Logic Pro X 10.4

Question 1 of 102

1

Where is the inspector and what are it's uses?

Select one of the following:

In the File menu go to Inspector. Its contextual parameters adapt based on what is selected and what has focus.
To the right of the Tracks area. It provides a search field to get to loops and iTunes music.
To the left of the Tracks area. Its contextual parameters adapt based on what is selected and what has focus.
At the top of the window. It provides different tools to allow you to work in the Tracks area.

Explanation

Question 2 of 102

1

Check all that apply concerning the Tracks area:

Select one or more of the following:

It is in the center of the main window.
It contains Track headers to the left.
It contains an EQ fader.
It contains a ruler at the top.
It has a workspace where you edit regions.
It contains a bank of instruments.

Explanation

Question 3 of 102

1

The control bar is the row of buttons and displays at the top of your display. It contains transport buttons, information LCD displays, and mode buttons.

Select one of the following:

True
False

Explanation

Question 4 of 102

1

The workspace is in the Tracks area below the ruler and contains track headers and the regions used in your project.

Select one of the following:

True
False

Explanation

Question 5 of 102

1

When multiple panes are open, how do you make sure the desired pane reacts to key commands?

Select one of the following:

Make sure your key commands are set by adding them in the Key Commands Preferences.
By clicking on the pane so there is a blue outline to bring focus.
Close all panes to make sure you are in the correct pane where you want to work.
Command-F

Explanation

Question 6 of 102

1

What are ways to adjust a numerical value in Logic X? (Check all that apply)

Select one or more of the following:

Slide the pointer vertically.
Command-drag the value.
Double-Click and type the value in the field.

Explanation

Question 7 of 102

1

How do you copy a region? (Check all that apply)

Select one or more of the following:

File>Duplicate Region.
Option-Drag the region.
Select region, then Command C.
Use the Copy tool in the Tools menu.

Explanation

Question 8 of 102

1

A region can be resized by placing the pointer over one of the two lower corners so it changes to a Resize tool, and then drag horizontally.

Select one of the following:

True
False

Explanation

Question 9 of 102

1

How do you loop a region? (Check all that apply)

Select one or more of the following:

L
Select the Loop checkbox in the Inspector.
Move the pointer to the upper right corner of the region and drag.

Explanation

Question 10 of 102

1

Effect plug-ins are added by clicking on the effects button in the Track Header

Select one of the following:

True
False

Explanation

Question 11 of 102

1

In the help tag, what are the units of the 4 numeric values used to determine the length and position of a region?

Select one of the following:

Bars, divisions, ticks, and beats
Minutes, Seconds, milliseconds, ticks.
Bars, beats, divisions, and ticks
Bars, beats, divisions, and frames.

Explanation

Question 12 of 102

1

How many ticks are in a 16th note?

Select one of the following:

100
240
220
280

Explanation

Question 13 of 102

1

What ways are there to mix down your project to a stereo audio file? (Check all that apply)

Select one or more of the following:

File > Bounce > Project or Section.
Option-Command-B
Command-B
File > Export > Project or Section.

Explanation

Question 14 of 102

1

The keyboard shortcut for the Mixer is M.

Select one of the following:

True
False

Explanation

Question 15 of 102

1

The keyboard shortcut for the Loops Browser is O.

Select one of the following:

True
False

Explanation

Question 16 of 102

1

What two fundamental settings affect the quality of a digital audio recording?

Select one of the following:

Sample Rate and EQ.
I/O Buffer Size and Recording Delay.
Sample Rate and Bit Depth.
Surround Format and Enabling 24-bit Recording.

Explanation

Question 17 of 102

1

In Logic, where can you find the sample rate setting?

Select one of the following:

The sample rate is found under Logic Pro X > Project Settings > Audio
The sample rate is found under File > Project Settings > Audio
The sample rate is found under Edit > Sample Rate Settings

Explanation

Question 18 of 102

1

What precaution must you take before record-enabling multiple tracks simultaneously?

Select one of the following:

Make sure cycle mode is on to make take folders.
Make sure the tracks are assigned different inputs.
Make sure the tracks are not muted.
All of the above.

Explanation

Question 19 of 102

1

In Autopunch mode, you can adjust the left and right edge of the autopunch area, in the middle of the ruler, to set the punch-in and punch-out points.

Select one of the following:

True
False

Explanation

Question 20 of 102

1

Which of the statements below are true regarding accessing your metronome and count-in settings?

Select one or more of the following:

Control-click the metronome button.
Click the count-in button.
Record > Count-in
Click the metronome button.

Explanation

Question 21 of 102

1

When you raise the I/O buffer size, the CPU works harder so you can't use more plug-ins, and the roundtrip latency is shorter.

Select one of the following:

True
False

Explanation

Question 22 of 102

1

In the Project Audio Browser, when selecting unused files, what determines whether a file is used or unused?

Select one of the following:

When no regions present in the workspace refer to that file.
When you have copied the file.
When the file is currently playing.

Explanation

Question 23 of 102

1

Nondestructive audio editing alters the audio data in the referenced audio file.

Select one of the following:

True
False

Explanation

Question 24 of 102

1

Where can you perform nondestructive audio editing? (Check all that apply)

Select one or more of the following:

Workspace
Audio Track Editor
Audio File Editor
Piano Roll

Explanation

Question 25 of 102

1

How do you comp takes?

Select one of the following:

Create a new track stack and record each take into a component of the stack. Use the scissors tool and fade tool to comp between edits.
Using the auto punch feature, set the auto punch region and re-record over an area.
Use the quick swipe comp tool to drag over desired sections. The take folder assembles a comp including all the highlighted sections.
Record each track, and then use the track folder feature to comp them all together. Use the marquee and fade tool to smooth out edits.

Explanation

Question 26 of 102

1

How do you prepare to edit the takes inside a take folder?

Select one of the following:

Close the take folder.
From the take folder pop-up menu, select edit.
Click the Quick Swipe Comping button at the top left of the take folder to disable Quick Swipe Comping mode.

Explanation

Question 27 of 102

1

How can you see the result of your comp as regions? (Check all that apply)

Select one or more of the following:

Close the disclosure triangle in the Take Folder
From the Take Folder pop-up menu, choose Flatten
In the Edit Menu, choose Flatten Take Folder
Bounce region in place

Explanation

Question 28 of 102

1

How do you add a fade-in or fade-out to a region or add a crossfade between two regions?

Select one or more of the following:

Drag the Fade tool over the boundaries of a region
Control-Shift-drag the Pointer tool
Adjust the Fade In parameter in the Region Inspector
Select region and use Option-Command-F to get the Fade In/Fade Out handles

Explanation

Question 29 of 102

1

How do you select a section of an audio region?

Select one or more of the following:

Pencil tool.
Text tool.
Highlighter tool.
Marquee tool.

Explanation

Question 30 of 102

1

Which tool allows you to move an individual note inside an audio region, without dividing the region? (Check all that apply)

Select one or more of the following:

Flex Tool
Pointer Tool
Marquee Tool
Scissors Tool

Explanation

Question 31 of 102

1

How do you choose a drummer? (Check all that apply)

Select one or more of the following:

Add a New Drummer track
Open the Library, and in the Drummer section, choose a category and a drummer.
Go to the Library and select a drum kit
Select a new genre from the controls area

Explanation

Question 32 of 102

1

In the Library, click the padlock icon in the Sounds section to lock the drum set while changing drummers.

Select one of the following:

True
False

Explanation

Question 33 of 102

1

You can edit the drummer regions in the Drummer Editor at the bottom of the main window,

Select one of the following:

True
False

Explanation

Question 34 of 102

1

You can mute or unmute drum parts by clicking on parts of the drum in the Drummer editor.

Select one of the following:

True
False

Explanation

Question 35 of 102

1

How do you make the drummer play softer or louder, simpler or more complex?
(Check all that apply)

Select one or more of the following:

Adjust the fills dial
Move the ball around on the XY grid to correspond to the performance style
Mute or unmute drum parts
Choose a drummer Preset

Explanation

Question 36 of 102

1

How do you access the Feel knob, to make the drummer play behind or ahead of the beat?

Select one of the following:

Select the Gear drop down menu and choose Feel knob options
Use the details button in the drummer editor
Control-click on the Swing knob to adjust the feel
Control-click on the Drummer editor to add the Feel knob to the controls

Explanation

Question 37 of 102

1

How do you open Smart Controls? (Check all that apply)

Select one or more of the following:

S
B
C
Use the Smart Controls icon in the Control bar

Explanation

Question 38 of 102

1

How do you open Drum Kit Designer? (Check all that apply)

Select one or more of the following:

Choose a drum kit in the Library
Click the drum icon at the top of the Library
Click the software instrument plug-in slot in the channel strip.
Double click on the drummer

Explanation

Question 39 of 102

1

When customizing a drum kit, you have to select the appropriate Producer Kit in the Library to access all the available drum kit features.

Select one of the following:

True
False

Explanation

Question 40 of 102

1

How do you dampen or tune an individual drum?

Select one of the following:

Click on the drum in the Drummer Editor
Click on the Details button in the Drummer Editor to access the dampen and tune knobs
In the Drum Kit Designer, click a drum and adjust the settings in the Edit panel
Adjust the settings in Smart Controls

Explanation

Question 41 of 102

1

You can convert Drummer regions into MIDI by control-clicking the region and choose Convert > Convert to MIDI Region.

Select one of the following:

True
False

Explanation

Question 42 of 102

1

How do you swap samples in Drum Machine Designer?

Select one of the following:

You cannot swap samples in the Drum Machine Designer.
Click a cell sample you want to swap and choose a new sample in the Library.
Drag a new file onto the cell from your File Browser.

Explanation

Question 43 of 102

1

You can use an audio effect plug-in for an individual cell in Drum Machine Designer by clicking a cell and inserting your plug-in on the right channel strip in the inspector.

Select one of the following:

True
False

Explanation

Question 44 of 102

1

How do you merge a new recording in an existing MIDI region?

Select one of the following:

Choose Record > Overlapping MIDI Recordings > Merge. Which section of Merge depends on whether Cycle mode is on or off.
Choose > MIDI Preferences and enable Merge mode.
Select the Overlapping MIDI button on the Track Header.

Explanation

Question 45 of 102

1

To time-correct a MIDI region, in the Region inspector, set the Quantize parameter to a desired note length.

Select one of the following:

True
False

Explanation

Question 46 of 102

1

How do you choose default region parameters for new MIDI recordings? (Check all that apply)

Select one or more of the following:

Open the Piano roll and adjust the settings
Set the quantize settings in the Library
Default parameters are automatically selected
Deselect all regions in the workspace to access the MIDI Defaults settings in the Region inspector.

Explanation

Question 47 of 102

1

A summing stack will allow MIDI regions on the main track trigger instruments on the subtracks.

Select one of the following:

True
False

Explanation

Question 48 of 102

1

In the Smart Controls pane, how do you map a screen control to a plug-in parameter? (Check all that apply)

Select one or more of the following:

In the Parameter Mapping Area, click Learn.
In the Window menu, select Control Mapping
Click a screen control to select it
Click a plug-in parameter to map it to the selected screen control

Explanation

Question 49 of 102

1

To map a screen control to a knob on your MIDI controller, you can go to the External Assignment area, and click Learn. Click a screen control to select it, and turn a knob on your MIDI controller until the screen control moves along.

Select one or more of the following:

True
False

Explanation

Question 50 of 102

1

To automatically arpeggiate chords, you can insert the Arpeggiator MIDI effect plug-in in the MIDI FX slot of the software instrument channel strip.

Select one of the following:

True
False

Explanation

Question 51 of 102

1

How can you put a track into Live mode? (select all that apply)

Select one or more of the following:

Click the Record-enable button
Send any MIDI event from your MIDI controller
Command - L
Start playback

Explanation

Question 52 of 102

1

How do you create notes in the Piano Roll Editor?

Select one of the following:

Click on the grid
Use the Pencil Tool
Drag on the grid with the Pointer Tool
Drag a note from the Part Box

Explanation

Question 53 of 102

1

You can resize a note in the Piano Roll Editor by choosing a note value in the Library.

Select one of the following:

True
False

Explanation

Question 54 of 102

1

How do you adjust the Velocity of notes in the Piano Roll Editor?

Select one of the following:

Drag notes vertically with the Pencil Tool
Drag notes vertically with the Pointer Tool
Drag notes vertically with the Velocity Tool
Click on a note and type in the value

Explanation

Question 55 of 102

1

In the Piano Roll Editor, how do you view only those lanes occupied by MIDI notes?

Select one of the following:

Zoom sliders
View > Lanes Occupied
Click the Collapse button
Command - Z

Explanation

Question 56 of 102

1

To quickly paint multiple notes of the same length, you can drag the Brush tool

Select one of the following:

True
False

Explanation

Question 57 of 102

1

How do you create a crescendo using note velocities?

Select one of the following:

In the Score Editor, use the Velocity Tool and draw a line across the notes
In the Automation Parameter pop-up menu, ensure that Note Velocity is chosen, and draw a line in the Automation lane.
In the MIDI Draw area, choose the Velocity Tool, and draw a line
In the MIDI draw inspector, ensure that Pitch is chosen, and draw a line in the Piano Roll

Explanation

Question 58 of 102

1

How do you create MIDI control data? (select all that apply)

Select one or more of the following:

Click to create the first point.
Double click with Pointer tool
Double- click away from the automation line, to create a new point.
Use the Pencil tool for more complex automation

Explanation

Question 59 of 102

1

In the Automation lane, you can make a straight line curve by holding down Control-Shift and dragging between two points.

Select one of the following:

True
False

Explanation

Question 60 of 102

1

You can copy a section of automation in the Automation lane by selecting the control points, and Option-drag the selection.

Select one of the following:

True
False

Explanation

Question 61 of 102

1

If you place the pointer over a note, after a pause, a help tag appears with the pitch and velocity of the note.

Select one of the following:

True
False

Explanation

Question 62 of 102

1

How can you check the position, length, and pitch of a note in the Piano Roll?

Select one of the following:

Double-click the note
Control-click the note
Click and hold the note
Delete the note

Explanation

Question 63 of 102

1

Which picture displays how you would adapt the project tempo to the tempo of an audio file that you import?

Select one of the following:

Explanation

Question 64 of 102

1

How do you create an Apple Loop that follows the project tempo?

Select one of the following:

Bounce a section of a region and import it into the Loops area
Drag any region to the Loops area
Drag a region to the Loop Browser that is a whole integer in length
Control-click on a region and choose Add to Loop Browser

Explanation

Question 65 of 102

1

How do you add tempo changes and curves?

Select one of the following:

In the Tracks Inspector, use quantization to set the tempo at any given marker point. Use the Fade-In/Out tool to set the curve.
In the Global Tracks, on the Tempo track, create and adjust tempo points.
Show the Automation lines, choose Tempo in the pop up menu, and draw curves and control points using one of the automation modes

Explanation

Question 66 of 102

1

You can apply a tape or turntable speed-up or slow-down effect by adding a fade-in or fade-out, Ctrl-clicking it, and from the shortcut menu choosing speed up or slow down.

Select one of the following:

True
False

Explanation

Question 67 of 102

1

How do you make one track follow the groove of another? (Check all that apply)

Select one or more of the following:

Configure the track headers to show groove tracks
Enable Flex Mode and choose Rhythmic
Select the Match Groove Track checkbox in the other track(s)
Click over the track number to set the groove track (gold star)
Quantize the region in the Region inspector

Explanation

Question 68 of 102

1

How do you turn on Flex editing? (Check all that apply)

Select one or more of the following:

F
Use the Flex button in the Tracks area menu bar and enable the Flex button on the desired track
Command-F
Choose a flex mode for the selected track in the Track Inspector

Explanation

Question 69 of 102

1

Assuming there are no pre-existing flex markers in the region, you can time stretch an audio region using the region's start and end points as boundaries by dragging the Flex Tool on the lower half of the waveform.

Select one of the following:

True
False

Explanation

Question 70 of 102

1

How do you time stretch an audio region using the previous and next transient marker as boundaries?

Select one of the following:

Drag the Flex tool on the upper half of the waveform
Drag the Flex tool on the lower half of the waveform
Drag the Pointer tool on the lower half of the waveform
Drag the Pointer tool on the upper half of the waveform

Explanation

Question 71 of 102

1

Using Flex Pitch, where can you edit the pitch of notes inside an audio region? (Check all that apply)

Select one or more of the following:

Workspace
Audio File Editor
Audio Track Editor
Piano Roll

Explanation

Question 72 of 102

1

When Flex Pitch is turned on for a track, how do you quickly tune and entire audio region?

Select one of the following:

Select the audio region, rubber band the notes and drag to correct pitch
Select the audio region, and in the Region inspector, "set all to perfect pitch"
Select the audio region, Ctrl-click and "set all to perfect pitch" from the shortcut menu
Select the audio region in the Audio Tracks Editor and move all pitches by dragging to perfect pitch

Explanation

Question 73 of 102

1

How can you edit the pitch curve?

Select one of the following:

Drag using the Flex tool in the Workspace
Using Flex Pitch editing in the Audio Tracks Editor, drag the 6 hotspots around a note beam
Control-Click-drag on a note and adjust it's curve
Using the Flex tool in the Audio Tracks Editor, Command-Option-drag around a note beam

Explanation

Question 74 of 102

1

How do you use Solo mode? (Check all that apply)

Select one or more of the following:

Select the regions you want to solo and use Control-S
Select the regions you want to solo and drag the Solo tool.
Select the regions you want to solo and use Command - S.
Select the regions you want to solo, and in the control bar, click the Solo button

Explanation

Question 75 of 102

1

To add a marker, place the playhead where you want to place the marker. Go to Navigate > Create Marker.

Select one of the following:

True
False

Explanation

Question 76 of 102

1

How do you pack regions into a folder?

Select one of the following:

Select the regions and use the Glue tool
Select the regions and go to Functions > Merge > Pack Folder
Select the regions and go to Functions-> Folder-> Pack Folder
Select the Regions and use Command-P

Explanation

Question 77 of 102

1

Use the disclosure triangle to open and close a folder.

Select one of the following:

True
False

Explanation

Question 78 of 102

1

To insert a new section into a project, adjust the cycle region to desired length and use Edit-> Cut/Insert Time-> Swap Left and Right Locators

Select one of the following:

True
False

Explanation

Question 79 of 102

1

How do you skip a section when playing a project?

Select one of the following:

Use a skip cycle by dragging left on the cycle area
Use a skip cycle by Ctrl-clicking the cycle area, and from the shortcut menu choose "Swap Left and Right Locator."
Add a marker and hide the regions below it by Control-clicking on the marker and selecting Hide

Explanation

Question 80 of 102

1

How can you remove background noise between performances on a track?

Select one of the following:

Use a High Pass filter on the Graphic Equalizer
Use a Compressor
Use Strip Silence and set the threshold
Use a Low Pass filter on the Graphic Equalizer

Explanation

Question 81 of 102

1

When Cycle mode is enabled, you can click a track header to select all the regions between the locators on that track, to quickly select many small regions on the same track.

Select one of the following:

True
False

Explanation

Question 82 of 102

1

How do you drag a region while ensuring that it retains its position relative to the bar lines?

Select one of the following:

In the Snap pop-up menu, make sure "Snap Regions to Relative Values" is selected and choose Smart.
In the Snap pop-up menu, make sure "Snap Regions to Relative Values" is selected and choose Bar.
In the Snap pop-up menu, make sure "Snap Regions to Relative Values" is selected and choose Tick.
In the Snap pop-up menu, make sure "Snap Regions to Relative Values" is selected and choose Measure.

Explanation

Question 83 of 102

1

To quickly solo or mute multiple tracks in the Tracks area, press Option, and drag up or down over the Solo or Mute button on a track header.

Select one of the following:

True
False

Explanation

Question 84 of 102

1

Identify the 4 main instrumental sound components you can adjust to give each instrument its place in the mix. (Check all that apply)

Select one or more of the following:

Volume Level
Pan Position
Frequency Spectrum
Compression
Distance
Delays

Explanation

Question 85 of 102

1

You use a bus send to route some of the signal from a channel strip to an aux channel strip, usually to be processed by plug-ins.

Select one of the following:

True
False

Explanation

Question 86 of 102

1

How can you make a group of tracks appear as one track in the Tracks area without changing its audio routing?

Select one of the following:

Use groups on the selected tracks' channel strips
Select the tracks and choose Track-> Create a Track Stack, and choose folder stack
Select the tracks and choose Track-> Create a Track Stack, and choose summing stack

Explanation

Question 87 of 102

1

How can you submix a group of tracks, for example, to process the submix with audio effect plug-ins?

Select one of the following:

Use groups on the selected tracks' channel strips
Select the tracks and choose Track-> Create a Track Stack, and choose folder stack
Select the tracks and choose Track-> Create a Track Stack, and choose summing stack

Explanation

Question 88 of 102

1

A compressor attenuates the level of a signal after that signal goes over a certain threshold, giving the signal a more consistent level.

Select one of the following:

True
False

Explanation

Question 89 of 102

1

What does a limiter do?

Select one or more of the following:

It attenuates the level of a signal after that signal goes over a certain threshold, giving the signal a more consistent level.
It works in a similar fashion to a compressor, but it makes sure that the signal is attenuated so it never goes over a specific output ceiling.
The limiter works with the compressor to make all sound levels equal.

Explanation

Question 90 of 102

1

In the inspector, how can you choose which channel strip is displayed in the right channel strip?

Select one of the following:

Control-click the track header and select 'Display right channel strip.'
Go to View > Channel Strip > Display right channel strip
On the left channel strip, click any Send slot or the Output slot to display the corresponding channel strip on the right.

Explanation

Question 91 of 102

1

How do you change the mono or stereo format of the input of a channel strip?

Select one of the following:

Click the Format button in the Input slot.
Control-click the Pan knob.
Go to Mix > Mono or stereo
Click the Output slot.

Explanation

Question 92 of 102

1

You can toggle the soloed state of currently soloed tracks by clicking the Solo Kill/Recall button at the top of the track headers.

Select one of the following:

True
False

Explanation

Question 93 of 102

1

How can you set up Logic to use Command-Z to undo plug-in parameter changes?

Select one of the following:

In a plug-in window, from the Settings pop-up menu, choose Include Plug-In Undo Steps in Project Undo History.
Command-Z cannot be used to undo plug-in parameter changes.
In the Inspector, click on the pop-up menu in the plug-in slot, and choose Include Plug-In Undo Steps in Project Undo History.

Explanation

Question 94 of 102

1

You can create a control point on the automation curve by clicking on the automation curve.

Select one of the following:

True
False

Explanation

Question 95 of 102

1

How can you create a control point away from the automation curve?

Select one of the following:

Option-click away from the line.
Control-Shift-drag away from the line.
Double-click away from the line.
Drag the point off the line.

Explanation

Question 96 of 102

1

How can you quickly adjust the value of a parameter for a given section of a track?

Select one of the following:

Use the Trim tool to select the desired section, and drag the selected automation curve up or down.
Use the Flex tool to select the desired section, and drag the selected automation curve up or down.
Use the Pointer tool to select the desired section, and drag the selected automation curve up or down.
Use the Marquee tool to select the desired section, and drag the selected automation curve up or down.

Explanation

Question 97 of 102

1

You can trim an automation curve by placing the mouse pointer on the numerical display in the track header and drag vertically.

Select one of the following:

True
False

Explanation

Question 98 of 102

1

How can you create automation control points that snap to the grid?

Select one of the following:

From the Snap pop-up menu, choose Snap Automation.
From the Automation pop-up menu, choose Snap Automation.
From the Snap pop-up menu, choose Smart.

Explanation

Question 99 of 102

1

In both Touch and Latch mode, when you release the mouse button, the parameter returns to the previous value on the automation curve.

Select one of the following:

True
False

Explanation

Question 100 of 102

1

How can you view multiple automation curves on the same track? (Select all that apply)

Select one or more of the following:

Click the Folder button in track header to show an additional subtrack.
Click the disclosure triangle in the track header to show an additional subtrack.
Click the - (minus sign) in the subtrack to create another subtrack.
Click the + (plus sign) in the subtrack to create another subtrack.

Explanation

Question 101 of 102

1

How do you assign a controller knob to Automation Quick Access?

Select one or more of the following:

Click Assign, and turn the knob of your choice up and down to assign it.
An alert asks you to assign a controller knob.
Enable Automation Quick Access with Command-A.
In the Automation preferences, turn on Automation Quick Access.

Explanation

Question 102 of 102

1

Automation Quick Access always controls the parameter displayed in the Automation Parameter pop-up menu on the selected track header.

Select one of the following:

True
False

	Created by Chris Redding over 9 years ago

	Copied by Sandi Hagood about 5 years ago

Questions to familiarize yourself with the Apple Logic Pro X certification exam.

Logic Pro X 10.4

Question 1 of 102

Where is the inspector and what are it's uses?

Select one of the following:

Explanation

Question 2 of 102

Check all that apply concerning the Tracks area:

Select one or more of the following:

Explanation

Question 3 of 102

The control bar is the row of buttons and displays at the top of your display. It contains transport buttons, information LCD displays, and mode buttons.

Select one of the following:

Explanation

Question 4 of 102

The workspace is in the Tracks area below the ruler and contains track headers and the regions used in your project.

Select one of the following:

Explanation

Question 5 of 102

When multiple panes are open, how do you make sure the desired pane reacts to key commands?

Select one of the following:

Explanation

Question 6 of 102

What are ways to adjust a numerical value in Logic X? (Check all that apply)

Select one or more of the following:

Explanation

Question 7 of 102

How do you copy a region? (Check all that apply)

Select one or more of the following:

Explanation

Question 8 of 102

A region can be resized by placing the pointer over one of the two lower corners so it changes to a Resize tool, and then drag horizontally.

Select one of the following:

Explanation

Question 9 of 102

How do you loop a region? (Check all that apply)

Select one or more of the following:

Explanation

Question 10 of 102

Effect plug-ins are added by clicking on the effects button in the Track Header

Select one of the following:

Explanation

Question 11 of 102

In the help tag, what are the units of the 4 numeric values used to determine the length and position of a region?

Select one of the following:

Explanation

Question 12 of 102

How many ticks are in a 16th note?

Select one of the following:

Explanation

Question 13 of 102

What ways are there to mix down your project to a stereo audio file? (Check all that apply)

Select one or more of the following:

Explanation

Question 14 of 102

The keyboard shortcut for the Mixer is M.

Select one of the following:

Explanation

Question 15 of 102

The keyboard shortcut for the Loops Browser is O.

Select one of the following:

Explanation

Question 16 of 102

What two fundamental settings affect the quality of a digital audio recording?

Select one of the following:

Explanation

Question 17 of 102

In Logic, where can you find the sample rate setting?

Select one of the following:

Explanation

Question 18 of 102

What precaution must you take before record-enabling multiple tracks simultaneously?

Select one of the following:

Explanation

Question 19 of 102

In Autopunch mode, you can adjust the left and right edge of the autopunch area, in the middle of the ruler, to set the punch-in and punch-out points.

Select one of the following:

Explanation

Question 20 of 102

Which of the statements below are true regarding accessing your metronome and count-in settings?

How do you make the drummer play softer or louder, simpler or more complex?
(Check all that apply)