Karteikarten
NOS Midterm 2 (Part 2)
Karten in diesem Stapel (63)
- 1You use the Problem Steps Recorder when ____. a. you have experienced a one-time-only computer problem b. you have experienced a computer problem that you can reproduce by going through the same steps c. either a or b d. neither a nor bb.
you have experienced a computer problem that you can reproduce by going through the same steps - 2If you type a character, it’s inserted where you type it because ____ mode is the default mode when editing a command line. a. type c. DOS b. insert d. editb.
insert - 3The term “____ event” is most closely associated with Active Directory networks. a. setup c. network b. security d. applicationa.
setup - 4You can open Windows Task Manager by pressing the ____ key combination. a. Ctrl+Shift+Esc c. Ctrl+Del b. Alt+Esc d. Shift+Tab+F1a.
Ctrl+Shift+Esc - 5____ is the Windows 7 component that creates and saves restore points. a. System Protection c. System Restore b. System Configuration d. Task Managera.
System Protection - 6Press the ____ function key to recall the last command. a. Alt+F8 c. F3 b. F7 d. Alt+F2c.
F3 - 7Under DOS, you had to use the ____ command, an external command, if you wanted to recall and edit previously entered commands and use a command history; however, under Windows 7, these features are available as soon as you open a Command Prompt window. a. F7 c. INSERT b. RECALL d. DOSKEYd.
DOSKEY - 8The ____ key combination is called the interrupt command. a. Ctrl+I c. Ctrl+C b. Ctrl+K d. Ctrl+Qc.
Ctrl+C - 9In Windows XP, the ____ folder stored user accounts; however, under Windows 7, that folder no longer exists, and instead, user accounts are found in the ____ folder. Junctions, therefore, redirect programs designed for Windows XP to the corresponding Windows 7 folders. a. System, Members c. Documents and Settings, Users b. System32, Profiles d. Windows, Accountsc.
Documents and Settings, Users - 10The ____ consists of a list of devices that the BIOS examines during booting in order to locate the operating system. a. POST file c. Advanced Options Menu b. firmware table d. boot sequenced.
boot sequence - 11If you use the “Save reliability history” feature of Reliability Monitor, a file is created in ____ format. a. Word c. Excel b. XML d. HTMLb.
XML - 12A hex digit is one of the ____ digits used in the hexadecimal number system. a. 2 c. 18 b. 10 d. 16d.
16 - 13During the Boot Loader phase, the Windows 7 operating system kernel loads along with portions of the ____. a. Clipboard c. Windows Registry b. installed application software d. BIOSc.
Windows Registry - 14The ____ boot component is a database file that contains boot configuration settings and information about the location of boot files. a. MBR c. BCD b. WBM d. Resume Loaderc.
BCD - 15If you want to type over one or more characters, you first press the Insert key to switch to ____ mode, and then start typing. a. type c. overtype b. DOS d. insertc.
overtype - 16The highest reliability rating Reliability Monitor gives is ____. a. 5 c. 20 b. 10 d. Ab.
10 - 17Event Viewer creates logs for all of the following types of events EXCEPT ____. a. Network events c. Security events b. Forwarded events d. Application eventsa.
Network events - 18The ____ boot component starts the process of loading the Windows 7 operating system by examining whether there is another Windows operating system installed on the computer. a. Boot Manager c. WBR b. BCD d. Boot Loaderb.
BCD - 19When booting in Safe Mode, Windows switches the video display to a resolution of ____. a. 320 X 240 c. 600 X 480 b. 800 X 600 d. 1024 X 768b.
800 X 600 - 20When you work in the Windows 7 graphical user interface, you use ____ Explorer to view the folders at any folder level within the hierarchy of your computer system. a. Internet c. 7 b. Microsoft d. Windowsd.
Windows - 21System events can be any of the following EXCEPT ____. a. Error c. Information b. Warning d. Backupd.
Backup - 22____ is a newer type of technology for connecting a hard disk to a computer to achieve faster data transfers. a. SATA c. FATA b. PATA d. ATAa.
SATA - 23When you want to rename a folder displayed in Windows, press ____ to begin the process. a. F3 c. Alt+F7 b. F7 d. F2d.
F2 - 24A ____ is an electronic label assigned to a drive. You can use these to more easily distinguish one drive from another. a. name c. volume label b. drive specification d. letterc.
volume label - 25$P$G, the setting for the PROMPT environment variable, is called a(n) ____ that specifies how the Windows command interpreter (cmd.exe) displays the command prompt. a. argument c. metastring b. switch d. hot fixc.
metastring - 26The ____ is an area of memory that stores commands you previously entered. a. buffer c. command history b. RAM d. hard diskc.
command history - 27If you want to view the directory structure in a command-line environment, you use the ____ command, which is an external command. a. DIR c. DS b. TREE d. MDIRb.
TREE - 28When you close the Command Prompt window, all of the commands stored in (the) ____ are erased. a. operating system c. cmd.exe b. GUI d. command historyd.
command history - 29The following command copies all budget files that contain FY20 as the first four characters in the filename, any character in the fifth and sixth position of the filename, a space in the seventh position of the filename, the word Budget for the eighth through thirteenth characters, and any file extension: a. COPY "FY201? Budget1.xlsx" F: c. COPY "FY20?? Budget.*" F: b. COPY "FY2??? Budget2.xlsx" F: d. COPY "*?0?? Budget.*" F:c.
COPY "FY20?? Budget.*" F: - 30Since the Windows folder contains many different directories and files, you can use the ____ switch with the Directory command to display one screen of output at a time. a. /P c. /T b. /S d. /Oa.
/P - 31Task Manager is useful for ____. a. viewing what applications are loaded b. shutting down nonresponsive programs without affecting other open programs c. shutting down nonresponsive programs without losing valuable documents and data in other windows d. all of the aboved.
all of the above - 32In the Problem Steps Recorder, each ____ initiates a screen capture. a. user comment c. both a and b b. click d. neither a nor bc.
both a and b - 33All of the following are System Recovery Tools found in the Windows Recovery Environment EXCEPT ____. a. Command Prompt c. Hardware Heuristics b. Startup Repair d. Windows Memory Diagnostic Toolc.
Hardware Heuristics - 34A ____ is another name for a batch program or batch file. a. script c. typeset b. format d. link filea.
script - 35The ____ boot option starts Windows normally and creates a special startup file named ntbtlog.txt in the Windows folder. a. Safe Mode with Log c. Enable Boot Logging b. Log All Stages d. Debugging Modec.
Enable Boot Logging - 36When using the TREE command, the ASCII switch ____ converts the vertical and horizontal lines in the directory tree to plus and minus signs. a. /A c. /P/M b. /D d. /D/T/P/Ma.
/A - 37If you experience a serious problem with starting Windows 7, you can use the ____ option on the Advanced Boot Options menu to boot your computer and troubleshoot a problem in a command-line environment. a. Safe Mode c. Safe Mode with Command Prompt b. Safe Mode with Networking d. Safe Mode with Command-linec.
Safe Mode with Command Prompt - 38If you need to edit a file assigned the Read-Only attribute, you must first ____ the Read-Only attribute so that you can make changes to the file, and then save the changes. a. filter c. turn off b. pipe d. turn onc.
turn off - 39In Event Viewer, you find Microsoft Office Alerts by expanding the ____ category in the console tree pane. a. Windows Logs c. Applications and Services Logs b. Subscriptions d. Custom Viewsc.
Applications and Services Logs - 40If you inadvertently mistype a command in the Command Prompt window, you might see the following type of message: ____ a. Unable to proceed with the command entered. Please try again. b. Please retype your command. c. command is not recognized as an internal or external command, operable program or batch file. d. ERROR! Please consult Help for assistance.c.
command is not recognized as an internal or external command, operable program or batch file - 41The text lists the Web site www.sysinfo.org as a good source of information on ____. a. browser helper objects c. comprehensive lists of malicious software b. startup programs d. both a and bd.
both a and b - 42Reliability Monitor identifies critical events by a(n) ____. a. information icon b. red error icon c. blue line d. yellow triangle with black exclamation markb.
red error icon - 43You can reach the System Image Recovery tool by clicking ____ on the Advanced Boot Options menu. a. Repair your computer c. Debugging Mode b. Safe Mode with Command Prompt d. Enable Boot Logginga.
Repair your computer - 44You can use the BIOS Setup utility to do all of the following EXCEPT ____. a. locate important information about your computer b. test network connections c. specify security settings d. adjust POST behavior settingsb.
test network connections - 45The general syntax for the COPY command is as follows: a. COPY source destination c. COPY folder destination b. COPY source folder d. COPY destination sourcea.
COPY source destination - 46After you open a Computer window and then select a drive, you are in the ____ of that drive. a. bottom level c. top-level folder b. command-line window d. basec.
top-level folder - 47The Problem Steps Recorder filename is ____. a. psr.exe c. probstep.exe b. psr.msc d. problemsteps.reca.
psr.exe - 48The Windows Recovery Environment comes installed on ____. a. the Windows DVD b. the hard disk drive of your Windows 7 computer c. both a and b d. neither a nor bc.
both a and b - 49When you enter the COLOR command, you must use ____. a. either uppercase, lowercase, or mixed case b. only lowercase c. only uppercase d. both uppercase and lowercasea.
either uppercase, lowercase, or mixed case - 50All of the following are troubleshooting steps EXCEPT ____. a. Analyze the problem b. Decide how best to proceed in resolving the problem c. Anticipate the problem d. Define the problemc.
Anticipate the problem - 51True or False: To view the commands for which Help is available, you can type the HELP command in the Command Prompt window.True
- 52True or False: Windows 7 keeps more restore points than Windows Vista.False
- 53True or False: You use System Configuration to specify which startup programs and services load during booting and to identify a malicious program that loads at every boot.True
- 54True or False: The System Configuration filename is config.sysFalse
- 55True or False: In BIOS a field refers to the name of a specific type of setting and the setting itself.True
- 56True or False: Windows Task Manager provides information about applications and also information about processes, services, and processor and memory usage.True
- 57True or False: The Problem Steps Recorder records each step you perform but also captures images of the desktop, open program windows, and other open windows.True
- 58True or False: The first step in troubleshooting a problem is to analyze the problemFalse. The first step is to define the problem.
- 59True or False: The Problem Steps Recorder filename is Recorder.exe.False
- 60True or False: When you work in the Windows 7 graphical user interface, you use Windows Explorer to view the folders at any folder level within the hierarchy of your computer system.True
- 61True or False: If booting in Safe Mode with Command Prompt, you do not have access to your network or the Internet.True
- 62True or False: If you are entering a command in the Command Prompt window and also need to include a reference to a path that contains spaces in directory and filenames, you enclose the path within quotation marks.True
- 63True or False: The command-line interface is syntax sensitive. You must type the command exactly as specified, or the command interpreter will display an error message.True
Informationen
- Beschreibung
- Karteikarten am NOS Midterm 2 (Part 2), erstellt von yousweetdreams am 10/11/2013.
- Erstellt von
- yousweetdreams
- Aufrufe
- 1.038
- Bewertung