Quiz
READING TEST 1
Dieses Quiz hat ein Zeitlimit und öffnet sich deshalb im gewohnten Player.
Fragen in diesem Quiz (6)
1In digital passband transmission, the incoming data STREAM is modulated into a carrier with fixed frequency and then transmited over a band-pass channel. Passband digital transmission allows more efficient use of the allocated RF bandwidth, and flexibility in accommodating different baseband signal formats.
The word "stream" as used in the first line could be best replaced by the word:- Atransmission
- Bflow
- Cset
- Dcurrent
2Digital modulation techniques are classified into coherent and noncoherent techniques, depending on whether the receiver is equipped with a phase-recovery circuit or not. The phase-recovery circuit ensures that the local oscillator in the receiver is synchronized to the incoming carrier wave (in both frequency and phase).
There are just TWO types of digital modulation techniques.- ARichtig
- BFalsch
3Closed-loop systems are designed to automatically achieve and maintain the desired output condition by comparing it with the actual condition. It does this by generating an error signal which is the difference between the output and the reference input. In other words, a “closed-loop system” is a fully automatic control system in which its control action being dependent on the output in some way.
What it the main characteristic of a "closed-loop system"?- AIt completely controls an action.
- BIt compares two different signals.
- CIt doesn't generate errors.
- DIts control depends on the output signal.
4Look at the closed-loop control diagram. Which of th following statments is NOT true?

- AThe sensor monitors the actual clothes' dryness.
- BThe feedback is sent to the heating system.
- CThe controller compares input and output signals.
- DThe controller may increase the temperature or heating time.
5The primary goal of CISC architecture is to complete a task in as few lines of assembly as possible. This is achieved by building processor hardware that is capable of understanding and executing a series of operations. For this particular task, a CISC processor would come prepared with a specific instruction (we'll call it "MULT").
The phrase "as few lines of assembly as possible" implies that:- AThe processor is expected to do complex operations with not many resources.
- BThe processor may work with just a part of its resources.
- CThe processor is equipped with a special instruction called MULT.
- DThe processor is able to execute several operations at the same time.
6RISC processors only use simple instructions that can be executed within one clock cycle. Thus, the "MULT" command described above could be divided into three separate commands: "LOAD," which moves data from the memory bank to a register, "PROD," which finds the product of two operands located within the registers, and "STORE," which moves data from a register to the memory banks. In order to perform the exact series of steps described in the CISC approach, a programmer would need to code four lines of assembly.
The number of steps must correspond to the number of code lines.- ARichtig
- BFalsch
Informationen
- Beschreibung
- First reading test
- Sprache
- Español
- Aufrufe
- 39
- Verlauf
- Erstellt am 4 Sep 2018 · aktualisiert am 4 Sep 2018
- Schlagwörter
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz