Quiz
CNNA 1 V4.0 - Chapter 5
Fragen in diesem Quiz (21)
11. In an IPv4 environment, what information is used by the router to forward data packets from one interface of a router to another?
- Adestination network address
- Bsource network address
- Csource MAC address
- Dwell known port destination address
- Adestination network address
22. What information is added during encapsulation at OSI Layer 3?
- Asource and destination MAC
- Bsource and destination application protocol
- Csource and destination port number
- Dsource and destination IP address
- Asource and destination MAC
33. In a connectionless system, which of the following is correct?
- AThe destination is contacted before a packet is sent.
- BThe destination is not contacted before a packet is sent.
- CThe destination sends an acknowledgement to the source that indicates the packet was received.
- DThe destination sends an acknowledgement to the source that requests the next packet to be sent.
- AThe destination is contacted before a packet is sent.
44. Which IP packet field will prevent endless loops?
- Atype-of-service
- Bidentification
- Cflags
- Dtime-to-live
- Eheader checksum
- Atype-of-service
55. Which portion of the network layer address does a router use to forward packets?
- Ahost portion
- Bbroadcast address
- Cnetwork portion
- Dgateway address
- Ahost portion
6Refer to the exhibit. Using the network in the exhibit, what would be the default gateway address for host A in the 192.133.219.0 network?
- A192.135.250.1
- B192.31.7.1
- C192.133.219.0
- D192.133.219.1
- A192.135.250.1
77. If the default gateway is configured incorrectly on the host, what is the impact on communications?
- AThe host is unable to communicate on the local network.
- BThe host can communicate with other hosts on the local network, but is unable to communicate with hosts on remote networks.
- CThe host can communicate with other hosts on remote networks, but is unable to communicate with hosts on the local network.
- DThere is no impact on communications.
- AThe host is unable to communicate on the local network.
88. What is the purpose of a default gateway?
- Aphysically connects a computer to a network
- Bprovides a permanent address to a computer
- Cidentifies the network to which a computer is connected
- Didentifies the logical address of a networked computer and uniquely identifies it to the rest of the network
- Eidentifies the device that allows local network computers to communicate with devices on other networks
- Aphysically connects a computer to a network
99. What type of routing uses information that is manually entered into the routing table?
- Adynamic
- Binterior
- Cstatic
- Dstandard
- Adynamic
1010. When the destination network is not listed in the routing table of a Cisco router, what are two possible actions that the router might take? (Choose two.)
- AThe router sends an ARP request to determine the required next hop address.
- BThe router discards the packet.
- CThe router forwards the packet toward the next hop indicated in the ARP table.
- DThe router forwards the packet to the interface indicated by the source address.
- EThe router forwards the packet out the interface indicated by the default route entry.
- AThe router sends an ARP request to determine the required next hop address.
1111. What are the key factors to consider when grouping hosts into a common network? (Choose three.)
- Agateways
- Bpurpose
- Cphysical addressing
- Dsoftware version
- Egeographic location
- Fownership
1212. What is a component of a routing table entry?
- Athe MAC address of the interface of the router
- Bthe destination Layer 4 port number
- Cthe destination host address
- Dthe next-hop address
- Athe MAC address of the interface of the router
1313. Which intermediary devices could be used to implement security between networks? (Choose two.)
- Arouter
- Bhub
- Cswitch
- Dfirewall
- Eaccess point
- Fbridge
- Arouter
1414. What are three common problems with a large network? (Choose three.)
- Atoo few broadcasts
- Bperformance degradation
- Csecurity issues
- Dlimited management responsibility
- Ehost identification
- Fprotocol compatibility
- Atoo few broadcasts
15Refer to the exhibit. All devices shown in the exhibit have factory default settings. How many broadcast domains are represented in the topology that is shown?
- A3
- B4
- C5
- D7
- E8
- F11
1616. Which three statements are true about routes and their use? (Choose three.)
- AIf no route to the destination network is found, the packet is returned to the previous router.
- BIf the destination network is directly connected, the router forwards the packet to the destination host.
- CIf multiple network entries exist for the destination network, the most general route is used to forward the packet.
- DIf no route exists for the destination network and a default route is present, the packet is forwarded to the next-hop router.
- EIf the originating host has a default gateway configured, the packet for a remote network can be forwarded using that route.
- FIf a host does not have a route manually configured for the destination network, the host will drop the packet.
- AIf no route to the destination network is found, the packet is returned to the previous router.
17Refer to the exhibit. A network administrator is troubleshooting a connectivity problem and needs to determine the address that is used to forward network packets out the network. Using the netstat -r command, the administrator would identify which address as the address to which all hosts send packets that are destined for an outside network?
- A10.10.10.26
- B127.0.0.1
- C10.10.10.6
- D10.10.10.1
- E224.0.0.0
- A10.10.10.26
18Refer to the exhibit. A network administrator notices that there are too many broadcasts on the network. What two steps can the network administrator take to resolve this problem? (Choose two.)
- AReplace S2 with a router.
- BPlace all servers on S1.
- CDisable TCP/IP broadcasts.
- DSubnet the 192.168.0.0 /24 network.
- EDisable all unused interfaces on the switches.
- AReplace S2 with a router.
19Refer to the exhibit. The network in the exhibit is fully operational. What two statements correctly describe the routing for the topology that is shown? (Choose two.)
- A192.168.0.2 is the next-hop address that is used by R3 to route a packet from the 10.0.0.0 network to the 172.16.0.0 network.
- B10.0.0.1 is the next-hop address that is used by R1 to route a packet from the 192.168.12.0 network to the 10.0.0.0 network.
- C192.168.0.1 is the next-hop address that is used by R1 to route a packet from the 192.168.12.0 network to the 172.16.0.0 network.
- D172.16.0.1 is the next-hop address that is used by R3 to route a packet from the 10.0.0.0 to the 172.16.0.0 network.
- E192.168.0.1 is the next-hop address that is used by R2 to route a packet from the 172.16.0.0 network to the 192.168.12.0 network.
- F192.168.0.2 is the next-hop address that is used by R2 to route a packet from the 172.16.0.0 network to the 192.168.12.0 network.
- A192.168.0.2 is the next-hop address that is used by R3 to route a packet from the 10.0.0.0 network to the 172.16.0.0 network.
2020. What two characteristics are commonly associated with dynamic routing protocols? (Choose two.)
- Arequire no device configuration
- Bprovide routers with up-to-date routing tables
- Crequire less processing power than static routes require
- Dconsume bandwidth to exchange route information
- Eprevent manual configuration and maintenance of the routing table
- Arequire no device configuration
2121. What statement describes the purpose of a default route?
- AA host uses a default route to transfer data to another host on the same network segment.
- BA host uses a default route to forward data to the local switch as the next hop to all destinations.
- CA host uses a default route to identify the Layer 2 address of an end device on the local network.
- DA host uses a default route to transfer data to a host outside the local network when no other route to the destination exists.
- AA host uses a default route to transfer data to another host on the same network segment.
Informationen
- Beschreibung
- Quiz am CNNA 1 V4.0 - Chapter 5, erstellt von JJ CD am 29/11/2014.
- Autor
- JJ CD
- Sprache
- Español
- Aufrufe
- 51
- Bewertung
- 4,0 von 5 · 1 Bewertung Bewerte dieses Quiz