Quiz
Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)
Erstelle ein kostenloses Konto, um dieses Quiz zu beenden
Speichere deinen Fortschritt und sieh dir dein Endergebnis an.
oder mit deiner E-Mail registrieren
Schon ein Konto? Anmelden
Fragen in diesem Quiz (69)
1When troubleshooting a system fault, if the Web Interface or SAT are unavailable, which method should be used?
- ASAL
- BTTY2
- CCLI
- DMODEM
2Which two series support RAID 5 configuration for CM6.0? (Choose two)
- AS8730 Server with 8 GB RAM
- BS8800 Server with 12 GB RAM
- CS8510 Server with 8 GB RAM
- DS8300D Server with 8 GB RAM
3Hunt Group Number 99, with Group Extension 4199, is administered for messaging. Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?
- AShoe tracelog huntgroup 4199
- BView logs real time huntgroup 99
- CDisplay real time logs hunt group 99
- DList trace hunt-group 4199
4A customer needs to set up SIP integration on Communication Manager Messaging Application 6.0 What are three pieces of information that are needed to meet this requirement? (Choose three)
- ASignaling group number
- BSIP Domain
- CTransport Method
- DExtension length
- EHunt Group number
5Which three are tests that can be performed to verify a Communication Manager Messaging 6.0 application is working properly? (Choose three)
- AVerify the hunt group status
- BCheck the messaging port status using the display port command
- CCall the messaging Hunt Group
- DCheck the messaging port status using the status port command
- EPerform Message Waiting Indication test
6On a Media Gateway G450, which slots are permitted for the MM 342
- AV1 and V2
- BV6 and V6
- CV3 and V8
- DV5 and V7
7A customer is planning to upgrade from CM 5X to CM 6.0 an existing 8510 server. What is the total minimum memory requirement for this upgrade?
- A4 GB RAM
- B8 GB RAM
- C12 GB RAM
- D16 GB RAM
8Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?
- ACommunication manager Web interface
- BConsole Domain > Server Management > Path management
- CConsole Domain > Server Management > Platform Upgrade
- DConsole Domain > Virtual Machine Management
9Which three statements about CM_Duplex CM 6.0 are true?
- ASoftware duplication is available, but hardware duplication is not available.
- BThe S8510 server is not used for duplication
- CServer duplication is configured via "Failover" option on CDROMs web interface
- DS8730 with DAL 2 card does not support server duplication in CM 6.0.
- EThe CM duplex template supports CMM
10Which gateway command resets the Gateway back to factory default?
- AReset
- BRestart
- CSoftboot
- DNvram init
11A technician wants to test and see if the voice channel between two IP phones. Which command in Site Administration Terminal (SAT) can be used to determine?
- AStatus station <extension>
- BStatus shuffling <extension>
- CList station <extension>
- DTest station <extension>
12Which Ethernet port on S8800 server is for server duplication?
- AETH0
- BETH1
- CETH2
- DETH3
13Which three commands are a part of Avaya Aura CM_survRemote_Embed templates? (Choose three)
- AUtility Services
- BCM 6.0
- CSession Manager
- DCMM 6.0
- EAES 6.0
14A technician is planning to support to upgrade an Avaya communication Manager system to release 6.0 from release 5.2. Which two tasks must be performed during the upgrade procedure? (Choose two)
- AThe S8700-Series Servers must be replaced by S8800 servers.
- BAll G350 gateways must replaced by S8800 servers.
- CThe Survivable Remote servers must be Upgraded to Release 6.0
- DThe survivable Remote servers can stay at Release 5.2
15In the navigation pane, what are the steps to create a test mailbox on the Communication Manager Messaging 6.0 Application?
- ASelect messaging administration, then subscribe management, and then click add or edit.
- BSelect messaging administration, the click new.
- CSelect messaging administration, Select messaging administration, and then click add.
- DSelect Forms control, and then at the command line run then add subscribe command.
16When configuring a G450 Media gateway, which two port settings must be set? (Choose two)
- AFTP Server
- B100 MB port speed
- CAuto-negotiation enabled
- DFull Duplex
17A switch administrator wants to busy out trunk 53 for maintenance and administration work however, there is one call active on port 5 of the trunk. Which command should be extended from the SAT terminal to find out the IP addresses and port of the near-end and far-end node of the auto connection?
- AStatus trunk 53/5
- BList trace port 53/5
- CDisplay trunk 53/5
- DDisplay trunk statistics 53/5
- EStatus port 53/5
18Which three objects can be downloaded from the product license delivery system (PLDS)? (Choose three)
- AAuthentication file
- BPatches
- CFirmware updates
- DPuTTY
- ECommunication manager templates
19Which two statements describe the new procedures that a customer can use to directly and permanently turn ON or OFF licensed features in CM 6.0? (Choose two)
- ACustomers can turn features ON or OFF using the change system parameters customer- options command on the system access terminal (SAT).
- BCustomers can turn features ON or OFF using the system management interface features administration page.
- CCustomers can PDLS directly to turn futures ON or OFF and then download and install a new license file with the updated features.
- DCustomers can turn features ON or OFF using the WebLM server and the system platform management Console
20Which statement describes the action to assure the CM_SurvRemoteEmbeded template was installed correctly?
- AFrom a browser, using the communication manager IP address, successfully log into the communication manager system management.
- BFrom a browser logged into communication Manager, Select administration > server (Maintenance)> server>Process Status. Click on view.
- CFrom a browser logged into the system Management Console verify cm, bsm, and utility_server and application status is running
- DWhen monitoring the template installation workflow status, verify the message. "Wizard completed successfully" displays.
21Which three statements about when communication manager release 6.0 is deployed as a feature server are true? (Choose three)
- AIt supports G450/G430 gateways.
- BIt supports Analog trunks.
- CIt supports SIP telephones.
- DIt supports SIP trunks.
- EIt supports Digital trunks.
22When using the Avaya Site Administrator CEDI interface, which command would be used to check the configuration of telephone set with the extension of 1000?
- APrint station 1000
- BDisplay station 1000
- CShow station 1000
- DView station 1000
23Which three statements are true for a configuration that consists of Duplicated S8800 main servers with a duplicated port network and is a survivable core? (Choose three)
- ASoftware duplication exists between the two main S8800 servers.
- BThe two main servers have duplication IPSls
- CHardware Duplication exists between the two main S8800 servers.
- DThe main servers share a single control network
- EAll Clam media and Medpro cards must be in a one subnet
24A technician has installed pair or duplication S8800 servers with IPSI duplication. Which two procedures indicate that the duplicate IPSIs are both operated? (Choose two)
- AThe enable operation of IPSI Duplication field on the display system-parameter duplication form is set to y.
- BIPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is flashing
- CExecution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the result column.
- DA paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns success for the active IPSI and failure for the standby IPSI.
25What are the recommended CLAN and MEDPRO port settings?
- A10Mbps half duplex
- B1000Mbps full duplex
- C100Mbps full duplex
- D100Mbps half duplex
26Which two statements are true regarding a media gateway full back (recovery) to main (primary) servers? (Choose two)
- AAll active (stable) Ip calls on the media gateway drop when the media gateway falls back from the survivable remote server to the main server.
- BThe list survivable-processor command can be used to confirm that the remote Survivable server is registered to the main server and that the remote survivable server is no longer active.
- CWhen the main server recovers it issues registration requests to all the media gateways in the network.
- DExecuting the status media-gateways command from the main server will show which media gateways are registered with the main server.
27To confirm that a survivable server is currently registered to the main CM servers, using the SAT. Which command should be entered?
- AStatus ess clusters
- BDisplay survivable-processors
- CStatus ess port-networks
- DStatus survivable-processors
28A customer wants to enable audio encryption for Ip phone calls, but the option is not available on any IP- codec-set. Which procedure must be followed to obtain this feature?
- AFrom the SAT, type change system-parameter customer-options. Find the media encryption over IP field, and set the option to Y. Save the change
- BFrom the SMI Feature administration page, find the media Encryption over IP field Set the option to Y. save the changes
- CFrom the system platform WebLM page. Find the media Encryption over IP field set the option to Y. Save the changes.
- DFrom the Aura System Manager's Feature Server Administration page. Find the media encryption over IP field, and set the option to Y. save the changes.
29Which statement describes the action to assure the system platform was installed correctly?
- AFrom the laptop connected to the network, ping the dom0 IP address and verify a successful response.
- BImmediately after the installation, verify the DVD is ejected from the drive and that the server reboots.
- CAfter connecting the server using PuTTY and logging in as root, verify there are no errors when running the xm list command.
- DFrom the system management console browser, verify domain-0 and cdom are running
30Which statement is true about duplex servers in CM 6.0?
- AThe survivable remote Duplex template includes branch session manager
- BCM uses the high availability that system platform can now provide
- CThe license for the survivable server is different than the license file of the main server
- DThe main and all survivable servers require an authentication file
31System platform web console is used to apply the service pack for which three virtual machines? (Choose three)
- ASystem Platform
- BAES 6.0
- CUtility Server
- DCommunication Manager 6.0
- ECMM 6.0
32Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) to CM 6.0?
- AInsert 3rd hard drive, run raid CD, and than run raid CD after rebooting.
- BTake backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after rebooting.
- CInsert the raid CD, reboot the server, and than take backup.
- DInsert the hard drive and the 3rd hard drive is incorporated automatically.
33Which communication manager 6.0 command is used to add a new survivable?
- Aadd surviveable-processor
- Badd survivable-processor ess <node-name>
- Cadd survivable-processor core
- Dadd survivable-processor <node-name>
34Which Ethernet port on S8800 server is connected to the customer network?
- AETH0
- BETH1
- CETH2
- DETH3
35When using the Avaya Site Administration GSDI interface, which command would be use to built a new telephone set with the extension of 1000?
- ANew station 1000
- BAdd station 1000
- CBuild station 1000
- DAdd set 1000
36Which two components are part of the Avaya Aura CM_Simplex template? (Choose two)
- AUtility services
- BCM 6.0
- CSession manager 6.0
- DAvaya Enablement Services (AES)
37When using the Avaya Site Administrator GEDI interface, which command would be used to confirm the media gateway number 3 is registered?
- AShow media-gateway 3
- BDisplay media-gateway 3
- CPrint media-gateway 3
- DView media-gateway 3
38For Avaya Aura CN6.0, how is the license file installed on the server?
- ABy accessing the web interface of CM
- BUsing the load license command through shell prompt of CM
- CThrough the web interface of DOM0
- DUsing the web interface of Console Domain
39Concerning the type of integration with communication manager, on the navigation pane, where is the communication manager messaging 6.0 application mentioned or configured?
- AClick the system wide Messaging parameters, than switch integration type field.
- BClick the switch link administration, and then switch type.
- CClick integration type
- DClick Switch Link Administration, then Switch Link Admin, and then Switch Integration Type field
40A small enterprise customer needs 450 SIP / H.323 users. Which CM 6.0 template will be the most economical solution?
- ACM_Simplex
- BCM_survRemote_Embeded
- CCM_Duplex
- DCM_onlyEmbeded
41For the Duplex S8800 servers running CM 6.0, by default which Ethernet port communication with IPSts?
- AEth0
- BEth1
- CEth2
- DEth3
42When configuring the G450 Media gateway using the Gateway CLI interfaces which command would be used to view the serial number and software status?
- AShow serial number
- BShow system
- CPrint G450
- DShow G450
43Which three elements are needed to CLAN IP interface? (Choose three)
- ANetwork region
- BGateway node name
- CNode name
- DDuplicate node name
- Elink
44Which three procedures are used to determine whether a gateway with a survivable remote server has lost its H.248 link (connection) to the main (Primary) servers? (Choose three)
- AExecute the communication manager command display alarms, to set whether the link loss delay timer has expired.
- BExecute the communication manager command display alarms, to see whether the no service timeout timer (NSTT) has expired.
- CExecute the SAT command list media-gateway from the remote survivable server, to determine whether media gateway is registered to the survivable server.
- DExecute the SAT command list media-gateway to determine which media gateways are not registered to the main server.
- EExecute the command status H.248 link from the remote gateway, to determine whether the link to the main server is active.
45A user at a remote branch location is registered to a G450 media Gateway connected via processor Ethernet (PE) to a main communication manager in the core. They report that they are no longer able to place calls to users at the core. Which three procedures can be used to diagnose the source of problem? (Choose three)
- AConfirm that the registered field on the Communication Manager displays media-gateway to Y.
- BConform that the PE interface is active by executing the communication manager display processor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.
- CUse the show MGC command on the media gateway to confirm the IP address of the PE enabled server at the core is administered as the primary controller of the media gateway.
- DUse the list registered -P -station command on the communication manager to determine whether the user on the media gateway is registered.
- EUse the list survivable processor command to confirm that the survivable server is registered to the main communication manager.
46How is the status of virtual machines (eg.DOM-0, CDOM-0, CM 6.0) on S8800 server checked?
- ABy going to the home page of console domain.
- BBy going to the homepage of Avaya communication manager.
- CBy going to the home page of Dom 0
- DBy using the internet explorer http://Cdom .lpaddr/vm
47Which circuit pack provides an IP Server interface in an Avaya G650 Gateway?
- ATN2312BP
- BTN2342Ac
- CMM711
- DMM714
48A technician is asked to retrieve a maintenance log for CMM that shows the information for 8"00 AM to 5:00 PM local tome that day. Which shell command should be executed to retrieve the maintenance log?
- AShow main log 0800 101010
- BDisplog-1 maint-d 10/10/10 08:00
- CPrint log for maint 101010 08:00
- DPrint-1 maint-d 08:00 10/10/10
49Which MAC address is recommended for the license file?
- AThe MAC address of the Console domain
- BThe MAC address of the CM eth0 port
- CThe MAC address of the CM host name
- DThe MAC address of the DOM0
50A newly installed main Cm 6.0 server indicates it is in license error mode. A technician again 45 minutes later and it is still in error mode. The license was installed from the system management interface (SMI)? Which statement describes the reason for the error mode?
- AThe installer used the wrong interface to install the license and it is therefore not installed.
- BThe server cannot communicate with the IPSI or media gateway whose serial number was used in the license file.
- CThe license audit runs every 60 minutes and the error will be resolved in 15 minutes.
- DThe installer loaded a license for one of the survivable servers, not the main server, and the IPSIs, media Gateways, and/or IP phones have registered to it
51The backup communication Manager, what two choices does the customer have? (Choose two)
- ABackup/restore
- BBackup now
- CSchedule backup
- DBackup/restore later
52A user at extension 1111 complaints that when dialing extension 2222, the call is the call is unexpectedly answered by a person at extension 3333. All other calls made are connected as expected. There is not display on the phone. While at the SAT, the technician has the user repeat the call to extension 2222. Which command identifies the reason this phone call is behaving in the expected way?
- AList trace station 1111
- BList trace station 3333
- CStatus station 1111
- DDisplay station 3333
53Which greeting should be received when you are calling the messaging Hunt group?
- AWelcome to Audix
- BWelcome to messaging
- CYour call is being answered by Audix
- DPlease leave a message after the tone
54What two pieces of information does the product licensing and delivery system (PLDS) required to be entered for a license file to be generated? (Choose two)
- ASerial number
- BLicense activation code
- CMAC address
- DPlatform type
55Which statement describes the action to assure the CM_Simplex Template was installed correctly?
- AFrom browser logged into Systen Management Console, verify cm and utility_Server appear and application state is running.
- BFrom a browser using the communication Manager IP address, successfullylog into the communication manager system management interface (SMI)
- CWhen monitoring the template installation workflow status, verify the message, "Wizard completely successfully" displays.
- DFrom a browser logged into communication manager, select administration > server( maintenance)> server>process status, click on view and verify communicaMgr appears
56A customer has selected Avaya Aura CM_survremote_embedded template. Which Avaya server should be used?
- AS8730 Server 8Gb RAM
- BS8800 Server
- CS8510Server with 8GB RAM
- DS8300D Server
57Which two statements regarding shuffling and hairpining are true? (Choose two)
- AHairpining does not use media processor resources.
- BThe audio connection type field on the communication manager status station formation can be used to determine whether a call is shuffled.
- CA call between a DCP endpoint and H.323 end point can be shuffled.
- DShuffling release media processor resources.
58Which Avaya G450 Module provides 8 DCP ports?
- AMM711
- BMM712
- CMM7202
- DTN2224
59A network failure prevents communication between all the port networks (IPSIs) and there main CM servers. What is the maximum number of port networks (IPSIs) that can be registered to a survivable remote embedded server?
- Ano port network
- B63 port networks
- C64 port networks
- D126 port networks
60Which three servers can be upgraded to communication manager Release 6.0? (Choose three)
- AS8300C
- BS8300D
- CS8510
- DS8800
61A customer has a communication Manager R6.0 system with IP phones and some older TDM phone, and says there is no dial tone for all of the IP phones. All of the hardware has been verified to be working properly. Which two steps can be taken to identify the cause of problem? (Choose two)
- AVerify that the TN2602 Media resources circuit pack has the correct IP settings.
- BVerify that the processor Ethernet mode is enabled in the Server.
- CSet a static IP address on a laptop and see if the server can be pined
- DSet a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged.
62To ensure the communication manager messaging application is working, what are three tests that can be performed? (Choose three)
- ACall one of the two stations that you set as subscriber to the messaging server, and let the call go to coverage
- BLeave message on a covered call and verify that the message waiting indicator (MWI) lamp on the receiving extension is lit.
- CCall the station and after the call is answered leave a message.
- DCall the messaging hunt group from any of the stations to ensure it is answering.
- ELog into communication manager messaging to verify CDOM is running.
63Which statement describes how the communication message application is enabled the first time after the installation?
- AConnect the SAT terminal login using the craft, and then enable using the enable messaging command.
- BOpen the communication manager IP address using web browser. Login as craft, click installation, than communication manager messaging.
- COpen the communication manager IP address using web browser. Login as craft; click Administration, then server (maintenance), than click miscellaneous, than messaging software, and than click enable
- DCommunication manager messaging is enabled by default after the installation.
64Through which protocols can integration of communication manager messaging application 6.0 with communication manager occur? (Choose two)
- AH.323/Q. Sig protocol
- BRTP protocol
- CSSP protocol
- DSIP protocol
65An administrator has just installed a 9620 IP Phones on an existing system. The command change IP network-map is use to administer the phone into to network region 100. All other phones are in network region 1. Like all other 9620 phones on this system, this one successfully gets IP address information fro, the one DHCP server. However, the new phone fails to register with CM. Which two statements describe the cause of the problem? (Choose two)
- ANeither PROCR nor CLANs were administered in network region 100
- BThere are no Medpros or H.248 Media Gateways administered in network region 100
- CNetwork region 100 is not configured to communicate with other network regions
- DOn the IP interface form, some one recently set the field "Allow H.323 registration" to `n'
66Which statement describes how the licensed mailboxes are enabled on a communication manager messaging application 6.0?
- AMailboxes are enabled in the communication manager 6.0 license file.
- BMailboxes are enabled by a separate license that needs to be generated and deployed.
- CMailboxes are enabled by default.
- DMailboxes are enabled in the system Parameter features form.
67On a media gateway G450, into which Slot does the S8300 D server blade need to be inserted?
- AV1
- BV2
- CV4
- DV8
68Which two hardware components support CM_survRemote template? (Choose two)
- AS8730 Servers with 8 GB RAM
- BS8800 Servers
- CS8510 Server with 8 GB RAM
- DS8300D Server
69In which two modes is communication manager release 6.0 deployed? (Chose two)
- AFeature Server
- BSignal Servers
- CEvolution Server
- DSystem Management
Informationen
- Beschreibung
- Quiz am Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete), erstellt von AndreCMartinez am 22/03/2015.
- Autor
- AndreCMartinez
- Sprache
- English
- Aufrufe
- 71
- Bewertung
- 3,3 von 5 · 3 Bewertungen Bewerte dieses Quiz