Gestalte GoConqr mit. Was sollen wir als Nächstes hinzufügen?

Quiz

Mechanisms Test

Nuño Nieto 20 Fragen Aktualisiert am 6 Nov 2021

Quiz starten

Dieses Quiz enthält Fragetypen, die sich im gewohnten Player öffnen.

Fragen in diesem Quiz (20)

  1. 1Which of the following definitions corresponds with the meaning of the first movement?
    1. ADiffers from 1 in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed. By arranging three pulleys...
    2. BA method of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are two of these pulleys, side by side, one for each leaf of the belt.
    3. CIllustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys rotate in the same direction.
  2. 2Prove if this is true or false: By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.Bild zu Frage 2
    1. ARichtig
    2. BFalsch
  3. 3The right photo to this question is: a means of converting rotary motion, by which the speed is made uniform during a part, and varied during another part, of the revolution.
    1. ABild zu Antwort A
    2. BBild zu Antwort B
  4. 4Chose the correct answer for the 55 movement:
    1. ADifferent velocity given to two gears, A and C, on the same shaft, by the pinion, B.

      Notes:
      Brown originally referred to the pinion D, but there is no D in the original illustration. We have corrected it to B.
    2. BThe single tooth, A, of the driving-wheel, B, acts in the notches of the wheel, C, and turns the latter the distance of one notch in every revolution of C...
  5. 5True or false: the 69 movement is
    1. ABild zu Antwort A
    2. BBild zu Antwort B
  6. 6The movement of the movement 97 is:
    1. AThis is a heart-cam, similar to 96, except that it is grooved.
    2. BOnly similar to 96
    3. CNot similiar to 96 movement
  7. 7Which of the following definitions are 99,97 movements
    1. AThis is a heart-cam, similar to 96, except that it is grooved.
    2. BSpiral guide attached to the face of a disk; used for the feed-motion of a drilling machine.
    3. CQuick return crank motion, applicable to shaping machines.
  8. 8Correct the definition of the 100 movement: Quick [blank_start]return[blank_end] crank motion, applicable to shaping [blank_start]machines[blank_end].
    1. Amachines
    2. Breturn
  9. 9The right image and definition is:
    1. ABy giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.Bild zu Antwort A
    2. BResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.Bild zu Antwort B
    3. CResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.Bild zu Antwort C
  10. 10The right photo and definition of the 94 movement is:
    1. AA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.Bild zu Antwort A
    2. BOrdinary crank motion.Bild zu Antwort B
    3. CA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.Bild zu Antwort C
    4. DVariable crank, two circular plates revolving on the same center. In one a spiral groove is cut; in the other a series of slots radiating from the center. On turning one of these plates around its center, the bolt shown near the bottom of the figure, and which passes through the spiral groove and radial slots, is caused to move toward or from the center of the plates.Bild zu Antwort D

Informationen

Beschreibung
Quiz am Mechanisms Test, erstellt von Nuño Nieto am 03/11/2021.
Sprache
Español
Aufrufe
2
Verlauf
Erstellt am 3 Nov 2021 · aktualisiert am 6 Nov 2021
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Mehr zu Motion Transmission and Transformation

Feedback

Worum geht es?

Was sollen wir als Nächstes hinzufügen?