Quiz
Cisco CCNA V5 - Chapter 6 Exam
Fragen in diesem Quiz (19)
1After troubleshooting a router, the network administrator wants to save the router configuration so that it will be used automatically the next time that the router reboots. What command should be issued?
- Acopy startup-config flash
- Bcopy running-config flash
- Creload
- Dcopy startup-config running-config
- Ecopy running-config startup-config
2Which IPv4 header field is responsible for defining the priority of the packet?
- Atraffic class
- Bflow label
- Cflags
- Ddifferentiated services
3When connectionless protocols are implemented at the lower layers of the OSI model, what are usually used to acknowledge the data receipt and request the retransmission of missing data?
- ATransport layer UDP protocols
- Bupper-layer connection-oriented protocols
- Cconnectionless acknowledgements
- DNetwork layer IP protocols
4Why is NAT not needed in IPv6?
- AAny host or user can get a public IPv6 network address because the number of available IPv6 addresses is extremely large.
- BThe end-to-end connectivity problems that are caused by NAT are solved because the number of routes increases with the number of nodes that are connected to the Internet.
- CBecause IPv6 has integrated security, there is no need to hide the IPv6 addresses of internal networks.
- DThe problems that are induced by NAT applications are solved because the IPv6 header improves packet handling by intermediate routers.
5Which three commands are used to set up a password for a person who attaches a cable to a new router so that an initial configuration can be performed? (Choose three.)
- Apassword cisco
- Bline console 0
- Clogin
- Dline vty 0 4
- Einterface fastethernet 0/0
- Fenable secret cisco
6After troubleshooting a router, the network administrator wants to save the router configuration so that it will be used automatically the next time that the router reboots. What command should be issued?
- Acopy running-config startup-config
- Bcopy startup-config flash
- Ccopy running-config flash
- Dreload
- Ecopy startup-config running-config
7What is a service provided by the Flow Label field of the IPv6 header?
- AIt informs network devices to maintain the same path for real-time application packets.
- BIt identifies the total length of the IPv6 packet.
- CIt limits the lifetime of a packet.
- DIt classifies packets for traffic congestion control.
8When connectionless protocols are implemented at the lower layers of the OSI model, what are usually used to acknowledge the data receipt and request the retransmission of missing data?
- Aupper-layer connection-oriented protocols
- BTransport layer UDP protocols
- Cconnectionless acknowledgements
- DNetwork layer IP protocols
9Fill in the blank. In a router, _____ is the nonvolatile memory where the diagnostic software, the bootup instructions, and a limited IOS are stored.
- AROM
- BIdk...
10Which two commands can be used on a Windows host to display the routing table? (Choose two.)
- Aroute print
- Bnetstat -r
- Ctracert
- Dshow ip route
- Enetstat -s
11A technician is manually configuring a computer with the necessary IP parameters to communicate over the corporate network. The computer already has an IP address, a subnet mask, and a DNS server. What else has to be configured for Internet access?
- Athe default gateway address
- Bthe MAC address
- Cthe domain name of the organization
- Dthe WINS server address
12Which command displays a summary chart of all router interfaces, their IP addresses, and their current operational status?
- Ashow ip interface brief
- Bshow interfaces
- Cshow version
- Dshow ip route
13Which two files, if found, are copied into RAM as a router with the default configuration register setting boots up? (Choose two.)
- AIOS image file
- Bstartup configuration
- CPOST diagnostics
- Drunning configuration
14Which two interfaces will allow access via the VTY lines to configure the router? (Choose two.)
- ALAN interface
- BWAN interface
- Cconsole interfaces
- DUSB interfaces
- EAUX interfaces
15A computer has to send a packet to a destination host in the same LAN. How will the packet be sent?
- AThe packet will be sent directly to the destination host.
- BThe packet will be sent only to the default gateway.
- CThe packet will be sent to the default gateway first, and then, depending on the response from the gateway, it may be sent to the destination host.
- DThe packet will first be sent to the default gateway, and then from the default gateway it will be sent directly to the destination host.
16Match the configuration mode with the command that is available in that mode.
- AR1> == enable
- BR1# == copy running-config startup-config
- Clogin == R1(config-line)#
- Dinterface fast ethernet 0/0 == R1(config)#
17Match packets with their destination IP addresses.
- ABlah
- BBlah2
18Which statement about router interfaces is true?
- AA configured and activated router interface must be connected to another device in order to operate.
- BBlah.
19A packet leaving PC-1 has to traverse “_____” hops to reach PC-4.
- ATwo
- BThree
- CFour
- DFive
- E routing table
Informationen
- Beschreibung
- Quiz am Cisco CCNA V5 - Chapter 6 Exam, erstellt von Tim Tam am 25/08/2014.
- Autor
- Tim Tam
- Sprache
- English
- Aufrufe
- 416
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz