GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Kostenlos registrieren

Quiz

Quiz chapter 3 - Raheem

groche 9 Fragen

Quiz starten

Fragen in diesem Quiz (9)

  1. 1A technician is troubleshooting a PC that will not boot. When the PC is powered on, it emits a series of beeps and indicates that the BIOS settings have changed and need to be reconfigured. The technician reconfigures the BIOS settings, saves them, and the computer boots. Later when the PC is powered off and back on again, the same error message appears, and all the BIOS changes are gone. What should the technician do to fix the problem?
    1. AReseat the RAM
    2. BReplace the motherboard
    3. CReplace the CMOS battery
    4. DUpgrade the BIOS firmware
  2. 2What is an important step when installing a second PATA hard drive in a computer?
    1. ASet the swap file size on the new drive
    2. BSet the drive ID number with the correct jumper
    3. CConfigure the BIOS settings to auto-detect the master drive
    4. DEnsure that pin one of the PATA data cable is correctly aligned with the connector
  3. 3What number of disks is the required minimum to implement RAID 0?
    1. A1
    2. B2
    3. C3
    4. D4
  4. 4A technician is installing additional memory in a computer. How can the technician guarantee that the memory is correctly aligned?
    1. AThe label on the memory module should always face the CPU
    2. BA notch in the memory module should be aligned with a notch in the memory slot
    3. CThe arrows on the memory module should be aligned with the arrows on the motherboard slot
    4. DMemory slots are color coded, with one end red and one end blue
  5. 5What is an advantage of using signed drivers?
    1. AThey are free of errors
    2. BThey never need upgrading
    3. CThey are guaranteed to work with all operating systems
    4. DThey are verified to be compatible with the operating system
    5. EThey are guaranteed by the manufacturer to work with any hardware
  6. 6Where is the saved BIOS configuration data stored?
    1. ARAM
    2. BCMOS
    3. Ccache
    4. Dhard drive
  7. 7What are two examples of settings that can be changed in the CMOS settings? (Choose two.)
    1. Adrive partition size
    2. Bdevice drivers
    3. Cswap file size
    4. Denabling and disabling devices
    5. Eboot order
  8. 8What are three important considerations when installing a CPU on a motherboard? (Choose three.)
    1. AAntistatic precautions are taken.
    2. BThe CPU is correctly aligned and placed in the socket.
    3. CThe CPU contacts are first cleaned with isopropyl alcohol.
    4. DThe CPU heat sink and fan assembly are correctly installed.
    5. EThe CMOS EPROM battery is removed prior to installing the CPU.
    6. FMaximum insertion force is applied to the load lever so the CPU is locked in place.
  9. 9A technician has been asked to install a second optical drive in a computer. The technician will need to configure the drive as slave. How can the technician accomplish this desired configuration?
    1. AUse jumpers on the motherboard to configure the drive as slave.
    2. BList the drive as slave in the CMOS.
    3. CConnect the drive after the twist in the PATA cable.
    4. DUse jumpers on the drive to configure the drive as slave.

Informationen

Beschreibung
Cisco IIT essentials (Chapter 3 - Computer assembly) Quiz am Quiz chapter 3 - Raheem, erstellt von groche am 27/03/2014.
Autor
groche
Sprache
English
Aufrufe
439
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck