Quiz
IOT V4
Erstelle ein kostenloses Konto, um dieses Quiz zu beenden
Speichere deinen Fortschritt und sieh dir dein Endergebnis an.
oder mit deiner E-Mail registrieren
Schon ein Konto? Anmelden
Fragen in diesem Quiz (135)
1"Sensor is sensitive to only the measured property. It is insensitive to any other property besides what it is designed to detect." True or false?
a. True
b. False- Aa
- Bb
2Which of the following is/are not a type of transducer?
a. Speaker
b. Microphone
c. Solar panel
d. Connecting wire- Aa
- Bb
- Cc
- Dd
3"_______ sensors produce an output proportional to the magnitude of the quantity being
measured." Fill in the blank.
a. Scalar
b. Vector
c. Analog
d. Digital- Aa
- Bb
- Cc
- Dd
4What is the resolution of a sensor?
a. It provides the difference between the measured value and the actual value of the sensing parameter.
b. It provides the smallest change in the input that a sensor is capable of sensing.
c. It provides the incremental changes produced in response by the system.
d. All of the above.- Aa
- Bb
- Cc
- Dd
5_______ is a part of the system that deals with the control actions required in the
system.
a. Sensor
b. Actuator
c. Manager
d. None of the above- Aa
- Bb
- Cc
- Dd
6What is the function of an electric rotary actuator?
a. Converts mechanical energy into electrical energy
b. Converts analog signals to digital signals
c. Converts electrical energy into rotational motion
d. All of the above- Aa
- Bb
- Cc
- Dd
7Which of the following communication standards provide a framework for WPAN?
a. 6LowPan
b. IEEE 802.15.4
c. Z-wave
d. Wireless HART- Aa
- Bb
- Cc
- Dd
8The IEEE 802.15.4 standard uses DSSS scheme for data transmission. What does DSSS stand for?
a. Double Spread Spectrum Scheme
b. Direct-Sequence Spread Spectrum
c. Discrete-Sequence Spread Spectrum
d. Dynamic-Sequence Spread Spectrum- Aa
- Bb
- Cc
- Dd
9When does Zigbee uses the OQPSK modulation scheme?
a. When the operating frequency is less the 2.4 GHz
b. When the operating frequency is more than 2.4 GHz
c. When the operating frequency is 2.4 GHz
d. All of the above- Aa
- Bb
- Cc
- Dd
10Which of the following statements is true about the end devices in Zigbee protocol?
a. End devices do not participate in data routing
b. End device manages and controls the network
c. End devices contribute in data relaying
d. There can be only one end device in a Zigbee network- Aa
- Bb
- Cc
- Dd
11What is the maximum packet size supported by IEEE 802.15.4 standard?
a. 1280 bytes
b. 125 bytes
c. 127 bytes
d. 256 bytes- Aa
- Bb
- Cc
- Dd
12Z-wave uses _______ network topology. Fill in the blank.
a. Bus
b. Star
c. Tree
d. Mesh- Aa
- Bb
- Cc
- Dd
13Passive tags in RFID are powered by their own power source. True or False?
a. True
b. False- Aa
- Bb
14What is the full form of IETF in the context of the Internet?
a. Internet Enforced Task Force
b. Internet for Engineers Task Force
c. Internet Engineers Task Force
d. Internet Engineering Task Force- Aa
- Bb
- Cc
- Dd
15MQTT works on a. Push/Pull __________ framework on top of TCP/IP. Fill in the blank.
a. Push/Pull
b. Publish/Subscribe
c. Client/Server
d. None of the above- Aa
- Bb
- Cc
- Dd
16Which of the following is a feature of the Fourth industrial revolution?
a. Use of Mainframes and the Internet
b. Mass production d. Use of Al ML, and CPS
c. Utilization of machines in production processes
d. Use of Al ML, and CPS- Aa
- Bb
- Cc
- Dd
17___________has helped in producing objects that are mutable and adaptable. Fill in the blank.
a. Digital fabrication
b. Additive manufacturing
c. Synthetic biology
d. None of the above- Aa
- Bb
- Cc
- Dd
18 Select the option that best describes the tipping point.
a. Radical change in the future that leads to innovation
b. Change that leads to failing economy
C. A point which marks the profit in business
d. A space in factory floor for goods collection- Aa
- Bb
- Cc
- Dd
19Which of the following is/are drivers of sustainability in Industry 4.0?
a. Globalization
b. Socio-economic factors
c. Environmental factors
d. All of the above- Aa
- Bb
- Cc
- Dd
20Information regulation in public is covered under which of the following laws?
a. Employment and Labor rules
b. Advertisement regulations
c. Environmental rules
d. Privacy regulation- Aa
- Bb
- Cc
- Dd
21How does population growth affect the manufacturing industry?
a. It affects the food supplies
b. It affects the availability of industrial locations
c. It affects the political actions and outcomes
d. All of the above- Aa
- Bb
- Cc
- Dd
22Which of the following statements is true about recession?
a. Recession is the extremity of depression
b. Recession stavs for only two months
C. Recession is observable on GDP of a country
d. All of the above- Aa
- Bb
- Cc
- Dd
23The lean manufacturing system, introduced by Toyoto, is based on which of the following approaches?
a. JIDOKA
b. JIT
c. Both a and b
d. SUDOKA- Aa
- Bb
- Cc
- Dd
24Which of the following is not an impact of the Lean production system on manufacturing?
a. Highest lead time
b. Low cost
c. High quality
d. All of the above- Aa
- Bb
- Cc
- Dd
25What is KPI in the context of performance management?
a. Key Product Index
b. Key Performance Indicator
c. Key Performance Index
d. Key Product Identifier- Aa
- Bb
- Cc
- Dd
26Which of the following statements is/are true about smart and connected products?
a. Smart and connected products are cheaper
b. Decrease environmental impact
C. Improves recall process of products
d. All of the above- Aa
- Bb
- Cc
- Dd
27Lock-in centric business models helps in
a. Preventing customer migration
b. Eliminating errors
c. Making faster transactions
d. Creating new market for innovative product- Aa
- Bb
- Cc
- Dd
28What is the function of the digital layer in a smart business architecture?
a. Data storage
b. Data analysis
c. Data processing
d. All of the above- Aa
- Bb
- Cc
- Dd
29Which of the following is not a characteristic of a smart factory?
a. Proactivity
b. Agility
c. Opaque
d. Optimization- Aa
- Bb
- Cc
- Dd
30 Which of the following falls under the Agility characteristic of a smart factory?
a. Predicting future challenges
b. Real-time tracking
c. Connected smart devices
d. Self-configuration- Aa
- Bb
- Cc
- Dd
31What is the full form of CPS?
a. Central-Physical System
b. Cyber-Physical System
c. Cyber-Property System
d.Central-Private System- Aa
- Bb
- Cc
- Dd
32Select the statements) that best describes a CPS.
a. A CPS interacts with the physical world through sensors and actuators.
b. A CPS is a network of physical and computational components.
c. It is a set of multiple networked embedded systems.
d. All of the above- Aa
- Bb
- Cc
- Dd
33What does conversion refer to in context of CPS architecture for loT?
a. Conversion of CPS into individual components.
b. Conversion of machine data to meaningful information.
c. Conversion of present data into future data prediction.
d. Conversion of analog signal to digital signal.- Aa
- Bb
- Cc
- Dd
34Select the statement which describes one of the limitations of smart sensors.
a. Sensor data aggregation not possible.
b. Cannot connect with an actuator.
Cannot connect to a network
d. All of the above- Aa
- Bb
- Cc
- Dd
35 ______sensors are capable of processing sensed data and performing pre-defined functions by processing data. Fill in the blank with the appropriate option.
a. Smart
b. Intelligent
c. Digital
d. Scalar- Aa
- Bb
- Cc
- Dd
36Which of the following allows application-specific customization of sensor nodes?
a. Smart sensors
b. Intelligent sensors
c. ADC
d. None of the above- Aa
- Bb
- Cc
- Dd
37________allows employees to share information and solve business problems. Fill in the blank.
a. Sharing platform
b. Business platform
c. E-Commerce platform
d. Collaboration platform- Aa
- Bb
- Cc
- Dd
38Coordination is one of the four keys that enable collaboration productivity. How can one initiate coordination?
a. Provide authority to decision-makers in a decentralized system.
b. Format data model to store every data element exactly once.
c. Bridge the gap between the virtual and physical world.
d. All of the above- Aa
- Bb
- Cc
- Dd
39How many components are there in PLM that are used to handle a product across its lifetime?
a. 3
b. 5
c. 7
d. 9- Aa
- Bb
- Cc
- Dd
40Which of the following statements is true about Augmented reality?
a. It is a mixture of interactive hardware and software-based artificial environment.
b. It creates and enhances an imaginary reality.
c. It amplifies the present perception of reality.
d. All of the above- Aa
- Bb
- Cc
- Dd
41What is proiection-based AR?
a. It gives outcomes by projecting light on real world surfaces.
b. It substitutes the original view with of an object with the augmented view.
c. It gives the output when a marker is detected.
d. It is used for GPS-denied regions- Aa
- Bb
- Cc
- Dd
42Semi-immersive simulation is a type of
a. AR
b. VR
c. Both a and b
d. None of the above- Aa
- Bb
- Cc
- Dd
43Which of the following search methods is used by a computer program that does not use artificial intelligence?
a. Heuristic
b. Algorithmic
c. Approximation
d. None of the above- Aa
- Bb
- Cc
- Dd
44Select the correct statement.
a. Artificial intelligence is a type of machine learning
b. Deep learning is a subset of machine learning
c. Deep learning cannot learn the features on its own.
d. Machine learning is a subset of deep learning.- Aa
- Bb
- Cc
- Dd
45Which of the following statements is true about the GFS file system?
a. It is based on the Hadoop Distributed File System
b. It is a distributed file system that supports large-scale file system
c. It is a centralized file management system
d. It is a file system designed specifically for unstructured data management- Aa
- Bb
- Cc
- Dd
46Cybersecurity involves the security of
a. Hardware and software
b. Software and data
c. Hardware, software, and data
d. Hardware, software, data and processes- Aa
- Bb
- Cc
- Dd
47_____security represents the set of policies that monitor and prevent unauthorized access. safeguard the data and network from network traffic. Fill in the blank.
a. Information
b. Hardware
c. Software
d. Network- Aa
- Bb
- Cc
- Dd
48 Locky is an example of which type of cybersecurity threat?
a. Ransomware
b. Malware
c. Phishing
d. All of the above- Aa
- Bb
- Cc
- Dd
49What does C represent in the CIA-Triad in cybersecurity?
a. Cyber-physical
b. Centralized
c. Confidentiality
d. Critical- Aa
- Bb
- Cc
- Dd
50What is ubiquitous sensing in loT?
a. In lloT, sensors and actuators are used to control critical elements.
b. In loT, sensors and actuators are used almost everywhere to control, enhance and optimize various functions.
c. In loT, advanced analytics helps to enhance the working condition, increase machine life and optimize operational efficiency.
d. None of the above- Aa
- Bb
- Cc
- Dd
51Which of the following is a data integration challenge in deploying loT?
a. Understanding the generated data for analysis and application in business.
b. Storing the data
c. Lack of skills
d. Cybersecurity- Aa
- Bb
- Cc
- Dd
52 Commercialization and the mass production of steam engines marked the beginning of the________ stage of the Industrial revolution. Fill in the blank.
a. Fourth
b. Third
c. Second
d. First- Aa
- Bb
- Cc
- Dd
53What were the negative effects of Industrial revolution?
a. Harm to environment by waste products
b. Inefficient
c. Bad working environment
d. All of the above- Aa
- Bb
- Cc
- Dd
54How many key elements are there in the Industrial internet?
a. 4
b. 3
C. 5
d. 2- Aa
- Bb
- Cc
- Dd
55How does sensing contributes to the industry?
a. Increase downtime
b. Increase cost
c. Higher degree of automation
d. Safety hazards- Aa
- Bb
- Cc
- Dd
56A smart sensor can perform multiple sensing, unlike the traditional sensors. True or false?
a. True
b. False- Aa
- Bb
57What is self-decision making in a smart sensor?
a. It can self-monitor its operation and changes in the ambience by taking proper decision by itself.
b. Reduce the cost by reduced downtime
c. Communicate data
d. Enable multiple parameter sensing- Aa
- Bb
- Cc
- Dd
58What is the full form of SCADA?
a. Supervisory Confidential and Data Acquisition
b. Supervisory Control and Data Acquisition
c. Smart Control and Data Acquisition
d. Smart Controlled and Direct Acquisition- Aa
- Bb
- Cc
- Dd
59What does the Cognitive layer in the 5C architecture for Cyber-physical Systems represents?
a. System for supervised control: Self-configure, Self-Optimize, Self-Adjust
b. Sensor records machine health data: data to information interpretation
c. System for optimized decision: Human-readable interpretation & data visualization
d. All of the above- Aa
- Bb
- Cc
- Dd
60How can smart factory be beneficial in inventory tracking?
a. Global inter-connectivity of smart factory facilitates real-time updates of nventory
b. Ease of process re-adjustment facility
c. End-to-end production line management with sensors
d. None of the above- Aa
- Bb
- Cc
- Dd
61Which of the following is a feature of Amazon Smart Warehousing’s logistics and supply chain management?
a) Manual control of supply fleet
b) Logistic status update with future market demand
c) Centralized customer service
d) Distributed parking and space surrounding control- Aa
- Bb
- Cc
- Dd
62How does Boeing achieve efficient manufacturing?
(a) Using smart & digital manufacturing facility
(b) By lowering assembly delay & response time
(c) By reducing errors in manufacture & assembly
(d) All the above- Aa
- Bb
- Cc
- Dd
63Which of the following company provides Air-as-a-Service?
(a) Kaeser Kompressoren
(b) Hitachi
(e) John Deere
(d) Komatsu- Aa
- Bb
- Cc
- Dd
64According to the International Labor Organization, what is the approximate death rate owing to occupational disease or accident?
(a) ~1/5 seconds
(b) ~1/10 seconds
(c) ~1/15 seconds
(d) ~1/20 seconds- Aa
- Bb
- Cc
- Dd
65What is a Business Model?
(a) A business model describes the rationale of how an organization creates, delivers, and captures value.
(b) It is the embodiment of the organizational and financial architecture of a business.
(c) It is the description of how a business intends to operate and earn profits in a specific marketplace.
(d) All of the above- Aa
- Bb
- Cc
- Dd
66What is a Market Segment?
(a) It is the different groups of customers or end-user organizations that the business enterprise aims to serve.
(b) It is the key resources and activities that a business requires to create value proposition.
(c) It is the products or services that create value for the customer segment.
(d) All of the above- Aa
- Bb
- Cc
- Dd
67 Which of the following statement is untrue w.r.t. Subscription Model?
(a) It can be used for Smart Energy
(b) It brings together the businesses and their customers to monetize the solutions
(c) It aims to minimize downtime and maximize utilization of the assets
(d) It is not capable of generating “recurring” revenue- Aa
- Bb
- Cc
- Dd
68Which of the following is not an IloT business models?
(a) Cloud-based Business Model
(b) Service-Oriented Business Model
(c) Outcome-based Business Model
(d) Process-Oriented Business Model- Aa
- Bb
- Cc
- Dd
69Which of the following Cloud-Based Business Model aims to provide the required hardware and software online in the cloud?
(a) Infrastructure-as-a-Service
(b) Platform-as-a-Service
(c) Software-as-a-Service
(d) All of the above- Aa
- Bb
- Cc
- Dd
70Which of the following is a/are challenge(s) of HoT Business Model?
(a) Lack of interoperability
(b) Immature or untested technologies
(c) Increase complexity
(d) All of the above- Aa
- Bb
- Cc
- Dd
71What is the full form of IRA?
(a) Industrial Internet Related Architecture
(b) Industrial Internet Regional Architecture
(c) Industrial Internet Reference Architecture
(d) Industrial Internet Real-time Architecture- Aa
- Bb
- Cc
- Dd
72“Industrial Internet Consortium (IC) is a non-profit organization created to promote open standards and interoperability for industry technologies and machine-to-machine (M2M) environments.” – Is the statement True or False?
(a) True
(b) False- Aa
- Bb
73Which of the following are the components of Gateway-Mediated Edge Architecture?
(a) Edge layer, Platform layer, Enterprise layer
(b) Physical layer, Edge devices/Gateway. Cloud
(c) Sensors and Actuators, Edge devices Gateway, Wide Area Network
(d) Smart Machines, System of Systems, Industrial Internet- Aa
- Bb
- Cc
- Dd
74Which of the following is not a viewpoint of IIRA?
(a) Business viewpoint
(b) Market viewpoint
(c) Functional viewpoint
(d) Usage viewpoint- Aa
- Bb
- Cc
- Dd
75How many domains are there in the Functional Viewpoint of IIRA?”
(a) 4
(b) 5
(c) 6
(d) 7- Aa
- Bb
- Cc
- Dd
76Why is it necessary to have fog computing in loT?
a. To enable new functionalities
b. To enrich the current functionalities available
c. To process control analytics
d. All of the above- Aa
- Bb
- Cc
- Dd
77What is the sub-application area of fog computing in smart road transportation systems?
a. Smart traffic signal system
b. Healthcare
c. Mining industry
d. None of the above- Aa
- Bb
- CC
- Dd
78State true or false – Smart parking, smart traffic light systems, location-aware services, and the Internet of Vehicles are the possible use cases of the fog-based solutions for transportation.
a. True
b. False- Aa
- Bb
79Which of the following provides the fog platform?
a. Nebbiolo Technologies
b. Crosser
c. FogHorn
d. All of the above- Aa
- Bb
- Cc
- Dd
80Which of the following represents reserve word(s) in R programming?
a. LOOPING
b. TRUE
c. BREAK-IN
d. CONTINUING- Aa
- Bb
- Cc
- Dd
81Which of the following cannot be performed by R programming?
a. Assembly code generation
b. Data visualization
c. Graphics representation
d. Data Analysis- Aa
- Bb
- Cc
- Dd
82Which of the following way/s can be used for the declaration of variables in R programming?
a. A:=10
b. B<->”Hi”
c. TRUE->C
d. 10<-D- Aa
- Bb
- Cc
- Dd
83Fill in the blanks.
_________operator can be used to calculate the remainder of the division in R programming.
a. /
b. \
C. %%
d. !- Aa
- Bb
- Cc
- Dd
84State true or false – ‘&’ is a special operator that can create a series of numbers for a vector in R programming.
a. True
b. False- Aa
- Bb
85Which of the following represents the correct order for the process of Data management?
a. Acquisition -> Generation -> Storage -> Analysis
b. Generation -> Acquisition -> Storage -> Analysis
c. Acquisition -> Storage -> Generation -> Analysis
d. Generation -> Analysis -> Storage -> Acquisition- Aa
- Bb
- Cc
- Dd
86Fill in the blanks ______analyze the geographic relation among them. is used to find the spatial relationship between the objects and to
a. Streaming analytics
b. Time-series analytics
c. Spatial analytics
d. Descriptive analytics- Aa
- Bb
- Cc
- Dd
87Which of the following represents the properties of data center networks?
a. Inconsistent
b. Unreliable
c. Secure
d. Unscalable- Aa
- Bb
- CC
- Dd
88State true or false -Software-Defined Network (SD) never use OpenFlow protocol.
a. True
b. False- Aa
- Bb
89Which of the following represents the topology used by the data center network?
a. Eight-tier DCN
b. Jcell
c. Dcell
d. QCube- Aa
- Bb
- Cc
- Dd
90What are the challenges of a data center network?
a. Scalability
b. Static resource assignment
c. Fault-tolerance
d. All of the above- Aa
- Bb
- Cc
- Dd
91Which of the following is/are available within the public network in an SDIloT architecture?
a. Switches
b. Routers
c. Both (a) and (b)
d. None of the above- Aa
- Bb
- Cc
- Dd
92Which of the following is addressed by a trustworthy loT?
a. Security
b. Safety
c. Resilience
d. All of the above- Aa
- Bb
- CC
- Dd
93State true or false – In SDIloT architecture, the industrial cloud focuses on the data center
network.
a. True
b. False- Aa
- Bb
94Fill in the blanks. The application layer of IIoT attack vectors includes ___________.
a. Traffic Flooding
b. Misrouting
c. Data spoofing
d. Packet sniffing- Aa
- Bb
- Cc
- Dd
95Which of the following is not a part of IIoT attack vectors in the physical layer?
a. Impersonation attack
b. Man-in-the-middle attack
c. Jamming attack
d. Device tampering- Aa
- Bb
- Cc
- Dd
96Which of the following risk(s) is/are involved in IIoT security risk management?
a. Avoiding risk
b. Mitigating risk
c. Outsourcing risk
d. All of the above- Aa
- Bb
- Cc
- Dd
97The building blocks of IIoT security include which of the following?
a. Cloud Security
b. Fog device protections
c. Data Protection
d. All of the above- Aa
- Bb
- Cc
- Dd
98Fill in the blanks. Security standards for IIoT should include requirements of _______ and
_______.
a. International technology, Optional technology
b. Information technology, Operational technology
c. Intense technology, Operative technology
d. None of the above- Aa
- Bb
- Cc
- Dd
99State true or false — The data protection of IIoT security does not address confidentiality.
a. True
b. False- Aa
- Bb
100Which of the following represents the benefits of a smart factory?
a. Unavailability of the real-time data
b. Unbalanced workload
c. Provisioning data analysis and quality control
d. Extended production time- Aa
- Bb
- Cc
- Dd
101Match the following.
Features of Smart Factory Description
1. Connected i. Minimum manual intervention
2. Transparent ii. Continuous real-time data
3. Agile iii. Live metrics for quick decision
4. Optimized iv. Flexibility and adaptability
a. 1-i, 2-ii, 3-iii, 4-iv
b. 1-ii, 2-iii, 3-iv, 4-i
c. 1-iii, 2-iv, 3-i, 4-ii
d. 1-iv, 2-i, 3-ii, 4-iii- Aa
- Bb
- Cc
- Dd
102Which of the following is false about Fanuc – Zero Downtime System?
a. Is a robot maker
b. Uses predictive maintenance for reducing downtime
c. Does not predict component failure
d. Performs cloud-based analytics with the help of in-built sensors- Aa
- Bb
- CC
- Dd
103State true or false. CityCrop renders intelligent indoor gardens for growing fruits, herbs,
vegetables, greens, and edible flowers.
a. True
b. False- Aa
- Bb
104Which of the following does not represent the characteristics of a smart factory?
a. Connected environment
b. Improper utilization of resources
c. Dynamic decision making
d. Transparency of process status- Aa
- Bb
- Cc
- Dd
105State true or false - As different persons and devices are associated with healthcare IoT
systems, the risk of data tampering is high.
a. True
b. False- Aa
- Bb
106Which of the following is/are the major challenge(s) associated with the healthcare industry?
a. Drug overdose
b. Wrong drug prescription
c. Costly hospitals and clinics
d. All of the above- Aa
- Bb
- Cc
- Dd
107Fill in the blanks. _________ is an example of a wireless ECG monitoring device.
a. QardioCore
b. BMP280
c. ESP8266
d. BME280- Aa
- Bb
- CC
- Dd
108Which of the following is a body temperature monitoring device?
a. Ihealth BP5
b. Kinsa smart thermometer
c. Dexcom
d. ADAMM- Aa
- Bb
- Cc
- Dd
109Which of the following represents an intelligent asthma monitoring device?
a. BME280
b. Kinsa smart thermometer
c. ADAMM
d. Dexcom- Aa
- Bb
- Cc
- Dd
110Which of the following does not represents the challenge of IIoT in a power plant?
a. Security issues
b. Scalability issues
c. Smart metering
d. Low power devices- Aa
- Bb
- Cc
- Dd
111Fill in the blanks. ______ is the full form of SCDA.
a. Supervisory Control and Data Acquisition
b. Superlative Control and Data Acquitance
c. Supervisory Condition and Data Acceptance
d. None of the above- Aa
- Bb
- Cc
- Dd
112Which of the following does not represents communication networks?
a. Home area network
b. House area network
c. Wide area network
d. Neighborhood area network- Aa
- Bb
- Cc
- Dd
113State true or false — RFID tagging system comprises of RFID tag, read/write devices, and a
host system.
a. True
b. False- Aa
- Bb
114Which of the following is true about passive RFID tags?
a. Broadcasts information signals in the form of a beacons
b. Relies on backscattering
c. Have longer range than active RFID tags
d. Bulky and expensive as compared to active RFID- Aa
- Bb
- Cc
- Dd
115Which of the following is represented through the following statement?
Statement- It has an onboard battery for powering the IC but does not have an active
transmitter. It relies on backscattering. However, it neither depends on signals from the reader
for power nor creates additional noise.
a. Active RFID tags
b. Passive RFID tags
c. Semi-passive Tags
d. None of the above- Aa
- Bb
- Cc
- Dd
116Match the following.
Types of Network Security Description
1. Firewalls i. Provide access based on user identity
2. Intrusion prevention systems ii. Scan for malware detection and prevention
3. Access control iii. Barrier between the trusted internal
network and the external networks
4. Antivirus and antimalware software iv. Detection and blocking attacks
a. 1-iii, 2-iv, 3-i, 4-ii
b. 1-ii, 2-iii, 3-iv, 4-i
c. 1-i, 2-ii, 3-iii, 4-iv
d. 1-iv, 2-i, 3-ii, 4-iii- Aa
- Bb
- Cc
- Dd
117Which of the following is an example of augmented reality?
a. Oculus Rift
b. Samsung Gear VR
c. Bus stop prank by Pepsi Max
d. Google Cardboard- Aa
- Bb
- CC
- Dd
118Which of the following represents IoT applications in facility management?
a. Smart meter
b. Security and safety alarms
c. Both (a) and (b)
d. Neither (a) nor (b)- Aa
- Bb
- Cc
- Dd
119Which of the following does not represents the benefit of the IIoT applications in inventory
management?
a. Automation in the process of inventory tracking and packing
b. Inability to recognize the reason behind the bottlenecks in the operation
c. Optimization of the amount of inventory
d. Real-time update of the quantity of inventory items, their location, and tracking- Aa
- Bb
- Cc
- Dd
120Which of the following can be achieved by performing analytics in facility management?
a. Unmanaged energy consumption
b. Unoptimized operational cost
c. Remote monitoring of the facilities
d. None of the above- Aa
- Bb
- Cc
- Dd
121What are the benefits of using IoT in Oil and Gas Industries?
a. Decreased production efficiency
b. Save cost and time
c. Deteriorate asset maintenance
d. None of the above- Aa
- Bb
- Cc
- Dd
122Which of the following statement does not represents the advantage of using IoT in the
chemical industry?
a. Predictive maintenance
b. Reduce energy expenses
c. Maximize supply chain risks
d. Improve logistics- Aa
- Bb
- CC
- Dd
123What is/are the advantages of using IoT in the Pharmaceutical industry?
a. Real-time monitoring
b. Inability to control the areas remotely
c. Increased production cost and wastage
d. All of the above- Aa
- Bb
- Cc
- Dd
124Which of the following can be performed through predictive maintenance?
a. Address real-time issues
b. Reduce equipment breakdown
c. Efficient and effective maintenance
d. All of the above- Aa
- Bb
- Cc
- Dd
125State true or false — Through the application of IoT in the Pharmaceutical industry, it is
possible to examine drugs and detect adverse drug reactions.
a. True
b. False- Aa
- Bb
126Which of the following is true about the features of second-generation UAVs?
a. Static design, fixing camera mount, still photography, video recording, and manual
steering control
b. Transformable designs, 1080 HD video or higher value instrumentation, three-axis
gimbals
c. Improved safety and regulatory, platform and payload adaptability, automated safety
modes
d. Enhanced intelligent piloting models and full autonomy, full airspace awareness, auto
action- Aa
- Bb
- Cc
- Dd
127What is/are the application field(s) of UAVs?
a. Agriculture
b. Mining
c. Forestry
d. All of the above- Aa
- Bb
- Cc
- Dd
128Which of the following does not represents an application of UAV in Agriculture?
a. Crop health monitoring
b. Monitoring soil quality, counting plants, identifying plot size
c. Inspect construction site infrastructure and construct roadways
d. Increase effective yields- Aa
- Bb
- Cc
- Dd
129State true or false — Precision forestry and canopy mapping cannot be performed through
the application of UAV in forestry.
a. True
b. False- Aa
- Bb
130Which of the following does not represents the application of UAVs for energy
management?
a. Optimized use of seed, fertilizer, and water
b. Eliminate the need to get close to the dangerous wires
c. Inspections without climbing power poles
d. None of the above- Aa
- Bb
- Cc
- Dd
131State true or false — One of the applications of UAVs in telecommunication is to perform
tower inspection.
a. True
b. False- Aa
- Bb
132Match the following.
Sector Application of UAVs
1. Mining i. Scan a large number of items available in a
warehouse
2. Healthcare ii. Regular surface survey for optimized blast
design
3. Forestry iii. Delivery of medicines, vaccines, and
snake bite serum
4. Warehousing iv. Display information about the forest
species
a. 1-iii, 2-iv, 3-i, 4-ii
b. 1-ii, 2-iii, 3-iv, 4-i
c. 1-i, 2-ii, 3-iii, 4-iv
d. 1-iv, 2-i, 3-ii, 4-iii- Aa
- Bb
- CC
- Dd
133What is/are the application(s) of UAVs in oil and gas industry?
a. Reducing manpower requirements and increasing safety by eliminating the need for
industrial mountaineering
b. Monitoring pipelines for detecting leakage of oil and gas pipelines
c. Collecting videos and thermal imagery of oil and gas fields
d. All of the above- Aa
- Bb
- Cc
- Dd
134State true or false - UAV-based light displays are generally more expensive than traditional
firework displays and cannot be reused.
a. True
b. False- Aa
- Bb
135Which of the following is/are true about the necessity of case studies?
a. The case study investigates real-life phenomena through a detailed analysis of related
events.
b. The case study generally selects a vast geographical area or a large number of
individuals as the subject matter.
c. Both (a) and (b)
d. Neither (a) nor (b)- Aa
- Bb
- Cc
- Dd
Informationen
- Beschreibung
- Quiz am IOT V4, erstellt von Amrit Dash am 06/10/2023.
- Autor
- Amrit Dash
- Sprache
- English
- Aufrufe
- 21
- Schlagwörter
- Bewertung
- Noch keine Bewertungen Bewerte dieses Quiz