Pregunta 1
Pregunta
What is the background in the image below?
Respuesta
-
Stone.
-
Concrete.
-
Composite.
-
Pre-plastered.
Pregunta 2
Pregunta
What is the background in the image ?
Respuesta
-
Brick.
-
Block.
-
Composite.
-
Concrete.
Pregunta 3
Pregunta
Which one of the following backgrounds is plasterboard screwed to?
Respuesta
-
Timber studs.
-
External wall.
-
Uneven surface.
-
Lime plastered.
Pregunta 4
Pregunta
When removing old plaster from a wall, the tools used are a hammer and a.
Respuesta
-
bolster chisel
-
scraper blade
-
crowbar
-
shovel.
Pregunta 5
Pregunta
The mechanical tool used to remove existing plaster from an external wall is called a
Respuesta
-
needle gun
-
cordless drill
-
breaker
-
core drill.
Pregunta 6
Pregunta
After stripping plaster from a wall, the operative should brush the background to remove
Respuesta
-
dust
-
laitance
-
adhesive
-
fixings.
Pregunta 7
Pregunta
To ensure a good bond between the background and the plaster, it is important to
Respuesta
-
keep area tidy
-
control suction
-
use clean equipment
-
speed up drying time.
Pregunta 8
Pregunta
Which one of the following improves adhesion?
Respuesta
-
Slurry.
-
Water.
-
Adhesive scrim.
-
Dubbing out.
Pregunta 9
Pregunta
If a high suction background is not prepared properly, what is likely to happen to the
plaster?
Respuesta
-
Slow set.
-
Sagging.
-
Crazing.
-
Will not set.
Pregunta 10
Pregunta
Which of the following is true about good housekeeping?
Respuesta
-
It wastes money.
-
It reduces labour.
-
It reduces progress.
-
It prevents hazards.
Pregunta 11
Pregunta
The aggregate in a scratch coat mix is
Respuesta
-
Lime
-
Sand
-
Cement
-
Additive
Pregunta 12
Pregunta
The correct mixing methods of plaster materials should be found in the
Pregunta 13
Pregunta
The most important considerations for setting up a designated mixing area are
Respuesta
-
location of water and power supply
-
storage of materials and PPE
-
location of tools and equipment
-
protecting the work and surrounding area.
Pregunta 14
Pregunta
What is the equipment in the image?
Respuesta
-
Mechanical whisk.
-
Mixing wheel.
-
Gauger.
-
Staff.
Pregunta 15
Pregunta
What should be used to cover and protect the working and surrounding area when
mixing plaster materials?
Respuesta
-
Plasterboard.
-
Barriers.
-
Insulation sheets.
-
Dust sheets.
Pregunta 16
Pregunta
When mixing lime, sand and cement, it is best to use a
Respuesta
-
stick
-
whisk
-
mixing wheel
-
drum mixer.
Pregunta 17
Pregunta
Extraction systems can be used in a mixing area to minimise
Respuesta
-
slips, trips and falls
-
dust contamination
-
waste build up
-
electric shocks.
Pregunta 18
Pregunta
Hazards can be identified in a designated mixing area by reading the
Respuesta
-
schedule
-
specification
-
risk assessment
-
programme of work.
Pregunta 19
Pregunta
Correct gauging of sand and cement lime mixes is used to ensure
Respuesta
-
faster application
-
correct strength
-
faster set
-
reduced material use.
Pregunta 20
Pregunta
When mixing plaster in a client’s property, what should be used to protect their floor?
Respuesta
-
Plywood sheets.
-
Insulation sheets.
-
Plasterboard sheets.
-
Perspex sheets.