Heat Transfer Quiz 2_ Villanueva

Beschreibung

Unit Operations (Heat Transfer) Quiz am Heat Transfer Quiz 2_ Villanueva, erstellt von Emier Villanueva am 28/07/2015.
Emier Villanueva
Quiz von Emier Villanueva, aktualisiert more than 1 year ago
Emier Villanueva
Erstellt von Emier Villanueva vor fast 9 Jahre
28
0

Zusammenfassung der Ressource

Frage 1

Frage
This theory states that at least three factors must be known to establish the value of the average film coefficient of steam and organic vapors: the terminal Reynold's number, the Prandtl number of the condensed phase, and a dimensionless group Nd.
Antworten
  • Duckler Theory
  • Dittus-Boelter Theory
  • Deissler Theory
  • Nusselt Theory

Frage 2

Frage
The spectral distribution of a perfect emitter has a maximum and that the corresponding wavelength depends on temperature. The maximum spectral emissive power is displaced to longer wavelengths.
Antworten
  • Rayleigh-Jeans formula
  • Wien equation
  • Planck's law
  • Stefan-Boltzmann law

Frage 3

Frage
The triangular center to center distance of a bank of 8 in OD tubes in a furnace is 8 inches. Estimate the total view factor, F directly intercepted by the first two rows of tubes.
Antworten
  • 0.5
  • 0.6
  • 0.7
  • 0.8

Frage 4

Frage
________ states that: The exchange areas between two pairs of surfaces are equal when there is one-to-one correspondence for all sets of symmetrically positioned pairs of differential elements in the two surface combinations.
Antworten
  • Yamauti principle
  • Crossed-strings theory
  • General matrix principle
  • Total Exchange Area Theory

Frage 5

Frage
A thick-walled copper spherical tank has an inside radius of 1cm and an outside radius of 1.8 cm. The inner and outer surface temperatures are held at 305C and 295C respectively. Assume k varies linearly with temperature, with k_o = 371.9 W/m-K and b = -9.25 E-5 (1/K). Determine the heat loss per unit length.
Antworten
  • 10.5 kW
  • 14.6 kW
  • 15.8 kW
  • 11.6 kW

Frage 6

Frage
A 5-m hemispherical furnace is composed 2 materials with thermal conductivities of k1 = 0.5 W/m-K and k2 = 0.9 W/m-K, respectively. One half of the dome is composed of 0.5 m of material 1 and the other is composed of 0.5 m of material 2. The convective heat transfer coefficient is 6 W/m2-K and the radiative heat-transfer coefficient is 20 W/m2-K. Find the inner temperature of the furnace when the surface temperature of the furnace is 400C. The surrounding temperature of the air is at 30C.
Antworten
  • 877 C
  • 926 C
  • 536 C
  • 1096 C

Frage 7

Frage
Suppose a fictitious metal plate (thickness = 8cm) is to be heated from 43C to 100C. The heating medium is 102C. The heat capacity, density, thermal conductivity and heat transfer coefficient are estimated to be c = 3500 J/kg-C, ρ = 1000 kg/m3, k = 0.5 W/m-K, and h = 0.6 W/m2-K, respectively. Find the total time it takes for this process to be completed. Suppose the initial conditions are stable and consider unsteady-state heat conduction.
Antworten
  • 2,787 min
  • 14,568 min
  • 3,894 min
  • 10,798 min
Zusammenfassung anzeigen Zusammenfassung ausblenden

ähnlicher Inhalt

Flow of Fluids Problems
Dodong Aleta
Heat Transfer and Kinetic Theory
Joseph Tedds
Heat Transfer: Conduction, Convection and Radiation
Quinn Quillfeather
GCSE AQA Physics 1 Heat Transfer
Lilac Potato
Chap.4: Fundamentals of Material Balances
Amirah Hill
Sankey Diagrams
Quinn Quillfeather
Heat Transfer
Jawad Karim
Flow of Fluids Theory
Dodong Aleta
Heat Transfer
sanakaka2
Energy Transfer
Klarissa Aurelia
Heat Transfer and Sankey Diagrams
Quinn Quillfeather