2570833
Description
Quiz by Del Sutton, updated more than 1 year ago
|
Created by Del Sutton
almost 11 years ago
|
|
Question 1
Question
PIM-SM uses a mechanism called ______ to test that the source IP address of a stream received on a port would be accessed in unicast back on the same port.
Answer
-
Reverse Path Forwarding
-
High speed configuration
-
Packet tracing
-
R.B.T
Question 2
Question
An audio stream is being served by Multicast, hosts that correctly connect to the stream are fed it via ________ transport layer protocol.
Answer
-
User Datagram Protocol
-
RTP
-
SIM-DIM
-
Transmission Control Protocol
Question 3
Question
The host uses [igmp] to join a multicast stream, and routers use [pim] to learn about available streams from upstream multicast routers.
Answer
-
Internet Group Management Protocol & Protocol Independent Multicast
-
Internet Group Management Protocol & Personal information manager
-
Internet Group Management Protocol & Product Information Management
Question 4
Question
The [pim-sm] multicast routing protocol is the most suitable protocol for routing multicast over Wide Area Networks (WAN).
Answer
-
Protocol-Independent Multicast Sparse Mode
-
Its a type it in answer, so make sure you know how to spell it!
Question 5
Question
Switches can be aware of multicast streams and behave accordingly if they are configured to use either ________ or _________.
Answer
-
ip-snooping or cgmp
-
Its a type it in job, make sure you know it!
Question 6
Question
Routers that have ports configured for ip pim sparse-dense-mode will randomly select PIM-SM or PIM-DM means of routing multicast.
Answer
- True
- False
Question 7
Question
What is the first [first_ip_addr] and last [last_ip_addr] IP address in the Multicast range of IPv4 addresses ?
Answer
-
224.0.0.0
-
239.255.255.255
-
224.0.0.5
-
224.255.255.255
Question 8
Question
When a router sends an IGMP Query on the LAN to the hosts, it sends it using [ip] address.
Answer
-
224.0.0.1
-
224.255.255.254
-
224.0.0.2
-
223.0.0.254
Question 9
Question
A Rendezvous Point (RV point) is required for which of the following Multicast routing protocols ?
Answer
-
PIM-DIM
-
DVMPR
-
PIM-SM
-
MOSPF
-
Both PIM-DM and PIM-SM
Question 10
Question
Match the milticast addresses to their function.
Answer
-
All Systems on the Subnet : 224.0.0.1
-
All OSPF Routers : 224.0.0.5
-
All PIM Routers : 224.0.0.13
-
All OSPF Designated Routers : 224.0.0.6
-
Al Routers on the subnet : 224.0.0.2
Want to create your own Quizzes for free with GoConqr? Learn more.