Karteikarten
03Handout01
Karten in diesem Stapel (29)
- 1is a basic mechanical device for applying a force and doing work. • Robots are made up of ____ that allow them to perform actions.simple machine
- 2• Types of simple machines:o Lever
o Wheel and Axle
o Pulley
o Inclined Plane
o Wedge
o Screw - 3o Lever Parts o Lever Classes Bar or Beam
Fulcrum
Effort
Load
Class 1
Class 2
Class 3: - 4is made up of a straight rigid object which pivots on a turning point to move or lift an object.o Lever
- 5a long plank. It may be wood, metal or any durable material. Bar or Beam
- 6a point on the bar creating a pivot Fulcrum
- 7applied at one point to move/lift an object Effort
- 8object to be moved/lifted Load
- 9The fulcrum is between the effort and the load. (Seesaw) Class 1
- 10The load is between the effort and the fulcrum. (Wheelbarrow) Class 2
- 11The effort is between the load and the fulcrum. (Shovel) Class 3
- 12is used to move objects across distances. It uses a wheel with a rod attached in the middle as an axle to help it to lift or move loads.o Wheel and Axle
- 13uses a wheel with a groove in it and a rope. It is used to move the load or change direction of the force.o Pulley
- 14The axle is fixed in place and cannot be moved. Fixed Pulley
- 15o Pulley Types Fixed Pulley
Movable Pulley:
Compound Pulley - 16The axle is fixed in place and cannot be moved. Fixed Pulley
- 17The load is attached to the pulley and both of them can move from place to place. Movable Pulley
- 18a combination of pulleys designed to make the effort less than half of the weight of the load. (Block and Tackle)Compound Pulley
- 19is a flat surface with one end higher than the other. It allows heavy objects to slide up to a higher point or down to a lower point.inclined plane
- 20consists of two (2) inclined planes, giving it a thin end and thick end to cut, split, or tighten an object. Examples: Knife, axe, nailwedge
- 21is an inclined plane around a cylinder. It can be used to lift things or to hold them together.• screw
- 22screw partso Shaft
o Threads
o Pitch - 23o Shaft – o Threads – o Pitch –o Shaft – cylinder
o Threads – ridges around the shaft
o Pitch – distance between the threads - 24indicates how much a machine can increase or decrease the force on a load, compare with the effort force.• Mechanical advantage
- 25formula for mechanical advantage𝑀𝐴 =𝐹𝑂𝑈𝑇/F𝐼𝑁
Where: MA = Mechanical advantage
FOUT = Force of the object (output force)
FIN = Effort to overcome the force of the object (input force)
If MA is > 1, the output force is greater than the input force.
If MA < 1, it does not have a mechanical advantage and requires more input force. - 26Determine the mechanical advantage if 300N force is required to overcome a load of 700N.Solution:
FOUT = 700N FIN = 300N
MA = FOUT/FIN
= 700N/300N
= 2.33 - 27is the ratio of the work output to work input.• Mechanical efficiency
- 28formula for mechanical efficiency𝑀𝐸 = ( 𝑊𝑂𝑈𝑇/𝐼𝑁) 𝑥 100%
Where: ME = Mechanical efficiency
WOUT = Work output WIN = Work input - 29A construction worker puts 25J of energy in to one strike of his hammer on the head of a nail. The energy transferred to driving the nail in to the wood is 8J. What is the efficiency of the construction worker's hammering?Solution:
WOUT = 8J
WIN = 25J
ME = 𝑊𝑂𝑈𝑇/WIN 𝑥 100%
=8j/25𝐽
= 0.32 𝑥 100%
= 32%
Informationen
- Beschreibung
- normal Robot Dynamics Fundamentalss Karteikarten am 03Handout01, erstellt von Eljin Aguilar am 24/02/2025.
- Erstellt von
- Eljin Aguilar
- Aufrufe
- 1
- Bewertung
Mehr zu Simple and Compound Machines