Review Questions - Chapter 5 VLSMs, Summarization, and Troubleshooting TCP/IP

Beschreibung

Network Fundamentals 1.7 Apply troubleshooting methodologies to resolve problems 1.7.a Perform fault isolation and document 1.7.b Resolve or escalate 1.7.c Verify and monitor resolution 1.8 Configure, verify, and troubleshoot IPv4 addressing and subnetting
Kessi Silva
Quiz von Kessi Silva, aktualisiert more than 1 year ago
Kessi Silva
Erstellt von Kessi Silva vor mehr als 6 Jahre
353
0

Zusammenfassung der Ressource

Frage 1

Frage
On a VLSM network, which mask should you use on point-to-point WAN links in order to reduce the waste of IP addresses?
Antworten
  • /27
  • /28
  • /29
  • /30
  • /31

Frage 2

Frage
In the network shown in the diagram, how many computers could be in Network B?
Antworten
  • 6
  • 12
  • 14
  • 30

Frage 3

Frage
In the following diagram, in order to have IP addressing that’s as efficient as possible, which network should use a /29 mask?
Antworten
  • A
  • B
  • C
  • D

Frage 4

Frage
To use VLSM, what capability must the routing protocols in use possess?
Antworten
  • Support for multicast
  • Multiprotocol support
  • Transmission of subnet mask information
  • Support for unequal load balancing

Frage 5

Frage
What summary address would cover all the networks shown and advertise a single, efficient route to Router B that won’t advertise more networks than needed?
Antworten
  • 172.16.0.0/24
  • 172.16.1.0/24
  • 172.16.0.0/25
  • 172.16.0.0/20
  • 172.16.16.0/28
  • 172.16.0.0/27

Frage 6

Frage
In the following diagram, what is the most likely reason the station cannot ping outside of its network?
Antworten
  • The IP address is incorrect on interface E0 of the router.
  • The default gateway address is incorrect on the station.
  • The IP address on the station is incorrect.
  • The router is malfunctioning.

Frage 7

Frage
If a host is configured with an incorrect default gateway and all the other computers and router are known to be configured correctly, which of the following statements is TRUE?
Antworten
  • Host A cannot communicate with the router.
  • Host A can communicate with other hosts in the same subnet.
  • Host A can communicate with hosts in other subnets.
  • Host A can communicate with no other systems.

Frage 8

Frage
Which of the following troubleshooting steps, if completed successfully, also confirms that the other steps will succeed as well?
Antworten
  • Ping a remote computer.
  • Ping the loopback address.
  • Ping the NIC.
  • Ping the default gateway.

Frage 9

Frage
When a ping to the local host IP address fails, what can you assume?
Antworten
  • The IP address of the local host is incorrect.
  • The IP address of the remote host is incorrect.
  • The NIC is not functional
  • The IP stack has failed to initialize.

Frage 10

Frage
When a ping to the local host IP address succeeds but a ping to the default gateway IP address fails, what can you rule out? (Choose all that apply.)
Antworten
  • The IP address of the local host is incorrect.
  • The IP address of the gateway is incorrect.
  • The NIC is not functional
  • The IP stack has failed to initialize

Frage 11

Frage
Which of the networks in the diagram could use a /29 mask?
Antworten
  • Corporate
  • LA
  • SF
  • NY
  • None

Frage 12

Frage
What network service is the most likely problem if you can ping a computer by IP address but not by name?
Antworten
  • DNS
  • DHCP
  • ARP
  • ICMP

Frage 13

Frage
When you issue the ping command, what protocol are you using?
Antworten
  • DNS
  • DHCP
  • ARP
  • ICMP

Frage 14

Frage
Which of the following commands displays the networks traversed on a path to a network destination?
Antworten
  • ping
  • traceroute
  • pingroute
  • pathroute

Frage 15

Frage
What command generated the output shown below?
Antworten
  • traceroute
  • show ip route
  • ping
  • pathping

Frage 16

Frage
In the work area, match the command to its function on the right.
Antworten
  • __________________________________________________________________________________ | traceroute | Shows you the PC network configuration | __________________________________________________________________________________ | arp -a | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________ | show ip arp | Displays the ARP table on a Cisco router | __________________________________________________________________________________ | ipconfig /all | Displays the list of routers on a path to a network destination | _________________________________________________________________________________
  • __________________________________________________________________________________ | traceroute | Displays the list of routers on a path to a network destination | __________________________________________________________________________________ | arp -a | Shows you the PC network configuration | __________________________________________________________________________________ | show ip arp | Displays the ARP table on a Cisco router | __________________________________________________________________________________ | ipconfig /all | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________
  • __________________________________________________________________________________ | traceroute | Displays the list of routers on a path to a network destination | __________________________________________________________________________________ | arp -a | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________ | show ip arp | Displays the ARP table on a Cisco router | __________________________________________________________________________________ | ipconfig /all | Shows you the PC network configuration | __________________________________________________________________________________
  • __________________________________________________________________________________ | traceroute | Displays the list of routers on a path to a network destination | __________________________________________________________________________________ | arp -a | Displays IP-to-MAC-address mappings on a Windows PC | __________________________________________________________________________________ | show ip arp | Shows you the PC network configuration | __________________________________________________________________________________ | ipconfig /all | Displays the ARP table on a Cisco router | __________________________________________________________________________________

Frage 17

Frage
17. Which of the following network addresses correctly summarizes the three networks shown below efficiently? 10.0.0.0/16 10.1.0.0/16 10.2.0.0/16
Antworten
  • 10.0.0.0/15
  • 10.1.0.0/8
  • 10.0.0.0/14
  • 10.0.0.8/16

Frage 18

Frage
What command displays the ARP table on a Cisco router?
Antworten
  • show ip arp
  • traceroute
  • arp -a
  • tracert

Frage 19

Frage
What switch must be added to the ipconfig command on a PC to verify DNS configuration?
Antworten
  • /dns
  • -dns
  • /all
  • showall

Frage 20

Frage
Which of the following is the best summarization of the following networks: 192.168.128.0through 192.168.159.0?
Antworten
  • 192.168.0.0/24
  • 192.168.128.0/16
  • 192.168.128.0/19
  • 192.168.128.0/20
Zusammenfassung anzeigen Zusammenfassung ausblenden

ähnlicher Inhalt

VL 11 Synapse & Peripheres Nervensystem
jules2004
UML - Diagramme
futurebase
Analytische Geometrie
sonnenblume1997
Online Karteikarten im Klassenraum
Laura Overhoff
Matura Übung Algebra und Geometrie 1
erwin.premstalle
Quiz zum Basiswissen Europa und Europäische Union
lea_seelbach
Deutsche Grammatik A1-A2
Marcus Hartmann
Vetie - Pathologie Fragen aus dem A-Skript
Fioras Hu
Vetie Viro 2013
Laura Sieckmann
Vetie Berufsrecht 2021
Mascha K.