Karteikarten
Stress, Strain and Young Modulus
Karten in diesem Stapel (36)
- 1Define tensile stressTensile force per unit cross sectional area
- 2What is the equation for tensile stress?Tensile stress = force (N) / cross sectional area (m^2)
- 3What units can we use for tensile stress?Nm^-2 or Pa
- 4Define tensile strainExtension per metre unit original length
- 5What is the equation for tensile strain?Tensile strain = extension / original length
(extension or change in length) - 6What are the units for tensile strain?There aren't any units.
- 7Essentially what is Young Modulus?A measure of stiffness (higher = more force needed to deform)
It's also independent of dimension - 8How do we work out the Young Modulus?Tensile stress / tensile strain
- 9What unit does Young Modulus have?Nm^-2
(Symbol E) - 10The gradient of a stress-strain graph gives what?The Young Modulus
- 11What other graph does a stress-strain graph have the same shape as to?Force-extension
- 12Is a stress-strain graph directly proportional?Yes
- 13What other equation can we use to work out Young Modulus?Force x length / Area x change in length
- 14What is elastic deformation?When a force is applied and a material deforms, if when the force is removed the material goes back to normal, then it's elastic deformation
- 15What is plastic deformation?When a force is applied and a material deforms, if when the force is removed the material doesn't go back to normal, then it's plastic deformation
- 16Give 2 examples of both elastic and plastic deformationElastic: Rubber bands and spring
Plastic: Crumple zones and paper clips - 17What is the limit of proportionality?The point where the material will no longer return to its original place
- 18Stress-strain graph for plastic deformation:
- 19What is an elastic limit?The point up to which the object returns to its original shape when the applied deforming forces are removed
- 20What is yield stress / yield point?Force per unit cross sectional area, at which the material permanently extends considerably, when no extra stress is applied
- 21What is Ultimate Tensile Strength (UTS) ?The maximum stress the material can withstand
- 22What is the fracture point?The point where at material breaks
- 23Stress-strain graph, labelled :
- 24Define brittle and give examplesA material which undergoes little or no plastic deformation (does NOT mean weak)
Examples: Glass, ceramics, cast iron.... - 25Define ductile and give an example:A material which undergoes lots of plastic deformation before fracture.
Example: Copper - 26Graphs for both brittle and ductile materials:
- 27Rubber band force-extension graph:
- 28How would we find the useful energy?Area under unloading curve
- 29How would we find the wasted heat energy?Area between curves
- 30Permanent deformation graph:

- 31How would we find energy lost as heat (work) ?Area between lines
- 32How would we find the length of determinant deformation?The distance from the origin to the 2nd line (along x-axis)
- 33What is special about the 2 lines?They are parallel (have same gradients)
- 34How does a crumple zone work?Transfer Ek of car into heat energy.
Also extends time taken to decelerate which decreases force required, and therefore damage done to passengers
F=Δ(mv)/Δt - 35Force-extension graph of polythene strip:
- 36Crumple zone force extension graph:
Informationen
- Beschreibung
- Stress, Strain and Young Modulus
- Erstellt von
- Doc Boff
- Aufrufe
- 14
- Bewertung
Mehr zu Stress, Strain and Young's Modulus