Karteikarten
Atomic Spectroscopy

Karten in diesem Stapel (43)
- 1MOLECULAR SPEC what energy transition(s) does molecular radiation result fromelectronic transitions
vibrational transitions
rotational transitions - 2ATOMIC SPEC what energy transition(s) does atomic radiation result fromelectronic transitions
- 3molecular spec spectrumbroad peak
- 4atomic spec spectrumsimple line spectra
- 5ATOMIC EMISSION SPECTRA basics overviewspectra of narrow lines of a finite width
lines characteristic of specific elements - 6what could be some causes of interference in atomic emission spectra- molecular emission
- the flame resulting in a broad emission - 7Atomic absorption orbital diagram

- 8atomic emission orbital diagram

- 9flow diagram of the components of an atomic emission spectrometer1. nebulization
2. atomization
3. excitation
4. wavelength selector
5. detector - 10AES - NEBULIZATION overview of nebulizationhigh-velocity stream of gas mixed with a flow of the liquid sample
FUEL SAMPLE AND OXIDANT
sample broken up at the tip into fine droplets (aerosol/mist) - 11ATOMIZATION AND EXCITATION what are the two modes of atomization and excitation in AES1. burner (flame)
2. plasma torch - 12ATOMIZATION AND EXCITATION FLAME PROCESS1. nebulized sample is passed into a flame
2. PRIMARY COMBUSTION ZONE: desolvation takes place
3. INTERZONAL REGION: finely divided solid particles are carried up into the inner cone where all particles are vaporized, EXCITATION ALSO TAKES PLACE IN THIS REGION
4. SECONDARY COMBUSTION ZONE: all material is 'consumed' - 13what is a burner head and what is the significance of ita slit that creates a long path length through the flame
- 14what is a flow spoiler and where is it locatedpositioned at the exit of the nebuliser stream in the spray chamber
- removes large droplets in the aerosol stream - 15ATOMIZATION AND EXCITATION PLASMA TORCH1. aerosol fed in a stream of argon
2. tangential flow of plasma gas (argon)
3. coils deliver a radio-frequency power supply to create the plasma - 16how is an inductively coupled plasma formed? (ICP)1. plasma generated when a LARGE VOLTAGE is applied to a NON-CONDUCTING GAS
2. at sufficient voltage, dielectric (polarizable insulator) gas, breaks down into ions and electrons
3. RESULTS IN further collisions and formation of a plasma
4 ONCE FORMED - plasma is capable of absorbing sufficient power from an external source (RF power) to maintain a temperature sufficient to maintain the plasma (more or less) indefinitely - 17what temperature is sufficient to maintain the plasmaaround 10,000 K
- 18BURNER advantages and disadvantages+ fuel can change flame temp
+ low cost solution
- only a small amount of atoms are excited (unexcited atoms exceed the excited atoms by 10^3-10^10) = POOR SENSITIVITY
- non-atomised molecules interfere
- emissions from flame interfere - 19PLASMA TORCH advantages and disadvantages+ very stable
+ higher temperatures achieved, increases signal
+ no interference from molecules (cant exist in the plasma)
+ no interference from the flame
- more complex
- higher cost - 20whats the origin of the lower detection limit in flame AES compared to ICP AESICP is much more sensitive than flame methods
Ratio between excited state and non excited state in flame = not very high = inefficient
WHEREAS plasma is very efficient
Flame = lots of interfering species (emissions from flame, molecular spec) - 21how are AES systems calibratedcalibration curve made at a controlled temperature - using a set of standard solutions
I=k[C] - 22why cant the BEER LAMBERT LAW be used for AESAES is an EMISSION METHOD
BLL used for ABSORPTION - 23what are the three types of broadenening in atomic absorption spec1. natural broadening
2. pressure broadening
3. doppler broadening - 24NATURAL BROADENING: how are the absolute widths of atomic spectral lines detemined & equation & info on natural broadeningabsolute widths of atomic spectral lines are determined by the lifetime of the excited state and heisenburgs uncertainty principle
Δv=(2πτ)^(-1)
shorter the lifetime = broader the line - 25PRESSURE (COLLISIONAL) BROADENING what is it caused bycollision between atoms and molecules in the gas phase leads to deactivation of excited states = reduced lifetime τ
- 26when is PRESSURE (COLLISIONAL) BROADENING observednumber of collisions increase with the concentration of collision partners = broadening of observed lines - MORE PRONOUNCED AT HIGHER TEMPERATURES AND PRESSURE
-highly dependent on the density of the gaseous medium - 27what is the pressure broadening for na in a normal flame3 x 10^-3 nm
- 28DOPPLER BROADENING what is it caused byrapid motion of atoms as they absorb or emit radiation
- 29DOPPLER BROADENING explain doppler shift- atoms moving towards the detector emit wavelengths that are slightly shorter
- atoms moving away from the detector emit wavelengths that are slightly longer - 30how does temperature affect DOPPLER BROADENINGbroadening of observed lines are more pronounced at higher temperatures due to increased velocity of the atoms
- can limit this effect with cooling - 31whats the range of doppler line widths for Na in a flame4 - 5 x 10^-3 nm
- 32whats the impact on the transmission lone when the width of the absorption line is much less than the width of incident radiationradiation in wings is still transmitted even when the absorption is maxed out when the bandwidth incident radiation exceeds that of the absorption line

- 33whats the impacts on transmission when the width of the absorption line is much greater than the width of incident radiationthe radiation is absorbed evenly across the line width

- 34flow diagram of the components of an atomic absorption spectroscopy1. light source
2. nebulization
3. atomizer
4. absorption by sample
5. wavelength selector
6. detector - 35FLAME ATOMIC ABSORPTION SPECTROMETRY where does emission occur - temperature info - bandwidth infoemission occurs at the hollow cathode lamp
lower temperature and pressure
small bandwidth - 36FLAME ATOMIC ABSORPTION SPECTROMETRY where does absorption occur - temperature info - bandwidth infoabsorption occurs at the burner
higher temperature and pressure
large bandwidth - 37ATOMIC ABSORPTION SPECTROMETRY 1. LIGHT SOURCE INFOone light source for each element
HOLLOW-CATHODE LAMP - line source (opposed to continuum) - 38AAS line source info- sharp, low bandwidth, beam of light
- obtained from an emission from a specific atom - 39AAS whats the role of the cathode in the hollow-cathode lampthe cathode is a specific element that undergoes atomic emission upon excitation to provide a specific line source of light
- 40AAS hollow-cathode lamp HOW MANY LAMPSinstrument has a lamp for each element
~70 lamps available - 41AAS how does a hollow-cathode lamp work?1. quartz tube with a low pressure of a noble gas
2. cathode made of a specific element
3. voltage applied between the anode and cathode
4. electrons create ionized (Ar) gas
5. cathode bombarded by the ions, this excited the source element resulting in an element specific emission
6. transparent quartz window allows emission out
LOW TEMPERATURE AND PRESSURE REDUCES LINE BROADENING - 42AAS 4 absorption by sample MONOCHROMATOR role1. absorption source: atomic emission of the target element (narrow line)
2. absorption occurs across the broad absorption line from λ1 to λ2
3. monochromator needs only to remove unwanted frequencies
LOW RESOLUTION, LOW SPECIFICATION NEEDED - 43whats the role of bandwidth in AAS and how does this impact the use of the beer-lambert lawBEER LAMBERT LAW STRICTLY APPLIES TO MONOCHROMATIC RADIATION
need to integrate response over finite bandwidth
- if molar absorption coefficient is constant over this range, little problem
- if molar absorption coefficient varies, can lead to non-linear A vs. Conc graph
Informationen
- Beschreibung
- BSc ANALYTICAL Karteikarten am Atomic Spectroscopy, erstellt von Casey Champion am 18/01/2023.
- Erstellt von
- Casey Champion
- Aufrufe
- 2
- Bewertung