questão
Which port state is introduced by Rapid-PVST?
Responda
  • learning
  • listening
  • discarding
  • forwarding

Questão 15

Questão
Which two states are the port states when RSTP has converged? (choose two)
Responda
  • discarding
  • listening
  • learning
  • forwarding
  • disabled

Questão 16

Questão
disabled16. Al which layer of the OSI model is RSTP used to prevent loops?
Responda
  • physical
  • data link
  • network
  • transport

Questão 17

Questão
What is one benefit of PVST + ?
Responda
  • PVST + supports Layer 3 load balancing without loops.
  • PVST + reduces the CPU cycles for all the switches in the network.
  • PVST + allows the root switch location to be optimized per VLAN.
  • PVST + automatically selects the root bridge location, to provide optimized bandwidth usage.

Questão 18

Questão
18. Which three statements are typical characteristics of VLAN arrangements? (choose three)
Responda
  • A new switch has no VLANs configured.
  • Connectivity between VLANs requires a layer 3 device
  • VLANs typically decrease the number of collision domains
  • Each VLAN uses a separate address space
  • A switch maintains a separate bridging table for each VLAN
  • VLANs Cannot span multiples switches

Questão 19

Questão
Refer to the exhibit. A Technician has configured the Fast Ethernet 0/1 interface on SW11 as an access link in VLAN 1 Based on the output from the show VLAN brief command issued on SW12. What will be the result of making this change on SW11?
Image:
61b461d3-920c-40df-b955-f36aa38712b4 (image/png)
Responda
  • Only the host in VLAN 1 on the two switches will be able to communicate with each other
  • The host in all VLANs on the two switches will be able to communicates witch each other
  • Only the host in VLAN 10 and VLAN 15 on the two switches will be able to communicate with each other.
  • Host will not be able to communicate between the two switches.

Questão 20

Questão
What can be done to secure the virtual terminal interfaces on a router? (choose two)
Responda
  • Administratively shut down the interface
  • Physically secure the interface
  • create an access list and apply it to the virtual terminal with the access-group command
  • configure a virtual terminal password and login process
  • Enter an access test apply it to the virtual terminal interfaces using the access-class command.

Questão 21

Questão
What are three characteristics of the OSPF routing protocol? (choose three)
Responda
  • It converges quickly
  • OSPF is a classfull routing protocol
  • it uses cost to determine the best route
  • it uses the DUAL algorithm to determine the best route
  • OSPF routers send the complete routing table to all directly attached routers
  • OSPF routers discover neighbors before exchanging routing information

Questão 22

Questão
Which statement is true, as relates to class or classless routing?
Responda
  • classfull routing protocol send the subnet mask in routing updates.
  • RIPv1 and OSPF are classless routing protocols
  • automatic summarization at classful boundaries can cause problems on discontinuous subnets.
  • EIGRP and OSPF are classful routing protocols and summarize routes by default

Questão 23

Questão
Which parameter or parameters are used to calculate OSPF cost in Cisco routers?
Responda
  • Bandwidth
  • bandwidth and delay
  • bandwidth, Delay, and MTU
  • bandwidth, MTU, Reliability, Delay, and Load

Questão 24

Questão
Which parameter would you tune to affect the selection of a static route as a backup, when a dynamic protocol is also being used?
Responda
  • hop count
  • administrative distance
  • link bandwidth
  • link delay
  • link cost

Questão 25

Questão
Which two are advantages of static routing when compared to dynamic routing (choose two)
Responda
  • configuration complexity decreases as network size increases.
  • Security increases because only the network administrator may change the routing table.
  • Route summarization is computed automatically by the router.
  • Routing tables adapt automatically to topology changes.
  • an efficient algorithm is used to build routing tables, using automatic updates
  • routing updates are automatically to topology changes.
  • routing traffic load is reduced when used in stub network links

Questão 26

Questão
Which command are required to property configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (choose two)
Responda
  • Router(config)# router ospf 0
  • Router(config)# router ospf 1
  • Router(config)# router ospf area 0
  • Router(config-router)#network 192.168.16.0 0.0.0.255 0
  • Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
  • Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

Questão 27

Questão
Which command enables IPv6 forwarding on a cisco router?
Responda
  • ipv6 local
  • ipv6 host
  • ipv6 unicast-routing
  • ipv6 neighbor

Questão 28

Questão
Which two option are valid WAN connectivity methods? (choose two)
Responda
  • PPP
  • WAP
  • DSL
  • L2TPv3
  • Ethernet

Questão 29

Questão
What are two characteristics of frame relay point-to point sub interfaces? (choose two)
Responda
  • they create split-horizon issues
  • they require a unique subnet within a routing domain
  • they emulate leased lines
  • they are ideal for full-mesh topologies
  • they require the use of NBMA options when using OSPF

Questão 30

Questão
Which two statements about using the CHAP authentication mechanism in a PPP link are true? (choose two)
Responda
  • CHAP uses a two-way handshake
  • CHAP uses a three-way handshake
  • CHAP authentication periodically occurs after link establishment
  • CHAP authentication passwords are sent in plaintext
  • CHAP authentication is performed only upon link establishment
  • CHAP has no protection from playback attacks

Questão 31

Questão
Which command allows you to verify the encapsulation type (CISCO or IETF) for a frame Relay link?
Responda
  • Show frame-relay lmi
  • Show frame-relay map
  • Show frame-relay pvc
  • Show interfaces serial

Quer criar seus próprios Quizzes gratuitos com a GoConqr? Saiba mais.

Semelhante

CCNA R&S v5
socketz
Conteúdo Geral Edital - Auditor Fiscal - Receita Federal
Alessandra S.
Sistema Reprodutor Masculino
Ana Inês Kruecck Quintas
Fontes e princípios do direito do trabalho
Natthan Réryson
AFO 2
Graciela Dias
Organograma
emm.camelo
FIGURAS DE LINGUAGEM
Gabriela Vianna
Sistema Único de Saúde
Vanessa Campos
Certo e Errado - Língua Portuguesa
Sérgio Britto
Estudo de Gramática - Classes de Palavras
Edivaldo Siqueira
Citações de filósofos para sua redação
Maria Fernanda
Explore a Biblioteca