Copy and Edit

scopia

Description

lo mejor
miguel vides
Quiz by miguel vides, updated more than 1 year ago
miguel vides
Created by miguel vides almost 8 years ago
511
3
0

Resource summary

Question 1

Question
Which statement describes what is not recommended when setting up a Telepresence room?
Answer
  • Loudspeakers can be placed anywhere in the room
  • Avoid using hard or polished materials such as glass or marble for walls and furniture.
  • The telepresence room should have no windows.
  • The wall colors should be a natural solid color, preferably a Pastel color.

Question 2

Question
What configuration parameter must be available before setting up the Scopia Desktop Server?
Answer
  • Scopia Desktop SIP ID
  • Scopia Desktop E.164 ID
  • Scopia Desktop H.323 ID
  • Scopia Desktop URI ID

Question 3

Question
When using the XT Executive 240, in which three ways can you configure and control it? (Choose three.)
Answer
  • Use Scopia Desktop Client
  • Use the mouse and keyboard
  • Use the endpoint remote control
  • Use the endpoint web interface

Question 4

Question
Reports can be generated based on different devices in the Scopia Management System. For which two devices can reports be generated? (Choose two.)
Answer
  • Endpoints
  • Meetings
  • Audio only calls
  • MCUs

Question 5

Question
Which two statements regarding Scopia XT Executive 240 are correct? (Choose two.)
Answer
  • The Scopia XT Executive 240 cannot be used as a room system.
  • The Scopia XT Executive 240 can be upgraded to have an embedded MCU.
  • The Scopia XT Executive 240 must bepermanentlyconnected to a PC or MAC located in the room.
  • The Scopia XT Executive 240 allows anyone to connect their PC or MAC.

Question 6

Question
The Scopia Management software license key is based on, and requires, what information?
Answer
  • Customer product key
  • Serial number
  • IP address
  • MAC Address

Question 7

Question
A technician is preparing to upgrade a Scopia MCU. When is a new license required?
Answer
  • when the update changes one of the any two digits in a version number
  • when the update changes the third, fourth and fifth digits in the version number
  • when the update changes one of the first two digits in a version number
  • when the update changes one of the first three digits in a version number

Question 8

Question
A technician would like to upgrade a PathFinder. Where must the upgrade software be located to proceed with the update?
Answer
  • on a TFTP server
  • in the updates directory
  • on a PC with Putty emulator software attached to the MCU with a serial cable
  • on a PC that is attached to the MCU with a serial cable

Question 9

Question
When upgrading the PathFinder, which two considerations must be taken into account? (Choose two.)
Answer
  • The IP address of the MCU may change.
  • All Active clients will be disconnected.
  • The Pathfinder will restart.
  • A backup of the Pathfinder will be created.

Question 10

Question
When upgrading the Elite MCU, which two considerations must be taken into account? (Choose two.)
Answer
  • The MCU will restart.
  • All Active conferences will be disconnected.
  • The IP address of the MCU may change.
  • A backup of the MCU will be created.

Question 11

Question
A technician would like to upgrade an elite MCU. Where must the upgrade software be located to proceed with the update?
Answer
  • on a PC that is attached to the MCU with a serial cable
  • on a PC with Putty emulator software attached to the MCU with a serial cable
  • on a PC that is used to access the MCU web interface
  • on a TFTP server

Question 12

Question
The Scopia Management system can forward alarms to which two of the following? (Choose two.)
Answer
  • an email recipient
  • a web monitoring system
  • an SNMP trap server
  • an FTP server

Question 13

Question
What button should be pressed to schedule a meeting?
Answer
  • Collaborate
  • Start Meeting
  • Schedule
  • Moderate

Question 14

Question
Which tool allows a user to invite other participants, change the video layout, or start recording when the meeting is in session?
Answer
  • Participate
  • Mediate
  • Schedule
  • Moderate

Question 15

Question
Which statement is correct regarding the Scopia Elite MCUs?
Answer
  • The Elite MCUs only support High Definition ports
  • The Elite MCUs can combine High Definition or Standard Definition ports.
  • The Elite MCUs can combine High Definition, Standard Definition, and Voice only ports in the same conference.
  • The Elite MCUs can combine High Definition and Voice only ports.

Question 16

Question
What are the two types of cascading priorities? (Choose two.)
Answer
  • MCU only.
  • Delay.
  • Relay.
  • Local MCU.

Question 17

Question
A user would like to perform only scheduling and management of conferences in a default installation of Scopia Management. To where would they point their browser?
Answer
  • http://<IP of of Scopia Management>:8080
  • http://<IP of Scopia Management>
  • http://<IP of of Scopia Management>:80
  • http://<IP of of Scopia Management>:8080/iview

Question 18

Question
Which fields are required to be entered in Scopia Management when adding an LDAP search base to Scopia Management?
Answer
  • Directory Server type and URL/Domain
  • Directory Server type, URL/Domain, Login, and Password
  • Directory Server type, Login, and Password
  • Directory Server type, DNS address, and Login

Question 19

Question
What is the minimum number of ports that needs to be opened in the firewall to enable connectivity through the PathFinder server?
Answer
  • 7
  • 1000
  • 1
  • 3

Question 20

Question
Is registration to a Gatekeeper or SIP Proxy required when using the Video IVR/Auto Attendant?
Answer
  • Yes, it is required.
  • The Video IVR/Auto Attendant can be configured only with registration to a SIP Proxy.
  • The Video IVR/Auto Attendant can be configured only with registration to a Gatekeeper.
  • No, it is not required.

Question 21

Question
Which two attributes can be changed when an administrator sets up auto-attendant on Scopia Management? (Choose two.)
Answer
  • Displaying all current meetings on auto-attendant
  • Displaying all scheduled meetings on auto-attendant
  • Disconnecting meetings after 30 minutes
  • Allowing the creation of meetings

Question 22

Question
In which slot can you insert the Master Blade in the Scopia® Elite 5000 series 3U chassis?
Answer
  • any slot
  • only the top slot
  • the bottom slot
  • any slot except the top slot

Question 23

Question
The integration of Scopia with IBM Sametime is achieved by which method?
Answer
  • SIP signaling
  • A set of the IBM proprietary APIs
  • Sametime connectors
  • Scopia Call Control

Question 24

Question
In which two ways can you create a new conference on a MCU without a gatekeeper or SIP Proxy? (Choose two.)
Answer
  • By clicking on the Manage Conferences button in the Elite MCU Administration Page
  • By calling the E.164 number of the Auto attendant
  • By clicking on the Configuration tab in the Elite MCU Administration Page
  • By calling the IP of the Elite MCU

Question 25

Question
An administrator would like to enable auto-attendant in Scopia Management. What must the administrator do to ensure that auto-attendant works properly?
Answer
  • Disable auto-attendant on the Elite MCU
  • Restart the Elite MCU
  • Route auto-attendant to the Elite MCU
  • Enable auto-attendant on the Elite MCU

Question 26

Question
For distributed deployments, which three device types are typically found in device islands? (Choose three.)
Answer
  • Gateways
  • Terminals
  • MCUs
  • Scopia Mobile

Question 27

Question
When adding a new user to Scopia Management, which fields must be entered?
Answer
  • username, first name, last name, and password
  • username, last name, and password
  • username, first name, and last name
  • username, last name, and email

Question 28

Question
In a scenario where there is no Scopia Management in the solution, which statement about recording with Scopia Desktop Server is correct?
Answer
  • A recording can be configured from the Scopia Desktop Server.
  • It is not possible to configure recordings in this scenario.
  • Recordings can only be scheduled.
  • A USB flash memory is required to make a recording.

Question 29

Question
In which two ways can you start a Scopia Desktop recording? (Choose two.)
Answer
  • From Scheduling a meeting
  • From a Desktop Client
  • From an Elite MCU
  • From an XT 5000 endpoint

Question 30

Question
What is the purpose of creating a new service?
Answer
  • To allow multiple conferences to be created at one time
  • To create an audio only conference type
  • To change the Maximum Call Rate of all the conferences
  • To allow different attributes to be applied to the new service

Question 31

Question
An organization is expanding and would like to add video conferencing to all the 10 meeting rooms they have. Which is the most cost effective conferencing solution for the organization, if concurrent meetings are required?
Answer
  • a Full Centralized Deployment
  • a Large Distributed Deployment
  • a SCOPIA EIite MCU
  • an XT1000 Internal MCU

Question 32

Question
What entity performs network-wide setup of devices and locations in Scopia Management with multi-tenant support?
Answer
  • organization administrator
  • moderator
  • service provider administrator
  • meeting operator

Question 33

Question
What is the default port used by the PathFinder client to register to the Pathfinder server?
Answer
  • 3089
  • 443
  • 8443
  • 8080

Question 34

Question
How do you configure an Audio-only service in the MCU?
Answer
  • By selecting a service type and deselecting the multimedia option
  • By removing all video codecs from the video codecs table
  • By selecting a service type and checking the "audio only" checkbox
  • By selecting all audio codecs from the audio codecs table

Question 35

Question
Scopia Management includes Gatekeeper software that allows:
Answer
  • small message service registration
  • voicemail
  • endpoint registration
  • SIP registration

Question 36

Question
Which activity cannot be performed by an MCU operator?
Answer
  • Managing another conference
  • Disconnecting a conference
  • MCU configuration
  • Viewing the conference list

Question 37

Question
Which two statements regarding the configuration of the gatekeeper on an Elite MCU are correct? (Choose two.)
Answer
  • The port used is typically 8080.
  • It is configured by navigating to Configuration --> Protocols.
  • The port used is typically 1719.
  • It is configured by navigating to Configuration --> Conferences.

Question 38

Question
When performing the initial configuration of the MCU, what terminal emulation is required?
Answer
  • D. Default Putty emulation
  • 4800 baud rate, 8 Data bits, no parity, 1 stop bit, and flow control none
  • 9600 baud rate, 1 Data bits, 1 parity bit, 1 stop bit, and flow control none
  • . 9600 baud rate, 8 Data bits, no parity, 1 stop bit, and flow control none

Question 39

Question
From which two types of LDAP server can users be imported into Scopia Management? (Choose two.)
Answer
  • OpenLDAP Server
  • LDAP type F Server
  • Active directory Server
  • Lotus Domino Server

Question 40

Question
Which statement regarding the resolution supported by MCU is correct?
Answer
  • Using Continuous Presence Service, the Elite MCU supports both SD and HD endpoints in the same conference.
  • Using Continuous Presence Service, the Elite MCU supports either HD endpoints only or SD
  • In Switched Video Service, the Elite MCU supports only HD endpoints in a voice-activated conference.
  • In Switched Video Service, the Elite MCU supports only SD end-points in a voice-activated conference.

Question 41

Question
Through which operation can you create new meeting types for Scopia Management?
Answer
  • Set new meeting types on the MCU.
  • Download new meeting types from one of the configured MCUs.
  • Manually create a new meeting type through Scopia Management.
  • Scopia Management has a fixed list of meeting types and they cannot be changed at all.

Question 42

Question
After using the system for more than a year a company decides to add support for scheduling. Which Scopia® solution component needs to be added?
Answer
  • Another Scopia® Elite MCU
  • Scopia® Management Suite
  • PathFinder
  • Standalone ECS

Question 43

Question
When logging into a system that was installed with multi-tenant support, what extra field is on the log in screen?
Answer
  • multi-tenant
  • organization
  • login
  • password

Question 44

Question
A company has a Small Medium Business Deployment. Which Scopia component is required to be able to host multiple conferences at the same time?
Answer
  • Scopia Elite MCU
  • Scopia Desktop Server
  • Scopia Desktop server
  • Scopia Pathfinder

Question 45

Question
In which way can you connect to a videoconference using Scopia Control?
Answer
  • Use the moderation feature
  • Use the integrated room calendar to join the specific conference
  • Connect through your virtual room
  • Connect through the outlook invitation when tapping on the invitation link

Question 46

Question
What is a video conferencing endpoint?
Answer
  • physical equipment or software that people use to make video connections
  • H.323 Video devices
  • Scopia Elite MCUs that people use to make video connections
  • Point-to-point video calls

Question 47

Question
Scopia and Avaya Aura Conferencing have been set up to interoperate. Between which components do the audio and video streams pass?
Answer
  • Scopia Management and System Manager
  • Avaya Aura Conferencing and the Elite MCU
  • Scopia Management and Session Manager
  • . The Audio and video endpoints

Question 48

Question
Which action can a user take when using Scopia Mobile?
Answer
  • Perform most of the moderating functions of the conference
  • Share data with other participants
  • Participate in the conference as audio only
  • Perform all moderating functions of the conference

Question 49

Question
Which Scopia product needs to be present for Licenses for Collaboration Suite to be acquired?
Answer
  • A. Scopia Management for Collaboration Suite
  • B. Scopia Elite 6000 for Collaboration Suite
  • D. Scopia License Manager
  • C. Scopia Desktop Server

Question 50

Question
What can you use to control the Scopia XT Telepresence system?
Answer
  • You can use the XT remote control for all functions.
  • You can use the XT remote control for basic functions.
  • You can use both the XT remote control and Scopia Control.
  • You can only use Scopia Control.

Question 51

Question
What is one of the limitations of the Scopia Centralized deployment?
Answer
  • A centralized deployment only allows one conference at a time.
  • A centralized deployment requires all the MCUs to be redundant.
  • A centralized deployment requires all calls to be directed to the PSTN
  • A centralized deployment requires all calls to be directed to the MCUs located in one place.

Question 52

Question
What are two features that Scopia Elite MCUs provide in a video conferencing deployment? (Choose two.)
Answer
  • Continuous Presence
  • Gatekeeper access
  • Integration to Avaya Lync
  • Data Collaboration

Question 53

Question
Scopia and Avaya Aura Conferencing have been set up to interoperate. What type of signaling is used in the connection between Scopia Management and Session Manager?
Answer
  • ISDN
  • H.323
  • SIP
  • Scopia

Question 54

Question
Which XT endpoint does not support hosting videoconferences with an Embedded MCU?
Answer
  • XT Executive 240
  • XT4200
  • XT5000
  • XT1200

Question 55

Question
When using Scopia Control, which three products do you need in your deployment in order to use the calendar integration, corporate directory access, data collaboration and meeting moderation? (Choose three.)
Answer
  • Scopia Elite MCU
  • Scopia Management
  • Scopia Desktop Server
  • Scopia Gateway

Question 56

Question
What are two outcomes once Calibration of the Scopia Telepresence system is completed? (Choose two.)
Answer
  • The configuration of the XT Telepresence system can be viewed but not changed.
  • Part of the XT Telepresence configuration can be changed when having Administrator rights.
  • The XT Telepresence system can host videoconferences on its Embedded MCU.
  • The three Scopia XT endpoints are integrated into a single system.

Question 57

Question
Which two XT endpoints support Dual-Video resolution of 1080p 60fps? (Choose two.)
Answer
  • XT1200
  • XT Executive 240
  • XT5000
  • XT4200
  • XT7000

Question 58

Question
What are two of the main functions of the Scopia Video Gateway for Lync? (Choose two.)
Answer
  • H.323 Presence to Lync client
  • Point-to-point and Multipoint calls between Lync clients and H.323 devices
  • One Click to voicemail
  • SIP Presence to Lync client

Question 59

Question
If you are a registered Scopia Mobile user, in which three ways can you connect to a videoconference using Scopia Mobile? (Choose three.)
Answer
  • Enter the meeting ID and tap connect
  • Tap on the invitation link in the email
  • Use connect to your virtual room
  • Use connect to your MCU

Question 60

Question
Adding an Elite MCU to a Scopia solution that includes Avaya Lync upgrades the experience by providing what attributes? (Choose three.)
Answer
  • Continuous Presence
  • Full Moderation Capabilities
  • Telepresence Interoperability
  • Aura Integration

Question 61

Question
Which three types of communication between Scopia components should be separated when trying to diagnose a problem? (Choose three.)
Answer
  • Media
  • APIs
  • Signaling
  • H.323

Question 62

Question
In Scopia Management, which two attributes of user profiles are true? (Choose two.)
Answer
  • The names and short descriptions of the preconfigured profiles can be modified.
  • You cannot delete preconfigured profiles, but new user profiles can be added.
  • Settings for the preconfigured profiles cannot be modified.
  • The names and short descriptions of the preconfigured profiles cannot be modified.

Question 63

Question
In Scopia Management, what are the three levels of logging that are available? (Choose three.)
Answer
  • Info
  • Disabled
  • Warn
  • Debug

Question 64

Question
A technician would like to review the pathfinder logs. After dumping the files, what is the next step to retrieve the pathfinder logs?
Answer
  • telnet into the pathfinder server
  • change the administrator password
  • enter the pathfinder GUI and go to the event logs tab
  • use WinSCP to download the files

Question 65

Question
Which two statements about a gatekeeper are correct? (Choose two.)
Answer
  • The gatekeeper is an H.323 entity.
  • A gatekeeper enables the auto-attendant feature.
  • A gatekeeper provides service prefixes to the MCU.
  • A gatekeeper provides address translation.

Question 66

Question
Which two statements correctly describe the Scopia Elite MCU for Collaboration Suite? (Choose two.)
Answer
  • It supports a port based licensing model.
  • It supports recording and streaming.
  • It supports a user based licensing model.
  • It is specifically designed for use in the Aura Collaboration Suite.
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

Computer Hardware
cscutt
The Elements of Drama
amz.krust
Unit 1 - Electricity
Callum McClintock
Databases
Dean Whittle
GCSE AQA Chemistry Atomic Structure and Bonding
Joseph Tedds
Japanese, basic phrases
vickiwauq
AQA GCSE Chemistry Unit 3 quiz
Gabi Germain
Stave One - A Christmas Carol
hannahshields58
PSBD TEST 2-2
Suleman Shah
Carbohydrates
Julia Romanów
ОБЖ1
хомяк убийца
Browse Library