Industrial Maintenance Third Edition: Ch.5

Description

Electronics And Programmable Logic Controllers
egan773
Flashcards by egan773, updated more than 1 year ago
egan773
Created by egan773 almost 10 years ago
412
0

Resource summary

Question Answer
A(n) ___ device is an electronic component that switches or controls the flow of current in a circuit with no moving parts. Solid state
A(n) ___ board is a thin plate of insulating material, such as fiberglass or phenolic, with conducting paths laminated to one or both sides. Printed Circuit
___ voltage is temporary, undesirable voltage spike, ranging from a few volts to several thousands volts and lasting a few microseconds up to several milliseconds. Transient
A voltage sag is a ___ decreased below the normal rated line voltage. 10%
T or F A PC board must be handled under static-free conditions only. True
T or F The fundamental line frequency it the U.S is 60 Hz True
T or F Diodes are marked or shaped to indicate their anode and cathode. True
A(n)___ is an electrical component that converts AC to DC by allowing voltage and current to move in only one direction. Rectifier
A(n) ___ is a three-terminal semiconductor device that controls current flow depending on the amount of voltage applied to the base. Transistor
A(n) ___ is an electrical switch that is actuated by a separate circuit. Relay
___ current is the small amount of current flowing through a solid-state device when it is not conducting. Linkage
A(n) ___ is a control device that uses a preset time period as a control function. Timer
A(n) ___ is a device that changes DC voltage into AC voltage of any frequency. Convertor
A(n) ___ is a solid-state control device that is programmed and reprogrammed to automatically control an industrial process or machine. PLC
A voltage swell is a ___ increase above the normal rated line voltage. 10%+
A ___ is a material that has little resistance and permits electrons to move through it easily. Conductor
___ -type material is semiconductor material with empty spaces (holes) in its crystalline structure. P
___ -type material is semiconductor material with free electrons in its crystalline structure. N
A(n) ___ is an electronic component that allows current to pass in only one direction. Diode
A(n) ___ rectifier containing four diodes. Bridge
A ___ sensor is a device that reacts to the proximity of a target with out physical contact Proximity
A(n) ___ fault is the malfunction of only a section or several sections of a machine Partial
T or F Computer operations cannot be adversely affected by momentary power interruptions. False
T or F Heat sinks are devices that conduct and dissipate heat away from a component. True
T or F A large percentage of electronic device failures are caused by static electricity discharge. True
T or F A half-wave rectifier is a circuit containing a diode that permits both the positive and negative halves of the AC sine wave to pass Flase
___ current is the minimum current required to keep an SCR conducting Holding
A(n) ___ is a device that combines the effect of a photo-diode and the switching capability of a transistor. Photo-transistor
A ___ is a device that produces electricity when two different metals that are joined together are heated. Thermocouple
Show full summary Hide full summary

Similar

French Intermediate
PrincessLaura
Circulatory System
bridget.watts97
AS Biology Biochemistry and Cell Structure
sian_c_evans
A2 Organic Chemistry - Reactions
yannycollins
Chemistry Keywords
John Appleseed
Electricity
Ursula Brown
AQA GCSE Additional Science - Physics Questions
Michael Priest
Conferences of the Cold War
Alina A
Flame tests
Joshua Rees
CSA (115) ⊙ IITU 2017
Zhandos Ainabek
Pscod new model test#1
Sukesh Angla