GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Karteikarten

Atomic Spectroscopy

Casey Champion ANALYTICAL BSc Englisch 43 Karten

Atomic absorption orbital diagram

Karten in diesem Stapel (43)

  1. 1MOLECULAR SPEC what energy transition(s) does molecular radiation result fromelectronic transitions
    vibrational transitions
    rotational transitions
  2. 2ATOMIC SPEC what energy transition(s) does atomic radiation result fromelectronic transitions
  3. 3molecular spec spectrumbroad peak
  4. 4atomic spec spectrumsimple line spectra
  5. 5ATOMIC EMISSION SPECTRA basics overviewspectra of narrow lines of a finite width
    lines characteristic of specific elements
  6. 6what could be some causes of interference in atomic emission spectra- molecular emission
    - the flame resulting in a broad emission
  7. 7Atomic absorption orbital diagramAtomic absorption orbital diagram
  8. 8atomic emission orbital diagramatomic emission orbital diagram
  9. 9flow diagram of the components of an atomic emission spectrometer1. nebulization
    2. atomization
    3. excitation
    4. wavelength selector
    5. detector
  10. 10AES - NEBULIZATION overview of nebulizationhigh-velocity stream of gas mixed with a flow of the liquid sample
    FUEL SAMPLE AND OXIDANT
    sample broken up at the tip into fine droplets (aerosol/mist)
  11. 11ATOMIZATION AND EXCITATION what are the two modes of atomization and excitation in AES1. burner (flame)
    2. plasma torch
  12. 12ATOMIZATION AND EXCITATION FLAME PROCESS1. nebulized sample is passed into a flame
    2. PRIMARY COMBUSTION ZONE: desolvation takes place
    3. INTERZONAL REGION: finely divided solid particles are carried up into the inner cone where all particles are vaporized, EXCITATION ALSO TAKES PLACE IN THIS REGION
    4. SECONDARY COMBUSTION ZONE: all material is 'consumed'
  13. 13what is a burner head and what is the significance of ita slit that creates a long path length through the flame
  14. 14what is a flow spoiler and where is it locatedpositioned at the exit of the nebuliser stream in the spray chamber
    - removes large droplets in the aerosol stream
  15. 15ATOMIZATION AND EXCITATION PLASMA TORCH1. aerosol fed in a stream of argon
    2. tangential flow of plasma gas (argon)
    3. coils deliver a radio-frequency power supply to create the plasma
  16. 16how is an inductively coupled plasma formed? (ICP)1. plasma generated when a LARGE VOLTAGE is applied to a NON-CONDUCTING GAS
    2. at sufficient voltage, dielectric (polarizable insulator) gas, breaks down into ions and electrons
    3. RESULTS IN further collisions and formation of a plasma
    4 ONCE FORMED - plasma is capable of absorbing sufficient power from an external source (RF power) to maintain a temperature sufficient to maintain the plasma (more or less) indefinitely
  17. 17what temperature is sufficient to maintain the plasmaaround 10,000 K
  18. 18BURNER advantages and disadvantages+ fuel can change flame temp
    + low cost solution
    - only a small amount of atoms are excited (unexcited atoms exceed the excited atoms by 10^3-10^10) = POOR SENSITIVITY
    - non-atomised molecules interfere
    - emissions from flame interfere
  19. 19PLASMA TORCH advantages and disadvantages+ very stable
    + higher temperatures achieved, increases signal
    + no interference from molecules (cant exist in the plasma)
    + no interference from the flame
    - more complex
    - higher cost
  20. 20whats the origin of the lower detection limit in flame AES compared to ICP AESICP is much more sensitive than flame methods
    Ratio between excited state and non excited state in flame = not very high = inefficient
    WHEREAS plasma is very efficient
    Flame = lots of interfering species (emissions from flame, molecular spec)
  21. 21how are AES systems calibratedcalibration curve made at a controlled temperature - using a set of standard solutions
    I=k[C]
  22. 22why cant the BEER LAMBERT LAW be used for AESAES is an EMISSION METHOD
    BLL used for ABSORPTION
  23. 23what are the three types of broadenening in atomic absorption spec1. natural broadening
    2. pressure broadening
    3. doppler broadening
  24. 24NATURAL BROADENING: how are the absolute widths of atomic spectral lines detemined & equation & info on natural broadeningabsolute widths of atomic spectral lines are determined by the lifetime of the excited state and heisenburgs uncertainty principle
    Δv=(2πτ)^(-1)
    shorter the lifetime = broader the line
  25. 25PRESSURE (COLLISIONAL) BROADENING what is it caused bycollision between atoms and molecules in the gas phase leads to deactivation of excited states = reduced lifetime τ
  26. 26when is PRESSURE (COLLISIONAL) BROADENING observednumber of collisions increase with the concentration of collision partners = broadening of observed lines - MORE PRONOUNCED AT HIGHER TEMPERATURES AND PRESSURE
    -highly dependent on the density of the gaseous medium
  27. 27what is the pressure broadening for na in a normal flame3 x 10^-3 nm
  28. 28DOPPLER BROADENING what is it caused byrapid motion of atoms as they absorb or emit radiation
  29. 29DOPPLER BROADENING explain doppler shift- atoms moving towards the detector emit wavelengths that are slightly shorter
    - atoms moving away from the detector emit wavelengths that are slightly longer
  30. 30how does temperature affect DOPPLER BROADENINGbroadening of observed lines are more pronounced at higher temperatures due to increased velocity of the atoms
    - can limit this effect with cooling
  31. 31whats the range of doppler line widths for Na in a flame4 - 5 x 10^-3 nm
  32. 32whats the impact on the transmission lone when the width of the absorption line is much less than the width of incident radiationradiation in wings is still transmitted even when the absorption is maxed out when the bandwidth incident radiation exceeds that of the absorption linewhats the impact on the transmission lone when the width of the absorption line is much less than the width of incident radiation
  33. 33whats the impacts on transmission when the width of the absorption line is much greater than the width of incident radiationthe radiation is absorbed evenly across the line widthwhats the impacts on transmission when the width of the absorption line is much greater than the width of incident radiation
  34. 34flow diagram of the components of an atomic absorption spectroscopy1. light source
    2. nebulization
    3. atomizer
    4. absorption by sample
    5. wavelength selector
    6. detector
  35. 35FLAME ATOMIC ABSORPTION SPECTROMETRY where does emission occur - temperature info - bandwidth infoemission occurs at the hollow cathode lamp
    lower temperature and pressure
    small bandwidth
  36. 36FLAME ATOMIC ABSORPTION SPECTROMETRY where does absorption occur - temperature info - bandwidth infoabsorption occurs at the burner
    higher temperature and pressure
    large bandwidth
  37. 37ATOMIC ABSORPTION SPECTROMETRY 1. LIGHT SOURCE INFOone light source for each element
    HOLLOW-CATHODE LAMP - line source (opposed to continuum)
  38. 38AAS line source info- sharp, low bandwidth, beam of light
    - obtained from an emission from a specific atom
  39. 39AAS whats the role of the cathode in the hollow-cathode lampthe cathode is a specific element that undergoes atomic emission upon excitation to provide a specific line source of light
  40. 40AAS hollow-cathode lamp HOW MANY LAMPSinstrument has a lamp for each element
    ~70 lamps available
  41. 41AAS how does a hollow-cathode lamp work?1. quartz tube with a low pressure of a noble gas
    2. cathode made of a specific element
    3. voltage applied between the anode and cathode
    4. electrons create ionized (Ar) gas
    5. cathode bombarded by the ions, this excited the source element resulting in an element specific emission
    6. transparent quartz window allows emission out
    LOW TEMPERATURE AND PRESSURE REDUCES LINE BROADENING
  42. 42AAS 4 absorption by sample MONOCHROMATOR role1. absorption source: atomic emission of the target element (narrow line)
    2. absorption occurs across the broad absorption line from λ1 to λ2
    3. monochromator needs only to remove unwanted frequencies
    LOW RESOLUTION, LOW SPECIFICATION NEEDED
  43. 43whats the role of bandwidth in AAS and how does this impact the use of the beer-lambert lawBEER LAMBERT LAW STRICTLY APPLIES TO MONOCHROMATIC RADIATION
    need to integrate response over finite bandwidth
    - if molar absorption coefficient is constant over this range, little problem
    - if molar absorption coefficient varies, can lead to non-linear A vs. Conc graph

Informationen

Beschreibung
BSc ANALYTICAL Karteikarten am Atomic Spectroscopy, erstellt von Casey Champion am 18/01/2023.
Erstellt von
Casey Champion
Aufrufe
2
Bewertung

Mehr zu Atomic Spectroscopy

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck