Windows Server 2016 70-740 - Simulado IV

Question 1

Question #1

Your network contains an Active Directory domain.
The domain contains two Hyper-V hosts.
You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos.
What should you do first?

Accepted Answer

From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.

Answer

From Server Manager, install the Host Guardian Service server role on a domain controller.

Answer

From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.

Answer

From Server Manager, install the Host Guardian Service server role on both servers.

Question 2

Question #2

A company named Contoso, Ltd has five Hyper-V hosts that are configured as shown In the following table.

What are two valid live migration scenarios for virtual machines in your environment? Each correct answer presents a complete solution.

Accepted Answer

from Server1 to Server5

Accepted Answer

from Server2 to Server3

Answer

from Server4 to Server5

Answer

from Server3 to Server4

Question 3

Question #3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it.
As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2.
Does this meet the goal?

Answer

true

Question 4

Question #4

You have Nano Server image named Diskl .vhdx.
You mount Diskl .vhdx.
You need to add a folder that contains several files to the image.
Which tool or cmdlet you should use?

Accepted Answer

Copy-Item

Answer

Add-WindowsImage

Answer

Add-WindowsPackage

Answer

Edit-NanoServerImage

Answer

Dism

Answer

Nano Server Image Builder

Question 5

Question #5

Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server
2016.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E:. The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem EXFat and Enable-DeDupVolume -Volume D:,E:.
Does this meet the goal?

Answer

true

Question 6

Question #6

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From a command prompt, you run netdom query fsmo.
Does this meet the goal?

Answer

true

Question 7

Question #7

You have two servers named Server1 and Server2.
A firewall exists between Server1 and Server2.
Both servers run Windows Server Update Services (WSUS).
Server1 downloads updates from Microsoft update.
Server2 must synchronize updates from Server1.
Which port should to open on the firewall?

Accepted Answer

8530

Answer

80

Answer

443

Answer

3389

Question 8

Question #8

You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

Accepted Answer

New-NetQosPolicy

Answer

Set-NetworkController

Answer

New-NetTransportFilter

Answer

New-StorageQosPolicy

Answer

Set-NetTCPSetting

Answer

Set-NetUDPSetting

Question 9

Question #9

You have a server named Server1 that runs Windows Server 2016.
You need to configure Server1 as a Web Application Proxy.
Which server role or role service should you install on Server1?

Accepted Answer

Remote Access

Answer

Web Server (IIS)

Answer

Network Policy and Access Services

Answer

Direct Access and VPN (RAS)

Answer

Active Directory Federation Services

Question 10

Question #10

Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server
2016.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E:.
The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Enable-DeDupVolume-Volume D:,E:.
Does this meet the goal?

Answer

true

Question 11

Question #11

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

Answer

true

Question 12

Question #12

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 is in a workgroup. VM1 is currently in a running state.
You need to create 10 copies of VM1 on Server1 in the least amount of time possible.
Which cmdlets should you use?

Accepted Answer

Export-VM, and then Import-VM

Answer

Stop-VM, and then Import-VM

Answer

Checkpoint-VM, and then New-VM

Answer

Copy-VMFile, and then New-VM

Question 13

Question #13

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016.
Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1.
You have the virtual machines shown in the following table.

All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?

Accepted Answer

Configure network virtualization for VM1 and VM2.

Answer

On Server2, configure the VLAN ID setting of Switch1.

Answer

On Server2, create an external switch and connect VM3 to the switch.

Answer

Modify the subnet mask of VM1 and VM2.

Question 14

Question #14

DRAG DROP -
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server 1 hosts a virtual machine named VM1 that runs Windows Server 2016.
Server1 has a USB 3.0 device attached to a PCI Express (PCIe) bus.
You need to provide VM1 with pass-through access to the USB 3.0 device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Question 15

Question #15

HOTSPOT -
You deploy a new Hyper-V host named Server1 that runs Windows Server 2016.
You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity.
On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows log files for all of the servers on the network.
VM1 has four virtual processors.
You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.
Hot Area:

Question 16

Question #16

DRAG DROP -

You are preparing an image of Windows Server 2016.
The image is missing the driver for a network adapter that is required in your environment.
You need to ensure that the image contains the network adapter driver.
Which three cmdlets should you use in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them m the correct order.
Select and Place:

Question 17

Question #17

HOTSPOT -

You have a server named Server1 that runs Windows Server 2016.
Server1 is a Hyper-V host.
You run the commands shown in the following graphic:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Hot Area:

Accepted Answer

two

Accepted Answer

three

Question 18

Question #18

DRAG DROP -

You have a server named Server1 that runs Windows Server 2016.
On Server1 you use the Basic template to create a new Data Collector Set named CollectorSet1.
You need to configure data collection for the performance counters.
The configuration must support the following requirements:
✑ Data collection must run on a schedule.
✑ Data collection must stop if there is less than 1 GB of free disk space.
What should you modify to meet each requirement? To answer, drag the appropriate settings to the correct requirements. Each setting may be used once, more than once, or nor at all. You may need to drag the Split bar between panes or scroll to view content.
Select and Place:

Question 19

Question #19

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
You plan to use Windows Server Backup to back up all of the data on Server1.
You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target.
The backup target must support incremental backups.
Solution: You mount the volume to C:\Backup, and you format the volume by using exFAT.
Does this meet the goal?

Answer

true

Question 20

Question #20

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
You plan to use Windows Server Backup to back up all of the data on Server1.
You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target.
The backup target must support incremental backups.
Solution: You mount the volume to C:\Backup, and you format the volume by using FAT32.
Does this meet the goal?

Answer

true

Question 21

Question #21

In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you determine whether the solution meets the stated goals. More than one solution might solve the problem. It is also possible that none of the solutions solve the problem.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server
2016.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume E: -FileSystem ReFS and Enable-DeDupVolume -Volume D:,E:.
Does this meet the goal?

Answer

true

Question 22

Question #22

HOTSPOT -

You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.
Hot Area:

Question 23

Question #23

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Exchange Server 2016 organization.
Some users access the mailbox on their mobile device by using Exchange ActiveSync.
You need to prevent the users from synchronizing more than one month of email or calendar data to their device.
Solution: You deploy an Allow/Block/Quarantine policy.
Does this meet the goal?

Answer

true

Question 24

Question #24

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com.
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2016 source files are located in drive D.
Solution: You run the following cmdlet.

New-NanoServerImage -Edition Datacenter -deploymentType Host -defender EnableEMS - MediaPatch 'D:\' -TargetPath c:\Nano1\Nano1.wim -ComputerName Nano1 - Domain Contoso.com

Does this meet the goal?

Answer

true

Question 25

Question #25

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.

You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
Solution: On Host1 and Host2, you create a private switch named Priv1, and then you connect VM1 to Priv1.
Does meet the goal?

Answer

true

Question 26

Question #176Topic 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.

You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
Solution: You move Host2 to the contoso.com domain.
Does meet the goal?

Answer

true

Question 27

Question #27

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.

You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
Solution: You shut down VM1, configure the processor compatibility settings, and then start VM1.
Does meet the goal?

Answer

true

Question 28

Question #28

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
You plan to use Windows Server Backup to back up all of the data on Server1.
You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target.
The backup target must support incremental backups.
Solution: You assign a drive letter to the volume, and you format the volume by using exFAT.
Does this meet the goal?

Answer

true

Question 29

Question #29

DRAG DROP -

You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role installed and hosts a virtual machine named VM1.
Server1 has an NVMe storage device. Currently, the device is assigned to VM1 through a Discrete Device Assignment.
You need to make the storage device available to Server1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Accepted Answer

Stop VM1

Accepted Answer

Run the Remove-VMAssignableDevice cmdlet

Accepted Answer

Run the Mount-VMHostAssignableDevice cmd

Accepted Answer

Enable the device in Device Manager

Question 30

Question #180Topic 1
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 hosts four virtual machines that are members of the domain. The virtual machines are configured as shown in the following table.

Which virtual machines can you manage by using PowerShell Direct?

Accepted Answer

VM1, VM2, and VM4

Answer

VM1, VM2, and VM3

Answer

only VM2

Answer

only VM4

Question 31

Question #31

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The hosts are nodes in failover cluster.
A highly available virtual machine named VM1 is running on Server1.
You need to move VM1 to Server2 while minimizing downtime.
What should you do?

Accepted Answer

From Windows PowerShell, run Move-ClusterGroup

Answer

From Hyper-V Manager, use the Move action.

Answer

From Failover Cluster Manager, use the Move Virtual Machine Storage option.

Answer

From Windows PowerShell, run Move-VM.

Question 32

Question #32

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 hosts a virtual machine named VM1 that is in a Running state.
On Server1, you export VM1 and then you import VM1 on Server2.
What is the current state of VM1 on Server2?

Accepted Answer

Saved

Answer

Paused

Answer

off

Answer

Running

Question 33

Question #33

You have a file server named Server1 that runs Windows Server 2016.
Object access auditing is configured on Server1.
You need to filter the Security event log to show all log entries that relate to a user named User1.
What should you do?

Accepted Answer

Right-click the Security log, and then click Filter Current Log"¦ On the Filter tab, type a value in the User box.

Answer

Right-click the Security log, and then click Filter Current Log"¦ On the Filter tab, select a value from the Event sources box.

Answer

Right-click the Security log, and then click Create Custom View"¦ On the Filter tab, type a value in the User box.

Answer

Right-click the Security log, and then click Filter Current Log"¦ On the XML tab, modify the QueryList entry and set an EventData tag.

Question 34

Question #34

HOTSPOT -
You have a server named Server1 that runs Windows Server 2016.
On Server1, you have a custom image of Windows Server 2016 Standard in a file named Image1.wim. The image is mounted to C:\Folder1.
You discover corrupted files in the WinSxS folder of the mounted image.
From the Windows Server 2016 installation media, you mount an image of Windows Server 2016 Standard from Install.wim to C:\Folder2.
You need to repair the corrupted image.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Accepted Answer

Dism /Image:C:\offline/Cleanup-Image/RestoreHealth/Source:c:\Folder2\windows

Answer

Dism /Image:C:\offline/Cleanup-Image/ScanHealth/Source:c:\Folder2\install.wim:1

Answer

Dism /Image:C:\offline/Cleanup-Image/StartComponentCleanup/Source:c:\Folder1\image1.wim

Answer

Dism /Image:C:\offline/Cleanup-Image/CheckIntegrity/Source:c:\Folder1

Answer

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\Folder1\install.wim:1

Question 35

Question #35

DRAG DROP -
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 runs Windows Server 2016. VM1 uses a VHD for storage.
The disk configuration of VM1 is shown in the exhibit. (Click the Exhibit button.)

You need to increase the size of volume D to 400 GB.
Which cmdlets should you run on Server1 and VM1? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Accepted Answer

Resize-VHD, Resize-Partition

Answer

Set-VHD, Set-Volume

Answer

Resize-VirtualDisk, Resize-Partition

Answer

Resize-VHD, Set-VHD

Answer

Set-VHD, Resize-Partition

Question 36

Question #36

HOTSPOT -
You have a server named Server1 that runs Windows Server 2016.
On Server1, you plan to create a new volume named Volume1. Volume1 will contain image files.
You need to identify which file system and which cluster size to configure for Volume1. The solution must ensure that the image files will be compressed by using file system compression.
Which file system and cluster size should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Accepted Answer

NTFS, 4K

Answer

exFAT, 64K

Answer

FAT32, 8K

Answer

ReFS, 4K

Question 37

Question #37

You have a server named Server1 that runs Windows Server 2016.

The server has an application named App1. App1 writes entries to the Application event log when errors are encountered. The events have IDs of either 111 or 112.

You need to restart the service whenever either of these events is logged.
What should you do?

Accepted Answer

From Task Scheduler, use Create Task to create one task that includes triggers for both event IDs.

Answer

From Windows PowerShell, run the Get-SMServerEvent cmdlet and pipe the output to the Start-NetEventSession cmdlet

Answer

From Event Viewer, create a subscription that has a filter for the event IDs.

Answer

From Windows PowerShell, run the Get-Event cmdlet and pipe the output to the Start-NetEventSession cmdlet.

Answer

From Performance Monitor, add an Event Trace Session data collector that uses the Microsoft-Windows-Eventlog provider.

Answer

From Event Viewer, create a custom that has a filter for the event IDs. parameter.

Question 38

Question #38

HOTSPOT -
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual disk file named Disk1.vhdx that contains an installation of
Windows Server 2016.
You create a virtual disk file named Disk2.vhdx that is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Hot Area:

Accepted Answer

Set-VHD, Mount-VHD

Answer

Merge-VHD, Optimize-VHD

Answer

Optimize-VHDSet, Resize-VHD

Answer

Test-VHD, Optimize-VHDSet

Answer

Set-VHD, Optimize-VHDSet

Question 39

Question #39

HOTSPOT -
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 hosts two containers named Container1 and Container2.
The servers and the containers are configured as shown in the following table.

Container1 hosts a website on port 8080.
You create a port mapping between port 8080 on Container1 and port 80 on Server1.
Which URL can you use to access the website from Server1, Server2, and Container2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Question 40

Question #40

HOTSPOT -
You have a Windows Server 2016 failover cluster named Cluster1.
You need to implement Cloud Witness for Cluster 1.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Question 41

Question #41

HOTSPOT -
Your network contains an Active Directory domain named contoso.com. The domain contains three clusters named FC1, FC2, and FC3.
The domain contains servers that run Windows Server 2016. The servers are configured as shown in the following table.

Server1 hosts a highly available virtual machine named VM1.
You are creating a maintenance plan for the servers, and you are evaluating how to move VM1 to the different clusters.
You need to identify the fastest method to move VM1 to FC2 and FC3.
Which method should you identify for each cluster? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Accepted Answer

Live migration
Export and import

Answer

Live migration
Quick Migration

Answer

Export and import
Live migration

Answer

Quick Migration
Live migration

Answer

Quick Migration
Export and import

Question 42

Question #42

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has ab external virtual switch named Switch1. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 has one network adapter. The network adapter connects to Switch1.
You need to limit the maximum network bandwidth available to VM1 to 100 Mbps. The solution must limit the bandwidth for VM1 only.
Which cmdlet should you run?

Accepted Answer

Set-VMNetworkAdapter

Answer

Set-NetAdapter

Answer

Set-VM

Answer

Set-NetAdapterVmq

Answer

Set-NetworkSwitchPortProperty

Question 43

Question #43

You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
The Cluster Service on Server1 fails.
You need to identify the cause of the failure.
What should you do?

Accepted Answer

From Windows PowerShell, run the Get-ClusterLog cmdlet.

Answer

From Windows PowerShell, run the Get-ClusterNode cmdlet.

Answer

From Event Viewer, review the Application event log.

Answer

From Event Viewer, review the System event log.

Question 44

Question #44

You have a server named Server1 that is an iSCSI target. You have a server named Server2 that runs Windows Server 2016. Server2 has an iSCSI disk named
Disk1 that is hosted on Server1. Disk1 contains one volume that is assigned a drive letter of E.
You need to increase the size of Disk1.
What should you do?

Accepted Answer

Run the Resize-IscsiVirtualDisk cmdlet and specify the -ComputerName Server1 parameter.

Answer

Run the Resize-IscsiVirtualDisk cmdlet and specify the -ComputerName Server2 parameter.

Answer

Run the Resize-Partition cmdlet and specify the -ComputerName Server1 parameter.

Answer

Run the Resize- Partition cmdlet and specify the -ComputerName Server2 parameter.

Question 45

Question #45

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server
2016.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem NTFS and Enable-DeDupVolume -Volume D:,E:.
Does this meet the goal?

Answer

true

Question 46

Question #46

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You enable the Guest services integration service for VM1.
Does this meet the goal?

Answer

true

Question 47

Question #47

HOTSPOT -
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.
Server1 and Server2 are nodes in a failover cluster named FC1. Server3 and Server4 are nodes in a failover cluster named FC2.
You add the cluster roles shown in the following table.

You add a file share named Share1 to FS1. You add a file share named Share2 to FS2.
Which UNC paths can you use to access each share? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Question 48

Question #48

You have a server named Server1 that runs Windows Server 2016.
Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1.
You need to extend Partition1.
What should you do first?

Accepted Answer

From Windows PowerShell, run the Resize-StorageTier cmdlet.

Answer

From Windows PowerShell, run the Resize-Partition cmdlet.

Answer

From Disk Management, modify the properties of Partition1.

Answer

From the Storage Pools page in Server Manager, extend a virtual disk.

Answer

From Disk Management, extend a volume.

Answer

From Windows PowerShell, run the Resize-VHD cmdlet.

Answer

From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.

Question 49

Question #49

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1.
You need to provide VM1 with direct access to a graphics processing unit (GPU) on Server1.
What should you do first?

Accepted Answer

Disable the display adapter device on Server1.

Answer

On VM1, install the Quality Windows Audio Video Experience (qWave) feature.

Answer

Dismount the display adapter on Server1.

Answer

In the settings of VM1, add a RemoteFX 3D Video Adapter.

Question 50

Question #50

HOTSPOT -
You deploy a new Hyper-V host named Server1 that runs Windows Server 2016.
You implement receive side scaling (RSS) on Server1. The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity.
On Server1, you deploy a virtual machine named VM1. You configure VM1 to aggregate all of the Windows and non-Windows log files for all of the servers on the network. VM1 has four virtual processors.
You discover that VM1 drops packets.
You monitor the network, and you discover that the network capacity is sufficient for the monitoring traffic.
You monitor the performance of VM1, and you discover that one processor is consistently at 100 percent utilization, while the other processors are barely in use.
You need to resolve the performance issue.
What should you do? To answer, select the appropriate options in the answer area.
Hot Area:

Windows Server 2016 70-740 - Simulado IV

Preguntas del test (50)

Información

Escríbenos

¿Qué te parece el nuevo diseño?