Gestalte GoConqr mit. Was sollen wir als Nächstes hinzufügen?

Karteikarten

Industrial chapterrrrrs 1-3

Kp Frondosa Englisch 17 Karten

Karten in diesem Stapel (17)

  1. 1factors considered in Installation of Motors and Control Equipment*Power Source
    *Motor Connections
    *Motor Type
    *Controller Type
    *Environment
    *Codes and Standards
  2. 2NEMA meaningNational Electrical Manufacturers Association
  3. 3NEC meaningNational Electrical Code
  4. 4Types of motor Control Systemsmanual, semiautomatic, and automatic
  5. 5IEC meaningInternational Electrotechnical Commission
  6. 6OSHA meaningOccupational Safety and Health Act
  7. 7they test equipment to determine whether it is safe under different conditions.Underwriters
    Laboratories (UL)
  8. 8-generally very simple devices that connect the motor directly to the line -may or may not provide overload protection or low-voltage release -may be accomplished by simply connecting a switch in series with a motorManual controllers
  9. 9is characterized by the use of push buttons, limit switches, pressure switches, and other sensing devices to control the operation of a magnetic contactor or starterSemiautomatic control
  10. 10similar to semiautomatic control,however, an operator does not have to initiate certain actions. Once the control conditions have been set, the system will continue to operate on its ownAutomatic control
  11. 11Functions of Motor Control*Starting
    *Stopping
    *Jogging or Inching
    *Speed Control
    *Motor and Circuit Protection
    *Surge Protection
    *Safety
  12. 12is one of the main purposes of a motor control circuit.Starting
  13. 13is accomplished by connecting the motor directly to the power line.across the-line starting
  14. 14the motor to start at a low speed and accelerate to full speed over some period of time.ramping
  15. 15are methods employed to move a motor with short jabs of power. generally done to move a motor or load into some desired position.Jogging or Inching
  16. 16the current flow through the MOV (metal oxide varistor) is calledleakage current
  17. 17—

Informationen

Beschreibung
IGOD
Erstellt von
Kp Frondosa · Sep 2018
Aktualisiert
20 Sep 2018
Aufrufe
1
Bewertung

Mehr zu Motor drives, starting and speed control

Feedback

Worum geht es?

Was sollen wir als Nächstes hinzufügen?