Om Ch 14- Final

1. 1Wheeled Coach insists all of the following tasks are key to successful MRP use except

   1. Astringent quality control.
   2. Bmaterials plan must meet both schedule requirements and facility capabilities.
   3. Cplan must be executed as designed.
   4. Dinventory investment must be minimized.
   5. Eexcellent record integrity must be maintained.
2. 2Demand for a given item is said to be dependent if

   1. Athere is a clearly identifiable parent.
   2. Bthere is a deep bill of material.
   3. Cit originates from the external customer.
   4. Dthe finished products are mostly services​ (rather than​ goods).
   5. Ethe item has several children.
3. 3The phrase​ "demand related to the demand for other​ products" describes

   1. Adependent demand.
   2. Ba dependent variable.
   3. Cindependent demand.
   4. Drecursive demand.
   5. Eregression analysis.
4. 4Dependent demand and independent demand items differ in that

   1. AAll of the above are true.
   2. BNone of the above is true.
   3. Cthe need for​ dependent-demand items is calculated.
   4. Dfor any​ product, all components are​ dependent-demand items.
   5. Ethe need for​ independent-demand items is forecast.
5. 5Which of the following is not a key benefit of​ MRP?
   

   1. Aquality increases
   2. Bfaster response to market changes
   3. Creduced inventory levels
   4. Dbetter response times to customer orders
   5. Eimproved utilization of facilities
6. 6Effective use of MRP and other dependent demand models does not require which of the​ following?

   1. Acost of individual components
   2. Binventory availability
   3. Clead times
   4. Dbill of materials
   5. Emaster production schedule
7. 7A master production schedule specifies

   1. Awhat product is to be​ made, and when.
   2. Bthe financial resources required for production.
   3. Cthe raw materials required to complete the product.
   4. Dwhat component is to be​ made, and when.
   5. Ethe labor hours required for production.
8. 8The​ __________ is​ (are) the MRP input detailing which end items are to be​ produced, when they are​ needed, and in what quantities.

   1. Amaster production schedule
   2. Binventory records
   3. Cassembly time chart
   4. Dload report
   5. Ebill of material
9. 9A master production schedule contains information about

   1. Aquantities and required delivery dates of final products.
   2. Bscheduled receipts for each final product.
   3. Cinventory on hand for each final product.
   4. Dquantities and required delivery dates of all subassemblies.
   5. Einventory on hand for each subassembly.
10. 10The aggregate plan gets input or feedback from which of the following​ areas?

    1. AAll of the above.
    2. Bengineering
    3. Cfinance, marketing, and human resources
    4. Dprocurement, production, and general management
    5. Ethe master production schedule

11. 11Which portion of the master production schedule is normally​ fixed, frozen, or​ firm?

    1. Aonly the​ near-term portion
    2. Bonly the middle of the schedule
    3. Conly the aggregate schedule
    4. Donly the​ far-term portion
    5. Ethe entire schedule
12. 12In continuous​ (stock-to-forecast) operations, the master production schedule is usually expressed in terms of

    1. Aend items.
    2. Bcustomer orders.
    3. Ckits.
    4. Dwarehouse orders.
    5. Emodules.
13. 13In job shop​ (make-to-order) operations, the master production schedule is usually expressed in

    1. Acustomer orders
    2. Bwarehouse orders.
    3. Cend items.
    4. Dmodules.
    5. Ekits.
14. 14The table above is an example of​ a(n)

    

    1. Amaster production schedule.
    2. Binventory record.
    3. Caggregate plan.
    4. Dload report.
    5. Ecapacity plan.
15. 15A document calls for the production of 50 small garden tractors in week​ 1; 50 small garden tractors and 100 riding mowers in week​ 2; 100 riding mowers and 200 garden utility carts in week​ 3; and 100 riding mowers in week 4.

    1. Amaster production schedule.
    2. Bnet requirements document.
    3. C​Wagner-Whitin finite capacity document.
    4. Daggregate plan.
    5. Eresource requirements profile.
16. 16The​ __________ is the input to material requirements planning which lists the​ assemblies, subassemblies,​ parts, and raw materials needed to produce one unit of finished product.

    1. Abill of material
    2. Bmaster production schedule
    3. Cinventory records
    4. Dnet requirements chart
    5. Eassembly time chart
17. 17An engineering change notice is used to change​ a(n)

    1. ABOM.
    2. BNone of the above.
    3. CMRP.
    4. DERP.
    5. EMPS.
18. 18Firms making many different final products use​ __________ to facilitate production scheduling.

    1. Amodular bills
    2. Bphantom bills
    3. Coverdue bills
    4. Dplanning bills
    5. ENone of the above.
19. 19A bill of material must be updated with the corrected dimensions of a part. The document that details this change is​ a(n)

    1. Aengineering change notice.
    2. Bresource requirements profile.
    3. Cmodular bill.
    4. Dplanning bill.
    5. Elead​ time-offset product structure document.
20. 20The bill of material contains information necessary to

    1. Aconvert​ (explode) net requirements at one level into gross requirements at the next level.
    2. Bconvert gross requirements into net requirements.
    3. Cplace an order to replenish the item.
    4. Dcalculate quantities on hand and on order.
    5. Econvert net requirements into higher level gross requirements.
21. 21A grill assembly takes 20 washers. Instead of listing these washers separately they are grouped into a single kit for production. The bill of material for the washers is classified as

    1. ABoth "Pseudo" and Planning
    2. B​Low-level.
    3. CModular.
    4. DPlanning.
    5. E​"Pseudo."
22. 22The minimum record accuracy required for successful MRP is approximately

    1. A​99%.
    2. B90%.
    3. C97%.
    4. Dlower than​ 90%.
    5. E​95%.
23. 23If the demand for product A is 50​ units, what will be the gross requirement for component​ E?

    

    1. A300
    2. B250
    3. C100
    4. D200
    5. E4
24. 24If the demand for product A is 50​ units, what will be the gross requirement for component​ E?

    

    1. A50
    2. B300
    3. C100
    4. D150
    5. E200
25. 25Low level coding means that

    1. Aa component item is coded at the lowest level at which it appears in the BOM structure.
    2. Ba final item has only a few levels in the BOM structure.
    3. CNone of the above.
    4. Dthe top level of the BOM is below level zero and that BOMs are not organized around the finished product.
    5. Eit is the code for the lowest level in the BOM structure.

Beschreibung

OM- Final Quiz am Om Ch 14- Final, erstellt von Shelby Reitz am 22/04/2018.

Autor

Shelby Reitz

Sprache

English

Aufrufe

0

Schlagwörter

om- final

Bewertung

Noch keine Bewertungen

Bewerte dieses Quiz

Bewerte dieses Quiz

Mehr zu Production Planning and Scheduling