Quiz

Practice 31 - 60

Gelöschter Nutzer 30 Fragen Aktualisiert am 25 Nov 2018

Quiz starten

Fragen in diesem Quiz (30)

1The storage vendor recommends adjusting the Fibre Channel HBA queue depth to resolve a performance
problem.
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?
1. Aesxcli system module parameters
2. Besxcli storage core device
3. Cesxcli system module set
4. Desxcli storage core adapter
2Which statement applies to the vSphere Replication appliance?
1. AOnly one vSphere Replication appliance can be deployed per vCenter Server instance.
2. BVMware Tools in the vSphere Replication appliance can be upgraded.
3. CA single vSphere Replication appliance can manage a maximum of 4000 replications.
4. DvSphere Replication is available only with the vSphere Essentials Plus license.
3Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)
1. ADirect connect topology is supported.
2. BEach host must have its own boot LUN.
3. CESXi hosts do not require local storage.
4. DMultipathing to a boot LUN on an active-passive array is supported.
5. EHosts can share one common boot LUN.
4An administrator sets the Failover Capacity for both CPU and Memory at 25%.
Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on
additional virtual machines?
1. A45%
2. B25%
3. C70%
4. D60%
5A security officer has issued a new directive that users will no longer have access to change connected network
adapters to limit denial of service on a virtual machine.
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)
1. Aisolation.device.edit.disable = “FALSE”
2. Bisolation.device.edit.disable = “TRUE”
3. Cisolation.device.connectable.disable = “FALSE”
4. Disolation.device.connectable.disable = “TRUE”
6“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere
administrator is not able to use this template for deployment.
Why is the administrator unable to deploy OneAppServer?
1. AOneAppServer must be updated before it can be deployed.
2. BLibraryOne is a subscribed library and OneAppServer is not downloaded yet.
3. CLibraryOne is published and optimized for syncing over HTTP.
4. DOneAppServer was imported from a local file on the system.
7What are two features introduced in Network I/O Control version 3? (Choose two.)
1. ABandwidth reservation per traffic type
2. BNetwork resource pools
3. CCoS tagging
4. DBandwidth guarantee to virtual machines
8An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a
datastore shared by ESXi hosts managed by the vCenter Server systems.
Which action should the administrator take to resolve the issue?
1. AUnmount the datastore and then enable SIOC on the vCenter Server system.
2. BConfigure the datastore to be managed by a single vCenter Server system.
3. CConfigure Storage DRS and then enable SIOC on the vCenter Server system.
4. DEnable Raw Device Mapping (RDM) on the ESXi hosts.
9When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose
three.)
1. ASpace load balancing among datastore within the datastore cluster.
2. BInitial placement for virtual disks based on space and I/O workload.
3. CI/O load balancing among datastores within the datastore cluster.
4. DQueue Depth alerting on disks within the datastore cluster.
5. EData de-duplication within the datastore cluster.
10Which three are supported upgrade processes for ESXi host? (Choose three.)
1. Ausing vSphere Auto Deploy
2. Busing a TFTP server
3. Cusing Update Manager
4. Dusing an ESXCLI command
5. Einstalling from CIFS share

11When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to
vCenter Server Appliance 6.5, which will be the target database?
1. AMicrosoft SQL Server Express 2012R2
2. BMicrosoft SQL Server Standard 2012R2
3. CPostgreSQL
4. DOracle DB 11g
12A user is given the “Virtual machine user (sample)” role in a vSphere 6.x environment.
Which three permissions would the user be able to perform? (Choose three.)
1. AReset a virtual machine.
2. BPower on a virtual machine.
3. CMove a host into a cluster.
4. DConfigure CD media.
5. EMigrate a virtual machine with Storage vMotion.
13Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running
version 6.5?
1. A1024
2. B512
3. C2048
4. D256
14Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)
1. AVirtualMachine.Config.Settings privileges
2. Ban encrypted USB drive
3. CVirtual Hardware version 13 or later
4. DVirtual Hardware version 12 or later
5. EEFI firmware
15Which CLI command shows the physical uplink status for a vmnic?
1. Aesxcli network ip connection list
2. Besxcli network ip neighbor list
3. Cesxcli network nic get
4. Desxcli network nic list
16Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)
1. AMulticast must be enabled on the physical switches and routers that handle vSAN traffic.
2. BvSAN requires IPv6 only.
3. CAll hosts must have a dedicated 40GbE NIC.
4. DThe vSAN network supported IPv4 or IPv6.
5. EvSAN requires IPv4 only.
17Which are three supported storage requirements for vCenter Server HA? (Choose three.)
1. ANFS
2. BRDM
3. CvSAN
4. DVMFS
5. EJBOD
18An administrator wishes to enable network port mirroring based on source port. Which feature should be
enabled?
1. AvSphere standard switch port
2. BERSPAN
3. CNSX Virtual Wire
4. DVLAN
19Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)
1. ANetwork > Move Network
2. BVirtual Machine > Inventory > Move
3. CResource > Migrate powered on virtual machine
4. DDatastore > Allocate Space
20Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?
1. A/var/log/vmware/vpxd/
2. B/var/log/messages
3. C/etc/vmware-vpx/
4. D/var/log/vmware/vsan-health/
21An administrator is attempting to access an ESXi host via the DCUI but is unable to do so.
Which could be two possible causes? (Choose two.)
1. AThe host in question has no out-of-band management capability (i.e. iLO/iDRAC).
2. BThe SSH service is disabled on the host.
3. CStrict lockdown mode is enabled on the host.
4. DNormal lockdown mode is enabled and the administrator is a member of the Exception User list.
5. EThe DCUI service is disabled on the host.
22Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?
1. AAdvanced Configuration Settings
2. BGeneral System Settings
3. CSecurity
4. DNetworking
23Which two events could be the source of the error message? (Choose two.)
1. AvCenter Server failure
2. BVXLAN failure
3. CDisk array failure
4. DNetwork failure
5. EESXi host failure
24An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that
Distributed Switch all display an alert:vSphere Distributed Switch MTU supported status
The administrator has all of the VMkernel ports MTU sizes set to 1600.
Which action will remedy this problem?
1. AConfigure the Distributed Switch to MTU 9100.
2. BDisconnect and reconnect the physical network cable.
3. CConfigure the physical switch to MTU 1600.
4. DDisable the Distributed Switch MTU.
25Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object?
(Choose three.)
1. Aon Disk Format 3.0
2. BHybrid vSAN
3. CAll Flash vSAN
4. DvSAN Advanced License
5. EStretched Cluster Configurations
26In vSphere Data Protection 6.1, which is the function of a Backup Verification job?
1. ANone. Backup Verification job is not a feature of vSphere Data Protection
2. BIt is a manual task
  – Power it on
  – Verify the guest OS
  – Check started applications
3. CIt is an automatic process
  – Restore a virtual machine
  – Power it on
  – Verify that the guest OS is booted by communicating with the Backup Verification agent
4. DIt is an automatic process
  – Restore a virtual machine
  – Power it on
  – Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”
27Which is required for configuring iSCSI Software Adapter network port binding?
1. AVMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
2. BVMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
3. CVMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
4. DVMkernel of the iSCSI traffic must be bound to only one active network adapter.
28An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum
allowed RTT (Round-Trip Time) latency between source and destination host?
1. A100 milliseconds
2. B150 milliseconds
3. C15 milliseconds
4. D10 milliseconds
29An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI
named vmhba33.
Which could be the reason for this?
1. AThe upgrade has changed the vmhba name.
2. BvSphere 6.5 automates iSCSI configurations.
3. CvSphere 6.5 no longer supports software iSCSI.
4. DThe upgrade has deleted the vmhba.
30Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose
two.)
1. Aif a host failover is unsuccessful
2. Bif a virtual machine was removed from vCenter Server’s inventory
3. Cif a virtual machine was deployed from template, and the template has been deleted
4. Dif a virtual machine is unregistered directly on the host

Informationen

Beschreibung: Der Nutzer hat seine Fachbereichs-Information gelöscht. Quiz am Practice 31 - 60 , erstellt von Gelöschter Nutzer am 25/11/2018.
Autor: Gelöschter Nutzer
Sprache: English
Aufrufe: 59
Verlauf: Erstellt am 25 Nov 2018 · aktualisiert am 25 Nov 2018
Schlagwörter: der nutzer hat seine fachbereichs-information gelöscht.

Practice 31 - 60

Fragen in diesem Quiz (30)

Informationen

Feedback

Wie gefällt dir das neue Design?